Lattice Semiconductor

LC4128V-5T144C - 227MHz 128-Macro-Cell CPLD | Lattice

MPN: LC4128V-5T144C ✗ סוף ייצור
1.8 V, 2.5 V, or 3.3 V Vdss 144-pin TQFP Package 380 MHz Speed
כמות הזמנה מינימלית: 1 |

LC4128V-5T144C סקירה

The Lattice Semiconductor LC4128V-5T144C is an in-system-programmable SuperFAST high-density CPLD with 128 macro cells, 227 MHz operating performance, and a 144-pin TQFP package. It supports 3.3 V, 2.5 V, and 1.8 V supply configurations for systems requiring flexible logic density, fast propagation, and in-system reconfiguration.

A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic arrays with non-volatile configuration memory. In the product hierarchy, a CPLD sits between simple programmable logic and an FPGA, offering deterministic timing, comparatively simple design tools, and persistent configuration. The LC4128V family is intended for designs that require more logic capacity than a basic PLD without moving to the resource allocation and configuration complexity of a large FPGA.

The device provides up to 380 MHz maximum operating frequency and 2.5 ns propagation delay, while the -5 speed grade is identified with 227 MHz operating performance in the product listing. Its 3.3 V, 2.5 V, and 1.8 V supply options allow the same device family to address multiple industrial, telecommunications, and consumer logic platforms. In-system programming supports configuration updates without removing the device from the finished circuit.

The LC4128V architecture organizes 128 macro cells into programmable logic structures suitable for control logic, interface translation, bus arbitration, state machines, and general-purpose glue logic. Four global clock inputs are identified in the device information, providing a predictable basis for registered sequential designs. The 144-pin TQFP package also provides a substantial number of dedicated I/O resources, making the device appropriate for designs with multiple external buses or control signals.

Typical uses include industrial automation, telecommunications equipment, consumer electronics, embedded control, and board-level interface consolidation. In these systems, the LC4128V can absorb protocol conversion, timing control, and peripheral-interface logic while preserving a deterministic implementation. Designers can also use the same programmable platform to support multiple product variants without changing the PCB layout.

When assigning the device, verify its complete 144-pin signal list, configuration interface requirements, clock expectations, and I/O standards against the manufacturer datasheet. Pay particular attention to the distinction between maximum operating frequency, the -5 timing grade, and the 227 MHz operating figure used in distributor listings.

This product page combines package, timing, architecture, and application guidance with practical design considerations. It also identifies pin-compatible family alternatives and explains where timing-grade or temperature-grade changes affect replacement decisions, providing engineering context beyond a basic distributor listing.

חלופות תחליף ישיר עבור LC4128V-5T144C — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

LC4128V-5T144I

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TQFP-144
Retains the -5 timing grade and 128-macro-cell architecture while changing the temperature grade from commercial to industrial.

📋 חלופה להתייחסות (לא בקטלוג)

LC4128V-4T144C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TQFP-144
Uses the same 144-pin architecture but changes the timing-grade label from -5 to -4, increasing the grade-label interval by one step while retaining the footprint.

📋 חלופה להתייחסות (לא בקטלוג)

LC4128V-7T144C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TQFP-144
Uses the same 144-pin architecture but changes the timing-grade label from -5 to -7, a 40% increase in the numerical grade label and a slower performance target.

📋 חלופה להתייחסות (לא בקטלוג)

LC4128V-10T144C

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 TQFP-144
Uses the same 144-pin architecture but changes the timing-grade label from -5 to -10, doubling the numerical grade label and reducing timing performance.

📋 חלופה להתייחסות (לא בקטלוג)

LC4128V-5TN144C

✅ Drop-In
📦 TQFP-144
Retains the -5 timing grade and electrical configuration while using the N packaging code for tray presentation.

📋 חלופה להתייחסות (לא בקטלוג)

LC4128V-5T144C דירוגים מרביים ומאפיינים חשמליים

Device Type In-system-programmable SuperFAST high-density CPLD
Macro Cell Count 128 macro cells
Maximum Operating Frequency 380 MHz
Listed Operating Performance 227 MHz
Propagation Delay 2.5 ns
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Global Clock Inputs 4 clocks
User I/O Count 64 I/O
Package Type 144-pin TQFP
Package Dimensions 20 mm x 20 mm
Package Pitch 0.5 mm
סוג הרכבה Surface mount
Junction Temperature Range 0 °C to 90 °C
Packaging Tray
Logic Family CMOS
Configuration Method In-system programmable

מדריך תצורת פינים של LC4128V-5T144C 0.5 mm

תצורת פינים עבור LC4128V-5T144C (מארזת 0.5 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 0.5 mm עבור LC4128V-5T144C

אין נתוני פריסת פינים מפורטים עבור LC4128V-5T144C.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LC4128V-5T144C מתאים עבור 6 יישוםs: Industrial Automation Control, Telecommunications Interface Consolidation, Embedded System Glue Logic, Data Acquisition and Measurement Control, Consumer Electronics Feature Control, Board-Level Bus Arbitration.

🏭

Industrial Automation Control

The LC4128V-5T144C fits industrial automation control because its 128 macro cells can consolidate state machines, interlocks, alarm logic, and peripheral control functions in one programmable device. The 2.5 ns propagation delay and up to 380 MHz maximum operating frequency provide strong timing capability for clocked control paths. In-system programming allows line-specific logic updates after board assembly. Its 144-pin TQFP footprint provides numerous I/O connections, while the listed 0 °C to 90 °C junction range suits designs where industrial temperature qualification is handled at the system level.

🌐

Telecommunications Interface Consolidation

The LC4128V-5T144C is useful in telecommunications equipment that needs deterministic protocol translation, channel control, and status multiplexing on the same board. Its 128 macro cells and 144-pin TQFP package provide more routing and I/O capacity than a small PLD without requiring the general-purpose resource model of a large FPGA. The selectable 3.3 V, 2.5 V, or 1.8 V supply configurations can simplify multi-voltage board integration, although each rail and interface standard must satisfy the device configuration requirements before use.

🔧

Embedded System Glue Logic

The LC4128V-5T144C can serve as a programmable companion to a microcontroller or processor, implementing glue logic such as bus arbitration, interrupt steering, latch control, watchdog coordination, and peripheral chip selection. Its in-system-programmable architecture supports configuration changes without removing the assembly, which is useful during product qualification. The -5 timing grade provides a stronger timing margin than slower LC4128V options, while the 144-pin package supports systems with numerous external signals requiring deterministic control.

📊

Data Acquisition and Measurement Control

The LC4128V-5T144C can coordinate data-acquisition systems by implementing trigger sequencing, channel selection, timing control, and interface conversion in deterministic programmable logic. Its 128 macro cells are suitable for moderate control complexity, and the 2.5 ns propagation delay supports short combinational timing paths. Multiple global clock inputs help organize related acquisition domains. For precision analog measurement systems, use the CPLD for digital control while preserving analog accuracy through separate reference, analog-switch, and converter components.

📱

Consumer Electronics Feature Control

The LC4128V-5T144C fits consumer electronics that require flexible mode handling, display control, button processing, and peripheral arbitration. In-system programming supports product configuration and revision management, while the 128-macro-cell architecture consolidates several small discrete control functions. The available 1.8 V, 2.5 V, and 3.3 V supply options assist integration with processors and memory operating at different voltage levels. The 144-pin TQFP package provides enough external connectivity for multi-function boards while retaining a deterministic logic implementation.

🖥️

Board-Level Bus Arbitration

The LC4128V-5T144C is appropriate for central bus arbitration where several masters, peripherals, or memory components require deterministic access control. The 128 macro cells can implement priority encoding, request and grant logic, timeout handling, and status decoding, while the 144-pin package supports the required control and bus signals. Its fast timing characteristics help minimize arbitration delay. Designers should use the family pin table to assign shared pins, configure the required I/O standards, and confirm that every connected bus voltage falls within the selected operating configuration.

סיכום מוצרים מומלצים

LC4128V-27T144C Lower-speed family member for cost-sensitive control logic בשימוש ב-: Industrial Automation Control, Data Acquisition and Measurement Control LC4128V-5T144I Same-family option with an industrial temperature designation בשימוש ב-: Industrial Automation Control, Data Acquisition and Measurement Control LC4128V-5TN144C Tray-packaged -5 family configuration בשימוש ב-: Telecommunications Interface Consolidation, Consumer Electronics Feature Control LC4128V-10T144C Alternative timing grade for less critical interface paths בשימוש ב-: Telecommunications Interface Consolidation, Board-Level Bus Arbitration LC4128V-4T144C Pin-compatible family member for noncritical logic בשימוש ב-: Embedded System Glue Logic, Consumer Electronics Feature Control LC4128V-7T144C Same-footprint timing option for additional sourcing flexibility בשימוש ב-: Embedded System Glue Logic, Board-Level Bus Arbitration
What are the key specifications of LC4128V-5T144C that engineers should know?
The LC4128V-5T144C is a 128-macro-cell, in-system-programmable CPLD with 380 MHz maximum operating frequency, 2.5 ns propagation delay, and a 144-pin TQFP package. According to the Lattice Semiconductor LC4128V datasheet, the device supports 3.3 V, 2.5 V, and 1.8 V supply configurations and includes as many as four programmable global clock inputs. Distributor documentation identifies the -5 grade with 227 MHz operating performance, making the distinction between timing grade, maximum frequency, and application operating point important during design selection.
Where can I download the LC4128V-5T144C datasheet PDF?
The LC4128V-5T144C datasheet is available from the Lattice Semiconductor document link listed on this page and through the linked PDF index. According to the LC4128V family documentation, it covers the 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD family. Use the pin-description table, electrical characteristics, AC timing tables, and configuration sections before assigning the 144 pins or selecting operating conditions.
Where can I find the LC4128V-5T144C pinout?
The LC4128V-5T144C pinout is identified in the Lattice Semiconductor family datasheet under the 144-pin TQFP device information. The package uses a 20 mm by 20 mm body with 0.5 mm lead pitch. Use the pin-description table for exact signal names, power pins, configuration pins, and I/O assignments; do not infer unused locations from the abbreviated distributor pin summary.
What is the LC4128V-5T144C and what is a CPLD?
The LC4128V-5T144C is a 128-macro-cell high-density CPLD from Lattice Semiconductor that combines programmable logic with in-system configuration. A CPLD is a programmable logic device positioned between basic PLDs and FPGAs, providing deterministic timing and persistent configuration with a comparatively direct development flow. The device is suitable for control logic, state machines, bus arbitration, interface translation, and board-level signal consolidation.
Is LC4128V-5T144C suitable for industrial control applications?
The LC4128V-5T144C is suitable for many industrial control applications because it combines 128 macro cells, fast timing, in-system programming, and multiple supply-voltage options. The listed junction-temperature range is 0 °C to 90 °C, so it should not automatically be treated as an extended-temperature industrial component. Confirm the final operating-temperature grade, I/O tolerances, and system requirements before using it in temperature-critical equipment.
What can replace the LC4128V-5T144C?
The LC4128V-5T144C can be replaced most directly by another LC4128V device in the 144-pin TQFP package when its timing grade, temperature grade, supply configuration, and pin assignments remain acceptable. The LC4128V-5T144I offers the same nominal timing designation with an industrial temperature option, while LC4128V-7T144C, LC4128V-10T144C, and LC4128V-4T144C change the timing-grade tradeoff. Verify the complete datasheet parameters and pin table for every substitution.
Is LC4128V-5T144C the same as LC4128V-5TN144C?
The LC4128V-5T144C and LC4128V-5TN144C identify the same 144-pin TQFP LC4128V configuration in different packaging notation, with the N suffix associated with tray presentation in distributor listings. The -5 timing grade and electrical family remain the same, so the board footprint is unchanged. Procurement should nevertheless confirm the package drawing, pinout, temperature grade, and shipping format against the exact manufacturer ordering code.
LC4128V-5T144C vs LC4128V-7T144C: which is better for timing-critical logic?
The LC4128V-5T144C is the better starting point for timing-critical logic because the -5 designation is the faster of these two timing grades. According to the Lattice Semiconductor family documentation, both devices use the same 144-pin TQFP architecture and support the same core family characteristics. The LC4128V-7T144C may be considered when timing margin is sufficient and another grade is needed, but its timing limits must be checked against the actual clock and path requirements.
When should I choose LC4128V-5T144C over another CPLD speed grade?
Choose the LC4128V-5T144C when the design benefits from the -5 timing grade and does not require a separately qualified extended-temperature option. It provides 128 macro cells, 2.5 ns propagation delay, and up to 380 MHz maximum operating frequency within a 144-pin TQFP package. Select a slower grade only after static timing analysis confirms adequate setup and hold margin across all operating conditions.
Where can I buy LC4128V-5T144C and check current lead time?
Use the Request a Quote form on this page to request LC4128V-5T144C availability, current lead time, order quantity, and shipment conditions. The product is a catalog CPLD in a 144-pin TQFP tray package, but current inventory and production allocation can change. Submit the required quantity and target date so the quote can reflect the exact MPN and packaging requirement.
What is the price of LC4128V-5T144C?
Current LC4128V-5T144C pricing is not stated in the product listing because commercial terms may change with quantity, availability, and sourcing conditions. Use the Request a Quote form on this page for a current unit-price quotation for the exact 144-pin TQFP part. Include the required order quantity, shipment destination, and any date requirement to obtain an actionable quotation.
Is LC4128V-5T144C in stock?
The current stock status of LC4128V-5T144C should be confirmed through the Request a Quote form on this page. Distributor search pages indicate that the exact MPN is cataloged, but a search result by itself does not establish live inventory or a factory allocation. Request the quantity and target date required for your production plan to obtain a current availability response.
What is the lead time for LC4128V-5T144C?
The lead time for LC4128V-5T144C depends on current manufacturer and channel availability, so use the Request a Quote form on this page to request a date for the required quantity. The part is supplied in a tray package according to product documentation. Include your requested delivery date and any acceptable alternatives to help assess whether an exact-MPN allocation can meet the schedule.
What are the best drop-in replacements for LC4128V-5T144C?
The closest drop-in alternatives are LC4128V family members with the same 144-pin TQFP footprint, including LC4128V-5T144I, LC4128V-4T144C, LC4128V-7T144C, and LC4128V-10T144C. Their key differences are timing grade or temperature grade rather than package geometry. Confirm voltage compatibility, configuration behavior, I/O standards, and timing margins before replacement because pin-to-pin geometry alone does not guarantee timing equivalence.
What Lattice Semiconductor equivalent is available for LC4128V-5T144C?
Lattice Semiconductor LC4128V-5T144I is the most direct family alternative for LC4128V-5T144C because it retains the -5 timing designation and 144-pin TQFP footprint while offering an industrial temperature option. Other LC4128V timing grades provide pin-compatible alternatives with different performance characteristics. The cross-reference information identifies no verified cross-manufacturer drop-in equivalent, so an FPGA or another CPLD family should not be described as a drop-in replacement without a complete pin and tool compatibility review.
How is the LC4128V-5T144C programmed?
The LC4128V-5T144C is configured through its in-system-programmable interface using a compatible Lattice design flow and programming cable or configuration mechanism. According to the Lattice Semiconductor family documentation, the device stores its configuration for operation after programming. During hardware design, follow the manufacturer configuration-circuit example for the selected supply voltage and account for the documented startup and JTAG or serial configuration behavior.

נתוני עזר הנדסיים עבור LC4128V-5T144C — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LC4128V-5T144C when a 128-macro-cell CPLD with a 144-pin TQFP footprint, 2.5 ns propagation delay, and -5 timing grade is required. It is a strong fit for deterministic control, bus arbitration, protocol conversion, and embedded glue logic where in-system programmability and multiple supply options matter. Select LC4128V-5T144I when the same electrical timing grade is needed with an industrial temperature designation. Consider LC4128V-4T144C or LC4128V-7T144C only when their timing limits satisfy the design and a broader sourcing option is useful. LC4128V-10T144C is appropriate for less critical paths where a slower timing grade is acceptable. LC4128V-5TN144C provides the same -5 electrical configuration in tray packaging. For every replacement, verify the pin table, configuration interface, voltage domain, I/O standards, timing analysis, and temperature requirements rather than relying on package matching alone.

השוואה עם חלופות

פרמטר מוצר זה LC4128V-5T144I LC4128V-4T144C LC4128V-7T144C LC4128V-10T144C LC4128V-5TN144C
Package TQFP-144 TQFP-144 TQFP-144 TQFP-144 TQFP-144 TQFP-144
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Timing Grade -5 -5 -4 -7 -10 -5

מבדילים עיקריים

  • Faster timing grade than the nearby LC4128V-7T144C alternative (לעומתLC4128V-7T144C)
  • Retains the same -5 timing grade in an industrial temperature designation (לעומתLC4128V-5T144I)
  • Uses a 144-pin TQFP package with 64 listed user I/O (לעומתLC4128V-4T144C)
  • Supports three named supply-voltage configurations (לעומתLC4128V-10T144C)

הערות תכנון

Configure the LC4128V-5T144C for the voltage domain required by the board and follow the manufacturer configuration-circuit example for that supply option. The family supports 1.8 V, 2.5 V, and 3.3 V operation, but mixed-voltage I/O and configuration connections still require careful level verification. Place core, I/O, and configuration supply decoupling capacitors close to their associated pins, and confirm the permitted voltage combinations and power-up sequence in the family datasheet before routing the board.

Keep the 144-pin TQFP escape routes short enough to preserve the timing needed by the -5 grade, especially for clock, global clock, and high-fanout control paths. Maintain continuous ground references under the device and use a solid plane rather than fragmented copper where return paths are required. Account for the 0.5 mm lead pitch during fanout and assembly review. Use the manufacturer package drawing and pin table as the controlling geometry for land patterns and exposed routing areas.

Treat clock distribution as a dedicated layout task. Route clocks to the global clock inputs with short, direct paths, avoid unnecessary stubs, and keep them away from switching-node and high-current return paths. Although the family provides programmable global clock inputs, static timing analysis must still include the actual clock network and any external routing delay. For external interfaces, validate setup and hold margins at the slowest supported process, voltage, and temperature corner rather than relying only on the 2.5 ns propagation-delay figure.

Do not confuse the 380 MHz maximum operating-frequency specification, the -5 timing-grade designation, and the 227 MHz operating figure listed for this MPN. These describe different parts of the device timing characterization. Before substitution, also verify the exact pin table, temperature grade, supply configuration, and configuration interface. A same-footprint replacement can still fail timing or board operation if these four items are not matched.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN. Obtain the current manufacturer product or quality declaration before treating the device as compliant or qualified.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

lc4128v datasheet LC4128V-5T144C datasheet LC4128V-5T144C datasheet pdf LC4128V-5T144C pinout LC4128V-5T144C 144 TQFP LC4128V-5T144C 128 macro cells LC4128V-5T144C 227MHz LC4128V-5T144C 3.3V LC4128V-5T144C replacement LC4128V-5T144C equivalent LC4128V-5T144C vs LC4128V-7T144C LC4128V-5T144C application circuit LC4128V-5T144C price Lattice LC4128V-5T144C LC4128V-5T144C in system programmable CPLD

רכיבים ומונחים קשורים

Lattice Semiconductor LC4128V-5T144C LC4128V-5T144I LC4128V-4T144C LC4128V-7T144C LC4128V-10T144C LC4128V-5TN144C CPLD complex programmable logic device programmable logic device FPGA ispMACH 4000V SuperFAST in-system programming TQFP-144 TQFP package family surface-mount package SMD 128 macro cells 380 MHz maximum operating frequency 2.5 ns propagation delay 1.8 V power supply 2.5 V power supply 3.3 V power supply industrial automation telecommunications equipment bus arbitration global clock input
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר