EMC5R0N - 16GB Industrial eMMC 5.1 pSLC | Silicon Power
Teilenummer: EMC5R0N ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.85 | $118,50 |
| 100 | $10.95 | $1.095,00 |
| 500 | $9.85 | $4.925,00 |
| 1.000 | $8.95 | $8.950,00 |
EMC5R0N Übersicht
An eMMC (embedded MultiMediaCard) is a managed NAND flash memory solution that integrates the NAND flash array, controller, and JEDEC-standard MMC interface into a single BGA package. eMMC 5.1 (JEDEC JESD84-B51) is widely adopted as embedded boot and bulk storage in industrial gateways, HMI panels, point-of-sale terminals, and ruggedized computing platforms because it simplifies host-side design by offloading flash management to the device. Within the memory IC hierarchy, eMMC sits between raw NAND (raw flash requiring external controller) and higher-level storage such as UFS and SSD, offering a balanced compromise of density, cost, and design simplicity.
Key features of the EMC5R0N include 16 GB density, pSLC NAND cell mode (one bit per cell emulating SLC endurance), up to 30,000 P/E cycles (10x the endurance of standard TLC eMMC), JEDEC eMMC 5.1 compliance with HS400 interface, and industrial temperature support. The pSLC mode trades effective capacity for higher endurance, making the EMC5R0N well suited to journaling filesystems, transaction logging, and other write-heavy applications where TLC would wear out prematurely.
The controller inside the EMC5R0N implements JEDEC-standard firmware features including secure erase, secure trim, write protection (permanent and temporary), partitions, and enhanced area configuration. Internal ECC and wear-leveling algorithms extend the effective lifetime of the pSLC cells. The host interface supports 1-bit, 4-bit, and 8-bit MMC buses at clock rates up to 200 MHz in HS400 mode.
Typical applications include industrial IoT gateways, factory automation controllers, automotive infotainment boot media, point-of-sale terminals, medical data recorders, and ruggedized HMI panels. Compared with raw NAND solutions, the integrated controller dramatically reduces host processor overhead and firmware development time, accelerating time to market for embedded products.
When designing with this device, ensure the host platform provides a 1.8V or 3.3V VCCQ supply, a 3.3V VCC flash supply, and that the PCB layout meets JEDEC eMMC signal-integrity guidelines. Use proper decoupling and follow the reference schematic from the Silicon Power Industrial factsheet to avoid signal-integrity issues on high-speed MMC lanes.
This page synthesizes distributor availability, pSLC endurance metrics, and application guidance not consolidated in any single Silicon Power product bulletin.
Drop-in-Alternativen für EMC5R0N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EMC5R0N (gleiche Bauform und Footprint) – abweichend in Memory Type, NAND Technology, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EMC3R0N
✅ Drop-In✓ Auf Lager
$8.95 / Stück
Datenblatt ansehen →EMC5R0N Grenzwerte & elektrische Eigenschaften
| Speichertyp | eMMC 5.1 (JEDEC JESD84-B51) |
| Density | 16 GB |
| NAND Technology | pSLC (pseudo-SLC, emulated from MLC/TLC) |
| Endurance (P/E Cycles) | up to 30,000 |
| Interface Bus Width | 1-bit / 4-bit / 8-bit MMC |
| Maximum Clock Rate | 200 MHz (HS400 mode) |
| Gehäuse | 153-ball FBGA |
| Betriebstemperatur | -40C to +85C (industrial) |
| Supply Voltage - Flash (VCC) | 2.7 V to 3.6 V |
| Supply Voltage - Interface (VCCQ) | 1.7 V to 1.95 V or 2.7 V to 3.6 V |
| Montageart | Surface Mount |
| Series | SP Industrial eMMC 5.1 Series |
| Family Variant | EMC5R0N (16GB pSLC); EMC3R0N (32/64/128GB TLC) |
| RoHS-Status | Compliant |
| Managed NAND Features | Internal ECC, wear-leveling, secure erase/trim, write protection, partitions |
EMC5R0N 153-ball fbga Pinbelegungsleitfaden
Pinbelegung für EMC5R0N (153-ball fbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EMC5R0N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EMC5R0N ist geeignet für 6 Anwendungs: Industrial IoT Gateway Storage, Factory Automation Controller, Point-of-Sale (POS) Terminal, Medical Data Recorder, Ruggedized HMI Panel, Automotive Infotainment Boot Media.
Industrial IoT Gateway Storage
The EMC5R0N fits industrial IoT gateways because its 16 GB pSLC capacity with up to 30,000 P/E cycles easily absorbs the constant write traffic from local log buffering, MQTT message queuing, and OTA staging. The JEDEC eMMC 5.1 (HS400, 200 MHz) interface offloads flash management from the gateway host processor, freeing CPU cycles for protocol stacks (Modbus, OPC UA, MQTT). At -40C to +85C industrial temperature range and 153-ball FBGA compact footprint, it survives factory-floor deployment in sealed enclosures without thermal throttling concerns.
Empfohlen
Factory Automation Controller
In factory automation PLCs and CNC controllers, the EMC5R0N's pSLC 30,000 P/E endurance supports frequent write cycles from real-time process data logging, alarm journaling, and recipe storage without premature wear-out. The eMMC 5.1 managed NAND architecture integrates ECC and wear-leveling on-die, eliminating host-side flash translation layer (FTL) development and accelerating time to market. The 153-ball FBGA package with industrial -40C to +85C rating tolerates the thermal cycling common in control cabinet installations near motors and drives.
Empfohlen
Point-of-Sale (POS) Terminal
The EMC5R0N suits POS terminals where transaction logging generates continuous small-block writes to local storage between network availability. With up to 30,000 P/E cycles in pSLC mode, the EMC5R0N outlasts standard TLC eMMC by approximately 10x in journaling filesystems such as ext4 or f2fs used for transaction databases. Its 16 GB density is sufficient for OS image, application binaries, and several days of offline transaction buffering. The compact 153-ball FBGA enables slim terminal form factors required in retail environments.
Empfohlen
Medical Data Recorder
Medical bedside monitors and ambulatory data recorders require non-volatile storage that survives continuous sample logging without data loss. The EMC5R0N's pSLC mode (30,000 P/E cycles) and industrial -40C to +85C rating match the write endurance and environmental demands of patient monitoring applications. JEDEC eMMC 5.1 standardized commands (secure erase, secure trim) support end-of-life data sanitization required by HIPAA and similar medical data regulations. The integrated controller provides deterministic wear-leveling that healthcare QA teams can validate against device lifetime targets.
Empfohlen
Ruggedized HMI Panel
Industrial HMI panels in washdown or outdoor environments benefit from the EMC5R0N's industrial temperature rating and solder-down 153-ball FBGA package, which eliminates connector failure points common with removable media. The eMMC 5.1 interface provides fast boot times (HS400 mode) so HMI screens initialize quickly on power-up, important for operator workflow. Its pSLC endurance handles frequent screen-update writes to local databases tracking batch state, alarm history, and operator actions.
Empfohlen
Automotive Infotainment Boot Media
Although the EMC5R0N itself is industrial-grade (not AEC-Q100), the same Silicon Power eMMC 5.1 platform can serve as a reference design entry point for automotive infotainment boot and navigation map storage. The JEDEC eMMC 5.1 HS400 interface provides fast boot times for IVI systems. Designers targeting full automotive qualification should consult Silicon Power Industrial for AEC-Q100 variants or confirm whether the EMC5R0N platform can meet automotive reliability targets in their specific deployment.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EMC5R0N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EMC3R0N |
|---|---|---|
| Brand | Silicon Power | Silicon Power |
| Package | 153-ball FBGA | 153-ball FBGA (same family) |
| Density | 16 GB | 32 / 64 / 128 GB |
| NAND Mode | pSLC | TLC |
| P/E Cycles | up to 30,000 | up to 3,000 |
| Interface | eMMC 5.1 (HS400) | eMMC 5.1 (HS400) |
| Operating Temperature | -40C to +85C | -40C to +85C |
| Use Case Fit | Write-intensive / journaling | Read-mostly / bulk storage |
Wichtigste Unterscheidungsmerkmale
- pSLC mode delivers 10x higher endurance (vs. EMC3R0N)
- Highest endurance-per-GB in Silicon Power eMMC 5.1 family (vs. EMC3R0N)
Designhinweise
The EMC5R0N 153-ball FBGA requires matched-impedance routing on the MMC clock (CLK) and data (DAT0-DAT7) traces, with characteristic impedance of 50 ohm to ground and length matching within the JEDEC eMMC 5.1 specification. Place decoupling capacitors (0.1 uF and 1 uF) as close as possible to VCC and VCCQ balls. Use a continuous ground plane beneath the BGA to control return paths for high-speed HS400 signaling at 200 MHz.
Provide both VCC (2.7-3.6 V, flash supply) and VCCQ (1.7-1.95 V or 2.7-3.6 V, interface supply) rails from independent LDO regulators. Power-up sequencing should follow JEDEC eMMC 5.1: VCC first, then VCCQ, with the host holding CMD line low until both supplies stabilize. Inrush current during initialization can reach 200 mA; ensure regulator current rating includes headroom for peak inrush.
Estimated: at 30,000 P/E cycles with 16 GB pSLC capacity and assuming average write amplification factor of 2.5 for typical journaling workloads, total host writes are approximately 1.2 PB before endurance exhaustion. Do not assume pSLC delivers full SLC endurance; the effective endurance scales with NAND process node and write pattern. Always validate endurance against your actual workload using vendor tools before deployment.
Compliance-Informationen
RoHS compliance confirmed by Silicon Power Industrial product bulletin. AEC-Q100 not qualified - industrial grade only. REACH, halogen-free, and conflict-minerals declarations should be requested from Silicon Power Industrial.
