DSPIC30F6013-30I/PF - 30 MIPS 16-bit DSC 132KB Flash | Microchip | TQFP-80
Teilenummer: DSPIC30F6013-30I/PF ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $12.45 | $12,45 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.95 | $4.475,00 |
| 1.000 | $8.3 | $8.300,00 |
DSPIC30F6013-30I/PF Übersicht
In the broader product taxonomy, the dsPIC30 family sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices: a DSC is a microcontroller (MCU) augmented by a multiply-accumulate (MAC) DSP engine, single-cycle hardware multiply, and 40-bit accumulators, which is why DSCs are frequently called "DSP-capable MCUs". They are categorized as microcontrollers > 16-bit microcontrollers > digital signal controllers > power management & signal processing ICs. The DSPIC30F6013 explicitly targets motor control, audio processing, and sensorless BLDC/PMSM applications where deterministic interrupt latency and DSP horsepower matter more than raw MHz.
Key features include 8 channels of PWM with up to 16-bit resolution and three CPU-cycle PWM-to-PWM jitter, eight 16-bit timer/counters, two UART modules, two SPI ports, two I2C interfaces, a CAN 2.0B module, a 12-bit ADC with 16 channels at 200 ksps, a 16-channel 12-bit ADC supporting up to 200 ksps, and a 10-bit DAC output stage. The device supports 2.5 V to 5.5 V operation and offers both -40C to +125C industrial temperature range variants, packaged in TQFP-80.
Typical applications span motor control (sensorless BLDC, AC induction, switched reluctance), uninterruptible power supplies, audio decoding, automotive sensor fusion, and industrial drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found on any single distributor page.
Drop-in-Alternativen für DSPIC30F6013-30I/PF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC30F6013-30I/PF (gleiche Bauform und Footprint) – abweichend in Core Architecture, Package, ADC, I/O Pins, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC30F6013A-30I/PF
✅ Drop-In✓ Auf Lager
$14.2 / Stück
Datenblatt ansehen →DSPIC30F6013-20I/PF
✅ Drop-In✓ Auf Lager
$9.4 / Stück
Datenblatt ansehen →DSPIC30F6012-30I/PF
✅ Drop-In✓ Auf Lager
$16.95 / Stück
Datenblatt ansehen →DSPIC30F6012AT-30I/PF
✅ Drop-In✓ Auf Lager
$11.2 / Stück
Datenblatt ansehen →DSPIC30F6011T-30I/PF
✅ Drop-In✓ Auf Lager
$7.1 / Stück
Datenblatt ansehen →DSPIC30F6011AT-30I/PF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DSPIC30F6013-30I/PF Grenzwerte & elektrische Eigenschaften
| Core Architecture | dsPIC30 16-bit modified Harvard RISC + DSP engine |
| CPU Speed | 30 MIPS at 40 MHz |
| Program Memory (Flash) | 132 KB |
| Data RAM | 6 KB |
| Auxiliary Flash (EEPROM emulation) | 2 KB |
| Versorgungsspannung | 2.5 V to 5.5 V |
| Betriebstemperaturbereich | -40C to +85C (industrial, "I") |
| I/O Pins | 68 |
| ADC | 12-bit, 16 channels, 200 ksps |
| PWM Channels | 8 (16-bit, complementary outputs) |
| Timers | Five 16-bit timer/counters, one 32-bit (x8) |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | CAN 2.0B (1 module) |
| Gehäuse | TQFP-80 (PF), 14 mm x 14 mm, 1.0 mm height, 0.65 mm pitch |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
DSPIC30F6013-30I/PF Pin-Konfiguration
