DP83816AVNG/NOPB - 10/100 Ethernet PCI Controller | TI
MPN: DP83816AVNG/NOPB ✓ 啟用中DP83816AVNG/NOPB 概覽
An Ethernet controller is an interface integrated circuit that connects a host computer or embedded processor to a physical network. In this device, the PCI controller, Media Access Controller, and 10/100 Mb/s Ethernet physical layer are combined on one die. This integration reduces the number of components required for a PCI-based Ethernet connection while retaining a conventional network medium interface.
The controller supports 10 Mb/s and 100 Mb/s Ethernet operation, making it suitable for systems whose PCI host interface is the governing system bus. Bus mastering allows packet descriptors and data to be transferred directly between Ethernet packet memory and the PCI bus, reducing the processing burden placed on the host CPU. The manufacturer also identifies power-management support as an important operating feature.
The DP83816 targets low-cost, high-volume PC motherboards, PCI network adapter cards, and embedded systems. Its integrated architecture is intended for designers that need both networking and PCI host communication in one controller rather than separate MAC and PHY implementations. The 144-pin LQFP package provides the physical interface required by this mixed-signal peripheral.
A typical implementation places the DP83816 between a PCI host bus and an Ethernet network, with the integrated physical layer providing the interface to twisted-pair cabling. The 3 V to 3.6 V operating range allows use with conventional 3.3 V system rails. The reported 116 mA supply current provides a useful starting point for power budgeting when designing the surrounding regulator and thermal path.
PCB implementation requires careful treatment of the PCI bus and Ethernet physical-layer connections. Follow the manufacturer datasheet for the complete pin description table, recommended external components, clock requirements, and layout constraints. Because this controller combines digital bus signaling with magnetics-coupled Ethernet circuitry, component placement should separate high-current supply routing from sensitive communication paths.
This product overview combines the manufacturer’s architecture description with the exact package, electrical, and environmental values published for DP83816AVNG/NOPB. It also organizes replacement guidance, application fit, comparison parameters, and design notes so engineers can assess the controller before beginning a PCB layout.
直接替換替代品,適用於 DP83816AVNG/NOPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DP83816AVNG/NOPB (相同外形與佔位) — 差異在於 Package, Ethernet Data Rate, Host Interface, Physical Layer, PCI Interface Version.
DP83816AVNG-EX/NOPB
✅ 直接替換聯絡詢價
查看資料表 →DP83816AVNG/NOPB 規格
| Product Type | 10/100 Mb/s integrated PCI Ethernet Media Access Controller and Physical Layer |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s |
| Host Interface | PCI V2.2 at 33 MHz |
| Supply Voltage Range | 3 V to 3.6 V |
| 供應電流 | 116 mA |
| 工作溫度範圍 | 0 °C to +70 °C |
| 封裝 | 144-pin LQFP, 20 mm x 20 mm |
| 腳位數 | 144 pins |
| 安裝類型 | Surface mount |
| Data Transfer Method | PCI bus mastering |
| Power Management Support | Supported |
| Ethernet Standard | IEEE 802.3 |
| Physical Layer | 10BASE-T and 100BASE-TX integrated PHY |
| Target Systems | PC motherboards, adapter cards, and embedded systems |
DP83816AVNG/NOPB 144-pin lqfp, 20 mm x 20 mm 腳位配置指南
DP83816AVNG/NOPB(144-pin lqfp, 20 mm x 20 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DP83816AVNG/NOPB.
請參閱 資料表 以查看完整腳位配置。
典型應用
DP83816AVNG/NOPB 適用於 6 應用s: PC Motherboard Ethernet Support, PCI Network Adapter Cards, Embedded PCI Ethernet Systems, Legacy PCI Industrial Control, Managed Network Equipment, Instrumentation and Test Systems.
PC Motherboard Ethernet Support
DP83816AVNG/NOPB fits legacy PCI-based PC motherboards that require an integrated 10/100 Mb/s Ethernet connection without allocating separate MAC and PHY devices. Its 33 MHz PCI V2.2 interface and bus-mastering architecture allow packet descriptors and data to transfer directly between packet memory and the host bus, reducing CPU servicing overhead. The 3 V to 3.6 V operating range aligns with conventional 3.3 V motherboard rails. The 144-pin LQFP requires substantial routing space, so this solution is best where an existing motherboard design already accommodates the device footprint.
推薦
PCI Network Adapter Cards
The integrated PCI and Ethernet architecture of DP83816AVNG/NOPB makes it suitable for a dedicated 10/100 Mb/s network adapter card. The Media Access Controller, physical layer, and bus-mastering engine operate from one integrated device, simplifying the adapter’s principal signal path. At 33 MHz, the PCI V2.2 interface targets host platforms that use that bus generation rather than newer PCI Express systems. The controller’s 144-lead LQFP package must be surrounded by the network interface components and magnetics specified by the manufacturer reference design.
推薦
Embedded PCI Ethernet Systems
DP83816AVNG/NOPB is applicable to embedded computers that retain a PCI bus and need an economical 10/100 Mb/s Ethernet interface. Bus mastering reduces the processing burden associated with moving packet data, which is valuable when the embedded host has limited performance or software-paging margin. The device operates across a 3 V to 3.6 V range and includes power-management support for managed host environments. Design engineers should reserve the 20 mm by 20 mm LQFP footprint, follow the manufacturer layout guidance, and validate timing, termination, and magnetics integration on the final board.
推薦
Legacy PCI Industrial Control
DP83816AVNG/NOPB can serve industrial-control and instrumentation platforms that require deterministic Ethernet communication over a PCI bus. Its integrated 10/100 Mb/s physical layer removes the need for a separate Ethernet PHY in a conventional design, while bus mastering helps the host processor focus on control tasks instead of servicing every packet transfer. The commercial operating range of 0 °C to +70 °C fits controlled indoor equipment. Designers should use the manufacturer datasheet for watchdog, reset, clock, and power-supply sequencing details before adapting the controller to an industrial motherboard.
推薦
Managed Network Equipment
DP83816AVNG/NOPB is appropriate for managed equipment that relies on a PCI host and needs 10BASE-T or 100BASE-TX connectivity. Its power-management support can help align network activity with the host’s operating states, while the integrated physical layer limits the number of active Ethernet interface components. The device is intended for embedded systems and adapter cards rather than modern PCI Express designs. For network appliances, preserve the manufacturer’s recommended termination and magnetics layout because poor high-frequency return paths can reduce margin even when the nominal data rate is 100 Mb/s.
推薦
Instrumentation and Test Systems
DP83816AVNG/NOPB can add network connectivity to instrumentation based on the PCI bus. Its integrated 10/100 Mb/s MAC and PHY support communication with service PCs, supervisors, or laboratory data-collection systems, while bus mastering reduces host-side packet-handling overhead. The 33 MHz PCI V2.2 interface and 0 °C to +70 °C commercial range align with conventional laboratory and industrial-instrumentation platforms. Because this is a large 144-pin mixed-signal device, the implementation should follow the manufacturer pin assignment and layout guidance closely, particularly around supply decoupling and Ethernet network isolation.
推薦
推薦產品摘要
工程參考資料,適用於 DP83816AVNG/NOPB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DP83816AVNG-EX/NOPB |
|---|---|---|
| Package | 144-LQFP (20 mm x 20 mm) | 144-LQFP (20 mm x 20 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s | 10/100 Base-T/TX |
| Host Interface | PCI V2.2 at 33 MHz | PCI interface |
| Integrated Functions | MAC and physical layer | Ethernet controller and 10/100 Base-T/TX PHY |
| Ethernet Standard | IEEE 802.3 | IEEE 802.3 |
| Target Applications | PC motherboards, adapter cards, and embedded systems | Ethernet controller |
主要差異化特點
- Combines PCI, MAC, and Ethernet PHY in one controller (對比DP83822IRHBR)
- Direct compatibility with the DP83816AVNG 144-LQFP footprint (對比DP83816AVNG-EX/NOPB)
- Designed for cost-sensitive PCI systems (對比DP83822IRHBR)
設計說明
Allocate the complete 144-LQFP footprint and follow the Texas Instruments DP83816 layout guidance before placing the Ethernet network interface. Keep the PCI bus traces short and properly referenced to the ground plane, and avoid routing high-current supply paths through the physical-layer area. Decoupling capacitors should connect to the specified power and ground pins with minimal loop length, while the Ethernet magnetics and network-side components should follow the manufacturer’s isolation and component-placement example.
Budget the controller from its published 3 V to 3.6 V operating range and 116 mA supply current. Estimated: using 3.3 V and 116 mA gives 0.3828 W of device input power before regulator efficiency and external Ethernet-interface losses are considered. This estimate does not include connector or magnetics dissipation and should not be used as a substitute for the complete power-budget calculation. Provide local bypass capacitance and verify sequencing requirements in the manufacturer datasheet.
Treat the Ethernet physical-layer section as a high-speed mixed-signal layout and use the manufacturer’s reference network exactly. Maintain the specified separation between the digital PCI domain and the analog or magnetics-coupled network section, provide an uninterrupted ground reference, and avoid placing test-probe points on sensitive network nets. Although the supported rate is 100 Mb/s, correct return paths and component placement remain important for reducing reflections, radiated noise, and susceptibility to external interference.
Do not substitute DP83822IRHBR or another Ethernet controller solely because it offers a similar data rate. The replacement must match the target’s electrical ratings, PCI host behavior, package footprint, pin functions, PHY requirements, and thermal limits. Also verify whether a legacy PCI reference design requires bus-power management, firmware behavior, or specific register initialization. Complete schematic and PCB changes should be validated against the manufacturer documentation and the intended system firmware.
合規資訊
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. The published operating-temperature range identifies a commercial-grade device rather than an AEC-Q100-qualified automotive option.