INA2134PAG4 - Unity-Gain Audio Receiver | Texas Instruments
部品番号: INA2134PAG4 ✓ 生産中INA2134PAG4 概要
An audio differential line receiver is a special-purpose amplifier that accepts a balanced audio signal and converts it into an unbalanced output referenced to ground. In the signal-chain hierarchy, the INA2134 belongs to the amplifier IC category, specifically the differential receiver and audio line-receiver class. Its internal precision resistors establish the differential gain, while the high-performance operational-amplifier cores provide the signal amplification and output drive.
The manufacturer identifies low distortion of 0.0005% at 1 kHz as a principal performance feature. A 14 V/µs slew rate supports rapid signal transitions, while the wide output-voltage swing and high output-drive capability make the device suitable for professional audio, instrumentation, and balanced-input equipment. The unity gain of 1 V/V avoids adding signal gain that could complicate system-level headroom planning.
The architecture combines precision on-chip resistors with operational amplifiers designed for low-distortion audio operation. This integrated approach reduces the number of external gain-setting components required for a balanced receiver stage. The INA2134PAG4 is a through-hole PDIP-14 device, making it appropriate for through-hole audio boards, prototypes, legacy equipment, and designs where a socketed package simplifies maintenance or replacement.
Typical uses include balanced professional-audio inputs, line-level receiver stages, audio measurement equipment, mixer-interface boards, and stereo differential-to-single-ended conversion. The receiver can sit between a balanced connector and downstream audio circuitry while rejecting common-mode interference encountered along longer cable runs. Its low distortion and fast slew rate preserve signal fidelity in these signal-chain applications.
Power-supply layout and signal grounding are critical for this line receiver. Use clean dual supplies, connect the device ground to the audio-signal reference, and route the differential pair away from switching nodes and high-current return paths. Confirm that input and output swing remain within the device limits throughout the signal amplitude and frequency range of the design.
This page combines manufacturer specifications, practical application guidance, package information, and verified cross-reference context to support component selection. It also identifies direct replacement constraints so engineers can distinguish a genuine PDIP-14 drop-in option from devices that merely perform a similar receiver function in another footprint.
ドロップイン代替品: INA2134PAG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: INA2134PAG4 (同一形状・フットプリント) — 相違点: Voltage Gain.
INA2134PA
✅ ドロップイン価格はお問い合わせください
データシートを見る →INA2134PAG3
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
INA2134PAG4 最大定格&電気的特性
| Product Type | Audio differential line receiver |
| Receiver Configuration | 2 channels |
| Voltage Gain | 1 V/V |
| 電源電圧 | ±18 V |
| Minimum Supply Voltage | 4 V |
| Maximum Supply Voltage | 36 V |
| Distortion | 0.0005% at 1 kHz |
| Slew Rate | 14 V/µs |
| Common-Mode Rejection | 74 dB minimum |
| Noise Floor | -100 dBu with 20 kHz bandwidth |
| Frequency | 3.10 MHz |
| パッケージ | 14-pin PDIP |
| 実装タイプ | Through-hole |
| Temperature Grade | Industrial |
| Number of Terminals | 14 |
INA2134PAG4 14-pin pdip ピン配置ガイド
INA2134PAG4 (14-pin pdip パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: INA2134PAG4.
詳細は データシート をご参照ください。
主な用途
INA2134PAG4 の用途: 6 件s: Balanced Professional Audio Input, Stereo Differential-to-Single-Ended Conversion, Audio Measurement Front End, Broadcast and Studio Line Interface, Legacy Audio Equipment Upgrade, Instrument Preamp and Balanced Source Interface.
Balanced Professional Audio Input
The INA2134PAG4 fits the first analog stage of a balanced professional-audio input because it converts a differential line signal into a single-ended output at 1 V/V gain. Its 0.0005% distortion at 1 kHz preserves low-level signal detail, while the 14 V/µs slew rate provides ample response for transient-heavy music and sound effects. The receiver’s common-mode rejection of at least 74 dB helps reduce hum and interference carried equally on both cable conductors. Place the device close to the input connector, maintain a continuous audio-ground return, and avoid routing the balanced pair beside power-converter nodes.
おすすめ
Stereo Differential-to-Single-Ended Conversion
The INA2134PAG4 is appropriate for stereo equipment that receives balanced left and right channels but drives conventional unbalanced circuitry. Its two receiver channels support symmetrical signal treatment, and the unity gain avoids amplifying the signal before the system’s volume-control or mixer stage. The 14-pin PDIP format is useful for through-hole mixer-interface boards, where replaceable sockets can simplify service. Because each channel must preserve channel separation, use matched routing and grounding, keep both input pairs away from switching supplies, and verify output swing at the highest expected program level.
おすすめ
Audio Measurement Front End
The INA2134PAG4 can serve as the balanced input receiver in audio measurement and test equipment where the source uses a differential line interface. Its low 0.0005% distortion at 1 kHz helps preserve measurement integrity, while unity gain provides a controlled interface level to downstream converters. The 74 dB minimum common-mode rejection reduces the influence of common-mode noise on sensitive measurements. Use short, shielded differential connections, provide low-noise dual supplies, and keep the receiver’s ground tied to the instrument signal reference rather than allowing separate ground currents to share the same path.
おすすめ
Broadcast and Studio Line Interface
The INA2134PAG4 is suitable for broadcast, studio, and live-sound line interfaces that need accurate balanced-input conversion without an external gain network. Its fast 14 V/µs slew rate supports transient reproduction, while the wide output swing and high output-drive capability help maintain signal integrity into the next analog stage. The receiver’s precision on-chip resistors make the gain repeatable across production units. For rack and studio equipment, use an isolated or properly referenced supply arrangement, provide local input bypassing, and validate grounding to prevent earth-loop noise from entering the audio path.
おすすめ
Legacy Audio Equipment Upgrade
The INA2134PAG4 is a practical upgrade option for legacy professional-audio equipment that uses a 14-pin PDIP balanced-input stage and requires modern low-distortion performance. Its through-hole package can fit existing through-hole layouts without a fine-pitch SMD rework process, provided the original pin functions match. The unity-gain architecture is useful when replacing discrete balanced receiver stages that previously required several precision resistors and additional gain planning. Before installation, compare the original device’s supply voltage, common-mode range, output swing, and grounding arrangement. Socket the device where maintenance access and replacement speed are priorities.
おすすめ
Instrument Preamp and Balanced Source Interface
The INA2134PAG4 can form the balanced source interface of an instrument preamplifier when the source supplies a differential line-level signal. Unity gain preserves the source level for later gain control, and the low distortion supports clean reproduction of musical dynamics. Its common-mode rejection is valuable when the instrument cable is longer than a short bench connection and the input may pickup environmental interference. Keep the input impedance arrangement consistent with the source specification, observe common-mode and output limits, and avoid introducing a second unity-gain stage unless headroom analysis clearly requires it.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: INA2134PAG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | INA2134PA | INA2134PAG3 |
|---|---|---|---|
| Package | 14-pin PDIP | 14-pin PDIP - same | 14-pin PDIP - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Audio differential line receiver | Audio differential line receiver | Audio differential line receiver |
| Voltage Gain | 1 V/V | 1 V/V | 1 V/V |
| Supply Voltage | ±18 V | ±18 V | ±18 V |
| Distortion | 0.0005% at 1 kHz | 0.0005% at 1 kHz | 0.0005% at 1 kHz |
| Slew Rate | 14 V/µs | 14 V/µs | 14 V/µs |
| Common-Mode Rejection | 74 dB minimum | 74 dB minimum | 74 dB minimum |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Mounting Type | Through-hole | Through-hole | Through-hole |
主な差別化要因
- Uses the same 14-pin PDIP interface as the principal package-compatible replacement candidate (vs INA2134PA)
- Provides a two-channel unity-gain receiver rather than a single-ended amplifier interface (vs AD8018ARZ)
- Combines 0.0005% distortion with a 14 V/µs slew rate in a through-hole audio package (vs INA2134PAG3)
設計ノート
Route the differential input pair as a tightly coupled pair and connect it directly to the INA2134PAG4 input pins. Keep the pair away from switching-regulator power traces, relay contacts, and high-current motor returns. Place input-referenced bypass components at the supply pins rather than at a remote power entry point. This arrangement limits common-mode pickup and preserves the benefit of the receiver’s 74 dB minimum common-mode rejection.
Do not treat any INA-series differential receiver as interchangeable solely because it is called a line receiver. Verify the 14-pin PDIP footprint, two-channel architecture, unity gain, supply polarity, common-mode range, and output swing against the manufacturer pin and electrical tables. The INA134 has a different family configuration, so an INA134 candidate should not be fitted to this board without a confirmed pin-for-pin comparison.
For balanced cables, maintain a continuous ground reference and terminate according to the source and system architecture rather than adding an improvised jumper between grounds. Keep the receiver close to the connector to limit antenna pickup, use shielded cable where required, and test both channels for hum and channel-to-channel leakage. The fast 14 V/µs slew rate supports signal dynamics, but it cannot compensate for unstable reference grounding or an overdriven input.
Provide the dual supply required by the application and decouple each rail close to the device pins. The manufacturer identifies operation up to ±18 V, but system transients, startup states, and unregulated rails can exceed nominal limits. Confirm minimum operating voltage, absolute maximum conditions, power-up sequencing, and output behavior during rail startup before connecting the receiver to external equipment.
コンプライアンス情報
No target-specific compliance declarations were identified for INA2134PAG4. RoHS was mentioned for the related INA2134UA in a comparison record, but that statement was not transferred to this ordering code.