Texas Instruments

LM258ADRG4 - Dual 30V 700kHz Op Amp | Texas Instruments

Teilenummer: LM258ADRG4 ✓ Aktiv
±1.5 V to ±16 V Vdss 2 nA Id 8-pin SOIC (D) Package Internal Speed
MOQ: 1 |

LM258ADRG4 Übersicht

The Texas Instruments LM258ADRG4 is a dual general-purpose operational amplifier with a 700 kHz gain-bandwidth product, 0.3 V/µs slew rate, 3 mV typical input offset voltage, and operation across a -25°C to 85°C temperature range. Each amplifier supports supply voltages from ±1.5 V to ±16 V, and the device is packaged in an 8-pin SOIC (D). The LM258ADRG4 suffix identifies the tape-and-reel ordering option.

An operational amplifier is an analog amplifier that uses very high open-loop gain to amplify the difference between two input voltages. The LM258A belongs to the operational-amplifier hierarchy, which includes general-purpose amplifiers, precision amplifiers, instrumentation amplifiers, and comparators. Its two independently compensated channels can implement buffer, gain, summing, active-filter, transducer, and feedback-control circuits from a single or split power supply.

The headline features are 700 kHz bandwidth, 0.3 V/µs slew rate, and ±1.5 V to ±16 V operating range. Typical input offset voltage is 3 mV, while typical input offset current is 2 nA and typical input bias current is 15 nA. The common-mode input range includes ground, making the device useful for circuits that process low-level signals close to the negative supply rail. Internal frequency compensation removes the need for an external compensation network.

Internally, the LM258A uses two frequency-compensated amplifier sections optimized for general-purpose signal conditioning. Its moderate bandwidth supports audio and control applications without requiring the speed or precision of a dedicated high-voltage amplifier. The architecture is intended for broad supply-voltage operation, useful in industrial equipment powered from unregulated rails and in split-supply analog circuits. The maximum-rated differential input range is 32 V, subject to the device's absolute maximum conditions.

Typical applications include low-level sensor signal conditioning, active filtering, audio preamplification, relay and actuator drive interfaces, power-supply feedback, and dual-channel industrial control loops. Using one package for two channels can also reduce board area when both channels require similar common-mode and supply characteristics. The operating-temperature grade supports commercial and industrial ambient conditions rather than the full automotive temperature range.

Design should preserve adequate input and output voltage headroom, account for offset when sensing near ground, and place input-referenced error sources close to the amplifier. Decoupling capacitors should be placed directly across the supply pins, while sensitive feedback nodes require short traces and careful grounding. Verify source and sink current capability against the intended load because a wide supply range alone does not guarantee adequate output-current margin.

This page combines the Texas Instruments product specifications, package and pin information, sourcing guidance, engineering design notes, and a pin-compatible comparison with other dual operational amplifiers. It is intended to accelerate component selection, PCB planning, and replacement assessment for engineers working with the LM258ADRG4 in 8-pin SOIC designs.

Drop-in-Alternativen für LM258ADRG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM258ADRG4 (gleiche Bauform und Footprint) – abweichend in Package, Slew Rate, Amplifier Type, Common-Mode Input Range, Gain-Bandwidth Product.

STMicroelectronics
Package: 8-pin SOIC
Slew Rate: 0.6 V/us
Amplifier Type: Dual low-power operational amplifier
Vergleichen mit LM258ADRG4 →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: General Purpose Operational Amplifier
Common-Mode Input Range: Extends to ground (V-)
Vergleichen mit LM258ADRG4 →
STMicroelectronics
Package: SOIC-8 (SO-8)
Slew Rate: 0.6 V/µs
Gain-Bandwidth Product: 1.1 MHz
Vergleichen mit LM258ADRG4 →

LM358DR

✅ Drop-In
Texas Instruments
📦 8-pin SOIC (D)
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

Preis auf Anfrage

Datenblatt ansehen →

LM358DT

✅ Drop-In
STMicroelectronics
📦 8-pin SOIC (D)
2 · 3 V to 32 V · ±1.5 V to ±16 V · 350 µA (typical) · 2 mV (typical) · 45 nA (typical) · 1.1 MHz · 0.6 V/µs

✓ Auf Lager

$0.0509 / Stück

Datenblatt ansehen →

LM258DT

✅ Drop-In
STMicroelectronics
📦 8-pin SOIC (D)
Dual low-power operational amplifier · 2 amplifiers · 2 circuits · 3 V to 30 V · 1.1 MHz · 0.6 V/us · 100 dB · 500 uA

Preis auf Anfrage

Datenblatt ansehen →

LM258ADRG4 Grenzwerte & elektrische Eigenschaften

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 700 kHz
Slew Rate 0.3 V/µs
Supply Voltage Range ±1.5 V to ±16 V
Maximum Total Supply Voltage 32 V
Typical Input Offset Voltage 3 mV
Typical Input Offset Current 2 nA
Typical Input Bias Current 15 nA
Typical Supply Current 0.7 mA
Common-Mode Input Range Includes ground
Differential Input Voltage Range 32 V
Betriebstemperaturbereich -25°C to 85°C
Gehäuse 8-pin SOIC (D)
Package Width 3.90 mm
Montageart Surface mount
Frequency Compensation Internal

LM258ADRG4 Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT1 — Output of amplifier channel 1
Pin 2 -IN1 — Inverting input of amplifier channel 1
Pin 3 +IN1 — Non-inverting input of amplifier channel 1
Pin 4 V− — Negative supply or ground connection
Pin 5 +IN2 — Non-inverting input of amplifier channel 2
Pin 6 -IN2 — Inverting input of amplifier channel 2
Pin 7 OUT2 — Output of amplifier channel 2
Pin 8 V+ — Positive supply connection

Typische Anwendungen

LM258ADRG4 ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Active Audio Filtering, Power-Supply Feedback Control, Actuator and Relay Drive, Portable Instrumentation Front End, DC Motor and Valve Position Control.

🏭

Industrial Sensor Signal Conditioning

The LM258ADRG4 is suitable for amplifying low-level transducer outputs in industrial monitoring circuits because its common-mode input range includes ground and its supply capability reaches ±16 V. Each channel can provide voltage gain around 700 kHz or less, making the amplifier useful for temperature, pressure, and position sensors that require signal amplification before conversion or control. A typical implementation uses the non-inverting input as the sensor input and applies feedback from the output to the inverting input. Keep the sensor return and amplifier ground on the same reference network to prevent ground differences from appearing as input error. With a 3 mV typical input offset voltage, the design is more appropriate for signals well above the millivolt level or for applications where offset can be calibrated at the system level.

🎧

Active Audio Filtering

The LM258ADRG4 can implement active low-pass or band-pass sections around audio-band signals because its 700 kHz gain-bandwidth product and 0.3 V/µs slew rate provide useful bandwidth beyond the base-audio range. Two independently usable channels allow a stereo filter or a second-order filter to be distributed across one IC. RC components around each amplifier determine the filter response, so their tolerances and the amplifier’s 3 mV typical offset directly influence signal integrity. Confirm the output can remain within the required swing at the selected supply voltage. For low-level microphone signals, the common-mode range including ground is useful, but input bias current through the source impedance can create input-referred voltage error that should be included in the noise budget.

⚡

Power-Supply Feedback Control

The LM258ADRG4 can amplify the error voltage in a linear regulator feedback loop, and its wide operating range of ±1.5 V to ±16 V supports laboratory and industrial supply designs. In a typical topology, one amplifier senses a divided output voltage and drives a feedback element or error amplifier stage. The 700 kHz gain-bandwidth product can respond to loop dynamics above baseband while the 0.3 V/µs slew rate limits how quickly the output can follow error corrections. Compensation values must be calculated with the actual pass device and load because amplifier bandwidth alone does not establish loop stability. The -25°C to 85°C operating range also allows operation across commercial and industrial ambient conditions, subject to the complete system’s thermal and accuracy requirements.

🔧

Actuator and Relay Drive

The LM258ADRG4 can serve as the error amplifier in relay, solenoid, or actuator-control loops where the feedback network determines the commanded output level. Its 700 kHz gain-bandwidth product provides useful response margin, while the wide ±16 V supply capability accommodates higher-voltage control systems when the output current remains within the amplifier’s limits. The output stage must not be treated as a general power driver; use a suitable transistor when the load requires current beyond the op-amp output capability. Keep feedback routing short and place the output-transistor drive network so switching transients do not couple into the sensitive input node. The amplifier’s 3 mV typical input offset voltage becomes less significant when the loop gain and system resolution are high enough to reject it.

📱

Portable Instrumentation Front End

The two channels of the LM258ADRG4 are useful for portable instrumentation that requires buffering or modest gain close to a sensor. Operation from a single supply is possible because the common-mode input range includes ground, while the 0.7 mA typical supply current helps limit consumption in compact systems. A dual package can reduce the component count when buffering a reference and conditioning a measurement channel. Designers should still account for the 15 nA typical input bias current and 2 nA typical input offset current, particularly with high-impedance sensors. Verify battery-voltage variation against the ±1.5 V minimum supply requirement, and use decoupling capacitors close to pins 4 and 8 to keep supply noise from coupling into the measurement path.

⚡

DC Motor and Valve Position Control

The LM258ADRG4 can form an error amplifier in a position-control or current-feedback loop for small DC actuators. Its 700 kHz gain-bandwidth product and 0.3 V/µs slew rate provide useful loop dynamics, while the two amplifier channels can handle related signal tasks when their grounding and loading remain compatible. The op-amp should generally drive a separate power transistor rather than the motor or valve coil directly. Account for the amplifier’s 3 mV typical offset in the position-error budget, and ensure that the control loop remains stable across the expected supply voltage and load. If the circuit is exposed to motor switching noise, keep power-current paths separate from input and feedback traces and provide local supply bypassing at the package pins.

What are the key specifications of LM258ADRG4 that engineers should know?
The LM258ADRG4 is a dual general-purpose operational amplifier rated for 700 kHz gain-bandwidth product, 0.3 V/µs slew rate, and supply voltages from ±1.5 V to ±16 V. It provides two frequency-compensated channels in an 8-pin SOIC package, with a -25°C to 85°C operating-temperature range. According to the Texas Instruments LM258A product page, typical input offset voltage is 3 mV, making it suitable for general signal conditioning rather than precision instrumentation.
Where can I download the LM258ADRG4 datasheet PDF?
The official LM258ADRG4 documentation is available through the Texas Instruments LM258A product page and the LM258ADRG4 part-details listing. The manufacturer identifies the device as a dual, 30 V, 700 kHz operational amplifier with 3 mV offset voltage in an 8-pin SOIC package. Use the manufacturer documentation for the complete electrical characteristics, absolute-maximum limits, application information, and exact pin diagram.
Where can I find the LM258ADRG4 pinout?
The LM258ADRG4 uses the standard 8-pin dual operational-amplifier SOIC arrangement. Pins 3 and 5 are the non-inverting inputs, pins 2 and 6 are the inverting inputs, pins 1 and 7 are the outputs, pin 8 connects to the positive supply, and pin 4 connects to the negative or ground supply. Confirm the orientation and pin numbering against the pin-description table in the Texas Instruments LM258A datasheet before assigning PCB tracks.
Is LM258ADRG4 suitable for single-supply sensor signal conditioning?
Yes, LM258ADRG4 can operate from a single supply within its ±1.5 V to ±16 V capability, and its common-mode input range includes ground. This makes it appropriate for conditioning sensor outputs near the lower supply rail. The 3 mV typical input offset voltage must be considered when the sensed level is small, while the 700 kHz bandwidth provides more than enough response for many low-frequency industrial sensors.
What is the difference between LM258ADRG4 and LM358DR?
The principal documented difference is speed: LM358DR is associated with a 1 MHz gain-bandwidth product, while LM258ADRG4 is rated at 700 kHz. Both use an 8-pin SOIC package and a dual general-purpose operational-amplifier arrangement, but pin compatibility and common-mode behavior must still be checked against each manufacturer’s datasheet. LM258ADRG4 provides 2% lower rated bandwidth than LM358DR.
LM258ADRG4 vs LM358DT - which is better for a low-frequency analog design?
Choose based on the required bandwidth, supply limits, temperature grade, and exact electrical limits rather than package name alone. LM258ADRG4 is specified at 700 kHz gain-bandwidth product and a 3 mV typical input offset voltage, while LM358DT is a different manufacturer’s 8-pin SOIC dual amplifier family. Both can serve low-frequency designs, but LM258ADRG4 is preferable when its -25°C to 85°C grade and original manufacturer support fit the product.
When should I choose LM258ADRG4 over LM358DT?
Choose LM258ADRG4 when you want a dual general-purpose amplifier with a 700 kHz gain-bandwidth product, 0.3 V/µs slew rate, and operation over -25°C to 85°C in an 8-pin SOIC package. LM358DT may suit designs requiring the distinct electrical limits of STMicroelectronics’ LM358 family. The final choice should follow the application’s supply voltage, input common-mode range, output swing, noise, offset, and qualification requirements.
When should I choose LM258ADRG4 instead of LM258DT?
Choose LM258ADRG4 when your design specifically requires the Texas Instruments LM258A electrical characterization, supported temperature range, and 8-pin SOIC pin arrangement. LM258DT is an STMicroelectronics alternative with a similar dual-amplifier role and SOIC footprint, but it is not automatically interchangeable in every operating condition. Compare offset, bias current, supply current, output swing, common-mode limits, and absolute-maximum ratings before substitution.
What can replace LM258ADRG4?
LM358DR, LM358DT, and LM258DT are potential 8-pin SOIC replacements for LM258ADRG4, but each must be checked for electrical and qualification differences. The closest functional choice depends on required bandwidth, offset voltage, input bias current, common-mode range, supply limits, and operating temperature. Do not treat a matching package as proof that every operating condition is identical.
Is LM258ADRG4 pin-compatible with LM358DT?
LM258ADRG4 and LM358DT both use an 8-pin SOIC package and the conventional dual operational-amplifier arrangement, making LM358DT a candidate for footprint-compatible redesigns. The substitution is not automatically performance-identical: LM258ADRG4 has a 700 kHz rated gain-bandwidth product and 3 mV typical offset, while LM358DT has its own manufacturer-specific limits. Verify the pin description and operating requirements before approving a replacement.
What is the best cross-brand equivalent for LM258ADRG4?
LM358DT is the clearest cross-brand candidate identified for an 8-pin SOIC, dual general-purpose operational amplifier. It offers the same broad functional architecture and package format, while allowing a design to evaluate a different manufacturer’s supply chain. LM258DT is another possible dual-op-amp comparison candidate. Final equivalence depends on electrical limits, temperature grade, sourcing requirements, and qualification rather than package appearance alone.
Can LM358DR replace LM258ADRG4 in an existing PCB?
LM358DR can be considered for an existing 8-pin SOIC footprint because it is a dual general-purpose operational amplifier in the same package family. Its nominal 1 MHz bandwidth is about 43% higher than the 700 kHz rating of LM258ADRG4, so bandwidth is not the limiting concern. Other parameters, including offset, bias current, common-mode range, output swing, supply current, and temperature limits, must be compared before substitution.
How much thermal dissipation does LM258ADRG4 produce?
Estimated: using the typical 0.7 mA supply current and a 5 V single supply, the device dissipates approximately 0.0035 W under a lightly loaded amplifier condition. This estimate uses supply current 0.7 mA and supply voltage 5 V and excludes external load dissipation. The 8-pin SOIC offers adequate copper area for normal operation, but system-level self-heating should be checked at the highest expected load.
Is LM258ADRG4 currently active?
The Texas Instruments product page lists the LM258ADRG4 as a current orderable part with an 8-pin SOIC package and a -25°C to 85°C operating range. The LM258A family remains established for industrial and general-purpose analog designs. Lifecycle status can change, so confirm current orderability and package availability through the Request a Quote form on this page for the intended production build.
Where to buy LM258ADRG4 online and what are its price and lead time?
Use the Request a Quote form on this page to request LM258ADRG4 pricing, stock confirmation, minimum order quantity, and current lead time. The part is an 8-pin SOIC tape-and-reel orderable device, and a product listing identifies immediate shipment capability. Current commercial terms can vary with quantity and market conditions, so request a quotation rather than relying on a static price or unconfirmed availability statement.

Technische Referenzdaten für LM258ADRG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM258ADRG4 when the design needs two general-purpose amplifiers in an 8-pin SOIC, a 700 kHz gain-bandwidth product, 0.3 V/µs slew rate, and a common-mode input range that includes ground. Its 3 mV typical offset makes it appropriate for moderate-level rather than precision millivolt signals, while the -25°C to 85°C rating supports commercial and industrial ambient conditions. LM358DR is the logical same-manufacturer alternative when its approximately 1 MHz bandwidth and other electrical limits provide a better system fit. Consider LM358DT or LM258DT when evaluating a cross-manufacturer dual op amp in the same SOIC footprint, but check offset, bias current, common-mode range, output swing, supply current, temperature grade, and qualification. For new precision or high-speed designs, avoid choosing this part solely from its package: the relatively high offset and moderate bandwidth may require an amplifier family with lower error and faster response.

Vergleich mit Alternativen

Parameter Dieses Produkt LM358DR LM358DT LM258DT
Brand Texas Instruments Texas Instruments STMicroelectronics STMicroelectronics
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Amplifier Configuration Dual general-purpose operational amplifier Dual general-purpose operational amplifier Dual operational amplifier Dual operational amplifier

Wichtigste Unterscheidungsmerkmale

  • Defined 700 kHz bandwidth and 0.3 V/µs slew rate (vs. LM358DR)
  • Common-mode operation down to ground (vs. LM358DT)
  • Single 8-pin SOIC package provides two amplifiers (vs. LM258DT)
  • Specified commercial and industrial ambient range (vs. LM358DR)

Designhinweise

Place the supply-bypass capacitor directly between pins 8 and 4, with the ground end connected to the quiet ground plane. Keep the two input and two output traces short, and route feedback components close to their associated amplifier pins. The inverting input is sensitive to parasitic capacitance, so avoid routing it beside high-impedance input or switching-node traces. A solid ground plane and short return paths reduce common-mode pickup and maintain predictable operation across both channels.

Do not assume that the common-mode input range includes ground under every output and supply condition. Check the input common-mode range and output swing curves in the manufacturer datasheet against the actual signal range. When operating from a single supply, leave sufficient output headroom for the load. Also account for 3 mV typical input offset, 15 nA typical input bias current, and 2 nA typical input offset current when resolving small signals.

Estimated: with a 0.7 mA typical supply current and a 5 V single supply, LM258ADRG4 power dissipation is approximately 0.0035 W. This estimate uses 0.7 mA supply current and 5 V supply voltage and excludes load-current dissipation in external circuitry. At ±16 V, supply-current dissipation rises in proportion to the supply voltage, so thermal review should use the highest operating supply and actual measured or worst-case supply current.

When one channel performs low-level sensing and the other handles a faster control function, retain a common ground reference but avoid sharing sensitive feedback nodes. The two channels are independent, yet poor grounding can couple output transients into an adjacent input. Use separate passive filtering only where its effect on phase margin is acceptable, and verify that added RC networks do not unintentionally reduce stability in a feedback loop.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The product is an operational amplifier rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or the Request a Quote form.

Ähnliche Suchanfragen

LM258ADRG4 datasheet LM258ADRG4 pinout LM258ADRG4 datasheet pdf LM258ADRG4 equivalent LM258ADRG4 replacement LM258ADRG4 cross reference LM258ADRG4 vs LM358DR LM258ADRG4 vs LM358DT Texas Instruments LM258ADRG4 LM258ADRG4 price LM258ADRG4 stock LM258ADRG4 8-SOIC amplifier LM258ADRG4 700kHz op amp LM258ADRG4 sensor signal conditioning LM258ADRG4 active filter circuit

Verwandte Bauteile & Begriffe

Texas Instruments LM258ADRG4 LM258A LM358DR LM358DT LM258DT operational amplifier dual operational amplifier general-purpose amplifier analog amplifier semiconductor gain-bandwidth product slew rate input offset voltage input bias current input offset current common-mode input range frequency compensation single-supply operation split-supply operation 8-pin SOIC SOIC package surface mount industrial sensor signal conditioning active filtering
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen