Texas Instruments

LM324KNSR - Quad 30-V 1.2-MHz Op Amp | Texas Instruments

Teilenummer: LM324KNSR ✓ Aktiv
30 V Vdss 14-pin SOIC (NS, SOP) Package
MOQ: 1 |

LM324KNSR Übersicht

The Texas Instruments LM324KNSR is a quadruple general-purpose operational amplifier with four independent, high-gain, frequency-compensated amplifiers, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth performance, and improved 2 kV ESD protection in a 14-pin SOIC (NS) package. Each amplifier can operate from a single supply or split supply, making the device useful in general-purpose analog signal-processing circuits.

An operational amplifier, or op amp, is a high-gain differential amplifier that compares two input voltages and drives its output to represent their difference. Within the broader semiconductor hierarchy, an op amp is an analog amplifier IC used for signal conditioning, buffering, amplification, filtering, feedback control, and voltage-level conversion. The LM324KNSR integrates four such amplifiers into one package, reducing board area compared with four separate single or dual amplifier packages.

The principal device ratings include operation from a single or split supply, a 30 V maximum supply voltage, 1.2 MHz gain-bandwidth bandwidth, and 2 kV improved ESD protection. The manufacturer identifies LM324KNSR as a standard general-purpose amplifier with four circuits and a 14-pin SOP package. Its specified operating-temperature range is 0 to 70 °C, making it appropriate for commercial equipment where an extended industrial temperature rating is not required.

The LM324K family is designed for broad compatibility with established LM324-type amplifier boards. Because the four amplifiers share a common package but operate independently, separate signal paths can be implemented within one device. The frequency-compensated architecture simplifies closed-loop use when the amplifier is configured as a standard inverting or non-inverting gain stage, although loop stability and bandwidth still depend on the external feedback network and load.

Typical uses include audio preamplification, sensor signal conditioning, current-to-voltage conversion, active filtering, voltage comparison, and general instrumentation. The four-amplifier arrangement is especially useful when a design needs several channels of similar gain and bandwidth, such as multiple sensor inputs or a balanced differential stage followed by additional gain stages.

PCB layout should keep input and feedback connections short and route them away from high-current switching nodes. Decoupling capacitors should be placed close to the power pins, while the unused amplifier in any unused channel must be configured according to the Texas Instruments LM324K datasheet rather than left floating. The 14-pin SOIC footprint simplifies replacement on compatible LM324NS-style boards.

This product record combines manufacturer specifications, package and ordering information, drop-in candidate analysis, comparison parameters, and practical PCB guidance. It helps engineers evaluate the LM324KNSR for general-purpose analog designs and identify whether a same-footprint LM324-family device is appropriate when supply voltage, temperature grade, or sourcing requirements change.

Drop-in-Alternativen für LM324KNSR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM324KNSR (gleiche Bauform und Footprint) – abweichend in Package, Supply Configuration, Input Offset Voltage, Maximum Supply Voltage, Amplifier Type.

Texas Instruments
Package: 14-SO
Input Offset Voltage: 2 mV maximum
Maximum Supply Voltage: 26 V
Vergleichen mit LM324KNSR →
Texas Instruments
Package: 14-pin SOIC (D)
Supply Configuration: Single supply or split supply
Input Offset Voltage: 3 mV
Vergleichen mit LM324KNSR →
Texas Instruments
Package: 14-SO
Supply Configuration: Single supply or dual supply
Vergleichen mit LM324KNSR →
Texas Instruments
Package: 14-pin SOIC
Supply Configuration: Single supply or split supply
Input Offset Voltage: Plus or minus 2 mV maximum for BA versions at 25 C
Vergleichen mit LM324KNSR →
Texas Instruments
Package: SOIC-14 (D), 14 pins
Supply Configuration: Single supply or split supply
Input Offset Voltage: 3 mV
Vergleichen mit LM324KNSR →
Texas Instruments
Package: 14-SO, 0.209 inch (5.30 mm) width
Vergleichen mit LM324KNSR →

LM324ANSR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-SOIC (NS)
Quad general-purpose operational amplifier · 4 independent sections · 14-SO · Surface mount · Single supply or dual supply · 0.8 mA typical · Includes ground · Internal frequency compensation

Preis auf Anfrage

Datenblatt ansehen →

LM324ADR

✅ Drop-In
Texas Instruments
📦 14-SOIC
4 circuits · 30 V · 1.2 MHz · 3 mV · Single supply or split supply · Internally compensated · True differential inputs · 14 pins

Preis auf Anfrage

Datenblatt ansehen →

LM324DR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-SOIC
Quad general-purpose operational amplifier · 4 · Four independent high-gain frequency-compensated operational amplifiers · 3 V to 36 V for B versions · Plus or minus 2 mV maximum for BA versions at 25 C · 2 kV HBM for B, BA, and K versions · Internal RF and EMI filter for B and BA versions · Single supply or split supply

Preis auf Anfrage

Datenblatt ansehen →

LM2902NSR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 14-SOIC (NS)
General-purpose operational amplifier · 4 circuits · 26 V · 1.2 MHz · 2 mV maximum · 14-SO · 14 pins · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

LM324KNS

✅ Drop-In
📦 14-SOIC (NS)
Same LM324K electrical family, 30 V rating, 1.2 MHz bandwidth, and 14-pin NS footprint; the ordering suffix differs from LM324KNSR and requires confirmation of the required shipping format.

📋 Referenzalternative (nicht im Katalog)

LM324KNSR Grenzwerte & elektrische Eigenschaften

Amplifier Count 4 independent amplifiers
Product Type Quad general-purpose operational amplifier
Maximum Supply Voltage 30 V
Supply Configuration Single or split supply
Gain-Bandwidth Product 1.2 MHz
Improved ESD Protection 2 kV
Betriebstemperaturbereich 0 °C to 70 °C
Gehäuse 14-pin SOIC (NS, SOP)
Pin-Anzahl 14 pins
Montageart Surface mount
Shipping Form NSR ordering code

LM324KNSR 14-pin soic (ns, sop) Pinbelegungsleitfaden

Pinbelegung für LM324KNSR (14-pin soic (ns, sop)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM324KNSR im 14-pin soic (ns, sop)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM324KNSR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM324KNSR ist geeignet für 6 Anwendungs: General-Purpose Sensor Signal Conditioning, Audio Preamplification, Active Filtering and Control Loops, Power Supply Current Measurement, Instrumentation Buffering, Interface and Level Conditioning.

🧩

General-Purpose Sensor Signal Conditioning

The LM324KNSR fits four-channel sensor conditioning because it integrates four independent, frequency-compensated amplifiers with 1.2 MHz gain-bandwidth bandwidth in one 14-pin SOIC package. Each amplifier can scale a low-level sensor signal or drive a feedback network before conversion. The 30 V maximum supply rating supports 5 V, 12 V, and other supply arrangements, while the 0 to 70 °C range targets commercial equipment. Place supply-decoupling capacitors near the package and keep high-impedance input traces short to reduce noise pickup and imbalance error.

🎧

Audio Preamplification

The LM324KNSR can provide the general-purpose gain stages used around audio sources because each amplifier is frequency compensated and supports single or split supplies. The 1.2 MHz gain-bandwidth bandwidth is sufficient for many low-to-moderate-bandwidth preamplifier and mixer stages, while four amplifiers allow balanced input handling or two stereo channels in one package. The 2 kV improved ESD rating also benefits equipment exposed to electrostatic discharge. Designers should verify output swing and bandwidth at the intended signal amplitude instead of assuming the full 30 V supply can appear at the output.

🏭

Active Filtering and Control Loops

The four channels in LM324KNSR are useful for active filter and feedback-control implementations where several related amplifier stages share the same supply. The 1.2 MHz gain-bandwidth bandwidth provides a defined performance point for evaluating closed-loop filter response and control-loop compensation. Because the amplifiers are independent, separate filters or a multistage servo loop can be implemented in one 14-pin SOIC. Use the Texas Instruments LM324K gain and phase characteristics to select resistor and capacitor values, and keep sensitive summing nodes away from power-supply and switching traces.

⚡

Power Supply Current Measurement

LM324KNSR can form the transimpedance and buffering stages of a current-measurement system because it combines four independent amplifiers with a 30 V maximum supply rating. A shunt amplifier, differential sensing stage, output filter, and monitor amplifier can share one package when their signal ranges and bandwidth requirements suit the 1.2 MHz device. The commercial 0 to 70 °C range is appropriate for room-temperature test equipment. Confirm input offset, input bias current, common-mode range, and output swing at the actual shunt voltage before relying on accuracy at microampere or milliampere levels.

📟

Instrumentation Buffering

The LM324KNSR is suitable for instrumentation buffering when the design needs several high-input-impedance buffer or gain functions rather than a single precision amplifier. Its four independent channels can isolate sensor outputs, buffer reference voltages, and amplify intermediate signals within one 14-pin SOIC package. The 30 V rating is useful for powered laboratory and industrial control boards, while the 1.2 MHz bandwidth supports many low-frequency measurement paths. The 2 kV improved ESD protection is relevant for bench equipment, although system-level grounding and connector protection still determine real transient immunity.

🌐

Interface and Level Conditioning

LM324KNSR can condition logic-level, analog-reference, or low-speed communications signals when a board needs several op-amp channels with common supply connections. Single- or split-supply operation supports both grounded and offset signal paths, and the four-amplifier configuration can implement buffering, comparison, gain, and active filtering in parallel. The 1.2 MHz bandwidth is more than adequate for many low-speed interface tasks but should be checked against edge-rate requirements. Route outputs away from fast digital nets and use local supply bypassing to maintain predictable behavior in mixed-signal equipment.

What are the key specifications of LM324KNSR that engineers should know?
The LM324KNSR is a four-amplifier general-purpose operational amplifier rated for up to 30 V with 1.2 MHz gain-bandwidth bandwidth and improved 2 kV ESD protection. According to the Texas Instruments LM324K datasheet, the device contains four independent, high-gain, frequency-compensated amplifiers and supports single or split supplies. It is offered in a 14-pin SOIC (NS) package with a 0 to 70 °C operating-temperature range.
Where can I download the LM324KNSR datasheet PDF?
The official LM324K documentation is available through the Texas Instruments LM324K product page, whose datasheet link points to the manufacturer documentation. The LM324KNSR ordering table identifies the part as a 14-pin NS package device. Use that document for the complete electrical characteristics, pin configuration, recommended operating conditions, and application guidance for the exact NS package ordering code.
Where can I find the LM324KNSR pinout and package drawing?
Use the pin-description and package-mechanics sections of the Texas Instruments LM324K datasheet for the definitive LM324KNSR pin assignment and 14-pin SOIC drawing. The manufacturer ordering information identifies the NS package with 14 pins. Assign PCB tracks and verify continuity against the selected package variant before fabrication, particularly when substituting another LM324-family amplifier with a related ordering suffix.
Is LM324KNSR suitable for single-supply operation?
Yes. The LM324KNSR is designed to operate from either a single supply or split supplies, allowing use in 5 V, 12 V, or other suitable single-rail systems as long as the total supply and input/output limits are respected. According to the Texas Instruments LM324K datasheet, its maximum supply rating is 30 V. Input common-mode and output-swing limits still require review for the selected rail voltages.
What is the gain-bandwidth bandwidth of LM324KNSR?
The LM324KNSR has a 1.2 MHz gain-bandwidth bandwidth, as specified by Texas Instruments for the LM324K family. This bandwidth supports general-purpose closed-loop amplification at moderate frequencies. Actual closed-loop bandwidth depends on the selected noise gain, load, output amplitude, and loop stability requirements, so the datasheet gain and phase plots should be checked for the final circuit.
What is the difference between LM324KNSR and LM324ADR?
Both devices are Texas Instruments quad general-purpose operational amplifiers that can use the same 14-pin SOIC footprint, but they are not identical ordering variants. The LM324KNSR is identified as the improved-ESD LM324K device with a 30 V, 1.2 MHz specification, while LM324ADR belongs to the LM324A family. Check the two manufacturer datasheets for input offset, temperature range, supply range, and ordering-code differences before treating either part as a substitute.
When should I choose LM324KNSR over LM2902NSR?
Choose LM324KNSR when the design specifically calls for the LM324K family, its 30 V rating, 1.2 MHz bandwidth, improved 2 kV ESD protection, or 0 to 70 °C commercial temperature range. Choose LM2902NSR only after confirming that its electrical limits, temperature grade, supply range, offset voltage, and exact NS-package pinout satisfy the circuit requirements. Both are four-amplifier SOIC devices, but ordering-family differences can matter in production.
What is the best drop-in replacement for LM324KNSR?
The closest drop-in candidates are four-amplifier, 14-pin SOIC devices with the same supply and signal-path architecture, such as LM324ANSR, LM324ADR, LM324DR, LM2902NSR, and LM324KNS. The correct replacement depends on whether the original design depends on the LM324K 0 to 70 °C grade, the 30 V maximum supply, 1.2 MHz bandwidth, offset voltage, and exact pin functions. Verify every electrical limit in the manufacturer datasheet.
Can LM324ANSR replace LM324KNSR without changing the PCB?
LM324ANSR uses the same NS 14-pin SOIC footprint, so an existing LM324KNSR layout can physically accept it. Electrical compatibility still requires verification of supply range, input offset, input bias current, output swing, common-mode range, bandwidth, and operating temperature. LM324ANSR is therefore a board-compatible candidate, not a guarantee that every LM324KNSR application can use it without retuning.
What can replace LM324KNSR in a general-purpose amplifier board?
A general-purpose replacement should provide four amplifiers in the 14-pin NS SOIC footprint and maintain compatible input, output, supply, and ground connections. LM324ANSR, LM324ADR, LM324DR, LM2902NSR, and LM324KNS are candidates for evaluation. Choose based on verified supply voltage, temperature rating, offset, bandwidth, ESD capability, and lifecycle requirements rather than package appearance alone.
Is LM324KNSR the same as LM324KNS?
LM324KNS and LM324KNSR belong to the same LM324K ordering family and use the NS 14-pin SOIC footprint, but the ordering suffixes can identify different shipping or catalog configurations. For functional replacement, confirm the electrical specifications and the required delivery format. Do not substitute solely because the abbreviated family names resemble each other; use the complete manufacturer ordering table.
Where can I buy LM324KNSR online?
Use the Request a Quote form on this page to ask for LM324KNSR availability, current lead time, and an order quotation. The form lets the quote team confirm the exact NSR ordering code, quantity, and delivery format without relying on a potentially stale catalog listing. For technical documentation, use the official Texas Instruments LM324K product page.
What is the price of LM324KNSR?
Use the Request a Quote form on this page for the current LM324KNSR quotation. The commercial quote reflects quantity, exact ordering suffix, inventory status, and requested delivery format. Engineers should also review the structured pricing panel on this page for the latest available pricing information and the manufacturer part-details page for ordering guidance.
What is the lead time for LM324KNSR?
Request the current lead time through the Request a Quote form on this page. The quotation process can confirm available stock, minimum order quantity, and production scheduling for the exact LM324KNSR ordering code. For long-term design planning, request a scheduled allocation and periodic availability review so procurement can align component delivery with the intended build schedule.
Is LM324KNSR in stock?
Check current availability through the Request a Quote form on this page because stock levels can change with manufacturer inventory and order volume. Include the required quantity, LM324KNSR ordering suffix, delivery location, and target date in the request. The manufacturer ordering page remains the authoritative source for the part number, package, and commercial ordering information.
How should LM324KNSR be used as a general-purpose op amp?
Use LM324KNSR as a closed-loop voltage amplifier with negative feedback, commonly in an inverting or non-inverting configuration. According to the Texas Instruments LM324K datasheet, each amplifier is frequency compensated for straightforward general-purpose use, but stable operation still depends on feedback-loop design and load. Keep feedback traces short, place decoupling capacitors near the supply pins, and avoid routing inputs beside switching-node traces.

Technische Referenzdaten für LM324KNSR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM324KNSR when the design requires four general-purpose amplifiers in a 14-pin NS SOIC package, a 30 V maximum supply rating, 1.2 MHz gain-bandwidth bandwidth, improved 2 kV ESD protection, and a 0 to 70 °C commercial operating range. LM324KNS is the closest same-family choice when its ordering and shipping configuration meet the build plan. Consider LM324ANSR or LM324ADR for compatible LM324A-family boards, but verify offset voltage, temperature range, common-mode limits, and supply range before release. LM324DR may fit an older LM324-based design after checking its family-specific electrical limits. LM2902NSR shares the four-channel NS footprint but represents a different ordering family with different temperature and component-level characteristics. For every alternative, perform a pin-by-pin and worst-case electrical comparison rather than relying only on package compatibility.

Vergleich mit Alternativen

Parameter Dieses Produkt LM324ANSR LM324ADR LM324DR LM2902NSR LM324KNS
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC (NS) 14-SOIC (NS) 14-SOIC 14-SOIC 14-SOIC (NS) 14-SOIC (NS)
Amplifier Count 4 independent amplifiers 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers 4 amplifiers
Supply Configuration Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply
Special Feature Improved ESD protection LM324A family LM324A family Legacy LM324 family LM2902 family Improved ESD protection

Wichtigste Unterscheidungsmerkmale

  • Improved electrostatic-discharge protection in the selected LM324K family (vs. LM324ADR)
  • Commercial-temperature ordering profile (vs. LM324DR)
  • Same LM324K family with direct NS-footprint reuse (vs. LM324KNS)
  • Four independent amplifiers in one package (vs. LM2902NSR)

Designhinweise

Place the supply-bypass capacitors immediately beside pins 4 and 11, with short, low-inductance connections to the ground plane. Keep each amplifier's noninverting input, inverting input, and feedback components close together and away from switching nodes. The four amplifiers share supply pins, so a noisy load on one channel can couple through the common supply network; isolate high-current outputs and use local decoupling when necessary.

Treat high-impedance input traces as sensitive nodes because input offset and bias current establish the practical accuracy of a general-purpose amplifier stage. Minimize leakage from PCB contamination, flux residue, humidity, and nearby high-impedance sources. Where the 1.2 MHz device operates near its bandwidth limit, keep feedback loops compact and verify both magnitude and phase margin using the gain-bandwidth and output-capability information in the LM324K datasheet.

Do not assume that the 30 V maximum supply rating permits a 30 V output or unrestricted input range. The valid common-mode input range and output swing depend on the selected supply and output conditions. Likewise, configure every unused amplifier as a stable stage rather than allowing its input to float. Before replacing LM324KNSR with LM324ANSR, LM324ADR, LM324DR, LM2902NSR, or LM324KNS, verify the complete operating limits and pin description for the exact ordering suffix.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit LM324KNSR compliance declarations or AEC-Q100 qualification were identified. A commercial 0 to 70 °C operating-temperature range is not, by itself, evidence of AEC-Q100 qualification.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

LM324KNSR datasheet LM324KNSR pinout LM324KNSR datasheet pdf LM324KNSR replacement LM324KNSR equivalent LM324KNSR cross reference LM324KNSR vs LM324ADR LM324KNSR vs LM2902NSR LM324K 30V 1.2MHz op amp LM324KNSR application circuit LM324KNSR price LM324KNSR stock

Verwandte Bauteile & Begriffe

Texas Instruments LM324KNSR LM324K LM324ANSR LM324ADR LM324DR LM2902NSR LM324KNS operational amplifier op amp quad operational amplifier analog amplifier IC single-supply amplifier split-supply amplifier gain-bandwidth product 1.2 MHz bandwidth input offset voltage input bias current ESD protection 2 kV ESD protection 14-pin SOIC NS package surface-mount package signal conditioning active filtering
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen