Texas Instruments

INA125U/2K5 - Low-Power Precision Instrumentation Amplifier with 2.5V Reference

Teilenummer: INA125U/2K5 ✓ Aktiv
2.7 V to 36 V Vdss 10 nA Id 16-pin SOIC, PDSO16 Package
MOQ: 1 |

INA125U/2K5 Übersicht

The Texas Instruments INA125U/2K5 is a low-power, high-accuracy instrumentation amplifier with an integrated precision voltage reference, delivered in a 16-pin SOIC package. It provides complete bridge excitation and precision differential-input amplification on a single integrated circuit, with gain set from 4 V/V to 10,000 V/V by one external resistor. Key headline figures are a 2.7 V to 36 V supply range (±18 V maximum total supply), an input bandwidth of 0.15 MHz, a 100 dB CMRR and 38 nV/√Hz input noise at 1 kHz, all in a 16-lead SOIC.

An instrumentation amplifier is a differential-input amplifier optimized for measuring small signals buried in noise and common-mode interference. The category hierarchy runs instrumentation amplifier -> differential amplifier -> amplifier IC -> integrated circuit -> semiconductor. Unlike a discrete op-amp difference stage, an INA offers high input impedance, matched resistors, excellent common-mode rejection and a single-gain-set resistor, which is why it dominates strain-gauge, bridge and ratiometric sensor front ends.

Key features include a 50 uV maximum input offset voltage, a 2 uV/°C input offset voltage temperature coefficient, a 460 uA typical supply current for low-power designs, a 2 V/µs slew rate, and 60 µs settling time. The internal reference supplies a stable excitation voltage for bridge circuits, and an enable/shutdown pin supports power management. Overvoltage protection guards inputs during industrial transients.

Technically, the device uses a three-op-amp topology with laser-trimmed internal feedback resistors, so gain accuracy depends only on the external gain resistor. The on-board precision reference makes ratiometric conversion with an ADC possible without a second supply, and the reference can also serve as an external excitation source. The single external gain resistor keeps the calibration chain short, which supports the 0.075% gain error class of the device.

Typical applications include strain-gauge and load-cell front ends, isolated transmitter analog sections, bridge-powered sensor modules, medical monitoring instrumentation, and 4-20 mA loop signal conditioning where the reference eliminates a separate excitation supply.

When designing around the INA125U/2K5, keep the gain resistor close to the RG pin and use the recommended supply bypassing. Because it is a linear amplifier with a wide supply range, excessive headroom at high gain costs power and heat; choose the smallest gain that meets the sensitivity target.

This page consolidates distributor availability, drop-in same-family alternatives, parameter-by-parameter comparison, and practical layout notes that are not collected in a single place in the manufacturer datasheet.

Drop-in-Alternativen für INA125U/2K5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit INA125U/2K5 (gleiche Bauform und Footprint) – abweichend in Package, Gain Range, Common-Mode Rejection Ratio, Number of Channels, Quiescent Current.

Texas Instruments
Package: 16-pin SOIC
Gain Range: 4 V/V to 10,000 V/V
Quiescent Current: 460 µA
Texas Instruments
Package: 16-pin SOIC
Gain Range: 4 V/V to 10,000 V/V
Number of Channels: 1 circuit
Texas Instruments
Package: 8-pin SOIC
Common-Mode Rejection Ratio: 74 dB minimum
Number of Channels: 1 channel

INA125UA/2K5

✅ Drop-In
📦 16-pin SOIC (PDSO16)
same 16-pin SOIC footprint and pin functions, tighter offset and gain accuracy grade than the standard INA125U grade; gain range and supply range unchanged

📋 Referenzalternative (nicht im Katalog)

INA125UA

✅ Drop-In
Texas Instruments
📦 16-pin SOIC (PDSO16)
Instrumentation amplifier with precision voltage reference · 1 circuit · 4 V/V to 10,000 V/V · 1 external resistor · 2.7 V to 36 V · 250 uV · Differential input · Integrated precision voltage reference

Preis auf Anfrage

Datenblatt ansehen →

INA125U

✅ Drop-In
Texas Instruments
📦 16-pin SOIC (PDSO16)
Instrumentation amplifier with precision voltage reference · 1 circuit · 2.7 V to 36 V · 36 V · 4 V/V to 10,000 V/V · Single external resistor · 460 µA · 250 µV maximum

Preis auf Anfrage

Datenblatt ansehen →

INA125U/2K5 Grenzwerte & elektrische Eigenschaften

Device Type Instrumentation amplifier with precision voltage reference
Supply Voltage Range 2.7 V to 36 V
Maximum Total Supply Voltage -18 V to +18 V (±18 V)
Gain Range 4 V/V to 10,000 V/V, set by one external resistor
Gain Error (max) 0.075%
Input Offset Voltage (max) 50 uV
Input Offset Voltage Temperature Coefficient 2 uV/°C
Input Bias Current 10 nA
Common-Mode Rejection Ratio 100 dB
Input Voltage Noise Density 38 nV/√Hz at 1 kHz
Gain-Bandwidth Product 0.15 MHz
Slew Rate 2 V/µs
Settling Time 60 µs
Typical Supply Current 460 uA
Internal Reference Output 2.5 V precision voltage reference
Betriebstemperaturbereich -40 °C to +85 °C
Gehäuse 16-pin SOIC, PDSO16
Montageart Surface mount
Enable / Shutdown Control Yes, enable/shutdown pin
Input Overvoltage Protection Yes
RoHS-Status Compliant

INA125U/2K5 16-pin soic, pdso16 Pinbelegungsleitfaden

Pinbelegung für INA125U/2K5 (16-pin soic, pdso16-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für INA125U/2K5 im 16-pin soic, pdso16-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für INA125U/2K5.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

INA125U/2K5 ist geeignet für 6 Anwendungs: Strain-Gauge and Load-Cell Front End, Ratiometric ADC Signal Conditioning, Industrial Transmitter Signal Conditioning, Medical and Biosignal Monitoring, Precision Bridge Excitation for Test and Measurement, Low-Power Sensor Node and IoT Edge.

⚡

Strain-Gauge and Load-Cell Front End

The INA125U/2K5 suits strain-gauge and load-cell bridges because it combines a 2.5 V precision reference output with a differential gain stage of 4 V/V to 10,000 V/V set by one resistor. With 100 dB CMRR, 38 nV/√Hz input noise at 1 kHz and 50 uV maximum input offset, the amplified millivolt-level bridge output can be sampled directly by a SAR ADC. Placing the gain resistor close to the RG pin and keeping the bridge wiring away from switching nodes preserves the ratiometric cancellation that makes the reference valuable. The 460 uA supply current keeps battery and portable load-cell modules compact without heatsinking.

📊

Ratiometric ADC Signal Conditioning

In ratiometric conversion the ADC reference and the sensor excitation share the same source, so supply drift cancels in the digital result. The INA125U/2K5 supports this directly: its on-board 2.5 V precision reference can drive both the bridge and the ADC reference input, eliminating a separate excitation supply. Gain accuracy of 0.075% then comes almost entirely from the external gain resistor, so a 0.05% resistor is usually sufficient. This makes the device a good fit for weighing, pressure and level systems where absolute calibration stability matters more than wide bandwidth.

🏭

Industrial Transmitter Signal Conditioning

Field transmitters often need to survive industrial transients while delivering accurate measurement to a remote 4-20 mA loop. The INA125U/2K5 provides the differential accuracy, high input impedance and 100 dB CMRR needed to reject ground-potential differences between sensor and transmitter ground. Its input overvoltage protection helps in installations where cabling is long, and the enable/shutdown pin allows the analog section to be powered down during maintenance windows. Operating from 2.7 V to 36 V permits single 5 V or 24 V loop-powered rails.

💊

Medical and Biosignal Monitoring

Low-noise differential acquisition is central to patient monitoring, where small bioelectric signals sit on large electrode offsets. The INA125U/2K5 offers 38 nV/√Hz input noise at 1 kHz, a 2 uV/°C offset drift coefficient and 100 dB CMRR in a 16-pin SOIC package, enough to build compact single-channel front ends without a separate instrumentation amplifier stage. The integrated 2.5 V reference supports self-calibrated excitation for resistive sensors, while the 0.15 MHz bandwidth suits ECG-style and pressure-style signals rather than high-speed imaging chains.

🔧

Precision Bridge Excitation for Test and Measurement

Instrumentation setups often need a quiet, well-defined excitation source plus a differential receiver in one device. The INA125U/2K5 provides both, so a bench module can supply bridge excitation from the internal 2.5 V reference and measure the resulting differential output with 4 V/V to 10,000 V/V gain. The 60 µs settling time and 2 V/µs slew rate suit slow precision measurements and pulsed test sequences, while the -40 °C to +85 °C range supports laboratory and industrial chassis environments. The wide 2.7 V to 36 V supply span allows use from battery-powered fixtures to 24 V racks.

🧩

Low-Power Sensor Node and IoT Edge

Battery-powered sensor nodes must hold quiescent current low without giving up differential accuracy, and the INA125U/2K5 draws about 460 uA typical supply current while keeping offset at 50 uV maximum. In a self-powered bridge node, the internal 2.5 V reference excites the sensor and the amplifier conditions the output for a low-power ADC, and the enable/shutdown pin lets the analog section sleep between samples. The 16-pin SOIC package keeps board area small for compact IoT enclosures, and 2.7 V minimum supply supports coin-cell and energy-harvesting rails.

What is the INA125U/2K5 instrumentation amplifier used for?
The INA125U/2K5 is a low-power, high-accuracy instrumentation amplifier with an integrated precision voltage reference used for bridge excitation and precision differential-input amplification on a single chip. According to the Texas Instruments INA125 datasheet, it provides complete bridge excitation plus differential gain in one 16-pin SOIC device, with a single external resistor setting any gain from 4 V/V to 10,000 V/V. It is typically used in strain-gauge, load-cell and ratiometric sensor front ends where a stable excitation voltage and high common-mode rejection are both required.
How is the gain of the INA125U/2K5 set?
Gain is set by a single external resistor connected to the RG pin, giving a usable range of 4 V/V to 10,000 V/V. Per the Texas Instruments INA125 datasheet, because the internal feedback resistors are laser trimmed, total gain accuracy depends mainly on the tolerance and temperature coefficient of that one gain resistor. The device also offers an internal precision reference output, so a bridge can be excited and ratiometrically converted without an additional excitation supply.
What are the key specifications of INA125U/2K5 that engineers should know?
The INA125U/2K5 runs from 2.7 V to 36 V (±18 V maximum), delivers 4 V/V to 10,000 V/V gain, 0.075% gain error, 50 uV maximum input offset voltage, a 2 uV/°C offset drift, 100 dB CMRR and 38 nV/√Hz input noise at 1 kHz. The Texas Instruments INA125 datasheet lists a 0.15 MHz bandwidth, 2 V/µs slew rate, 60 µs settling time and about 460 uA typical supply current, all in a 16-pin SOIC package rated from -40 °C to +85 °C.
What is the difference between INA125U and INA125UA?
INA125U and INA125UA use the same package and pin configuration, and differ mainly in electrical performance grade rather than in function. Texas Instruments lists INA125UA as a higher-precision version of the INA125 family with slightly tighter offset and gain specifications, while INA125U is the standard grade. The /2K5 suffix denotes the 2.5 V reference variant supplied in tape-and-reel packaging, so INA125U/2K5 is the reel-packaged form of the standard-grade device.
Is the INA125U/2K5 suitable for bridge and strain-gauge measurement?
Yes, the INA125U/2K5 is specifically designed for bridge excitation and precision differential measurement. The Texas Instruments INA125 datasheet describes it as providing complete bridge excitation and precision differential-input amplification on a single integrated circuit, with 100 dB CMRR and 38 nV/√Hz input noise at 1 kHz. A 2.5 V precision reference output can drive the bridge directly, enabling ratiometric operation with an ADC and cancelling gain drift from the excitation supply.
Where can I download the INA125U/2K5 datasheet PDF?
The official INA125U/2K5 datasheet PDF is available from the Texas Instruments product page for the INA125 family at https://www.ti.com/lit/gpn/INA125, with the device landing page at https://www.ti.com/product/INA125. The same document also contains the pin configuration, electrical characteristics tables and the ordering information table that identifies the INA125U/2K5 orderable part number and its 16-pin SOIC package option.
Where can I find the INA125U/2K5 pinout and package drawing?
The pin configuration and package dimensions are in the pin-configuration section of the Texas Instruments INA125 datasheet, and the mechanical drawing for the 16-pin SOIC (PDSO16) option appears in the package information section of the same document. Because the INA125 family shares one internal pin arrangement across its package options, use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and confirm the exposed-pad or thermal-pad requirements in the mechanical drawing for your assembly house.
What are the benefits of the INA125 over a discrete op-amp difference amplifier?
The INA125 integrates a complete three-op-amp instrumentation-amplifier topology with laser-trimmed internal resistors, so a discrete difference stage cannot match its resistor matching or common-mode rejection without careful selection. The Texas Instruments INA125 datasheet specifies 100 dB CMRR, 38 nV/√Hz input noise at 1 kHz and a 50 uV maximum input offset voltage in one 16-pin SOIC. You also get a 2.5 V precision reference and enable/shutdown control on the same die, reducing external parts count.
What can replace the INA125U/2K5?
The closest drop-in replacements are the same-family Texas Instruments INA125U/2K5 variants: INA125UA/2K5 and INA125UA, which share the same 16-pin SOIC footprint and pin functions but offer a tighter accuracy grade, and INA125U, the non-reel-packaged standard grade with identical electrical performance. For a different manufacturer, no pin-compatible INA125 equivalent with the integrated 2.5 V reference was identified, because the reference and enable/shutdown pins make the INA125 pinout specific. Verify the pin-description table in the manufacturer datasheet before any substitution.
What is the best equivalent for INA125U/2K5 from another manufacturer?
Cross-brand parts that combine a three-op-amp instrumentation amplifier with an on-chip 2.5 V precision reference in a 16-pin SOIC are rare, and most catalog alternatives either omit the reference output or use a different 16-pin pinout. Texas Instruments INA125UA/2K5 and INA125UA remain the practical path because they keep the reference and enable pins in the same positions. If a cross-brand route is mandatory, confirm pin compatibility against the manufacturer datasheet pin-description table rather than relying on package matching alone.
INA125U/2K5 vs INA125UA/2K5 - which is better for a precision bridge front end?
Choose INA125UA/2K5 for the highest precision, and INA125U/2K5 when standard-grade accuracy is sufficient. Both are 16-pin SOIC devices with the same pin functions, the same 2.7 V to 36 V supply range, the same 4 V/V to 10,000 V/V gain range and the same integrated 2.5 V reference, so they are pin-for-pin compatible. According to Texas Instruments, the UA grade carries tighter offset and gain limits, while the U grade is the standard accuracy version for cost-sensitive designs.
When should I choose INA125U/2K5 over an INA326 or INA333?
Choose the INA125U/2K5 when you need a low-noise, low-power amplifier with an integrated precision 2.5 V reference and only modest bandwidth (0.15 MHz). The INA326 and INA333 are newer digital-programmable or higher-bandwidth families with different pinouts and different power envelopes, so they are not drop-in substitutes for an existing INA125 board. The INA125 is still the right pick for slow bridge signals sampled by a SAR ADC, where 38 nV/√Hz noise and 460 uA supply current matter more than bandwidth.
Is the INA125U/2K5 in stock and what is the lead time?
Stock levels and lead time for the INA125U/2K5 change with demand, so the fastest answer is the Request a Quote form on this page, which returns current availability and delivery timing for the exact orderable MPN and package. The Texas Instruments product page lists the INA125U/2K5 as an active orderable part in the 16-pin SOIC configuration, and multiple authorized distributors carry the standard-grade family, which generally means the part is obtainable rather than end-of-life.
How much does the INA125U/2K5 cost and where can I buy it?
Pricing for the INA125U/2K5 moves with volume, market conditions and stocking levels, so current pricing is not stated in static text here. Use the Request a Quote form on this page to obtain a unit price and volume tiers for the exact MPN, including the 16-pin SOIC tape-and-reel configuration, and to check lead time. The manufacturer product page for the INA125 family lists the INA125U/2K5 as active, and the same part is stocked by several authorized distributors.
How much power does the INA125U/2K5 consume?
The INA125U/2K5 draws about 460 uA typical supply current, according to the Texas Instruments INA125 datasheet, which is why it is specified as a low-power device. With a 5 V supply at 460 uA the dissipation is roughly 2.3 mW, so no heatsinking is needed. Because it is a linear amplifier, however, power and heat still scale with supply voltage and output current, which matters most at high gain where output swing into a low-impedance load is significant.
Is the INA125U/2K5 RoHS compliant and automotive qualified?
The INA125U/2K5 is listed as RoHS compliant in the Texas Instruments product data, and it is a standard industrial/commercial grade part rated from -40 °C to +85 °C rather than an AEC-Q100 qualified automotive device. The standard INA125 family does not include a -Q1 automotive-qualified option in this orderable line, so for vehicle applications use an automotive-rated instrumentation amplifier and treat the INA125U/2K5 as an industrial part. Confirm the current compliance declarations on the manufacturer product page before release.

Technische Referenzdaten für INA125U/2K5 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the INA125U/2K5 when your design needs a differential amplifier with a built-in 2.5 V excitation reference, low input noise of 38 nV/√Hz at 1 kHz, 100 dB CMRR and modest bandwidth of 0.15 MHz - typical for strain gauges, load cells and ratiometric ADC inputs running from a 2.7 V to 36 V rail. Pick INA125UA/2K5 or INA125UA when offset and gain accuracy dominate the error budget and a tighter tolerance grade is worth the cost; both are pin-for-pin identical in the 16-pin SOIC. Use INA125U when you want the standard grade without the reel-packaged 2K5 ordering code. Choose a newer instrumentation-amplifier family such as the INA326 or INA333 only when you need programmable gain or wider bandwidth, since those devices have different pinouts and higher power consumption. No other manufacturer's part was confirmed as a pin-compatible substitute that also carries an integrated 2.5 V reference, so validate any cross-brand option against the manufacturer pin-description table before committing.

Vergleich mit Alternativen

Parameter Dieses Produkt INA125UA/2K5 INA125UA INA125U
Package 16-pin SOIC (PDSO16) 16-pin SOIC (PDSO16) - same 16-pin SOIC (PDSO16) - same 16-pin SOIC (PDSO16) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type Instrumentation amplifier with precision voltage reference Instrumentation amplifier with precision voltage reference Instrumentation amplifier with precision voltage reference Instrumentation amplifier with precision voltage reference
Supply Voltage Range 2.7 V to 36 V 2.7 V to 36 V 2.7 V to 36 V 2.7 V to 36 V
Gain Range 4 V/V to 10,000 V/V (external resistor) 4 V/V to 10,000 V/V (external resistor) 4 V/V to 10,000 V/V (external resistor) 4 V/V to 10,000 V/V (external resistor)
Accuracy Grade Standard grade (gain error 0.075% max) Higher-precision UA grade, tighter offset and gain limits Higher-precision UA grade, tighter offset and gain limits Standard grade
Common-Mode Rejection Ratio 100 dB 100 dB 100 dB 100 dB
Input Noise Density 38 nV/√Hz at 1 kHz 38 nV/√Hz at 1 kHz 38 nV/√Hz at 1 kHz 38 nV/√Hz at 1 kHz
Bandwidth 0.15 MHz 0.15 MHz 0.15 MHz 0.15 MHz
Supply Current (typical) 460 uA 460 uA 460 uA 460 uA
Internal Reference Output 2.5 V precision voltage reference 2.5 V precision voltage reference 2.5 V precision voltage reference 2.5 V precision voltage reference

Wichtigste Unterscheidungsmerkmale

  • Integrated precision 2.5 V reference with the amplifier on one die (vs. INA125UA)
  • Single-resistor gain setting across a 4 to 10,000 V/V range (vs. INA125U)
  • Higher-precision grade available without any footprint or pin change (vs. INA125UA/2K5)

Designhinweise

Place the external gain resistor directly at the RG pin with a short, low-inductance trace, because stray capacitance in combination with the internal gain network degrades bandwidth and can cause peaking around the 0.15 MHz corner. Route the two differential inputs as a matched pair on a quiet layer, keep them away from the reference output and supply traces, and connect the reference output only to the bridge or ADC reference input. Use the manufacturer recommended bypass capacitor close to the supply pins.

A frequent field issue is assuming the gain is set by two resistors or by a digital control, when the INA125U/2K5 uses a single external resistor and the UA and U grades differ only in accuracy limits. Another trap is leaving the enable/shutdown pin floating, which can leave the amplifier in an indeterminate state; tie it to the supply or drive it from the host. Finally, the 2.5 V reference output cannot source large currents, so do not use it to power unrelated circuitry.

For bridge work, keep sensor wiring short and shield it, and ground the shield at the amplifier end only to avoid a ground loop that degrades the 100 dB CMRR figure. If the source impedance is high, add matched input bias compensation resistors as described in the manufacturer datasheet to preserve common-mode rejection balance. Because the offset drift is 2 uV/°C, specify resistors with low temperature coefficient for the gain network when working across wide ambient ranges.

Estimated: with a 5 V supply and 460 uA typical supply current, device dissipation is about 2.3 mW, so no thermal derating is required at low supply voltages. At a 24 V supply the same current gives roughly 11 mW, still negligible. The real thermal constraint is the linear output stage driving a low-impedance load at high gain, so budget output current separately from the 460 uA quiescent figure and keep the load impedance high enough that the output does not saturate.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance is listed for the INA125U/2K5 on the Texas Instruments product page. The part is an industrial/commercial grade device rated -40 °C to +85 °C, with no AEC-Q100 automotive-qualified option in this orderable line.

Daten verifiziert am: 2026-11-14 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ina125u datasheet INA125U/2K5 datasheet pdf INA125U/2K5 pinout INA125U/2K5 SOIC-16 instrumentation amplifier INA125U/2K5 precision voltage reference 2.5V INA125U/2K5 bridge excitation amplifier INA125U/2K5 vs INA125UA/2K5 INA125U/2K5 drop-in replacement INA125U/2K5 equivalent amplifier Texas Instruments INA125U/2K5 INA125U/2K5 price and stock INA125U/2K5 strain gauge load cell front end INA125U/2K5 gain resistor 4 to 10000 INA125U/2K5 reference output ratiometric ADC

Verwandte Bauteile & Begriffe

Texas Instruments INA125U/2K5 INA125UA/2K5 INA125UA INA125U instrumentation amplifier differential amplifier amplifier IC integrated circuit semiconductor precision voltage reference bridge excitation ratiometric conversion CMRR gain bandwidth product input offset voltage SOIC-16 PDSO16 surface mount RoHS strain gauge load cell 4-20 mA loop transmitter ADC
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen