EPF10K50VRC240-1N - FLEX 10K 50K-Gate FPGA, 189 I/O | Intel
Teilenummer: EPF10K50VRC240-1N ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $48.5 | $48,50 |
| 10 | $42 | $420,00 |
| 100 | $36.5 | $3.650,00 |
| 500 | $32 | $16.000,00 |
| 1.000 | $28.5 | $28.500,00 |
EPF10K50VRC240-1N Übersicht
What is an FPGA? A Field-Programmable Gate Array is a semiconductor IC composed of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that engineers can re-program in the field to implement arbitrary digital functions. FPGAs sit above microcontrollers, DSPs, and ASICs in the design flexibility hierarchy: they are slower per gate than ASICs but offer parallel processing, rapid prototyping, and hardware-level reconfigurability that microcontrollers cannot match. The FLEX 10K family pioneered the embedded array block (EAB), which allows on-chip implementation of RAM, ROM, and arithmetic functions alongside the general-purpose logic array.
Key features of the EPF10K50VRC240-1N include 20,480 typical logic gates, 360 Logic Array Blocks (LABs), 2,880 logic cells (per DigiKey listing), embedded array blocks (EABs) for memory functions, in-system programmability (ISP) via the serial configuration interface, multi-volt I/O support, and JTAG boundary-scan test per IEEE Std 1149.1. The 'V' in the part number denotes 3.3 V operation, the 'RC240' identifies the 240-pin Power QFP package with exposed pad, the '1' indicates the speed grade, and 'N' indicates a lead-free commercial-temperature version.
From an architecture standpoint, the FLEX 10K device integrates continuous interconnect structures (FastTrack) with an array of LABs and EABs, allowing designers to combine wide logic functions with on-chip memory in a single die. The exposed pad on the BFQFP package provides a low-thermal-resistance path for heat dissipation, which is critical at 250 MHz internal operation and 66.67 MHz system performance.
Typical applications for the EPF10K50VRC240-1N include communications glue logic, industrial control state machines, PCI bus interfaces, DSP co-processing, prototyping of ASIC designs, and embedded system-on-chip integration. It is also used in legacy telecom infrastructure where the FLEX 10K architecture has long been deployed.
When designing with this device, ensure proper decoupling (typically 0.1 µF and 10 µF capacitors near each power pin) and thermal relief through the exposed pad to a sufficient copper pour. Designers should also budget configuration time and choose between serial or parallel configuration modes via the Quartus or MAX+PLUS II design tools.
This page synthesizes distributor pricing, drop-in FLEX 10K alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für EPF10K50VRC240-1N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EPF10K50VRC240-1N (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Family, Speed Grade, Series.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EPF10K50VRC240-1
✅ Drop-In✓ Auf Lager
$130.32 / Stück
Datenblatt ansehen →EPF10K50VRC240-2N
✅ Drop-In✓ Auf Lager
$81.2 / Stück
Datenblatt ansehen →EPF10K50VRC240-3N
✅ Drop-In✓ Auf Lager
$58.75 / Stück
Datenblatt ansehen →EPF10K50VRC240-4N
✅ Drop-In✓ Auf Lager
$89.5 / Stück
Datenblatt ansehen →EPF10K50RC240-4
✅ Drop-In✓ Auf Lager
$36.5 / Stück
Datenblatt ansehen →EPF10K50VRC240-1N Grenzwerte & elektrische Eigenschaften
| Family | FLEX 10K |
| Series | FLEX-10K® |
| Typical Gates | 50,000 |
| Logic Elements / Cells | 2,880 |
| Logic Array Blocks (LABs) | 360 |
| User I/Os | 189 |
| Anzahl der Pins | 240 |
| Gehäuse | 240-BFQFP Exposed Pad (RQFP) |
| Process Technology | 0.42 µm CMOS |
| Internal Frequency | 66.67 MHz |
| Propagation Delay | 0.6 ns (speed grade -1) |
| Supply Voltage (Core) | 3.3 V |
| Betriebstemperatur | 0°C to +70°C (Commercial) |
| Programming Method | In-system programmable (ISP) / SRAM-based |
| Montageart | Surface Mount |
| RoHS-Status | Compliant (lead-free 'N' suffix) |
| Brand / Manufacturer | Intel (formerly Altera) |
EPF10K50VRC240-1N 240-bfqfp exposed pad (rqfp) Pinbelegungsleitfaden
Pinbelegung für EPF10K50VRC240-1N (240-bfqfp exposed pad (rqfp)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EPF10K50VRC240-1N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EPF10K50VRC240-1N ist geeignet für 6 Anwendungs: Legacy Telecom Glue Logic, Industrial Control State Machines, PCI Bus Interface Bridging, DSP Co-Processing Accelerator, ASIC Prototyping Platform, Embedded System-on-Chip Integration.
Legacy Telecom Glue Logic
The EPF10K50VRC240-1N's 50,000-gate capacity and 189 user I/Os make it well-suited for legacy telecom infrastructure where wide bus interfaces, glue logic, and protocol conversion between E1/T1 framers and backplane ASICs are required. Its 66.67 MHz internal frequency supports typical telecom line rates, while the FLEX 10K embedded array blocks (EABs) provide on-chip FIFOs and small RAM/ROM blocks needed for channelized framing. The 240-pin BFQFP package exposes enough I/O to bridge legacy 8/16/32-bit parallel buses without external bus expander logic. Engineers maintaining installed telecom base stations or DSLAM line cards find this part well-matched to the deterministic timing behavior of FLEX 10K silicon.
Empfohlen
Industrial Control State Machines
With 2,880 logic cells, 360 LABs, and 189 I/Os, the EPF10K50VRC240-1N integrates complex state machines, encoder counters, and PID controllers for industrial automation. The exposed-pad 240-BFQFP package handles moderate power dissipation while supporting commercial-temperature operation (0°C to +70°C). Engineers use the FLEX 10K's embedded array blocks to implement small dual-port RAMs for waveform lookup tables and pulse-width modulation ramps. The device's JTAG boundary-scan and in-system programmability simplify factory-floor firmware updates via the serial configuration interface. For motor-control, sensor multiplexing, and PLC I/O expansion, the EPF10K50VRC240-1N remains a proven workhorse in legacy equipment.
Empfohlen
PCI Bus Interface Bridging
The EPF10K50VRC240-1N's 189 user I/Os comfortably accommodate 32-bit PCI data, address, and control signals alongside auxiliary glue logic for legacy motherboards and add-in cards. Its 66.67 MHz internal frequency supports 33 MHz PCI bus operation in target or master mode, with the FLEX 10K EABs implementing PCI configuration space registers as on-chip RAM. Designers appreciate the deterministic timing of FLEX 10K interconnect, which simplifies PCI compliance verification. The exposed-pad BFQFP package also provides the thermal headroom needed for continuous bus-mastering workloads in industrial computing platforms.
Empfohlen
DSP Co-Processing Accelerator
The FLEX 10K family's embedded array blocks enable parallel multiplier-accumulator architectures that pair naturally with external DSP processors for FIR filtering, FFT preprocessing, and image-pipeline pre-conditioning. The EPF10K50VRC240-1N's 50,000 gates deliver enough logic for 16-tap FIR filters or 64-point FFT butterflies in a single device, offloading real-time signal-processing work from the host DSP. The 240-pin BFQFP footprint also allows direct connection to dual external SRAM banks for coefficient and sample-data storage. This combination of EAB memory and general logic was unique at the FLEX 10K's 1990s introduction and still serves niche DSP applications today.
Empfohlen
ASIC Prototyping Platform
Before committing to mask sets, ASIC designers historically used FLEX 10K FPGAs like the EPF10K50VRC240-1N to validate RTL designs at near-ASIC speed. The device's 50,000-gate capacity maps cleanly to medium-complexity ASIC prototypes in networking, storage, and embedded-controller markets. The 240-pin BFQFP package exposes enough I/O to emulate most ASIC pad rings, and Quartus II / MAX+PLUS II synthesis produces fast, predictable place-and-route results. Engineers continue to use this part in low-volume NPI programs where the cost of FLEX 10K silicon is justified by avoiding an NRE mask charge.
Empfohlen
Embedded System-on-Chip Integration
The FLEX 10K pioneered System-on-a-Programmable-Chip (SOPC) integration by embedding RAM, ROM, and arithmetic functions alongside the general logic array. The EPF10K50VRC240-1N continues to host embedded microcontrollers, peripherals, and memory subsystems on a single die for aerospace, medical, and industrial systems with long lifecycles. Its commercial-temperature rating (0°C to +70°C) suits many indoor industrial and medical applications, while the exposed-pad BFQFP package simplifies thermal management in sealed enclosures. This single-chip integration reduces BOM count and improves reliability compared with multi-chip discrete-processor designs of equivalent functionality.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EPF10K50VRC240-1N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EPF10K50VRC240-1 | EPF10K50VRC240-2N | EPF10K50VRC240-3N | EPF10K50VRC240-4N | EPF10K50RC240-4 |
|---|---|---|---|---|---|---|
| Package | 240-BFQFP Exposed Pad (RQFP) | 240-BFQFP Exposed Pad (RQFP) - same | 240-BFQFP Exposed Pad (RQFP) - same | 240-BFQFP Exposed Pad (RQFP) - same | 240-BFQFP Exposed Pad (RQFP) - same | 240-BFQFP Exposed Pad (RQFP) - same |
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Speed Grade | -1 (66.67 MHz internal) | -1 (66.67 MHz internal) - identical | -2 (~125 MHz internal) | -3 (mid-tier) | -4 (fastest) | -4 speed grade but 5 V supply |
| Typical Gates | 50,000 | 50,000 | 50,000 | 50,000 | 50,000 | 50,000 |
| Logic Cells / Elements | 2,880 | 2,880 | 2,880 | 2,880 | 2,880 | 2,880 |
| User I/Os | 189 | 189 | 189 | 189 | 189 | 189 |
| Core Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 5.0 V - NOT voltage-compatible |
| RoHS Compliant (lead-free) | Yes ('N' suffix) | No (no 'N' suffix) | Yes | Yes | Yes | Varies by sub-variant |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Wichtigste Unterscheidungsmerkmale
- Drop-in compatibility with all 240-BFQFP FLEX 10K speed grades (vs. EPF10K50VRC240-4N)
- Industry-first embedded array block (EAB) architecture (vs. EPF10K30AQC240-3)
- Commercial-temperature, lead-free (RoHS) variant available (vs. EPF10K50VRC240-1)
Designhinweise
The FLEX 10K family draws substantially more core current than modern Cyclone or Cyclone IV devices because it is built on a 0.42 µm CMOS process at 3.3 V. Estimated: at 66.67 MHz internal operation with 80% logic utilization, expect 200-400 mA of Icc core current. Place at least one 0.1 µF decoupling capacitor within 5 mm of every VCCINT and VCCIO pin pair, plus a single 10 µF bulk tantalum or ceramic capacitor near the exposed thermal pad. Avoid routing high-speed signals across power islands - FLEX 10K is more sensitive to IR drop than modern FPGAs.
The 240-BFQFP package's exposed pad (EP) is the primary thermal path. Solder the EP to a continuous copper pour of at least 1 square inch on the top or bottom PCB layer, with thermal vias (12-16 vias of 0.3 mm drill) stitching the EP pad to inner ground planes. Estimated: with 1 sq inch of 1 oz copper, theta_JA is approximately 25-30 °C/W; without the EP properly soldered, theta_JA exceeds 50 °C/W and the junction may exceed 125 °C at full I/O switching. Industrial-temperature designs may need additional heatsinking or forced airflow.
Route FLEX 10K I/O signals with 50 Ω controlled impedance if any signal exceeds 50 MHz edge rates. Place series termination resistors within 10 mm of the FPGA output pin to dampen reflections on long traces. Keep configuration pins (nCONFIG, nSTATUS, CONF_DONE, MSEL[0..3]) away from switching I/O to avoid coupling noise into the configuration chain. Use a dedicated ground island under the exposed pad and stitch it to the main ground plane with at least four vias placed symmetrically around the EP.
Two common pitfalls when designing with the EPF10K50VRC240-1N: (1) confusing the 'V' (3.3 V core) variant with the non-'V' (5.0 V core) variant - they are NOT pin-compatible from a power-supply perspective even though the package and pinout match; verify the exact part number before PCB bring-up. (2) Using modern Quartus Prime instead of legacy Quartus II or MAX+PLUS II - Quartus Prime does NOT support FLEX 10K synthesis, and attempting to compile will fail with unsupported-device errors. Use the final Quartus II service release (13.1) or MAX+PLUS II 9.23 for bitstream generation.
Differential clock inputs on the FLEX 10K family are sensitive to PCB trace-length mismatch - keep clock-pair traces within 1 mm of each other and within 5 mm total length to preserve duty cycle. If using an external PLL or clock buffer, place it within 25 mm of the dedicated clock input pin (CLK0/CLK1) and route on the same PCB layer to avoid impedance discontinuities via stubs. For JTAG chain integration, add 10 kΩ pull-ups on TCK, TMS, and TDI per IEEE 1149.1 best practice, and place the JTAG connector within 50 mm of the FPGA TAP pins.
Compliance-Informationen
The 'N' suffix in EPF10K50VRC240-1N indicates lead-free / RoHS-compliant finish per Altera/Intel legacy part numbering convention. The part is commercial-temperature (0°C to +70°C) and is not AEC-Q100 qualified - it is not intended for automotive applications. Halogen-free status and conflict-minerals compliance are not documented in available data; verify with Intel's PCN archive if required for environmental compliance audits.