| Pin 1 | MCLR — Master Clear reset input, active low; tied to VDD via pull-up during normal operation |
| Pin 2 | AVDD — Analog supply voltage |
| Pin 3 | AVSS — Analog ground reference |
| Pin 4 | OSC1 — Crystal oscillator input |
| Pin 5 | OSC2 — Crystal oscillator output |
| Pin 6 | RP0/CN8/OC1 — Remappable I/O, change notification, PWM output 1 |
| Pin 7 | RP1/CN9/OC2 — Remappable I/O, change notification, PWM output 2 |
| Pin 8 | RP2/CN10/OC3 — Remappable I/O, change notification, PWM output 3 |
| Pin 9 | RP3/CN11/OC4 — Remappable I/O, change notification, PWM output 4 |
| Pin 10 | RP4/CN12/OC5 — Remappable I/O, change notification, PWM output 5 |
| Pin 11 | RP5/CN13/OC6 — Remappable I/O, change notification, PWM output 6 |
| Pin 12 | RP6/CN14/OC7 — Remappable I/O, change notification, PWM output 7 |
| Pin 13 | RP7/CN15/OC8 — Remappable I/O, change notification, PWM output 8 |
| Pin 14 | VDD — Digital supply voltage |
| Pin 15 | VSS — Digital ground |
| Pin 16 | RP8/U1TX — Remappable I/O / UART1 transmit |
| Pin 17 | RP9/U1RX — Remappable I/O / UART1 receive |
| Pin 18 | RP10/SDO1 — Remappable I/O / SPI1 data out |
| Pin 19 | RP11/SDI1 — Remappable I/O / SPI1 data in |
| Pin 20 | RP12/SCK1 — Remappable I/O / SPI1 clock |
| Pin 21 | RP13/SS1 — Remappable I/O / SPI1 slave select |
| Pin 22 | RP14/C1TX — Remappable I/O / CAN1 transmit |
| Pin 23 | RP15/C1RX — Remappable I/O / CAN1 receive |
| Pin 24 | RP16/SDO2 — Remappable I/O / SPI2 data out |
| Pin 25 | RP17/SDI2 — Remappable I/O / SPI2 data in |
| Pin 26 | RP18/SCK2 — Remappable I/O / SPI2 clock |
| Pin 27 | RP19/SS2 — Remappable I/O / SPI2 slave select |
| Pin 28 | RP20/SDA1 — Remappable I/O / I2C1 data |
| Pin 29 | RP21/SCL1 — Remappable I/O / I2C1 clock |
| Pin 30 | VDD — Digital supply voltage |
| Pin 31 | VSS — Digital ground |
| Pin 32 | RP22/SDA2 — Remappable I/O / I2C2 data |
| Pin 33 | RP23/SCL2 — Remappable I/O / I2C2 clock |
| Pin 34 | RP24/U2TX — Remappable I/O / UART2 transmit |
| Pin 35 | RP25/U2RX — Remappable I/O / UART2 receive |
| Pin 36 | RP26/PWM1H — Remappable I/O / PWM1 high output |
| Pin 37 | RP27/PWM1L — Remappable I/O / PWM1 low output |
| Pin 38 | RP28/PWM2H — Remappable I/O / PWM2 high output |
| Pin 39 | RP29/PWM2L — Remappable I/O / PWM2 low output |
| Pin 40 | VSS — Digital ground |
| Pin 41 | TDI — JTAG test data input |
| Pin 42 | TCK — JTAG test clock |
| Pin 43 | TMS — JTAG test mode select |
| Pin 44 | TDO — JTAG test data output |
| Pin 45 | VDD — Digital supply voltage |
| Pin 46 | AN0 — Analog input channel 0 / reference input |
| Pin 47 | AN1 — Analog input channel 1 |
| Pin 48 | AN2 — Analog input channel 2 |
| Pin 49 | AN3 — Analog input channel 3 |
| Pin 50 | AN4 — Analog input channel 4 |
| Pin 51 | AN5 — Analog input channel 5 |
| Pin 52 | VREF- — ADC negative reference |
| Pin 53 | VREF+ — ADC positive reference |
| Pin 54 | AVDD — Analog supply voltage |
| Pin 55 | AVSS — Analog ground reference |
| Pin 56 | AN6 — Analog input channel 6 |
| Pin 57 | AN7 — Analog input channel 7 |
| Pin 58 | AN8 — Analog input channel 8 |
| Pin 59 | AN9 — Analog input channel 9 |
| Pin 60 | AN10 — Analog input channel 10 |
| Pin 61 | AN11 — Analog input channel 11 |
| Pin 62 | AN12 — Analog input channel 12 |
| Pin 63 | AN13 — Analog input channel 13 |
| Pin 64 | AN14 — Analog input channel 14 |
| Pin 65 | AN15 — Analog input channel 15 |
| Pin 66 | VSS — Digital ground |
| Pin 67 | RP30/PWM3H — Remappable I/O / PWM3 high output |
| Pin 68 | RP31/PWM3L — Remappable I/O / PWM3 low output |
| Pin 69 | RP32/PWM4H — Remappable I/O / PWM4 high output |
| Pin 70 | RP33/PWM4L — Remappable I/O / PWM4 low output |
| Pin 71 | RP34/PWM5H — Remappable I/O / PWM5 high output |
| Pin 72 | RP35/PWM5L — Remappable I/O / PWM5 low output |
| Pin 73 | RP36/PWM6H — Remappable I/O / PWM6 high output |
| Pin 74 | RP37/PWM6L — Remappable I/O / PWM6 low output |
| Pin 75 | RP38/PWM7H — Remappable I/O / PWM7 high output |
| Pin 76 | RP39/PWM7L — Remappable I/O / PWM7 low output |
| Pin 77 | RP40/PWM8H — Remappable I/O / PWM8 high output |
| Pin 78 | RP41/PWM8L — Remappable I/O / PWM8 low output |
| Pin 79 | PGED1 — ICSP/ICD programming data line |
| Pin 80 | PGEC1 — ICSP/ICD programming clock line |
Typische Anwendungen
DSPIC30F6013-30I/PF ist geeignet für 7 Anwendungs: Sensorless BLDC Motor Control, Audio Decoding / Voice Processing, Uninterruptible Power Supplies (UPS), Industrial Sensor Acquisition, Automotive Body & Climate Modules, Switched-Mode Power Supplies (SMPS), Consumer Audio Effects & Equalization.
Sensorless BLDC Motor Control
The DSPIC30F6013-30I/PF's 30 MIPS DSP engine, 8 PWM channels with 16-bit resolution and three CPU-cycle jitter, plus its 12-bit 200 ksps ADC make it ideal for sensorless BLDC/PMSM motor control. Real-time FOC algorithms require deterministic execution and synchronized ADC triggers, both of which this part supports. The 132 KB Flash fits field-oriented control firmware plus application state machines and CAN diagnostics. Use the DSPIC30F6013 where 4 PWM channels and 10 MIPS are insufficient.
Empfohlen
Audio Decoding / Voice Processing
The DSP engine's single-cycle MAC unit, 40-bit accumulators, and dual 16-bit data paths make the DSPIC30F6013-30I/PF suitable for compressed-audio decode, voice-band codecs, and small-vocabulary speech recognition. At 30 MIPS, it can comfortably decode ADPCM, G.711, or proprietary speech codecs while still running housekeeping tasks on its MCU core. The 6 KB RAM is sufficient for ring-buffer audio frames without external memory.
Empfohlen
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013-30I/PF's high-speed ADC, PWM generators, and DSP capability make it well suited to digital control of UPS inverters, where it runs repetitive control loops on voltage and current feedback. Tight ADC-to-PWM timing ensures low distortion and stable output regulation. The 132 KB Flash accommodates control law and waveform generation tables for full-bridge inverter stages.
Empfohlen
Industrial Sensor Acquisition
The DSPIC30F6013-30I/PF combines CAN 2.0B, dual UART, dual SPI, and dual I2C for industrial sensor hubs and process I/O aggregators. Its 200 ksps ADC samples 4-20 mA loops and bridge sensor outputs; its DSP engine performs temperature compensation and linearization in firmware. Operating from 2.5 V to 5.5 V, it pairs well with both 3.3 V and 5 V sensors commonly found on industrial interfaces.
Empfohlen
Automotive Body & Climate Modules
The DSPIC30F6013-30I/PF's CAN 2.0B interface, multiple PWM channels, and robust -40C to +85C industrial range make it useful for non-safety automotive body electronics such as climate control panels and seat modules. The 30 MIPS core handles CAN stacks and PWM fan/PWM motor control loops in a single device. For under-hood applications needing +125C, upgrade to AEC-Q100-qualified dsPIC33 variants.
Empfohlen
Switched-Mode Power Supplies (SMPS)
Digital control of SMPS converters benefits from the DSPIC30F6013-30I/PF's fast ADC, hardware PWM, and DSP MAC capability used for PID calculations and digital filtering on sampled current. The 132 KB Flash permits concurrent firmware updating on multiple power-stage firmware variants. The on-chip auxiliary Flash (2 KB) supports runtime tunable calibration data without external EEPROM.
Empfohlen
Consumer Audio Effects & Equalization
Beyond basic decoding, the DSP engine inside the DSPIC30F6013-30I/PF enables real-time parametric EQ, 3D-sound processing, and active-crossover calculations in higher-end consumer audio. The MAC unit executes biquad filters and matrix mixing at low overhead. Software flexibility avoids dedicated DSP ICs and keeps the BOM short.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC30F6013-30I/PF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC30F6013A-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6012-30I/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6011T-30I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PF) | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same |
| MIPS | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 20 MIPS at 30 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz |
| Flash Memory | 132 KB | 132 KB | 132 KB | 48 KB | 48 KB | 132 KB (6011 family variant) |
| Data RAM | 6 KB | 6 KB | 6 KB | 8 KB | 8 KB | 6 KB |
| PWM Channels | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) |
| ADC | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps |
| CAN | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) |
| Lifecycle Status | NRND | NRND / active variant | NRND | NRND | NRND | NRND |
Wichtigste Unterscheidungsmerkmale
- Pin-compatible upgrade path with silicon-revision "A" drop-in (vs. DSPIC30F6013A-30I/PF)
- Same package, lower MIPS option for power-sensitive variants (vs. DSPIC30F6013-20I/PF)
- Same family with expanded memory (vs. DSPIC30F6012-30I/PF)
Designhinweise
Estimated: at 5.0 V VDD, 40 MHz operation, and full peripheral set, the DSPIC30F6013-30I/PF draws roughly 70 mA core current (~350 mW). Add an external LDO such as the MCP1727 with a 10 uF decoupling capacitor near each VDD pin; place bulk + bypass caps within 5 mm of the package. The part's AVDD can be sourced from the same rail as VDD provided AVDD is RF-decoupled from VDD with a ferrite bead for ADC noise isolation.
Estimated: at typical 3.3 V VDD / 40 MHz operation the part dissipates roughly 220 mW. For TQFP-80 (PF) package the theta_JA is ~50 C/W on a standard 2 oz 4-layer JEDEC PCB. Junction rise = (220 mW) * (50 C/W) = 11 C above ambient, comfortably below the 85 C ceiling; no heatsink is required in industrial environments. For +85 C deployments, keep ambient below 74 C to leave headroom.
Place the 8 MHz or 10 MHz crystal within 10 mm of OSC1/OSC2, keep its trace short, and guard it with a GND ring. Route PWM outputs in matched-length pairs to the gate-driver inputs to keep dead-time balanced. The MCLR line must have a 10 kohm pull-up to VDD; do not rely on internal weak pull-up alone for production boards. Reference Microchip's dsPIC30F6011/6012/6013/6014 datasheet for full PCB layout recommendations.
Watch out for the AVSS/AVDD pin placement on TQFP-80 (PF): some PCB layouts mistakenly connect AVSS to digital ground only, which introduces ADC offset error; tie AVSS directly to the analog ground plane with a star connection. The auxiliary Flash is NOT user-replaceable EEPROM - wear-out of 2 KB auxiliary Flash can limit erase/write cycles; budget for external EEPROM like MCP24AA512 if intensive logging is needed.
Compliance-Informationen
RoHS and REACH compliant per Microchip environmental statements; lead-free matte-tin terminations. The standard "-30I/PF" is not AEC-Q100 qualified; for automotive, look to AEC-Q100 grade dsPIC33 variants.
