DP83816AVNG/NOPB - 10/100 Ethernet PCI Controller | TI
MPN: DP83816AVNG/NOPB ✓ ActiveDP83816AVNG/NOPB Overview
An Ethernet controller is an interface integrated circuit that connects a host computer or embedded processor to a physical network. In this device, the PCI controller, Media Access Controller, and 10/100 Mb/s Ethernet physical layer are combined on one die. This integration reduces the number of components required for a PCI-based Ethernet connection while retaining a conventional network medium interface.
The controller supports 10 Mb/s and 100 Mb/s Ethernet operation, making it suitable for systems whose PCI host interface is the governing system bus. Bus mastering allows packet descriptors and data to be transferred directly between Ethernet packet memory and the PCI bus, reducing the processing burden placed on the host CPU. The manufacturer also identifies power-management support as an important operating feature.
The DP83816 targets low-cost, high-volume PC motherboards, PCI network adapter cards, and embedded systems. Its integrated architecture is intended for designers that need both networking and PCI host communication in one controller rather than separate MAC and PHY implementations. The 144-pin LQFP package provides the physical interface required by this mixed-signal peripheral.
A typical implementation places the DP83816 between a PCI host bus and an Ethernet network, with the integrated physical layer providing the interface to twisted-pair cabling. The 3 V to 3.6 V operating range allows use with conventional 3.3 V system rails. The reported 116 mA supply current provides a useful starting point for power budgeting when designing the surrounding regulator and thermal path.
PCB implementation requires careful treatment of the PCI bus and Ethernet physical-layer connections. Follow the manufacturer datasheet for the complete pin description table, recommended external components, clock requirements, and layout constraints. Because this controller combines digital bus signaling with magnetics-coupled Ethernet circuitry, component placement should separate high-current supply routing from sensitive communication paths.
This product overview combines the manufacturer’s architecture description with the exact package, electrical, and environmental values published for DP83816AVNG/NOPB. It also organizes replacement guidance, application fit, comparison parameters, and design notes so engineers can assess the controller before beginning a PCB layout.
Drop-in alternatives for DP83816AVNG/NOPB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with DP83816AVNG/NOPB (same form factor and footprint) — differing in Package, Ethernet Data Rate, Host Interface, Physical Layer, PCI Interface Version.
DP83816AVNG-EX/NOPB
✅ Drop-InContact for price
View Datasheet →DP83816AVNG/NOPB Specifications
| Product Type | 10/100 Mb/s integrated PCI Ethernet Media Access Controller and Physical Layer |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s |
| Host Interface | PCI V2.2 at 33 MHz |
| Supply Voltage Range | 3 V to 3.6 V |
| Supply Current | 116 mA |
| Operating Temperature Range | 0 °C to +70 °C |
| Package | 144-pin LQFP, 20 mm x 20 mm |
| Pin Count | 144 pins |
| Mounting Type | Surface mount |
| Data Transfer Method | PCI bus mastering |
| Power Management Support | Supported |
| Ethernet Standard | IEEE 802.3 |
| Physical Layer | 10BASE-T and 100BASE-TX integrated PHY |
| Target Systems | PC motherboards, adapter cards, and embedded systems |
DP83816AVNG/NOPB 144-pin lqfp, 20 mm x 20 mm Pin Configuration Guide
Pin configuration for DP83816AVNG/NOPB (144-pin lqfp, 20 mm x 20 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for DP83816AVNG/NOPB.
Refer to the datasheet for full pin configuration.
Typical Applications
DP83816AVNG/NOPB is suitable for 6 applications: PC Motherboard Ethernet Support, PCI Network Adapter Cards, Embedded PCI Ethernet Systems, Legacy PCI Industrial Control, Managed Network Equipment, Instrumentation and Test Systems.
PC Motherboard Ethernet Support
DP83816AVNG/NOPB fits legacy PCI-based PC motherboards that require an integrated 10/100 Mb/s Ethernet connection without allocating separate MAC and PHY devices. Its 33 MHz PCI V2.2 interface and bus-mastering architecture allow packet descriptors and data to transfer directly between packet memory and the host bus, reducing CPU servicing overhead. The 3 V to 3.6 V operating range aligns with conventional 3.3 V motherboard rails. The 144-pin LQFP requires substantial routing space, so this solution is best where an existing motherboard design already accommodates the device footprint.
Recommended
PCI Network Adapter Cards
The integrated PCI and Ethernet architecture of DP83816AVNG/NOPB makes it suitable for a dedicated 10/100 Mb/s network adapter card. The Media Access Controller, physical layer, and bus-mastering engine operate from one integrated device, simplifying the adapter’s principal signal path. At 33 MHz, the PCI V2.2 interface targets host platforms that use that bus generation rather than newer PCI Express systems. The controller’s 144-lead LQFP package must be surrounded by the network interface components and magnetics specified by the manufacturer reference design.
Recommended
Embedded PCI Ethernet Systems
DP83816AVNG/NOPB is applicable to embedded computers that retain a PCI bus and need an economical 10/100 Mb/s Ethernet interface. Bus mastering reduces the processing burden associated with moving packet data, which is valuable when the embedded host has limited performance or software-paging margin. The device operates across a 3 V to 3.6 V range and includes power-management support for managed host environments. Design engineers should reserve the 20 mm by 20 mm LQFP footprint, follow the manufacturer layout guidance, and validate timing, termination, and magnetics integration on the final board.
Recommended
Legacy PCI Industrial Control
DP83816AVNG/NOPB can serve industrial-control and instrumentation platforms that require deterministic Ethernet communication over a PCI bus. Its integrated 10/100 Mb/s physical layer removes the need for a separate Ethernet PHY in a conventional design, while bus mastering helps the host processor focus on control tasks instead of servicing every packet transfer. The commercial operating range of 0 °C to +70 °C fits controlled indoor equipment. Designers should use the manufacturer datasheet for watchdog, reset, clock, and power-supply sequencing details before adapting the controller to an industrial motherboard.
Recommended
Managed Network Equipment
DP83816AVNG/NOPB is appropriate for managed equipment that relies on a PCI host and needs 10BASE-T or 100BASE-TX connectivity. Its power-management support can help align network activity with the host’s operating states, while the integrated physical layer limits the number of active Ethernet interface components. The device is intended for embedded systems and adapter cards rather than modern PCI Express designs. For network appliances, preserve the manufacturer’s recommended termination and magnetics layout because poor high-frequency return paths can reduce margin even when the nominal data rate is 100 Mb/s.
Recommended
Instrumentation and Test Systems
DP83816AVNG/NOPB can add network connectivity to instrumentation based on the PCI bus. Its integrated 10/100 Mb/s MAC and PHY support communication with service PCs, supervisors, or laboratory data-collection systems, while bus mastering reduces host-side packet-handling overhead. The 33 MHz PCI V2.2 interface and 0 °C to +70 °C commercial range align with conventional laboratory and industrial-instrumentation platforms. Because this is a large 144-pin mixed-signal device, the implementation should follow the manufacturer pin assignment and layout guidance closely, particularly around supply decoupling and Ethernet network isolation.
Recommended
Recommended Products Summary
Engineering reference data for DP83816AVNG/NOPB — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DP83816AVNG-EX/NOPB |
|---|---|---|
| Package | 144-LQFP (20 mm x 20 mm) | 144-LQFP (20 mm x 20 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s | 10/100 Base-T/TX |
| Host Interface | PCI V2.2 at 33 MHz | PCI interface |
| Integrated Functions | MAC and physical layer | Ethernet controller and 10/100 Base-T/TX PHY |
| Ethernet Standard | IEEE 802.3 | IEEE 802.3 |
| Target Applications | PC motherboards, adapter cards, and embedded systems | Ethernet controller |
Key Differentiators
- Combines PCI, MAC, and Ethernet PHY in one controller (vs DP83822IRHBR)
- Direct compatibility with the DP83816AVNG 144-LQFP footprint (vs DP83816AVNG-EX/NOPB)
- Designed for cost-sensitive PCI systems (vs DP83822IRHBR)
Design Notes
Allocate the complete 144-LQFP footprint and follow the Texas Instruments DP83816 layout guidance before placing the Ethernet network interface. Keep the PCI bus traces short and properly referenced to the ground plane, and avoid routing high-current supply paths through the physical-layer area. Decoupling capacitors should connect to the specified power and ground pins with minimal loop length, while the Ethernet magnetics and network-side components should follow the manufacturer’s isolation and component-placement example.
Budget the controller from its published 3 V to 3.6 V operating range and 116 mA supply current. Estimated: using 3.3 V and 116 mA gives 0.3828 W of device input power before regulator efficiency and external Ethernet-interface losses are considered. This estimate does not include connector or magnetics dissipation and should not be used as a substitute for the complete power-budget calculation. Provide local bypass capacitance and verify sequencing requirements in the manufacturer datasheet.
Treat the Ethernet physical-layer section as a high-speed mixed-signal layout and use the manufacturer’s reference network exactly. Maintain the specified separation between the digital PCI domain and the analog or magnetics-coupled network section, provide an uninterrupted ground reference, and avoid placing test-probe points on sensitive network nets. Although the supported rate is 100 Mb/s, correct return paths and component placement remain important for reducing reflections, radiated noise, and susceptibility to external interference.
Do not substitute DP83822IRHBR or another Ethernet controller solely because it offers a similar data rate. The replacement must match the target’s electrical ratings, PCI host behavior, package footprint, pin functions, PHY requirements, and thermal limits. Also verify whether a legacy PCI reference design requires bus-power management, firmware behavior, or specific register initialization. Complete schematic and PCB changes should be validated against the manufacturer documentation and the intended system firmware.
Compliance Information
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. The published operating-temperature range identifies a commercial-grade device rather than an AEC-Q100-qualified automotive option.