Texas Instruments

DP83816AVNG/NOPB - 10/100 Ethernet PCI Controller | TI

Teilenummer: DP83816AVNG/NOPB ✓ Aktiv
3 V to 3.6 V Vdss 116 mA Id 144-pin LQFP, 20 mm x 20 mm Package
MOQ: 1 |

DP83816AVNG/NOPB Übersicht

The Texas Instruments DP83816AVNG/NOPB is a single-chip 10/100 Mb/s Ethernet controller with an integrated PCI interface and physical layer, supplied in a 144-pin LQFP package measuring 20 mm by 20 mm. It operates from a 3 V to 3.6 V supply and supports a 33 MHz PCI V2.2 bus interface with bus-mastering and power-management support.

An Ethernet controller is an interface integrated circuit that connects a host computer or embedded processor to a physical network. In this device, the PCI controller, Media Access Controller, and 10/100 Mb/s Ethernet physical layer are combined on one die. This integration reduces the number of components required for a PCI-based Ethernet connection while retaining a conventional network medium interface.

The controller supports 10 Mb/s and 100 Mb/s Ethernet operation, making it suitable for systems whose PCI host interface is the governing system bus. Bus mastering allows packet descriptors and data to be transferred directly between Ethernet packet memory and the PCI bus, reducing the processing burden placed on the host CPU. The manufacturer also identifies power-management support as an important operating feature.

The DP83816 targets low-cost, high-volume PC motherboards, PCI network adapter cards, and embedded systems. Its integrated architecture is intended for designers that need both networking and PCI host communication in one controller rather than separate MAC and PHY implementations. The 144-pin LQFP package provides the physical interface required by this mixed-signal peripheral.

A typical implementation places the DP83816 between a PCI host bus and an Ethernet network, with the integrated physical layer providing the interface to twisted-pair cabling. The 3 V to 3.6 V operating range allows use with conventional 3.3 V system rails. The reported 116 mA supply current provides a useful starting point for power budgeting when designing the surrounding regulator and thermal path.

PCB implementation requires careful treatment of the PCI bus and Ethernet physical-layer connections. Follow the manufacturer datasheet for the complete pin description table, recommended external components, clock requirements, and layout constraints. Because this controller combines digital bus signaling with magnetics-coupled Ethernet circuitry, component placement should separate high-current supply routing from sensitive communication paths.

This product overview combines the manufacturer’s architecture description with the exact package, electrical, and environmental values published for DP83816AVNG/NOPB. It also organizes replacement guidance, application fit, comparison parameters, and design notes so engineers can assess the controller before beginning a PCB layout.

Drop-in-Alternativen für DP83816AVNG/NOPB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit DP83816AVNG/NOPB (gleiche Bauform und Footprint) – abweichend in Package, Ethernet Data Rate, Host Interface, Physical Layer, PCI Interface Version.

Texas Instruments
Package: 144-LQFP (20 mm x 20 mm)
Ethernet Data Rate: 10 Mb/s or 100 Mb/s
Host Interface: PCI
Texas Instruments
Package: 144-LQFP (PGE), 20 mm × 20 mm
Ethernet Data Rate: 10 Mb/s and 100 Mb/s
Physical Layer: Internal 10/100 Base-T/TX PHY
Texas Instruments
Package: 144-lead LQFP
Ethernet Data Rate: 10 Mb/s and 100 Mb/s
PCI Interface Version: V2.2
Texas Instruments
Package: 144-LQFP (20 mm x 20 mm)
Ethernet Data Rate: 10 Mb/s and 100 Mb/s
Host Interface: PCI bus

DP83816AVNG-EX/NOPB

✅ Drop-In
Texas Instruments
📦 144-LQFP (20 mm x 20 mm)
Integrated PCI Ethernet MAC and PHY · 10 Mb/s and 100 Mb/s · PCI V2.2 at 33 MHz · IEEE 802.3 · Internal 10/100 Base-T/TX PHY · Supported · 128 dwords (512 bytes) · 3.3 V

Preis auf Anfrage

Datenblatt ansehen →

DP83816AVNG/NOPB Technische Daten

Product Type 10/100 Mb/s integrated PCI Ethernet Media Access Controller and Physical Layer
Ethernet Data Rate 10 Mb/s to 100 Mb/s
Host Interface PCI V2.2 at 33 MHz
Supply Voltage Range 3 V to 3.6 V
Versorgungsstrom 116 mA
Betriebstemperaturbereich 0 °C to +70 °C
Gehäuse 144-pin LQFP, 20 mm x 20 mm
Pin-Anzahl 144 pins
Montageart Surface mount
Data Transfer Method PCI bus mastering
Power Management Support Supported
Ethernet Standard IEEE 802.3
Physical Layer 10BASE-T and 100BASE-TX integrated PHY
Target Systems PC motherboards, adapter cards, and embedded systems

DP83816AVNG/NOPB 144-pin lqfp, 20 mm x 20 mm Pinbelegungsleitfaden

Pinbelegung für DP83816AVNG/NOPB (144-pin lqfp, 20 mm x 20 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für DP83816AVNG/NOPB im 144-pin lqfp, 20 mm x 20 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für DP83816AVNG/NOPB.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

DP83816AVNG/NOPB ist geeignet für 6 Anwendungs: PC Motherboard Ethernet Support, PCI Network Adapter Cards, Embedded PCI Ethernet Systems, Legacy PCI Industrial Control, Managed Network Equipment, Instrumentation and Test Systems.

🖥️

PC Motherboard Ethernet Support

DP83816AVNG/NOPB fits legacy PCI-based PC motherboards that require an integrated 10/100 Mb/s Ethernet connection without allocating separate MAC and PHY devices. Its 33 MHz PCI V2.2 interface and bus-mastering architecture allow packet descriptors and data to transfer directly between packet memory and the host bus, reducing CPU servicing overhead. The 3 V to 3.6 V operating range aligns with conventional 3.3 V motherboard rails. The 144-pin LQFP requires substantial routing space, so this solution is best where an existing motherboard design already accommodates the device footprint.

🌐

PCI Network Adapter Cards

The integrated PCI and Ethernet architecture of DP83816AVNG/NOPB makes it suitable for a dedicated 10/100 Mb/s network adapter card. The Media Access Controller, physical layer, and bus-mastering engine operate from one integrated device, simplifying the adapter’s principal signal path. At 33 MHz, the PCI V2.2 interface targets host platforms that use that bus generation rather than newer PCI Express systems. The controller’s 144-lead LQFP package must be surrounded by the network interface components and magnetics specified by the manufacturer reference design.

🏭

Embedded PCI Ethernet Systems

DP83816AVNG/NOPB is applicable to embedded computers that retain a PCI bus and need an economical 10/100 Mb/s Ethernet interface. Bus mastering reduces the processing burden associated with moving packet data, which is valuable when the embedded host has limited performance or software-paging margin. The device operates across a 3 V to 3.6 V range and includes power-management support for managed host environments. Design engineers should reserve the 20 mm by 20 mm LQFP footprint, follow the manufacturer layout guidance, and validate timing, termination, and magnetics integration on the final board.

⚙️

Legacy PCI Industrial Control

DP83816AVNG/NOPB can serve industrial-control and instrumentation platforms that require deterministic Ethernet communication over a PCI bus. Its integrated 10/100 Mb/s physical layer removes the need for a separate Ethernet PHY in a conventional design, while bus mastering helps the host processor focus on control tasks instead of servicing every packet transfer. The commercial operating range of 0 °C to +70 °C fits controlled indoor equipment. Designers should use the manufacturer datasheet for watchdog, reset, clock, and power-supply sequencing details before adapting the controller to an industrial motherboard.

🗄️

Managed Network Equipment

DP83816AVNG/NOPB is appropriate for managed equipment that relies on a PCI host and needs 10BASE-T or 100BASE-TX connectivity. Its power-management support can help align network activity with the host’s operating states, while the integrated physical layer limits the number of active Ethernet interface components. The device is intended for embedded systems and adapter cards rather than modern PCI Express designs. For network appliances, preserve the manufacturer’s recommended termination and magnetics layout because poor high-frequency return paths can reduce margin even when the nominal data rate is 100 Mb/s.

📡

Instrumentation and Test Systems

DP83816AVNG/NOPB can add network connectivity to instrumentation based on the PCI bus. Its integrated 10/100 Mb/s MAC and PHY support communication with service PCs, supervisors, or laboratory data-collection systems, while bus mastering reduces host-side packet-handling overhead. The 33 MHz PCI V2.2 interface and 0 °C to +70 °C commercial range align with conventional laboratory and industrial-instrumentation platforms. Because this is a large 144-pin mixed-signal device, the implementation should follow the manufacturer pin assignment and layout guidance closely, particularly around supply decoupling and Ethernet network isolation.

What is DP83816AVNG/NOPB?
DP83816AVNG/NOPB is a Texas Instruments single-chip 10/100 Mb/s Ethernet controller that combines a PCI V2.2 host interface, Media Access Controller, and Ethernet physical layer. According to the manufacturer product page, the 33 MHz PCI interface uses bus mastering to transfer packet descriptors and data, while the integrated physical layer connects the controller to a 10 Mb/s or 100 Mb/s Ethernet network. The device is supplied in a 144-pin LQFP package measuring 20 mm by 20 mm.
What is the operating voltage range of DP83816AVNG/NOPB?
DP83816AVNG/NOPB operates from 3 V to 3.6 V. The published component specifications identify this 3.3 V-class operating range and report a supply current of 116 mA. According to the Texas Instruments product documentation, the controller is designed for PC motherboards, PCI adapter cards, and embedded systems. Its PCI V2.2 host interface operates at 33 MHz, while the Ethernet side supports 10 Mb/s and 100 Mb/s network rates.
Where can I download the DP83816AVNG/NOPB datasheet PDF?
The official Texas Instruments product page for DP83816 is the primary location for the manufacturer datasheet, electrical characteristics, ordering information, and package documentation. The manufacturer page is https://www.ti.com/product/DP83816. Use the linked data-sheet document for the complete register description, pin-description table, external-component requirements, timing characteristics, and PCI interface details required to approve a production design.
Where can I find the DP83816AVNG/NOPB pinout?
The DP83816AVNG/NOPB pinout is found in the pin-description table of the manufacturer datasheet for the 144-pin LQFP package. The published package is a 20 mm by 20 mm LQFP with 144 pins. Because the device combines PCI, Ethernet, power, control, and ground connections, use the datasheet’s complete pin table rather than assigning signals from a generic Ethernet-controller diagram. Also consult the datasheet’s layout and external-component sections before routing the board.
What is the DP83816AVNG/NOPB package and pin count?
DP83816AVNG/NOPB is packaged in a 144-pin LQFP measuring 20 mm by 20 mm. The package is a surface-mount gull-wing LQFP, and the published component description identifies 144 terminals. This is a large mixed-signal interface package rather than a compact QFN, so the PCB requires adequate land-pattern geometry, ground-plane planning, and careful separation between the PCI bus and Ethernet physical-layer circuitry.
What Ethernet speeds does DP83816AVNG/NOPB support?
DP83816AVNG/NOPB supports 10 Mb/s and 100 Mb/s Ethernet operation in one integrated controller. The physical layer includes 10BASE-T and 100BASE-TX support, while the host-facing side implements the PCI V2.2 interface at 33 MHz. According to the Texas Instruments product page, this combination was targeted at cost-sensitive PC motherboards, PCI network adapter cards, and embedded systems requiring both PCI connectivity and Ethernet networking.
Why does DP83816AVNG/NOPB use PCI bus mastering?
DP83816AVNG/NOPB uses bus mastering so packet descriptors and Ethernet data can move directly between packet memory and the PCI bus without requiring the host CPU to handle every transfer through repeated software servicing. According to the manufacturer product page, this method reduces the burden on the host processor. The practical benefit is lower CPU involvement during packet movement, which is important in embedded PCI systems where interrupt handling and memory-copy overhead can constrain network performance.
Is DP83816AVNG/NOPB suitable for an embedded PCI system?
Yes, DP83816AVNG/NOPB is suitable for embedded systems that use a PCI host bus and require 10/100 Mb/s Ethernet connectivity. Its 33 MHz PCI V2.2 interface, bus-mastering operation, power-management support, and integrated physical layer match PCI-based embedded platforms. The 3 V to 3.6 V operating range also suits conventional 3.3 V systems, although the complete signal, clock, reset, and component requirements must be checked in the manufacturer datasheet.
DP83816AVNG/NOPB vs DP83816AVNG-EX/NOPB — which one should I choose?
DP83816AVNG-EX/NOPB is the closest listed alternative because it retains the DP83816AVNG family identity, 144-LQFP 20 mm by 20 mm package, IEEE 802.3 Ethernet controller function, PCI interface, and 10/100 Base-T/TX PHY integration. The exact ordering-code differences, temperature coverage, and any lead-time or marking distinctions should be confirmed against the manufacturer ordering information. Both should be treated as same-family PCI Ethernet controller options rather than assumed interchangeable without document review.
When should I choose DP83816AVNG/NOPB instead of DP83822IRHBR?
Choose DP83816AVNG/NOPB when the system requires an integrated 10/100 Mb/s MAC, physical layer, and PCI V2.2 interface in a 144-pin LQFP package. The published cross-reference material lists DP83822IRHBR as a related Ethernet-controller option, but its architecture and package characteristics must be verified before substitution. DP83816 is the better match when direct PCI host integration and the documented 33 MHz bus-mastering design are the central requirements.
What can replace DP83816AVNG/NOPB?
DP83816AVNG-EX/NOPB is the closest listed same-family replacement candidate because it appears under the DP83816AVNG product line and is described as a 144-LQFP Ethernet controller with an IEEE 802.3 10/100 Base-T/TX PHY and PCI interface. Before using it as a drop-in replacement, compare the ordering codes, temperature grade, exposed-pad or termination requirements, and manufacturer pin table. No cross-brand pin-to-pin replacement was established from the available technical documentation.
Is DP83816AVNG/NOPB in stock and what is its lead time?
Current stock and a production lead time should be requested through the Request a Quote form on this page because availability and lead time can change with demand and manufacturing schedules. The manufacturer identifies the DP83816 family for PC motherboards, adapter cards, and embedded systems, while distributor listings provide product information and purchasing references. Use the quote form to confirm the exact DP83816AVNG/NOPB ordering code, quantity, packaging, and current schedule.
Where can I buy DP83816AVNG/NOPB online?
Use the Request a Quote form on this page to request DP83816AVNG/NOPB and obtain a current quotation, stock confirmation, lead time, and proposed shipment quantity. The Texas Instruments product page identifies the product family, while the manufacturer datasheet provides the technical baseline. Before releasing an order, confirm that the quotation uses the exact DP83816AVNG/NOPB ordering code rather than the related DP83816AVNG-EX/NOPB or DP83822IRHBR.
What is the price of DP83816AVNG/NOPB?
Submit the Request a Quote form on this page for the current DP83816AVNG/NOPB quotation. The form should be used to confirm unit pricing, quantity breaks, stock, packaging, and expected lead time for the exact ordering code. Commercial terms can vary with order size and market conditions, so the quote response is the appropriate source for a transaction-ready value and should be reviewed before procurement.
What are the key specifications of DP83816AVNG/NOPB that engineers should know?
DP83816AVNG/NOPB is a 10/100 Mb/s Ethernet controller with an integrated MAC, physical layer, and 33 MHz PCI V2.2 interface. According to the manufacturer product page, bus mastering transfers packet descriptors and data while reducing host-CPU burden. Published specifications identify a 3 V to 3.6 V supply range, 116 mA supply current, commercial 0 °C to +70 °C temperature range, and 144-pin LQFP package measuring 20 mm by 20 mm.
Is DP83816AVNG/NOPB the same as DP83816AVNG-EX/NOPB?
No unconditional equivalence should be assumed. DP83816AVNG-EX/NOPB is the closest listed DP83816-family option and shares the 144-LQFP package and 10/100 Base-T/TX PCI Ethernet-controller description. The suffix still needs to be checked in the manufacturer ordering table for temperature grade, lifecycle, lead finish, and configuration differences. For a production substitution, compare the exact pin, electrical, and qualification requirements rather than relying only on the shared family name.

Technische Referenzdaten für DP83816AVNG/NOPB – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose DP83816AVNG/NOPB for a legacy PCI-based motherboard, adapter card, embedded controller, or instrument that needs an integrated 10/100 Mb/s Ethernet interface. Its 33 MHz PCI V2.2 host interface, bus mastering, integrated MAC and PHY, 3 V to 3.6 V supply range, and 144-LQFP package form a coherent solution when the PCB already accommodates that footprint. Choose DP83816AVNG-EX/NOPB when its ordering-code temperature, qualification, or lifecycle details make it a better fit, but verify those conditions and the complete pin list before substitution. Treat DP83822IRHBR as a redesign candidate rather than a guaranteed drop-in because the published information does not establish identical package, pins, or PCI behavior. This controller is appropriate for 10/100 Mb/s networks, but it should not be selected for a new PCI Express design unless the complete interface requirements are deliberately mapped and validated.

Vergleich mit Alternativen

Parameter Dieses Produkt DP83816AVNG-EX/NOPB
Package 144-LQFP (20 mm x 20 mm) 144-LQFP (20 mm x 20 mm)
Brand Texas Instruments Texas Instruments
Ethernet Data Rate 10 Mb/s to 100 Mb/s 10/100 Base-T/TX
Host Interface PCI V2.2 at 33 MHz PCI interface
Integrated Functions MAC and physical layer Ethernet controller and 10/100 Base-T/TX PHY
Ethernet Standard IEEE 802.3 IEEE 802.3
Target Applications PC motherboards, adapter cards, and embedded systems Ethernet controller

Wichtigste Unterscheidungsmerkmale

  • Combines PCI, MAC, and Ethernet PHY in one controller (vs. DP83822IRHBR)
  • Direct compatibility with the DP83816AVNG 144-LQFP footprint (vs. DP83816AVNG-EX/NOPB)
  • Designed for cost-sensitive PCI systems (vs. DP83822IRHBR)

Designhinweise

Allocate the complete 144-LQFP footprint and follow the Texas Instruments DP83816 layout guidance before placing the Ethernet network interface. Keep the PCI bus traces short and properly referenced to the ground plane, and avoid routing high-current supply paths through the physical-layer area. Decoupling capacitors should connect to the specified power and ground pins with minimal loop length, while the Ethernet magnetics and network-side components should follow the manufacturer’s isolation and component-placement example.

Budget the controller from its published 3 V to 3.6 V operating range and 116 mA supply current. Estimated: using 3.3 V and 116 mA gives 0.3828 W of device input power before regulator efficiency and external Ethernet-interface losses are considered. This estimate does not include connector or magnetics dissipation and should not be used as a substitute for the complete power-budget calculation. Provide local bypass capacitance and verify sequencing requirements in the manufacturer datasheet.

Treat the Ethernet physical-layer section as a high-speed mixed-signal layout and use the manufacturer’s reference network exactly. Maintain the specified separation between the digital PCI domain and the analog or magnetics-coupled network section, provide an uninterrupted ground reference, and avoid placing test-probe points on sensitive network nets. Although the supported rate is 100 Mb/s, correct return paths and component placement remain important for reducing reflections, radiated noise, and susceptibility to external interference.

Do not substitute DP83822IRHBR or another Ethernet controller solely because it offers a similar data rate. The replacement must match the target’s electrical ratings, PCI host behavior, package footprint, pin functions, PHY requirements, and thermal limits. Also verify whether a legacy PCI reference design requires bus-power management, firmware behavior, or specific register initialization. Complete schematic and PCB changes should be validated against the manufacturer documentation and the intended system firmware.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. The published operating-temperature range identifies a commercial-grade device rather than an AEC-Q100-qualified automotive option.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

dp83816avng nopb dp83816avng datasheet DP83816AVNG/NOPB datasheet pdf DP83816AVNG/NOPB pinout DP83816AVNG/NOPB equivalent DP83816AVNG/NOPB replacement DP83816AVNG/NOPB cross reference DP83816AVNG/NOPB footprint DP83816AVNG/NOPB price DP83816AVNG/NOPB stock Texas Instruments DP83816AVNG/NOPB DP83816AVNG/NOPB vs DP83816AVNG-EX/NOPB

Verwandte Bauteile & Begriffe

Texas Instruments DP83816AVNG/NOPB DP83816AVNG-EX/NOPB DP83822IRHBR Ethernet controller Media Access Controller MAC Ethernet physical layer PHY PCI bus PCI V2.2 bus mastering 10BASE-T 100BASE-TX IEEE 802.3 LQFP-144 surface mount 10 Mb/s Ethernet 100 Mb/s Ethernet 33 MHz 3.3 V power management PC motherboard embedded system
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen