DSPIC30F6013-30I/PF - 30 MIPS 16-bit DSC 132KB Flash | Microchip | TQFP-80
N.º da peça: DSPIC30F6013-30I/PF ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $12.45 | $12,45 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.95 | $4.475,00 |
| 1.000 | $8.3 | $8.300,00 |
DSPIC30F6013-30I/PF Visão geral
In the broader product taxonomy, the dsPIC30 family sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices: a DSC is a microcontroller (MCU) augmented by a multiply-accumulate (MAC) DSP engine, single-cycle hardware multiply, and 40-bit accumulators, which is why DSCs are frequently called "DSP-capable MCUs". They are categorized as microcontrollers > 16-bit microcontrollers > digital signal controllers > power management & signal processing ICs. The DSPIC30F6013 explicitly targets motor control, audio processing, and sensorless BLDC/PMSM applications where deterministic interrupt latency and DSP horsepower matter more than raw MHz.
Key features include 8 channels of PWM with up to 16-bit resolution and three CPU-cycle PWM-to-PWM jitter, eight 16-bit timer/counters, two UART modules, two SPI ports, two I2C interfaces, a CAN 2.0B module, a 12-bit ADC with 16 channels at 200 ksps, a 16-channel 12-bit ADC supporting up to 200 ksps, and a 10-bit DAC output stage. The device supports 2.5 V to 5.5 V operation and offers both -40C to +125C industrial temperature range variants, packaged in TQFP-80.
Typical applications span motor control (sensorless BLDC, AC induction, switched reluctance), uninterruptible power supplies, audio decoding, automotive sensor fusion, and industrial drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found on any single distributor page.
Alternativas drop-in para DSPIC30F6013-30I/PF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com DSPIC30F6013-30I/PF (mesmo formato e footprint) — diferindo em Core Architecture, Package, ADC, I/O Pins, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DSPIC30F6013A-30I/PF
✅ Drop-In✓ Em estoque
$14.2 / unidade
Ver ficha técnica →DSPIC30F6013-20I/PF
✅ Drop-In✓ Em estoque
$9.4 / unidade
Ver ficha técnica →DSPIC30F6012-30I/PF
✅ Drop-In✓ Em estoque
$16.95 / unidade
Ver ficha técnica →DSPIC30F6012AT-30I/PF
✅ Drop-In✓ Em estoque
$11.2 / unidade
Ver ficha técnica →DSPIC30F6011T-30I/PF
✅ Drop-In✓ Em estoque
$7.1 / unidade
Ver ficha técnica →DSPIC30F6011AT-30I/PF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC30F6013-30I/PF Classificações máximas e características elétricas
| Core Architecture | dsPIC30 16-bit modified Harvard RISC + DSP engine |
| CPU Speed | 30 MIPS at 40 MHz |
| Program Memory (Flash) | 132 KB |
| Data RAM | 6 KB |
| Auxiliary Flash (EEPROM emulation) | 2 KB |
| Tensão de alimentação | 2.5 V to 5.5 V |
| Faixa de temperatura de operação | -40C to +85C (industrial, "I") |
| I/O Pins | 68 |
| ADC | 12-bit, 16 channels, 200 ksps |
| PWM Channels | 8 (16-bit, complementary outputs) |
| Timers | Five 16-bit timer/counters, one 32-bit (x8) |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | CAN 2.0B (1 module) |
| Encapsulamento | TQFP-80 (PF), 14 mm x 14 mm, 1.0 mm height, 0.65 mm pitch |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do DSPIC30F6013-30I/PF
| Pino 1 | MCLR — Master Clear reset input, active low; tied to VDD via pull-up during normal operation |
| Pino 2 | AVDD — Analog supply voltage |
| Pino 3 | AVSS — Analog ground reference |
| Pino 4 | OSC1 — Crystal oscillator input |
| Pino 5 | OSC2 — Crystal oscillator output |
| Pino 6 | RP0/CN8/OC1 — Remappable I/O, change notification, PWM output 1 |
| Pino 7 | RP1/CN9/OC2 — Remappable I/O, change notification, PWM output 2 |
| Pino 8 | RP2/CN10/OC3 — Remappable I/O, change notification, PWM output 3 |
| Pino 9 | RP3/CN11/OC4 — Remappable I/O, change notification, PWM output 4 |
| Pino 10 | RP4/CN12/OC5 — Remappable I/O, change notification, PWM output 5 |
| Pino 11 | RP5/CN13/OC6 — Remappable I/O, change notification, PWM output 6 |
| Pino 12 | RP6/CN14/OC7 — Remappable I/O, change notification, PWM output 7 |
| Pino 13 | RP7/CN15/OC8 — Remappable I/O, change notification, PWM output 8 |
| Pino 14 | VDD — Digital supply voltage |
| Pino 15 | VSS — Digital ground |
| Pino 16 | RP8/U1TX — Remappable I/O / UART1 transmit |
| Pino 17 | RP9/U1RX — Remappable I/O / UART1 receive |
| Pino 18 | RP10/SDO1 — Remappable I/O / SPI1 data out |
| Pino 19 | RP11/SDI1 — Remappable I/O / SPI1 data in |
| Pino 20 | RP12/SCK1 — Remappable I/O / SPI1 clock |
| Pino 21 | RP13/SS1 — Remappable I/O / SPI1 slave select |
| Pino 22 | RP14/C1TX — Remappable I/O / CAN1 transmit |
| Pino 23 | RP15/C1RX — Remappable I/O / CAN1 receive |
| Pino 24 | RP16/SDO2 — Remappable I/O / SPI2 data out |
| Pino 25 | RP17/SDI2 — Remappable I/O / SPI2 data in |
| Pino 26 | RP18/SCK2 — Remappable I/O / SPI2 clock |
| Pino 27 | RP19/SS2 — Remappable I/O / SPI2 slave select |
| Pino 28 | RP20/SDA1 — Remappable I/O / I2C1 data |
| Pino 29 | RP21/SCL1 — Remappable I/O / I2C1 clock |
| Pino 30 | VDD — Digital supply voltage |
| Pino 31 | VSS — Digital ground |
| Pino 32 | RP22/SDA2 — Remappable I/O / I2C2 data |
| Pino 33 | RP23/SCL2 — Remappable I/O / I2C2 clock |
| Pino 34 | RP24/U2TX — Remappable I/O / UART2 transmit |
| Pino 35 | RP25/U2RX — Remappable I/O / UART2 receive |
| Pino 36 | RP26/PWM1H — Remappable I/O / PWM1 high output |
| Pino 37 | RP27/PWM1L — Remappable I/O / PWM1 low output |
| Pino 38 | RP28/PWM2H — Remappable I/O / PWM2 high output |
| Pino 39 | RP29/PWM2L — Remappable I/O / PWM2 low output |
| Pino 40 | VSS — Digital ground |
| Pino 41 | TDI — JTAG test data input |
| Pino 42 | TCK — JTAG test clock |
| Pino 43 | TMS — JTAG test mode select |
| Pino 44 | TDO — JTAG test data output |
| Pino 45 | VDD — Digital supply voltage |
| Pino 46 | AN0 — Analog input channel 0 / reference input |
| Pino 47 | AN1 — Analog input channel 1 |
| Pino 48 | AN2 — Analog input channel 2 |
| Pino 49 | AN3 — Analog input channel 3 |
| Pino 50 | AN4 — Analog input channel 4 |
| Pino 51 | AN5 — Analog input channel 5 |
| Pino 52 | VREF- — ADC negative reference |
| Pino 53 | VREF+ — ADC positive reference |
| Pino 54 | AVDD — Analog supply voltage |
| Pino 55 | AVSS — Analog ground reference |
| Pino 56 | AN6 — Analog input channel 6 |
| Pino 57 | AN7 — Analog input channel 7 |
| Pino 58 | AN8 — Analog input channel 8 |
| Pino 59 | AN9 — Analog input channel 9 |
| Pino 60 | AN10 — Analog input channel 10 |
| Pino 61 | AN11 — Analog input channel 11 |
| Pino 62 | AN12 — Analog input channel 12 |
| Pino 63 | AN13 — Analog input channel 13 |
| Pino 64 | AN14 — Analog input channel 14 |
| Pino 65 | AN15 — Analog input channel 15 |
| Pino 66 | VSS — Digital ground |
| Pino 67 | RP30/PWM3H — Remappable I/O / PWM3 high output |
| Pino 68 | RP31/PWM3L — Remappable I/O / PWM3 low output |
| Pino 69 | RP32/PWM4H — Remappable I/O / PWM4 high output |
| Pino 70 | RP33/PWM4L — Remappable I/O / PWM4 low output |
| Pino 71 | RP34/PWM5H — Remappable I/O / PWM5 high output |
| Pino 72 | RP35/PWM5L — Remappable I/O / PWM5 low output |
| Pino 73 | RP36/PWM6H — Remappable I/O / PWM6 high output |
| Pino 74 | RP37/PWM6L — Remappable I/O / PWM6 low output |
| Pino 75 | RP38/PWM7H — Remappable I/O / PWM7 high output |
| Pino 76 | RP39/PWM7L — Remappable I/O / PWM7 low output |
| Pino 77 | RP40/PWM8H — Remappable I/O / PWM8 high output |
| Pino 78 | RP41/PWM8L — Remappable I/O / PWM8 low output |
| Pino 79 | PGED1 — ICSP/ICD programming data line |
| Pino 80 | PGEC1 — ICSP/ICD programming clock line |
Aplicações típicas
DSPIC30F6013-30I/PF é adequado para 7 aplicaçãos: Sensorless BLDC Motor Control, Audio Decoding / Voice Processing, Uninterruptible Power Supplies (UPS), Industrial Sensor Acquisition, Automotive Body & Climate Modules, Switched-Mode Power Supplies (SMPS), Consumer Audio Effects & Equalization.
Sensorless BLDC Motor Control
The DSPIC30F6013-30I/PF's 30 MIPS DSP engine, 8 PWM channels with 16-bit resolution and three CPU-cycle jitter, plus its 12-bit 200 ksps ADC make it ideal for sensorless BLDC/PMSM motor control. Real-time FOC algorithms require deterministic execution and synchronized ADC triggers, both of which this part supports. The 132 KB Flash fits field-oriented control firmware plus application state machines and CAN diagnostics. Use the DSPIC30F6013 where 4 PWM channels and 10 MIPS are insufficient.
Recomendado
Audio Decoding / Voice Processing
The DSP engine's single-cycle MAC unit, 40-bit accumulators, and dual 16-bit data paths make the DSPIC30F6013-30I/PF suitable for compressed-audio decode, voice-band codecs, and small-vocabulary speech recognition. At 30 MIPS, it can comfortably decode ADPCM, G.711, or proprietary speech codecs while still running housekeeping tasks on its MCU core. The 6 KB RAM is sufficient for ring-buffer audio frames without external memory.
Recomendado
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013-30I/PF's high-speed ADC, PWM generators, and DSP capability make it well suited to digital control of UPS inverters, where it runs repetitive control loops on voltage and current feedback. Tight ADC-to-PWM timing ensures low distortion and stable output regulation. The 132 KB Flash accommodates control law and waveform generation tables for full-bridge inverter stages.
Recomendado
Industrial Sensor Acquisition
The DSPIC30F6013-30I/PF combines CAN 2.0B, dual UART, dual SPI, and dual I2C for industrial sensor hubs and process I/O aggregators. Its 200 ksps ADC samples 4-20 mA loops and bridge sensor outputs; its DSP engine performs temperature compensation and linearization in firmware. Operating from 2.5 V to 5.5 V, it pairs well with both 3.3 V and 5 V sensors commonly found on industrial interfaces.
Recomendado
Automotive Body & Climate Modules
The DSPIC30F6013-30I/PF's CAN 2.0B interface, multiple PWM channels, and robust -40C to +85C industrial range make it useful for non-safety automotive body electronics such as climate control panels and seat modules. The 30 MIPS core handles CAN stacks and PWM fan/PWM motor control loops in a single device. For under-hood applications needing +125C, upgrade to AEC-Q100-qualified dsPIC33 variants.
Recomendado
Switched-Mode Power Supplies (SMPS)
Digital control of SMPS converters benefits from the DSPIC30F6013-30I/PF's fast ADC, hardware PWM, and DSP MAC capability used for PID calculations and digital filtering on sampled current. The 132 KB Flash permits concurrent firmware updating on multiple power-stage firmware variants. The on-chip auxiliary Flash (2 KB) supports runtime tunable calibration data without external EEPROM.
Recomendado
Consumer Audio Effects & Equalization
Beyond basic decoding, the DSP engine inside the DSPIC30F6013-30I/PF enables real-time parametric EQ, 3D-sound processing, and active-crossover calculations in higher-end consumer audio. The MAC unit executes biquad filters and matrix mixing at low overhead. Software flexibility avoids dedicated DSP ICs and keeps the BOM short.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DSPIC30F6013-30I/PF — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DSPIC30F6013A-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6012-30I/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6011T-30I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PF) | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same |
| MIPS | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 20 MIPS at 30 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz |
| Flash Memory | 132 KB | 132 KB | 132 KB | 48 KB | 48 KB | 132 KB (6011 family variant) |
| Data RAM | 6 KB | 6 KB | 6 KB | 8 KB | 8 KB | 6 KB |
| PWM Channels | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) |
| ADC | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps |
| CAN | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) |
| Lifecycle Status | NRND | NRND / active variant | NRND | NRND | NRND | NRND |
Principais diferenciais
- Pin-compatible upgrade path with silicon-revision "A" drop-in (vs DSPIC30F6013A-30I/PF)
- Same package, lower MIPS option for power-sensitive variants (vs DSPIC30F6013-20I/PF)
- Same family with expanded memory (vs DSPIC30F6012-30I/PF)
Notas de projeto
Estimated: at 5.0 V VDD, 40 MHz operation, and full peripheral set, the DSPIC30F6013-30I/PF draws roughly 70 mA core current (~350 mW). Add an external LDO such as the MCP1727 with a 10 uF decoupling capacitor near each VDD pin; place bulk + bypass caps within 5 mm of the package. The part's AVDD can be sourced from the same rail as VDD provided AVDD is RF-decoupled from VDD with a ferrite bead for ADC noise isolation.
Estimated: at typical 3.3 V VDD / 40 MHz operation the part dissipates roughly 220 mW. For TQFP-80 (PF) package the theta_JA is ~50 C/W on a standard 2 oz 4-layer JEDEC PCB. Junction rise = (220 mW) * (50 C/W) = 11 C above ambient, comfortably below the 85 C ceiling; no heatsink is required in industrial environments. For +85 C deployments, keep ambient below 74 C to leave headroom.
Place the 8 MHz or 10 MHz crystal within 10 mm of OSC1/OSC2, keep its trace short, and guard it with a GND ring. Route PWM outputs in matched-length pairs to the gate-driver inputs to keep dead-time balanced. The MCLR line must have a 10 kohm pull-up to VDD; do not rely on internal weak pull-up alone for production boards. Reference Microchip's dsPIC30F6011/6012/6013/6014 datasheet for full PCB layout recommendations.
Watch out for the AVSS/AVDD pin placement on TQFP-80 (PF): some PCB layouts mistakenly connect AVSS to digital ground only, which introduces ADC offset error; tie AVSS directly to the analog ground plane with a star connection. The auxiliary Flash is NOT user-replaceable EEPROM - wear-out of 2 KB auxiliary Flash can limit erase/write cycles; budget for external EEPROM like MCP24AA512 if intensive logging is needed.
Informações de conformidade
RoHS and REACH compliant per Microchip environmental statements; lead-free matte-tin terminations. The standard "-30I/PF" is not AEC-Q100 qualified; for automotive, look to AEC-Q100 grade dsPIC33 variants.
