KSZ8873MLLI-TR - 3-Port 10/100 Ethernet Switch | Microchip (Tape & Reel)
料号: KSZ8873MLLI-TR ✓ 量产中KSZ8873MLLI-TR 概述
A managed Ethernet switch is a network interface IC that combines multiple physical-layer transceivers, frame handling, port management, and configuration logic on one semiconductor. Within the broader hierarchy, the KSZ8873MLLI-TR is an Ethernet switch, managed switch, network interface IC, and integrated circuit. This integration reduces the component count required for a small three-port Ethernet node while allowing software-controlled configuration and status monitoring.
The device provides three 10/100 Ethernet ports with integrated PHYs. According to the Microchip KSZ8873 product page, the KSZ8873MML, MLL, FLL, and RLL versions target low-port-count, cost-sensitive, and power-efficient 10/100 Mbps switch systems. The MLL variant used by KSZ8873MLLI-TR supports an MII connection and can be managed through I2C or SPI, making it suitable for embedded control systems that need configurable Ethernet ports without a separate switch controller.
The 64-PQFP package provides 64 electrical positions for the three integrated PHYs, management interfaces, clocks, power rails, resets, indicators, and auxiliary I/O. Because the package exposes a substantial number of mixed-signal and digital functions, careful partitioning of analog supply, digital supply, and ground connections is important for stable operation. Decoupling should be placed directly beside the relevant supply pins, while high-speed Ethernet traces require controlled impedance and minimized crosstalk.
Typical applications include industrial Ethernet gateways, embedded control systems, factory-automation equipment, IoT controllers, networked sensors, industrial HMI panels, and compact embedded platforms that require three Fast Ethernet ports. The integrated PHY architecture is especially useful where board area and external component count are more important than multi-gigabit performance.
Designers should verify the exact MLL pinout, internal bonding configuration, supply sequencing, and supported operating mode before committing a PCB layout. Microchip states that the KSZ8873 RLL, MLL, and FLL versions are not interchangeable because their internal bonding differs, and the operating mode cannot be changed through an external pin or register setting. Firmware must therefore configure the device strictly as an MLL part.
This page consolidates the manufacturer product description, interface and package details, sourcing information, substitution constraints, and practical integration guidance. It also distinguishes the MLL implementation from related KSZ8873 versions so engineers can avoid an electrically similar but mechanically and functionally unsuitable substitution.
直接替换替代料: KSZ8873MLLI-TR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料KSZ8873MLLI-TR 最大额定值与电气特性
| Product Type | 3-port managed Ethernet switch with integrated PHYs |
| Number of Ethernet Ports | 3 ports |
| Ethernet Data Rate | 10/100 Mbps |
| Host Interface | MII |
| Management Interfaces | I2C and SPI |
| Package Type | 64-pin PQFP |
| Package Body Size | 10 x 10 mm |
| 安装类型 | Surface mount |
| Integrated PHYs | 3 integrated 10/100 PHYs |
| Product Family | KSZ8873 |
| Device Variant | KSZ8873MLLI-TR, MLL configuration |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
KSZ8873MLLI-TR 10 x 10 mm 引脚配置指南
KSZ8873MLLI-TR(10 x 10 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: KSZ8873MLLI-TR.
请参阅 数据手册 以查看完整引脚配置。
典型应用
KSZ8873MLLI-TR 适用于 6 应用s: Industrial Ethernet Gateway, IoT Network Controller, Factory Automation Equipment, Networked Sensor Hub, Embedded HMI Controller, Compact Network Appliance.
Industrial Ethernet Gateway
The KSZ8873MLLI-TR fits an industrial gateway that must aggregate three 10/100 Mbps network segments while remaining compact and power efficient. Its 3 integrated PHYs remove the need for separate Ethernet transceiver circuits on each copper port, while MII provides a direct path to an application processor. I2C or SPI management allows the host firmware to configure the switch and monitor port status without using a separate network controller. The 64-pin PQFP footprint requires deliberate high-speed trace routing and separate analog and digital supply decoupling, but it offers more integration than a discrete switch implementation.
推荐
IoT Network Controller
The KSZ8873MLLI-TR is suitable for a connected IoT controller with three 10/100 Mbps Ethernet ports, such as a building gateway, environmental controller, or edge device. Integrated PHYs reduce board area, and the MII interface allows an embedded processor to participate directly in Ethernet traffic. Management through I2C or SPI supports configuration, diagnostics, and port monitoring in software. For compact IoT products, the main engineering consideration is that the MLL configuration is specific: firmware, PCB routing, and any substitution must follow the MLL pinout rather than the related FLL, RLL, or MML implementations.
推荐
Factory Automation Equipment
A factory-automation controller can use the KSZ8873MLLI-TR to combine machine-network, service-network, and management-network links in one 3-port Fast Ethernet switch. The integrated 10/100 PHYs support cost-sensitive industrial Ethernet equipment, while MII and I2C or SPI control support flexible host partitioning. The device is especially useful when three ports are sufficient and power consumption and external component count matter. Before production release, confirm the operating-temperature grade, isolation strategy, magnetics or magnetics integration, surge requirements, and grounding arrangement required by the target industrial installation.
推荐
Networked Sensor Hub
The KSZ8873MLLI-TR can centralize three 10/100 Mbps sensor links in a compact sensor hub, machine-vision controller, or environmental monitoring appliance. A host processor using MII can exchange data with connected sensors, while I2C or SPI provides a separate path for configuration and status. This partition avoids forcing management traffic through the MII data interface. Board implementation should preserve differential-pair geometry for all three Ethernet ports, provide local high-frequency bypass capacitance, and keep switch-management signals away from sensitive clock and Ethernet routing wherever possible.
推荐
Embedded HMI Controller
An industrial human-machine interface can use the KSZ8873MLLI-TR to connect a local panel, programmable controller, and service network through three Fast Ethernet ports. The managed-switch architecture allows software to observe port activity and control network behavior, while the MII interface gives the display or control processor a deterministic hardware connection. The PQFP package is appropriate for industrial controller boards where thermal management and rework standards favor leaded packages. Validate the MLL startup mode, network clock source, reset behavior, and software register defaults before production to prevent configuration mismatch between assembled units.
推荐
Compact Network Appliance
The KSZ8873MLLI-TR fits compact network appliances that need several Fast Ethernet ports but do not require gigabit switching, such as monitoring gateways, building controllers, and embedded protocol converters. Three integrated PHYs create a compact three-port switching node, and the MII interface supports connection to a host processor. Compared with a collection of discrete Ethernet controllers, this arrangement reduces PCB area and component count. The design must still budget correctly for transceiver magnetics or integrated magnetics, regulatory-compliant cable interfaces, Ethernet clock distribution, and the thermal performance of the 64-pin PQFP under sustained traffic.
推荐
推荐产品汇总
工程参考数据: KSZ8873MLLI-TR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Manufacturer | Microchip Technology |
| Package | 64-pin PQFP, 10 x 10 mm |
| Port Count | 3 ports |
| Ethernet Rate | 10/100 Mbps |
| PHY Integration | 3 integrated 10/100 PHYs |
| Host Interface | MII |
| Management Interface | I2C and SPI |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Configuration Compatibility | KSZ8873 MLL configuration |
关键差异点
- Three integrated Fast Ethernet PHYs (对比 KSZ8873FLL)
- Explicit MII host connection (对比 KSZ8873RLL)
- Programmable management through I2C and SPI (对比 KSZ8873MML)
设计说明
Route each of the three Ethernet differential pairs as a controlled-impedance, tightly coupled pair with minimal vias and no stubs. Keep the MII clock and data routing away from Ethernet magnetics or PHY supply-return paths where practical. Place the Ethernet input and output bypass capacitors adjacent to their associated PHY pins, and provide a continuous ground reference beneath the high-speed and power-return paths. Check the manufacturer reference layout and magnetics implementation before releasing fabrication files.
Do not substitute the KSZ8873FLL, KSZ8873RLL, or KSZ8873MML for the KSZ8873MLLI-TR without a manufacturer-approved board-specific review. Microchip states that the FLL, MLL, and RLL versions have different internal bonding and cannot be selected through an external pin or writable register, while the MML also has a different pinout. Treat MLL firmware, pin assignments, reset behavior, and the physical BOM as one controlled configuration.
Partition the board into the supply domains shown by the manufacturer application circuit and place local ceramic bypass capacitance at each power pin. Keep the switching or active circuitry associated with each PHY close to its ground-return path, and avoid sharing narrow return routes between distant pins. Estimate copper and junction-temperature rise at the highest expected traffic and ambient temperature; the estimated dissipation equals the total regulator input power minus output power, while junction rise is estimated as power dissipation multiplied by the PCB-specific thermal resistance.
Use the manufacturer's recommended MII timing, clock source, and reset sequence. The MII bus can be sensitive to clock jitter, trace skew, and excessive loading, so route the interface as a compact source-synchronous group between the host processor and switch. Confirm that the host timing is compatible with the operating mode selected for the MLL variant, and do not assume that related KSZ8873 modes expose equivalent startup or configuration behavior.
合规信息
Compliance information is not stated in the manufacturer product description or the distributor excerpts. The related-device comparison reports RoHS and REACH information, but it does not establish those statuses for the exact KSZ8873MLLI-TR ordering code.