Texas Instruments

INA2134PAG4 - Unity-Gain Audio Receiver | Texas Instruments

Teilenummer: INA2134PAG4 ✓ Aktiv
1 V/V Vdss 14-pin PDIP Package 3.10 MHz Speed
MOQ: 1 |

INA2134PAG4 Übersicht

The Texas Instruments INA2134PAG4 is a unity-gain audio differential line receiver rated for a ±18 V dual supply, with one receiver channel per integrated operational amplifier, 0.0005% distortion at 1 kHz, a 14 V/µs slew rate, and a 14-pin PDIP package. It is designed for high-performance audio systems requiring balanced input handling and accurate differential-to-single-ended conversion.

An audio differential line receiver is a special-purpose amplifier that accepts a balanced audio signal and converts it into an unbalanced output referenced to ground. In the signal-chain hierarchy, the INA2134 belongs to the amplifier IC category, specifically the differential receiver and audio line-receiver class. Its internal precision resistors establish the differential gain, while the high-performance operational-amplifier cores provide the signal amplification and output drive.

The manufacturer identifies low distortion of 0.0005% at 1 kHz as a principal performance feature. A 14 V/µs slew rate supports rapid signal transitions, while the wide output-voltage swing and high output-drive capability make the device suitable for professional audio, instrumentation, and balanced-input equipment. The unity gain of 1 V/V avoids adding signal gain that could complicate system-level headroom planning.

The architecture combines precision on-chip resistors with operational amplifiers designed for low-distortion audio operation. This integrated approach reduces the number of external gain-setting components required for a balanced receiver stage. The INA2134PAG4 is a through-hole PDIP-14 device, making it appropriate for through-hole audio boards, prototypes, legacy equipment, and designs where a socketed package simplifies maintenance or replacement.

Typical uses include balanced professional-audio inputs, line-level receiver stages, audio measurement equipment, mixer-interface boards, and stereo differential-to-single-ended conversion. The receiver can sit between a balanced connector and downstream audio circuitry while rejecting common-mode interference encountered along longer cable runs. Its low distortion and fast slew rate preserve signal fidelity in these signal-chain applications.

Power-supply layout and signal grounding are critical for this line receiver. Use clean dual supplies, connect the device ground to the audio-signal reference, and route the differential pair away from switching nodes and high-current return paths. Confirm that input and output swing remain within the device limits throughout the signal amplitude and frequency range of the design.

This page combines manufacturer specifications, practical application guidance, package information, and verified cross-reference context to support component selection. It also identifies direct replacement constraints so engineers can distinguish a genuine PDIP-14 drop-in option from devices that merely perform a similar receiver function in another footprint.

Drop-in-Alternativen für INA2134PAG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit INA2134PAG4 (gleiche Bauform und Footprint) – abweichend in Voltage Gain.

Texas Instruments
Voltage Gain: 1 V/V (0 dB)
Vergleichen mit INA2134PAG4 →

INA2134PA

✅ Drop-In
Texas Instruments
📦 14-pin PDIP
2 channels · 1 V/V (0 dB) · Dual audio differential line receiver · -18 V to +18 V · 2.9 mA maximum · 90 dB minimum · 0.0005% at 1 kHz · 14 V/µs

Preis auf Anfrage

Datenblatt ansehen →

INA2134PAG3

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 14-pin PDIP
Same INA2134 family and 14-pin PDIP footprint; G3 temperature grade differs from G4, requiring qualification against the original grade

📋 Referenzalternative (nicht im Katalog)

INA2134PAG4 Grenzwerte & elektrische Eigenschaften

Product Type Audio differential line receiver
Receiver Configuration 2 channels
Voltage Gain 1 V/V
Versorgungsspannung ±18 V
Minimum Supply Voltage 4 V
Maximum Supply Voltage 36 V
Distortion 0.0005% at 1 kHz
Slew Rate 14 V/µs
Common-Mode Rejection 74 dB minimum
Noise Floor -100 dBu with 20 kHz bandwidth
Frequency 3.10 MHz
Gehäuse 14-pin PDIP
Montageart Through-hole
Temperature Grade Industrial
Number of Terminals 14

INA2134PAG4 14-pin pdip Pinbelegungsleitfaden

Pinbelegung für INA2134PAG4 (14-pin pdip-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für INA2134PAG4 im 14-pin pdip-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für INA2134PAG4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

INA2134PAG4 ist geeignet für 6 Anwendungs: Balanced Professional Audio Input, Stereo Differential-to-Single-Ended Conversion, Audio Measurement Front End, Broadcast and Studio Line Interface, Legacy Audio Equipment Upgrade, Instrument Preamp and Balanced Source Interface.

🎧

Balanced Professional Audio Input

The INA2134PAG4 fits the first analog stage of a balanced professional-audio input because it converts a differential line signal into a single-ended output at 1 V/V gain. Its 0.0005% distortion at 1 kHz preserves low-level signal detail, while the 14 V/µs slew rate provides ample response for transient-heavy music and sound effects. The receiver’s common-mode rejection of at least 74 dB helps reduce hum and interference carried equally on both cable conductors. Place the device close to the input connector, maintain a continuous audio-ground return, and avoid routing the balanced pair beside power-converter nodes.

🎚️

Stereo Differential-to-Single-Ended Conversion

The INA2134PAG4 is appropriate for stereo equipment that receives balanced left and right channels but drives conventional unbalanced circuitry. Its two receiver channels support symmetrical signal treatment, and the unity gain avoids amplifying the signal before the system’s volume-control or mixer stage. The 14-pin PDIP format is useful for through-hole mixer-interface boards, where replaceable sockets can simplify service. Because each channel must preserve channel separation, use matched routing and grounding, keep both input pairs away from switching supplies, and verify output swing at the highest expected program level.

🖥️

Audio Measurement Front End

The INA2134PAG4 can serve as the balanced input receiver in audio measurement and test equipment where the source uses a differential line interface. Its low 0.0005% distortion at 1 kHz helps preserve measurement integrity, while unity gain provides a controlled interface level to downstream converters. The 74 dB minimum common-mode rejection reduces the influence of common-mode noise on sensitive measurements. Use short, shielded differential connections, provide low-noise dual supplies, and keep the receiver’s ground tied to the instrument signal reference rather than allowing separate ground currents to share the same path.

📻

Broadcast and Studio Line Interface

The INA2134PAG4 is suitable for broadcast, studio, and live-sound line interfaces that need accurate balanced-input conversion without an external gain network. Its fast 14 V/µs slew rate supports transient reproduction, while the wide output swing and high output-drive capability help maintain signal integrity into the next analog stage. The receiver’s precision on-chip resistors make the gain repeatable across production units. For rack and studio equipment, use an isolated or properly referenced supply arrangement, provide local input bypassing, and validate grounding to prevent earth-loop noise from entering the audio path.

🔧

Legacy Audio Equipment Upgrade

The INA2134PAG4 is a practical upgrade option for legacy professional-audio equipment that uses a 14-pin PDIP balanced-input stage and requires modern low-distortion performance. Its through-hole package can fit existing through-hole layouts without a fine-pitch SMD rework process, provided the original pin functions match. The unity-gain architecture is useful when replacing discrete balanced receiver stages that previously required several precision resistors and additional gain planning. Before installation, compare the original device’s supply voltage, common-mode range, output swing, and grounding arrangement. Socket the device where maintenance access and replacement speed are priorities.

🎛️

Instrument Preamp and Balanced Source Interface

The INA2134PAG4 can form the balanced source interface of an instrument preamplifier when the source supplies a differential line-level signal. Unity gain preserves the source level for later gain control, and the low distortion supports clean reproduction of musical dynamics. Its common-mode rejection is valuable when the instrument cable is longer than a short bench connection and the input may pickup environmental interference. Keep the input impedance arrangement consistent with the source specification, observe common-mode and output limits, and avoid introducing a second unity-gain stage unless headroom analysis clearly requires it.

What is the INA2134PAG4?
The INA2134PAG4 is a Texas Instruments dual audio differential line receiver with a gain of 1 V/V in a 14-pin PDIP package. According to the manufacturer datasheet, it uses high-performance operational amplifiers and precision on-chip resistors, making it suitable for converting balanced audio signals into single-ended outputs. Its stated distortion is 0.0005% at 1 kHz.
What is the supply voltage range of INA2134PAG4?
The INA2134PAG4 operates from a 4 V minimum total supply to a 36 V maximum total supply, corresponding to a nominal ±18 V dual-supply operating condition. The manufacturer lists the INA2134 family for dual-supply audio operation. Confirm the actual positive and negative rail voltages against the device electrical characteristics before connecting external equipment.
What are the key specifications of INA2134PAG4 that engineers should know?
The principal INA2134PAG4 specifications are unity gain, 0.0005% distortion at 1 kHz, a 14 V/µs slew rate, 74 dB minimum common-mode rejection, and operation up to ±18 V. The manufacturer describes it as a two-channel differential line receiver with integrated precision resistors and high output drive. It is packaged in a 14-pin PDIP for through-hole boards and socketed assemblies.
Where can I download the INA2134PAG4 datasheet PDF?
The official INA2134PAG4 datasheet PDF is available from the Texas Instruments document link on this page. The manufacturer document identifies the INA134 and INA2134 as differential line receivers built from high-performance operational amplifiers with on-chip precision resistors. Use the pin-description table, electrical characteristics, and typical application diagrams in that document when assigning PCB connections.
Where can I find the INA2134PAG4 pinout?
The INA2134PAG4 pinout is defined in the pin-configuration section of the Texas Instruments INA2134 datasheet. The device uses a 14-pin PDIP outline, with pin 1 identified by the package notch. Use the manufacturer drawing when assigning input, output, supply, and ground connections, because a complete pin-level description is not published on the distributor listing pages.
What can replace the INA2134PAG4?
The INA2134PA is the closest identified same-package replacement because it is also a Texas Instruments INA2134 differential receiver in a 14-pin PDIP package. A complete drop-in shortlist could not be established from the available cross-reference records. Confirm temperature grade, supply limits, channel configuration, pin functions, and output drive before approving any replacement for production.
Is INA2134PA a drop-in replacement for INA2134PAG4?
The INA2134PA uses the same 14-pin PDIP package and belongs to the same INA2134 family, making it the leading package-compatible replacement candidate identified for the INA2134PAG4. Its exact ordering suffix and temperature grade must still be checked against the original assembly requirements. Confirm the manufacturer pin functions and electrical limits for the specific INA2134PA suffix before substitution.
What is the best cross-brand equivalent for INA2134PAG4?
No cross-brand equivalent could be confirmed as a true drop-in replacement from the available records. A suitable substitute must use the same 14-pin PDIP footprint, preserve the dual audio receiver configuration and 1 V/V gain, and provide compatible supply, common-mode rejection, distortion, slew-rate, and output-drive characteristics. Use the manufacturer cross-reference search to validate any new candidate before PCB release.
When should I choose INA2134PAG4 over another audio receiver?
Choose the INA2134PAG4 when a through-hole audio design requires a unity-gain differential receiver with low distortion and fast slew performance. Its 0.0005% distortion at 1 kHz and 14 V/µs slew rate make it appropriate for balanced professional-audio and instrumentation paths. Select a different package when surface-mount assembly, a different gain, or a different channel count is required.
Is INA2134PAG4 suitable for balanced audio inputs?
Yes, the INA2134PAG4 is designed for balanced differential audio inputs and differential-to-single-ended conversion. Its integrated precision resistors establish unity gain, while its 74 dB minimum common-mode rejection helps reject noise common to both input conductors. The 14 V/µs slew rate also supports fast signal transitions without relying on an external discrete gain network.
How is the INA2134PAG4 versus INA134 family comparison?
The INA2134 is a two-channel, unity-gain audio differential receiver in the 14-pin PDIP family, while the related INA134 is a different INA-series receiver configuration. The available INA134 cross-reference record does not identify a pin-to-pin part number clearly enough to approve as a replacement. Do not substitute an INA134 solely because both devices are differential receivers; verify the package, channel count, and pin map.
Where can I buy INA2134PAG4 online?
Use the Request a Quote form on this page to request the current INA2134PAG4 price, stock position, minimum order quantity, and delivery schedule. The form allows the request to be matched to the exact 14-pin PDIP ordering code without relying on a stale catalog figure. Confirm the package marking and manufacturer date-code requirements before authorizing procurement.
What is the price of INA2134PAG4?
The current INA2134PAG4 price is not stated because it changes with quantity, inventory, and sourcing conditions. Submit the part number through the Request a Quote form on this page for a response based on the exact MPN and requested quantity. The inquiry should include the required package, temperature grade, and any traceable-manufacturing constraints for the receiving system.
What is the lead time for INA2134PAG4?
The current lead time for the INA2134PAG4 should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, package stock, and allocation status, so a build schedule should be based on a current quotation. Include the required delivery date and any approved-source or traceability requirements in the request.
Is INA2134PAG4 in stock?
Current INA2134PAG4 inventory status should be checked through the Request a Quote form on this page. Because stock and production allocation can change quickly, only a quotation tied to the exact 14-pin PDIP part number should drive purchasing decisions. State the required quantity and target delivery date, and confirm whether factory-sealed packaging or additional traceability is necessary.

Technische Referenzdaten für INA2134PAG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the INA2134PAG4 for a through-hole balanced-audio receiver design that requires unity gain, 0.0005% distortion at 1 kHz, a 14 V/µs slew rate, and operation with a nominal ±18 V dual supply. Its 14-pin PDIP package is particularly useful for legacy boards, prototypes, socketed assemblies, and serviceable equipment. Select the INA2134PA when its ordering suffix and environmental qualification satisfy the assembly, but verify the pin map and temperature requirements before substitution. Consider INA2134PAG3 only when its grade is appropriate for the operating environment. The INA134 should not be selected as a direct substitute without a confirmed pin-level comparison because it is a different INA-series configuration. For new compact surface-mount products, choose a manufacturer pin-compatible INA2134 package rather than attempting to adapt this through-hole device.

Vergleich mit Alternativen

Parameter Dieses Produkt INA2134PA INA2134PAG3
Package 14-pin PDIP 14-pin PDIP - same 14-pin PDIP - same
Brand Texas Instruments Texas Instruments Texas Instruments
Product Type Audio differential line receiver Audio differential line receiver Audio differential line receiver
Voltage Gain 1 V/V 1 V/V 1 V/V
Supply Voltage ±18 V ±18 V ±18 V
Distortion 0.0005% at 1 kHz 0.0005% at 1 kHz 0.0005% at 1 kHz
Slew Rate 14 V/µs 14 V/µs 14 V/µs
Common-Mode Rejection 74 dB minimum 74 dB minimum 74 dB minimum
Channel Count 2 channels 2 channels 2 channels
Mounting Type Through-hole Through-hole Through-hole

Wichtigste Unterscheidungsmerkmale

  • Uses the same 14-pin PDIP interface as the principal package-compatible replacement candidate (vs. INA2134PA)
  • Provides a two-channel unity-gain receiver rather than a single-ended amplifier interface (vs. AD8018ARZ)
  • Combines 0.0005% distortion with a 14 V/µs slew rate in a through-hole audio package (vs. INA2134PAG3)

Designhinweise

Route the differential input pair as a tightly coupled pair and connect it directly to the INA2134PAG4 input pins. Keep the pair away from switching-regulator power traces, relay contacts, and high-current motor returns. Place input-referenced bypass components at the supply pins rather than at a remote power entry point. This arrangement limits common-mode pickup and preserves the benefit of the receiver’s 74 dB minimum common-mode rejection.

Do not treat any INA-series differential receiver as interchangeable solely because it is called a line receiver. Verify the 14-pin PDIP footprint, two-channel architecture, unity gain, supply polarity, common-mode range, and output swing against the manufacturer pin and electrical tables. The INA134 has a different family configuration, so an INA134 candidate should not be fitted to this board without a confirmed pin-for-pin comparison.

For balanced cables, maintain a continuous ground reference and terminate according to the source and system architecture rather than adding an improvised jumper between grounds. Keep the receiver close to the connector to limit antenna pickup, use shielded cable where required, and test both channels for hum and channel-to-channel leakage. The fast 14 V/µs slew rate supports signal dynamics, but it cannot compensate for unstable reference grounding or an overdriven input.

Provide the dual supply required by the application and decouple each rail close to the device pins. The manufacturer identifies operation up to ±18 V, but system transients, startup states, and unregulated rails can exceed nominal limits. Confirm minimum operating voltage, absolute maximum conditions, power-up sequencing, and output behavior during rail startup before connecting the receiver to external equipment.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No target-specific compliance declarations were identified for INA2134PAG4. RoHS was mentioned for the related INA2134UA in a comparison record, but that statement was not transferred to this ordering code.

Ähnliche Suchanfragen

INA2134PAG4 datasheet INA2134PAG4 datasheet pdf INA2134PAG4 pinout INA2134PAG4 replacement INA2134PAG4 equivalent INA2134PAG4 cross reference INA2134PAG4 price INA2134PAG4 stock Texas Instruments INA2134PAG4 INA2134PAG4 14-pin PDIP INA2134PAG4 audio receiver INA2134PAG4 vs INA2134PA

Verwandte Bauteile & Begriffe

Texas Instruments INA2134PAG4 INA2134PA INA2134PAG3 INA2134 INA134 audio differential line receiver differential receiver special-purpose amplifier amplifier IC operational amplifier balanced audio input differential-to-single-ended conversion unity gain common-mode rejection slew rate THD PDIP-14 through-hole package precision on-chip resistor professional audio audio measurement signal integrity Texas Instruments INA2134 datasheet
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen