LC4128V-5T144C - 227MHz 128-Macro-Cell CPLD | Lattice
Teilenummer: LC4128V-5T144C ✗ AbgekündigtLC4128V-5T144C Übersicht
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic arrays with non-volatile configuration memory. In the product hierarchy, a CPLD sits between simple programmable logic and an FPGA, offering deterministic timing, comparatively simple design tools, and persistent configuration. The LC4128V family is intended for designs that require more logic capacity than a basic PLD without moving to the resource allocation and configuration complexity of a large FPGA.
The device provides up to 380 MHz maximum operating frequency and 2.5 ns propagation delay, while the -5 speed grade is identified with 227 MHz operating performance in the product listing. Its 3.3 V, 2.5 V, and 1.8 V supply options allow the same device family to address multiple industrial, telecommunications, and consumer logic platforms. In-system programming supports configuration updates without removing the device from the finished circuit.
The LC4128V architecture organizes 128 macro cells into programmable logic structures suitable for control logic, interface translation, bus arbitration, state machines, and general-purpose glue logic. Four global clock inputs are identified in the device information, providing a predictable basis for registered sequential designs. The 144-pin TQFP package also provides a substantial number of dedicated I/O resources, making the device appropriate for designs with multiple external buses or control signals.
Typical uses include industrial automation, telecommunications equipment, consumer electronics, embedded control, and board-level interface consolidation. In these systems, the LC4128V can absorb protocol conversion, timing control, and peripheral-interface logic while preserving a deterministic implementation. Designers can also use the same programmable platform to support multiple product variants without changing the PCB layout.
When assigning the device, verify its complete 144-pin signal list, configuration interface requirements, clock expectations, and I/O standards against the manufacturer datasheet. Pay particular attention to the distinction between maximum operating frequency, the -5 timing grade, and the 227 MHz operating figure used in distributor listings.
This product page combines package, timing, architecture, and application guidance with practical design considerations. It also identifies pin-compatible family alternatives and explains where timing-grade or temperature-grade changes affect replacement decisions, providing engineering context beyond a basic distributor listing.
Drop-in-Alternativen für LC4128V-5T144C – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
LC4128V-5T144I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LC4128V-4T144C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LC4128V-7T144C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LC4128V-10T144C
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LC4128V-5TN144C
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LC4128V-5T144C Grenzwerte & elektrische Eigenschaften
| Device Type | In-system-programmable SuperFAST high-density CPLD |
| Macro Cell Count | 128 macro cells |
| Maximum Operating Frequency | 380 MHz |
| Listed Operating Performance | 227 MHz |
| Propagation Delay | 2.5 ns |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Global Clock Inputs | 4 clocks |
| User I/O Count | 64 I/O |
| Package Type | 144-pin TQFP |
| Package Dimensions | 20 mm x 20 mm |
| Package Pitch | 0.5 mm |
| Montageart | Surface mount |
| Junction Temperature Range | 0 °C to 90 °C |
| Packaging | Tray |
| Logic Family | CMOS |
| Configuration Method | In-system programmable |
LC4128V-5T144C 0.5 mm Pinbelegungsleitfaden
Pinbelegung für LC4128V-5T144C (0.5 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für LC4128V-5T144C.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LC4128V-5T144C ist geeignet für 6 Anwendungs: Industrial Automation Control, Telecommunications Interface Consolidation, Embedded System Glue Logic, Data Acquisition and Measurement Control, Consumer Electronics Feature Control, Board-Level Bus Arbitration.
Industrial Automation Control
The LC4128V-5T144C fits industrial automation control because its 128 macro cells can consolidate state machines, interlocks, alarm logic, and peripheral control functions in one programmable device. The 2.5 ns propagation delay and up to 380 MHz maximum operating frequency provide strong timing capability for clocked control paths. In-system programming allows line-specific logic updates after board assembly. Its 144-pin TQFP footprint provides numerous I/O connections, while the listed 0 °C to 90 °C junction range suits designs where industrial temperature qualification is handled at the system level.
Empfohlen
Telecommunications Interface Consolidation
The LC4128V-5T144C is useful in telecommunications equipment that needs deterministic protocol translation, channel control, and status multiplexing on the same board. Its 128 macro cells and 144-pin TQFP package provide more routing and I/O capacity than a small PLD without requiring the general-purpose resource model of a large FPGA. The selectable 3.3 V, 2.5 V, or 1.8 V supply configurations can simplify multi-voltage board integration, although each rail and interface standard must satisfy the device configuration requirements before use.
Empfohlen
Embedded System Glue Logic
The LC4128V-5T144C can serve as a programmable companion to a microcontroller or processor, implementing glue logic such as bus arbitration, interrupt steering, latch control, watchdog coordination, and peripheral chip selection. Its in-system-programmable architecture supports configuration changes without removing the assembly, which is useful during product qualification. The -5 timing grade provides a stronger timing margin than slower LC4128V options, while the 144-pin package supports systems with numerous external signals requiring deterministic control.
Empfohlen
Data Acquisition and Measurement Control
The LC4128V-5T144C can coordinate data-acquisition systems by implementing trigger sequencing, channel selection, timing control, and interface conversion in deterministic programmable logic. Its 128 macro cells are suitable for moderate control complexity, and the 2.5 ns propagation delay supports short combinational timing paths. Multiple global clock inputs help organize related acquisition domains. For precision analog measurement systems, use the CPLD for digital control while preserving analog accuracy through separate reference, analog-switch, and converter components.
Empfohlen
Consumer Electronics Feature Control
The LC4128V-5T144C fits consumer electronics that require flexible mode handling, display control, button processing, and peripheral arbitration. In-system programming supports product configuration and revision management, while the 128-macro-cell architecture consolidates several small discrete control functions. The available 1.8 V, 2.5 V, and 3.3 V supply options assist integration with processors and memory operating at different voltage levels. The 144-pin TQFP package provides enough external connectivity for multi-function boards while retaining a deterministic logic implementation.
Empfohlen
Board-Level Bus Arbitration
The LC4128V-5T144C is appropriate for central bus arbitration where several masters, peripherals, or memory components require deterministic access control. The 128 macro cells can implement priority encoding, request and grant logic, timeout handling, and status decoding, while the 144-pin package supports the required control and bus signals. Its fast timing characteristics help minimize arbitration delay. Designers should use the family pin table to assign shared pins, configure the required I/O standards, and confirm that every connected bus voltage falls within the selected operating configuration.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LC4128V-5T144C – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LC4128V-5T144I | LC4128V-4T144C | LC4128V-7T144C | LC4128V-10T144C | LC4128V-5TN144C |
|---|---|---|---|---|---|---|
| Package | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Timing Grade | -5 | -5 | -4 | -7 | -10 | -5 |
Wichtigste Unterscheidungsmerkmale
- Faster timing grade than the nearby LC4128V-7T144C alternative (vs. LC4128V-7T144C)
- Retains the same -5 timing grade in an industrial temperature designation (vs. LC4128V-5T144I)
- Uses a 144-pin TQFP package with 64 listed user I/O (vs. LC4128V-4T144C)
- Supports three named supply-voltage configurations (vs. LC4128V-10T144C)
Designhinweise
Configure the LC4128V-5T144C for the voltage domain required by the board and follow the manufacturer configuration-circuit example for that supply option. The family supports 1.8 V, 2.5 V, and 3.3 V operation, but mixed-voltage I/O and configuration connections still require careful level verification. Place core, I/O, and configuration supply decoupling capacitors close to their associated pins, and confirm the permitted voltage combinations and power-up sequence in the family datasheet before routing the board.
Keep the 144-pin TQFP escape routes short enough to preserve the timing needed by the -5 grade, especially for clock, global clock, and high-fanout control paths. Maintain continuous ground references under the device and use a solid plane rather than fragmented copper where return paths are required. Account for the 0.5 mm lead pitch during fanout and assembly review. Use the manufacturer package drawing and pin table as the controlling geometry for land patterns and exposed routing areas.
Treat clock distribution as a dedicated layout task. Route clocks to the global clock inputs with short, direct paths, avoid unnecessary stubs, and keep them away from switching-node and high-current return paths. Although the family provides programmable global clock inputs, static timing analysis must still include the actual clock network and any external routing delay. For external interfaces, validate setup and hold margins at the slowest supported process, voltage, and temperature corner rather than relying only on the 2.5 ns propagation-delay figure.
Do not confuse the 380 MHz maximum operating-frequency specification, the -5 timing-grade designation, and the 227 MHz operating figure listed for this MPN. These describe different parts of the device timing characterization. Before substitution, also verify the exact pin table, temperature grade, supply configuration, and configuration interface. A same-footprint replacement can still fail timing or board operation if these four items are not matched.
Compliance-Informationen
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN. Obtain the current manufacturer product or quality declaration before treating the device as compliant or qualified.