DSPIC30F6013-30I/PF - 30 MIPS 16-bit DSC 132KB Flash | Microchip | TQFP-80
部品番号: DSPIC30F6013-30I/PF ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $12.45 | $12.45 |
| 10 | $11.2 | $112.00 |
| 100 | $9.85 | $985.00 |
| 500 | $8.95 | $4,475.00 |
| 1,000 | $8.3 | $8,300.00 |
DSPIC30F6013-30I/PF 概要
In the broader product taxonomy, the dsPIC30 family sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex devices: a DSC is a microcontroller (MCU) augmented by a multiply-accumulate (MAC) DSP engine, single-cycle hardware multiply, and 40-bit accumulators, which is why DSCs are frequently called "DSP-capable MCUs". They are categorized as microcontrollers > 16-bit microcontrollers > digital signal controllers > power management & signal processing ICs. The DSPIC30F6013 explicitly targets motor control, audio processing, and sensorless BLDC/PMSM applications where deterministic interrupt latency and DSP horsepower matter more than raw MHz.
Key features include 8 channels of PWM with up to 16-bit resolution and three CPU-cycle PWM-to-PWM jitter, eight 16-bit timer/counters, two UART modules, two SPI ports, two I2C interfaces, a CAN 2.0B module, a 12-bit ADC with 16 channels at 200 ksps, a 16-channel 12-bit ADC supporting up to 200 ksps, and a 10-bit DAC output stage. The device supports 2.5 V to 5.5 V operation and offers both -40C to +125C industrial temperature range variants, packaged in TQFP-80.
Typical applications span motor control (sensorless BLDC, AC induction, switched reluctance), uninterruptible power supplies, audio decoding, automotive sensor fusion, and industrial drives. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found on any single distributor page.
ドロップイン代替品: DSPIC30F6013-30I/PF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC30F6013-30I/PF （同一形状・フットプリント） — 相違点: Core Architecture, Package, ADC, I/O Pins, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC30F6013A-30I/PF
✅ ドロップイン✓ 在庫あり
$14.2 / 個
データシートを見る →DSPIC30F6013-20I/PF
✅ ドロップイン✓ 在庫あり
$9.4 / 個
データシートを見る →DSPIC30F6012-30I/PF
✅ ドロップイン✓ 在庫あり
$16.95 / 個
データシートを見る →DSPIC30F6012AT-30I/PF
✅ ドロップイン✓ 在庫あり
$11.2 / 個
データシートを見る →DSPIC30F6011T-30I/PF
✅ ドロップイン✓ 在庫あり
$7.1 / 個
データシートを見る →DSPIC30F6011AT-30I/PF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
DSPIC30F6013-30I/PF 最大定格＆電気的特性
| Core Architecture | dsPIC30 16-bit modified Harvard RISC + DSP engine |
| CPU Speed | 30 MIPS at 40 MHz |
| Program Memory (Flash) | 132 KB |
| Data RAM | 6 KB |
| Auxiliary Flash (EEPROM emulation) | 2 KB |
| 電源電圧 | 2.5 V to 5.5 V |
| 動作温度範囲 | -40C to +85C (industrial, "I") |
| I/O Pins | 68 |
| ADC | 12-bit, 16 channels, 200 ksps |
| PWM Channels | 8 (16-bit, complementary outputs) |
| Timers | Five 16-bit timer/counters, one 32-bit (x8) |
| UART | 2 modules |
| SPI | 2 modules |
| I2C | 2 modules |
| CAN | CAN 2.0B (1 module) |
| パッケージ | TQFP-80 (PF), 14 mm x 14 mm, 1.0 mm height, 0.65 mm pitch |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
DSPIC30F6013-30I/PF ピン構成
| ピン 1 | MCLR — Master Clear reset input, active low; tied to VDD via pull-up during normal operation |
| ピン 2 | AVDD — Analog supply voltage |
| ピン 3 | AVSS — Analog ground reference |
| ピン 4 | OSC1 — Crystal oscillator input |
| ピン 5 | OSC2 — Crystal oscillator output |
| ピン 6 | RP0/CN8/OC1 — Remappable I/O, change notification, PWM output 1 |
| ピン 7 | RP1/CN9/OC2 — Remappable I/O, change notification, PWM output 2 |
| ピン 8 | RP2/CN10/OC3 — Remappable I/O, change notification, PWM output 3 |
| ピン 9 | RP3/CN11/OC4 — Remappable I/O, change notification, PWM output 4 |
| ピン 10 | RP4/CN12/OC5 — Remappable I/O, change notification, PWM output 5 |
| ピン 11 | RP5/CN13/OC6 — Remappable I/O, change notification, PWM output 6 |
| ピン 12 | RP6/CN14/OC7 — Remappable I/O, change notification, PWM output 7 |
| ピン 13 | RP7/CN15/OC8 — Remappable I/O, change notification, PWM output 8 |
| ピン 14 | VDD — Digital supply voltage |
| ピン 15 | VSS — Digital ground |
| ピン 16 | RP8/U1TX — Remappable I/O / UART1 transmit |
| ピン 17 | RP9/U1RX — Remappable I/O / UART1 receive |
| ピン 18 | RP10/SDO1 — Remappable I/O / SPI1 data out |
| ピン 19 | RP11/SDI1 — Remappable I/O / SPI1 data in |
| ピン 20 | RP12/SCK1 — Remappable I/O / SPI1 clock |
| ピン 21 | RP13/SS1 — Remappable I/O / SPI1 slave select |
| ピン 22 | RP14/C1TX — Remappable I/O / CAN1 transmit |
| ピン 23 | RP15/C1RX — Remappable I/O / CAN1 receive |
| ピン 24 | RP16/SDO2 — Remappable I/O / SPI2 data out |
| ピン 25 | RP17/SDI2 — Remappable I/O / SPI2 data in |
| ピン 26 | RP18/SCK2 — Remappable I/O / SPI2 clock |
| ピン 27 | RP19/SS2 — Remappable I/O / SPI2 slave select |
| ピン 28 | RP20/SDA1 — Remappable I/O / I2C1 data |
| ピン 29 | RP21/SCL1 — Remappable I/O / I2C1 clock |
| ピン 30 | VDD — Digital supply voltage |
| ピン 31 | VSS — Digital ground |
| ピン 32 | RP22/SDA2 — Remappable I/O / I2C2 data |
| ピン 33 | RP23/SCL2 — Remappable I/O / I2C2 clock |
| ピン 34 | RP24/U2TX — Remappable I/O / UART2 transmit |
| ピン 35 | RP25/U2RX — Remappable I/O / UART2 receive |
| ピン 36 | RP26/PWM1H — Remappable I/O / PWM1 high output |
| ピン 37 | RP27/PWM1L — Remappable I/O / PWM1 low output |
| ピン 38 | RP28/PWM2H — Remappable I/O / PWM2 high output |
| ピン 39 | RP29/PWM2L — Remappable I/O / PWM2 low output |
| ピン 40 | VSS — Digital ground |
| ピン 41 | TDI — JTAG test data input |
| ピン 42 | TCK — JTAG test clock |
| ピン 43 | TMS — JTAG test mode select |
| ピン 44 | TDO — JTAG test data output |
| ピン 45 | VDD — Digital supply voltage |
| ピン 46 | AN0 — Analog input channel 0 / reference input |
| ピン 47 | AN1 — Analog input channel 1 |
| ピン 48 | AN2 — Analog input channel 2 |
| ピン 49 | AN3 — Analog input channel 3 |
| ピン 50 | AN4 — Analog input channel 4 |
| ピン 51 | AN5 — Analog input channel 5 |
| ピン 52 | VREF- — ADC negative reference |
| ピン 53 | VREF+ — ADC positive reference |
| ピン 54 | AVDD — Analog supply voltage |
| ピン 55 | AVSS — Analog ground reference |
| ピン 56 | AN6 — Analog input channel 6 |
| ピン 57 | AN7 — Analog input channel 7 |
| ピン 58 | AN8 — Analog input channel 8 |
| ピン 59 | AN9 — Analog input channel 9 |
| ピン 60 | AN10 — Analog input channel 10 |
| ピン 61 | AN11 — Analog input channel 11 |
| ピン 62 | AN12 — Analog input channel 12 |
| ピン 63 | AN13 — Analog input channel 13 |
| ピン 64 | AN14 — Analog input channel 14 |
| ピン 65 | AN15 — Analog input channel 15 |
| ピン 66 | VSS — Digital ground |
| ピン 67 | RP30/PWM3H — Remappable I/O / PWM3 high output |
| ピン 68 | RP31/PWM3L — Remappable I/O / PWM3 low output |
| ピン 69 | RP32/PWM4H — Remappable I/O / PWM4 high output |
| ピン 70 | RP33/PWM4L — Remappable I/O / PWM4 low output |
| ピン 71 | RP34/PWM5H — Remappable I/O / PWM5 high output |
| ピン 72 | RP35/PWM5L — Remappable I/O / PWM5 low output |
| ピン 73 | RP36/PWM6H — Remappable I/O / PWM6 high output |
| ピン 74 | RP37/PWM6L — Remappable I/O / PWM6 low output |
| ピン 75 | RP38/PWM7H — Remappable I/O / PWM7 high output |
| ピン 76 | RP39/PWM7L — Remappable I/O / PWM7 low output |
| ピン 77 | RP40/PWM8H — Remappable I/O / PWM8 high output |
| ピン 78 | RP41/PWM8L — Remappable I/O / PWM8 low output |
| ピン 79 | PGED1 — ICSP/ICD programming data line |
| ピン 80 | PGEC1 — ICSP/ICD programming clock line |
主な用途
DSPIC30F6013-30I/PF の用途: 7 件s: Sensorless BLDC Motor Control, Audio Decoding / Voice Processing, Uninterruptible Power Supplies (UPS), Industrial Sensor Acquisition, Automotive Body & Climate Modules, Switched-Mode Power Supplies (SMPS), Consumer Audio Effects & Equalization.
Sensorless BLDC Motor Control
The DSPIC30F6013-30I/PF's 30 MIPS DSP engine, 8 PWM channels with 16-bit resolution and three CPU-cycle jitter, plus its 12-bit 200 ksps ADC make it ideal for sensorless BLDC/PMSM motor control. Real-time FOC algorithms require deterministic execution and synchronized ADC triggers, both of which this part supports. The 132 KB Flash fits field-oriented control firmware plus application state machines and CAN diagnostics. Use the DSPIC30F6013 where 4 PWM channels and 10 MIPS are insufficient.
おすすめ
Audio Decoding / Voice Processing
The DSP engine's single-cycle MAC unit, 40-bit accumulators, and dual 16-bit data paths make the DSPIC30F6013-30I/PF suitable for compressed-audio decode, voice-band codecs, and small-vocabulary speech recognition. At 30 MIPS, it can comfortably decode ADPCM, G.711, or proprietary speech codecs while still running housekeeping tasks on its MCU core. The 6 KB RAM is sufficient for ring-buffer audio frames without external memory.
おすすめ
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013-30I/PF's high-speed ADC, PWM generators, and DSP capability make it well suited to digital control of UPS inverters, where it runs repetitive control loops on voltage and current feedback. Tight ADC-to-PWM timing ensures low distortion and stable output regulation. The 132 KB Flash accommodates control law and waveform generation tables for full-bridge inverter stages.
おすすめ
Industrial Sensor Acquisition
The DSPIC30F6013-30I/PF combines CAN 2.0B, dual UART, dual SPI, and dual I2C for industrial sensor hubs and process I/O aggregators. Its 200 ksps ADC samples 4-20 mA loops and bridge sensor outputs; its DSP engine performs temperature compensation and linearization in firmware. Operating from 2.5 V to 5.5 V, it pairs well with both 3.3 V and 5 V sensors commonly found on industrial interfaces.
おすすめ
Automotive Body & Climate Modules
The DSPIC30F6013-30I/PF's CAN 2.0B interface, multiple PWM channels, and robust -40C to +85C industrial range make it useful for non-safety automotive body electronics such as climate control panels and seat modules. The 30 MIPS core handles CAN stacks and PWM fan/PWM motor control loops in a single device. For under-hood applications needing +125C, upgrade to AEC-Q100-qualified dsPIC33 variants.
おすすめ
Switched-Mode Power Supplies (SMPS)
Digital control of SMPS converters benefits from the DSPIC30F6013-30I/PF's fast ADC, hardware PWM, and DSP MAC capability used for PID calculations and digital filtering on sampled current. The 132 KB Flash permits concurrent firmware updating on multiple power-stage firmware variants. The on-chip auxiliary Flash (2 KB) supports runtime tunable calibration data without external EEPROM.
おすすめ
Consumer Audio Effects & Equalization
Beyond basic decoding, the DSP engine inside the DSPIC30F6013-30I/PF enables real-time parametric EQ, 3D-sound processing, and active-crossover calculations in higher-end consumer audio. The MAC unit executes biquad filters and matrix mixing at low overhead. Software flexibility avoids dedicated DSP ICs and keeps the BOM short.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC30F6013-30I/PF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC30F6013A-30I/PF | DSPIC30F6013-20I/PF | DSPIC30F6012-30I/PF | DSPIC30F6012AT-30I/PF | DSPIC30F6011T-30I/PF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-80 (PF) | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same | TQFP-80 (PF) - same |
| MIPS | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 20 MIPS at 30 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz | 30 MIPS at 40 MHz |
| Flash Memory | 132 KB | 132 KB | 132 KB | 48 KB | 48 KB | 132 KB (6011 family variant) |
| Data RAM | 6 KB | 6 KB | 6 KB | 8 KB | 8 KB | 6 KB |
| PWM Channels | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) | 8 (16-bit) |
| ADC | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps | 12-bit, 16-ch, 200 ksps |
| CAN | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) | 1 (CAN 2.0B) |
| Lifecycle Status | NRND | NRND / active variant | NRND | NRND | NRND | NRND |
主な差別化要因
- Pin-compatible upgrade path with silicon-revision "A" drop-in （vs DSPIC30F6013A-30I/PF)
- Same package, lower MIPS option for power-sensitive variants （vs DSPIC30F6013-20I/PF)
- Same family with expanded memory （vs DSPIC30F6012-30I/PF)
設計ノート
Estimated: at 5.0 V VDD, 40 MHz operation, and full peripheral set, the DSPIC30F6013-30I/PF draws roughly 70 mA core current (~350 mW). Add an external LDO such as the MCP1727 with a 10 uF decoupling capacitor near each VDD pin; place bulk + bypass caps within 5 mm of the package. The part's AVDD can be sourced from the same rail as VDD provided AVDD is RF-decoupled from VDD with a ferrite bead for ADC noise isolation.
Estimated: at typical 3.3 V VDD / 40 MHz operation the part dissipates roughly 220 mW. For TQFP-80 (PF) package the theta_JA is ~50 C/W on a standard 2 oz 4-layer JEDEC PCB. Junction rise = (220 mW) * (50 C/W) = 11 C above ambient, comfortably below the 85 C ceiling; no heatsink is required in industrial environments. For +85 C deployments, keep ambient below 74 C to leave headroom.
Place the 8 MHz or 10 MHz crystal within 10 mm of OSC1/OSC2, keep its trace short, and guard it with a GND ring. Route PWM outputs in matched-length pairs to the gate-driver inputs to keep dead-time balanced. The MCLR line must have a 10 kohm pull-up to VDD; do not rely on internal weak pull-up alone for production boards. Reference Microchip's dsPIC30F6011/6012/6013/6014 datasheet for full PCB layout recommendations.
Watch out for the AVSS/AVDD pin placement on TQFP-80 (PF): some PCB layouts mistakenly connect AVSS to digital ground only, which introduces ADC offset error; tie AVSS directly to the analog ground plane with a star connection. The auxiliary Flash is NOT user-replaceable EEPROM - wear-out of 2 KB auxiliary Flash can limit erase/write cycles; budget for external EEPROM like MCP24AA512 if intensive logging is needed.
コンプライアンス情報
RoHS and REACH compliant per Microchip environmental statements; lead-free matte-tin terminations. The standard "-30I/PF" is not AEC-Q100 qualified; for automotive, look to AEC-Q100 grade dsPIC33 variants.
