Microchip Technology

KSZ8873MLLI-TR - 3-Port 10/100 Ethernet Switch | Microchip (Tape & Reel)

Teilenummer: KSZ8873MLLI-TR ✓ Aktiv
1.8 V, 2.5 V, or 3.3 V Vdss 64-pin PQFP Package
MOQ: 1 |

KSZ8873MLLI-TR Übersicht

Microchip KSZ8873MLLI-TR is a highly integrated 3-port managed Ethernet switch with integrated 10/100 PHYs, an MII interface, and I2C and SPI management interfaces in a 64-pin PQFP package measuring 10 x 10 mm. It is designed for cost-sensitive, power-efficient, low-port-count Ethernet systems operating at 10/100 Mbps.

A managed Ethernet switch is a network interface IC that combines multiple physical-layer transceivers, frame handling, port management, and configuration logic on one semiconductor. Within the broader hierarchy, the KSZ8873MLLI-TR is an Ethernet switch, managed switch, network interface IC, and integrated circuit. This integration reduces the component count required for a small three-port Ethernet node while allowing software-controlled configuration and status monitoring.

The device provides three 10/100 Ethernet ports with integrated PHYs. According to the Microchip KSZ8873 product page, the KSZ8873MML, MLL, FLL, and RLL versions target low-port-count, cost-sensitive, and power-efficient 10/100 Mbps switch systems. The MLL variant used by KSZ8873MLLI-TR supports an MII connection and can be managed through I2C or SPI, making it suitable for embedded control systems that need configurable Ethernet ports without a separate switch controller.

The 64-PQFP package provides 64 electrical positions for the three integrated PHYs, management interfaces, clocks, power rails, resets, indicators, and auxiliary I/O. Because the package exposes a substantial number of mixed-signal and digital functions, careful partitioning of analog supply, digital supply, and ground connections is important for stable operation. Decoupling should be placed directly beside the relevant supply pins, while high-speed Ethernet traces require controlled impedance and minimized crosstalk.

Typical applications include industrial Ethernet gateways, embedded control systems, factory-automation equipment, IoT controllers, networked sensors, industrial HMI panels, and compact embedded platforms that require three Fast Ethernet ports. The integrated PHY architecture is especially useful where board area and external component count are more important than multi-gigabit performance.

Designers should verify the exact MLL pinout, internal bonding configuration, supply sequencing, and supported operating mode before committing a PCB layout. Microchip states that the KSZ8873 RLL, MLL, and FLL versions are not interchangeable because their internal bonding differs, and the operating mode cannot be changed through an external pin or register setting. Firmware must therefore configure the device strictly as an MLL part.

This page consolidates the manufacturer product description, interface and package details, sourcing information, substitution constraints, and practical integration guidance. It also distinguishes the MLL implementation from related KSZ8873 versions so engineers can avoid an electrically similar but mechanically and functionally unsuitable substitution.

Drop-in-Alternativen für KSZ8873MLLI-TR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

KSZ8873MLLI-TR Grenzwerte & elektrische Eigenschaften

Product Type 3-port managed Ethernet switch with integrated PHYs
Number of Ethernet Ports 3 ports
Ethernet Data Rate 10/100 Mbps
Host Interface MII
Management Interfaces I2C and SPI
Package Type 64-pin PQFP
Package Body Size 10 x 10 mm
Montageart Surface mount
Integrated PHYs 3 integrated 10/100 PHYs
Product Family KSZ8873
Device Variant KSZ8873MLLI-TR, MLL configuration
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V

KSZ8873MLLI-TR 10 x 10 mm Pinbelegungsleitfaden

Pinbelegung für KSZ8873MLLI-TR (10 x 10 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für KSZ8873MLLI-TR im 10 x 10 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für KSZ8873MLLI-TR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

KSZ8873MLLI-TR ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway, IoT Network Controller, Factory Automation Equipment, Networked Sensor Hub, Embedded HMI Controller, Compact Network Appliance.

🏭

Industrial Ethernet Gateway

The KSZ8873MLLI-TR fits an industrial gateway that must aggregate three 10/100 Mbps network segments while remaining compact and power efficient. Its 3 integrated PHYs remove the need for separate Ethernet transceiver circuits on each copper port, while MII provides a direct path to an application processor. I2C or SPI management allows the host firmware to configure the switch and monitor port status without using a separate network controller. The 64-pin PQFP footprint requires deliberate high-speed trace routing and separate analog and digital supply decoupling, but it offers more integration than a discrete switch implementation.

🧩

IoT Network Controller

The KSZ8873MLLI-TR is suitable for a connected IoT controller with three 10/100 Mbps Ethernet ports, such as a building gateway, environmental controller, or edge device. Integrated PHYs reduce board area, and the MII interface allows an embedded processor to participate directly in Ethernet traffic. Management through I2C or SPI supports configuration, diagnostics, and port monitoring in software. For compact IoT products, the main engineering consideration is that the MLL configuration is specific: firmware, PCB routing, and any substitution must follow the MLL pinout rather than the related FLL, RLL, or MML implementations.

🏭

Factory Automation Equipment

A factory-automation controller can use the KSZ8873MLLI-TR to combine machine-network, service-network, and management-network links in one 3-port Fast Ethernet switch. The integrated 10/100 PHYs support cost-sensitive industrial Ethernet equipment, while MII and I2C or SPI control support flexible host partitioning. The device is especially useful when three ports are sufficient and power consumption and external component count matter. Before production release, confirm the operating-temperature grade, isolation strategy, magnetics or magnetics integration, surge requirements, and grounding arrangement required by the target industrial installation.

📡

Networked Sensor Hub

The KSZ8873MLLI-TR can centralize three 10/100 Mbps sensor links in a compact sensor hub, machine-vision controller, or environmental monitoring appliance. A host processor using MII can exchange data with connected sensors, while I2C or SPI provides a separate path for configuration and status. This partition avoids forcing management traffic through the MII data interface. Board implementation should preserve differential-pair geometry for all three Ethernet ports, provide local high-frequency bypass capacitance, and keep switch-management signals away from sensitive clock and Ethernet routing wherever possible.

📺

Embedded HMI Controller

An industrial human-machine interface can use the KSZ8873MLLI-TR to connect a local panel, programmable controller, and service network through three Fast Ethernet ports. The managed-switch architecture allows software to observe port activity and control network behavior, while the MII interface gives the display or control processor a deterministic hardware connection. The PQFP package is appropriate for industrial controller boards where thermal management and rework standards favor leaded packages. Validate the MLL startup mode, network clock source, reset behavior, and software register defaults before production to prevent configuration mismatch between assembled units.

🌐

Compact Network Appliance

The KSZ8873MLLI-TR fits compact network appliances that need several Fast Ethernet ports but do not require gigabit switching, such as monitoring gateways, building controllers, and embedded protocol converters. Three integrated PHYs create a compact three-port switching node, and the MII interface supports connection to a host processor. Compared with a collection of discrete Ethernet controllers, this arrangement reduces PCB area and component count. The design must still budget correctly for transceiver magnetics or integrated magnetics, regulatory-compliant cable interfaces, Ethernet clock distribution, and the thermal performance of the 64-pin PQFP under sustained traffic.

What is the KSZ8873MLLI-TR?
The KSZ8873MLLI-TR is a 3-port managed 10/100 Mbps Ethernet switch with integrated PHYs, an MII host interface, and I2C and SPI management interfaces. Microchip describes the KSZ8873 family as a highly integrated 3-port switch-on-chip solution for low-port-count, cost-sensitive, and power-efficient Ethernet systems. The exact MPN is supplied in a 64-pin PQFP package measuring 10 x 10 mm.
How many Ethernet ports does the KSZ8873MLLI-TR have?
The KSZ8873MLLI-TR has 3 integrated 10/100 Ethernet ports. Its integrated PHY design supports Fast Ethernet connectivity without requiring a separate physical-layer transceiver for each port. The device is intended for compact network nodes where a three-port managed switch is sufficient, including industrial controllers, IoT equipment, factory-automation systems, and embedded network interfaces.
Which host interface does the KSZ8873MLLI-TR use?
The KSZ8873MLLI-TR uses an MII interface for connection to a network processor, microcontroller, or other Ethernet controller. The distributor product listing identifies the device as an Ethernet switch with one MII interface and separate I2C and SPI configuration interfaces. Use the MII pins according to the KSZ8873 MLL pin-description table when assigning processor and switch connections.
What package does the KSZ8873MLLI-TR use?
The KSZ8873MLLI-TR is supplied in a 64-pin PQFP package with a 10 x 10 mm body size. The package is a surface-mount PQFP, not a leadless QFN, so its perimeter leads require adequate solder-joint length and suitable land-pattern spacing. Confirm the exact MLL pin assignments and exposed thermal requirements against the manufacturer pin-description table before routing the PCB.
Can KSZ8873FLL or KSZ8873RLL replace the KSZ8873MLLI-TR?
No. Microchip states that the KSZ8873 RLL, MLL, and FLL versions are not interchangeable because they use different internal bonding. Their operating mode cannot be changed through an external pin or register, and register 166 is read-only. Although the versions share the broader KSZ8873 product family, an MLL-specific PCB and firmware configuration should not be populated with an FLL or RLL device.
What is the best drop-in replacement for the KSZ8873MLLI-TR?
No confirmed drop-in replacement for the KSZ8873MLLI-TR is identified by the available manufacturer and cross-reference information. The KSZ8873FLL is sometimes presented as an alternative, but Microchip explicitly states that the FLL, MLL, and RLL configurations are not interchangeable because their internal bonding differs. Use the Request a Quote form on this page to request current sourcing and an engineering review of any proposed substitute.
KSZ8873MLLI-TR vs KSZ8873MML - which version should I use?
The KSZ8873MLLI-TR and KSZ8873MML are not confirmed as interchangeable for a finished PCB because they belong to different KSZ8873 configurations. Microchip specifically identifies the KSZ8873MML as having a different pinout and states that the KSZ8873 MLL, FLL, and RLL versions cannot substitute for one another. Treat the target board as an MLL design and verify every pin against the MLL datasheet.
When should I choose the KSZ8873MLLI-TR over another Ethernet switch?
Choose the KSZ8873MLLI-TR when a design needs exactly 3 integrated 10/100 Mbps ports, software-visible switch management, and an MII connection to a host processor. It is well suited to compact industrial, IoT, and embedded systems where the 64-pin PQFP package and integrated PHYs simplify board construction. Choose another switch only after confirming its port count, management interface, host interface, package, and pinout match the PCB.
Is the KSZ8873MLLI-TR suitable for industrial Ethernet equipment?
The KSZ8873MLLI-TR is architecturally suitable for industrial Ethernet gateways, factory-automation controllers, networked sensors, and industrial HMI equipment because it integrates three 10/100 Mbps PHYs into one compact device. Final suitability still depends on the device's specified operating-temperature range, electrical limits, isolation requirements, and environmental certification. Verify those limits in the manufacturer documentation for the selected grade.
Where can I download the KSZ8873MLLI-TR datasheet PDF?
The manufacturer datasheet and product resources are available through the Microchip KSZ8873 product page at https://www.microchip.com/en-us/product/KSZ8873. Start with the MLL ordering information, pin-description table, electrical characteristics, and typical application schematic. The page is the preferred source because related FLL, RLL, and MML variants have materially different bonding or pinout constraints.
Where can I find the KSZ8873MLLI-TR pinout?
The KSZ8873MLLI-TR pinout is documented in the MLL pin-description table within the Microchip KSZ8873 technical documentation. The device uses a 64-pin PQFP package, but the public product description alone does not provide the individual signal names needed to route a PCB. Use the manufacturer pin table to assign all MII, management, clock, reset, power, indicator, and auxiliary signals.
How is the KSZ8873MLLI-TR managed?
The KSZ8873MLLI-TR can be managed through I2C or SPI, as identified in its distributor listing, and it also provides an MII host interface for Ethernet traffic. Management access allows a host controller to configure switch behavior and read status rather than relying entirely on fixed hardware strapping. The exact register map and boot behavior should be taken from the MLL configuration and register documentation.
Where can I buy the KSZ8873MLLI-TR online?
The KSZ8873MLLI-TR can be requested through the Request a Quote form on this page. The form supports a direct quotation request for the exact 64-pin PQFP MPN and helps avoid accidental substitution with the incompatible MML, FLL, or RLL versions. Confirm the package suffix, delivery format, order quantity, target date, and traceability requirements before releasing the order.
What is the price of the KSZ8873MLLI-TR?
Current commercial pricing is not stated on this page because prices can change with quantity, supply status, delivery format, and purchasing terms. Submit the KSZ8873MLLI-TR exact MPN through the Request a Quote form on this page to obtain a current quotation. The request should include your target quantity, packaging requirements, shipment destination, and required lead time.
What is the lead time for the KSZ8873MLLI-TR?
The current production and delivery lead time for the KSZ8873MLLI-TR should be confirmed through the Request a Quote form on this page. Lead time can depend on exact package code, order quantity, quality requirements, and current factory scheduling. Include the complete MPN KSZ8873MLLI-TR in the request so the quotation and availability confirmation apply to the intended device configuration.
Is the KSZ8873MLLI-TR in stock?
Current stock should be confirmed through the Request a Quote form on this page rather than inferred from a distributor landing page. The KSZ8873MLLI-TR is the exact 64-pin PQFP MLL configuration, and related KSZ8873 variants are not automatically interchangeable. A quotation request lets the supply team confirm availability, delivery schedule, lot traceability, and the correct manufacturer suffix for your assembly.
What are the key specifications engineers should know about the KSZ8873MLLI-TR?
The key KSZ8873MLLI-TR specifications are its 3-port managed Ethernet architecture, 10/100 Mbps operation, integrated PHYs, MII host interface, I2C and SPI management, and 64-pin 10 x 10 mm PQFP package. Microchip positions the KSZ8873 family for low-port-count, cost-sensitive, power-efficient systems. The most important selection constraint is that MLL, FLL, RLL, and MML configurations are not interchangeable.

Technische Referenzdaten für KSZ8873MLLI-TR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the KSZ8873MLLI-TR when the design needs exactly three 10/100 Mbps ports, integrated PHYs, an MII connection to a host processor, and I2C or SPI switch management in a 64-pin PQFP package. It is especially appropriate for compact industrial, IoT, automation, monitoring, and embedded systems where low port count, integration, and power efficiency outweigh multi-gigabit performance. Do not select the KSZ8873FLL or KSZ8873RLL as drop-in replacements because Microchip states that their internal bonding differs from the MLL version and the mode cannot be changed externally. The KSZ8873MML is also unsuitable as a board-level substitute because its pinout differs. If no confirmed drop-in alternative exists, retain the KSZ8873MLLI-TR footprint and request an engineering review for any proposed substitute, verifying package, pinout, internal mode, clocking, management registers, PHY behavior, and thermal limits together.

Vergleich mit Alternativen

Parameter Dieses Produkt
Manufacturer Microchip Technology
Package 64-pin PQFP, 10 x 10 mm
Port Count 3 ports
Ethernet Rate 10/100 Mbps
PHY Integration 3 integrated 10/100 PHYs
Host Interface MII
Management Interface I2C and SPI
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Configuration Compatibility KSZ8873 MLL configuration

Wichtigste Unterscheidungsmerkmale

  • Three integrated Fast Ethernet PHYs (vs. KSZ8873FLL)
  • Explicit MII host connection (vs. KSZ8873RLL)
  • Programmable management through I2C and SPI (vs. KSZ8873MML)

Designhinweise

Route each of the three Ethernet differential pairs as a controlled-impedance, tightly coupled pair with minimal vias and no stubs. Keep the MII clock and data routing away from Ethernet magnetics or PHY supply-return paths where practical. Place the Ethernet input and output bypass capacitors adjacent to their associated PHY pins, and provide a continuous ground reference beneath the high-speed and power-return paths. Check the manufacturer reference layout and magnetics implementation before releasing fabrication files.

Do not substitute the KSZ8873FLL, KSZ8873RLL, or KSZ8873MML for the KSZ8873MLLI-TR without a manufacturer-approved board-specific review. Microchip states that the FLL, MLL, and RLL versions have different internal bonding and cannot be selected through an external pin or writable register, while the MML also has a different pinout. Treat MLL firmware, pin assignments, reset behavior, and the physical BOM as one controlled configuration.

Partition the board into the supply domains shown by the manufacturer application circuit and place local ceramic bypass capacitance at each power pin. Keep the switching or active circuitry associated with each PHY close to its ground-return path, and avoid sharing narrow return routes between distant pins. Estimate copper and junction-temperature rise at the highest expected traffic and ambient temperature; the estimated dissipation equals the total regulator input power minus output power, while junction rise is estimated as power dissipation multiplied by the PCB-specific thermal resistance.

Use the manufacturer's recommended MII timing, clock source, and reset sequence. The MII bus can be sensitive to clock jitter, trace skew, and excessive loading, so route the interface as a compact source-synchronous group between the host processor and switch. Confirm that the host timing is compatible with the operating mode selected for the MLL variant, and do not assume that related KSZ8873 modes expose equivalent startup or configuration behavior.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance information is not stated in the manufacturer product description or the distributor excerpts. The related-device comparison reports RoHS and REACH information, but it does not establish those statuses for the exact KSZ8873MLLI-TR ordering code.

Ähnliche Suchanfragen

KSZ8873MLLI-TR datasheet KSZ8873MLLI-TR pinout KSZ8873MLLI-TR datasheet pdf KSZ8873MLLI-TR specifications KSZ8873MLLI-TR 64 PQFP KSZ8873MLLI-TR MII interface KSZ8873MLLI-TR equivalent KSZ8873MLLI-TR replacement KSZ8873MLLI-TR cross reference KSZ8873MLLI-TR vs KSZ8873FLL KSZ8873MLLI-TR industrial Ethernet KSZ8873MLLI-TR price KSZ8873MLLI-TR stock Microchip KSZ8873MLLI-TR

Verwandte Bauteile & Begriffe

Microchip Technology KSZ8873MLLI-TR KSZ8873 KSZ8873 MLL KSZ8873FLL KSZ8873RLL KSZ8873MML 3-port Ethernet switch managed Ethernet switch switch-on-chip Ethernet interface IC network interface IC integrated circuit 10/100 Mbps Ethernet 10BASE-T 100BASE-TX integrated PHY Media Independent Interface MII I2C SPI 64-pin PQFP 10 x 10 mm package industrial Ethernet IoT controller factory automation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen