MCF52211CAE80 - 80MHz 32-Bit MCU with USB | NXP
Teilenummer: MCF52211CAE80 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $13.1356 | $13,14 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MCF52211CAE80 Übersicht
A microcontroller is a semiconductor system that integrates a processor core, memory, peripherals, and I/O into one device. The ColdFire core provides the execution engine, while flash stores firmware and RAM supports working data. In the device hierarchy, this part is a 32-bit MCU, part of the broader ColdFire family and the semiconductor category. It is intended for embedded products that need local control, serial connectivity, and USB device or host capability.
The principal verified features are an 80 MHz maximum clock, a 32-bit data bus and instruction architecture, 128 KB organized as 128K x 8 flash, a 3.3 V supply indication in distributor data, and USB OTG integration. The family interface mix simplifies connection to sensors, external memory, displays, and industrial peripherals. The 64-LQFP package also provides a conventional leaded footprint that can simplify inspection and prototype assembly compared with a fine-pitch array package.
The ColdFire architecture is designed for embedded control rather than desktop computing. Its peripherals allow firmware to manage USB traffic alongside serial communication without requiring separate interface devices when the application requirements match. However, the verified material does not provide detailed RAM capacity, voltage limits, clock-tree configuration, flash timing, or package pin assignments, so those values must be confirmed in the manufacturer data sheet before a hardware release.
Typical uses include USB-to-serial equipment, industrial data loggers, building-control endpoints, device programmers, and embedded gateways that need both control firmware and multiple serial interfaces. USB OTG can support a peripheral-to-host role when properly designed, while the UART, SPI, and I²C interfaces support sensors, storage, and board-level expansion.
The primary design consideration is lifecycle planning. The NXP product page identifies the part as End of Life, so new production designs should begin a migration review rather than treating it as a long-term active choice. Engineers should verify current stock, firmware support, package compatibility, and any approved successor with NXP before committing to a new design. Existing production equipment may still benefit from careful sourcing and an obsolescence plan.
This page consolidates verified manufacturer and distributor facts, available pricing, lifecycle status, interface applications, and verified replacement information. It does not invent an electrical specification, pin definition, or substitute when the supplied evidence does not establish one.
Drop-in-Alternativen für MCF52211CAE80 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MCF52211CAE80 (gleiche Bauform und Footprint) – abweichend in Package, Maximum Clock Frequency, Flash Memory, Mounting Type, Core.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MCF52211CVM66
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$7.05 / Stück
Datenblatt ansehen →MCF52212CAE50
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$6.74 / Stück
Datenblatt ansehen →MCF52221CAE66
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MCF52230CAF60
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MCF52232CAF50
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MCF52211CAE80 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit microcontroller (MCU) |
| Processor Core | ColdFire V2 |
| Processor Architecture | RISC |
| Maximale Taktfrequenz | 80 MHz |
| Datenbusbreite | 32 bit |
| Flash Memory | 128 KB (128K x 8) |
| Nominal Supply Voltage | 3.3 V |
| Integrated USB | USB On-The-Go (OTG) |
| UART Count | Up to 3 |
| SPI Interface Count | 1 |
| I2C Interface Count | 2 |
| Gehäuse | 64-LQFP, 10 mm x 10 mm |
| Montageart | Surface mount |
| Processor Series | MCF522x |
| Microcontroller Family | MCF5221x |
| Lebenszyklusstatus | End of Life |
MCF52211CAE80 64-lqfp, 10 mm x 10 mm Pinbelegungsleitfaden
Pinbelegung für MCF52211CAE80 (64-lqfp, 10 mm x 10 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MCF52211CAE80.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MCF52211CAE80 ist geeignet für 6 Anwendungs: USB-to-Serial Adapter, Industrial Data Logger, Building-Control Endpoint, USB Device Controller, Programmable Serial Interface Hub, Legacy Embedded Equipment Maintenance.
USB-to-Serial Adapter
The MCF52211CAE80 fits a USB-to-serial adapter because its MCF5221x family combines USB OTG with up to three UARTs, while the 80 MHz ColdFire V2 core provides dedicated embedded-control performance. Firmware can enumerate as a USB device and route traffic to external UART peripherals without requiring a separate USB controller. The 128 KB flash provides a defined firmware-storage capacity. Before layout, verify the target's USB transceiver pins, connector data-path requirements, power design, and bootloader arrangement in the full manufacturer documentation. Because this MCU is End of Life, this application is most defensible for maintenance of existing USB products rather than a new long-lived platform.
Empfohlen
Industrial Data Logger
The MCF52211CAE80 is appropriate for an industrial data logger that must collect sensor information locally and transfer it over USB or serial links. Its up-to-three-UART configuration can connect multiple sensors or radio modules, while one SPI interface and two I²C interfaces support flash storage, converters, and low-speed peripherals. The 80 MHz 32-bit ColdFire V2 core supplies real-time control and data-management capability. Designers must add suitable transceiver protection, isolation, and level translation for industrial cabling. The End of Life designation requires an obsolescence plan and verified long-term sourcing for new deployments.
Empfohlen
Building-Control Endpoint
The MCF52211CAE80 can serve as a building-control endpoint when a design needs local logic plus several wired interfaces. Three UART-capable channels may link to room controllers or service interfaces, while I²C supports sensors and small peripheral devices and SPI supports higher-speed local components. USB OTG can simplify commissioning or maintenance connectivity. A production design must address electrical isolation, surge protection, grounding, and environmental limits according to the complete product specifications. Since the supplied data does not state the operating-temperature range or formal industrial qualification, both must be confirmed before deployment.
Empfohlen
USB Device Controller
The integrated USB OTG capability makes the MCF52211CAE80 a logical fit for embedded USB device controllers that also need multiple serial interfaces. The 80 MHz core can manage protocol handling and device tasks, while up to three UARTs provide downstream connectivity. Designers can use the SPI interface for external storage or a fast peripheral and I²C for configuration and monitoring. The verified records establish interface counts but not electrical operating limits, so USB transceiver, power, clock, and layout decisions require the full data sheet and board-level validation. End of Life status argues for using it primarily in an established design.
Empfohlen
Programmable Serial Interface Hub
The MCF52211CAE80 supports a serial-interface hub architecture because it combines USB OTG, as many as three UARTs, one SPI interface, and two I²C interfaces in one microcontroller. Firmware can present a common USB command interface while bridging data to connected sensors, storage, or service ports. The 128 KB flash capacity provides a known storage budget for firmware and configuration logic. Practical implementations must verify pin multiplexing, interrupt priorities, buffer sizing, and USB host or device roles from authoritative documentation. Because package pin data is absent from the supplied records, this is an application fit assessment, not a released reference design.
Empfohlen
Legacy Embedded Equipment Maintenance
The MCF52211CAE80 is most practical today in maintenance and controlled continuity of legacy equipment because the official NXP page marks it End of Life. Its known 80 MHz ColdFire V2 core, 128 KB flash, USB OTG, and three-UART capability let technicians replace the original device when it is electrically and software compatible with the existing board. Procurement should prioritize traceable inventory, exact suffix matching, date-code review, and documented inspection. For long-term support, create a software-freeze record, preserve the existing toolchain, and evaluate a redesign that avoids extending the life of this MCU beyond justified availability.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MCF52211CAE80 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MCF52211CVM66 | MCF52212CAE50 | MCF52221CAE66 | MCF52230CAF60 | MCF52232CAF50 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP, 10 mm x 10 mm | 64-LQFP classification; exact pitch and dimensions not verified | 64-LQFP classification; exact pitch and dimensions not verified | 64-LQFP classification; exact pitch and dimensions not verified | 64-LQFP classification; exact pitch and dimensions not verified | 64-LQFP classification; exact pitch and dimensions not verified |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Wichtigste Unterscheidungsmerkmale
- Known connectivity integration for the target design (vs. MCF52110CAE80)
- Higher verified maximum clock rate than the retrieved competing part record (vs. MCF52110CAE80)
- Broader serial-interface allocation (vs. MCF52211CAE80 versus an unspecified 32-bit 128 KB MCU)
Designhinweise
Do not treat a matching 64-pin count or similar MCF522 family name as proof of interchangeability. The replacement must be checked pin by pin for power, ground, reset, clocks, USB, reset-boot straps, and every multiplexed signal. In addition, confirm electrical limits, flash organization, peripheral mapping, and software support. The supplied search results do not contain a verified cross-reference, so any substitution should first be assembled and tested as a controlled engineering-change prototype.
Use the manufacturer's complete pin and power-connection tables before placing bypass capacitors or routing the 3.3 V supply. The verified data confirms a 3.3 V indication but does not identify allowable voltage tolerance, current demand, internal regulator behavior, or power-pin grouping. Keep supply return paths short and use a quiet ground strategy around USB and serial interfaces. Validate startup current, peripheral loading, and USB bus-power requirements on hardware rather than inferring them from the nominal supply voltage.
Reserve the footprint only after checking the exact 64-LQFP pinout and package drawing. Place decoupling and clock-support components close to their associated pins, and keep USB differential routing controlled according to the complete transceiver and connector implementation. Because the supplied evidence does not identify USB PHY pins or clock requirements, do not freeze signal routing from a family overview. Review the board against the authoritative pin table, recommended application circuit, and USB implementation guidance before release.
Plan a lifecycle risk review before committing new production. The official NXP page identifies MCF52211CAE80 as End of Life, so availability may depend on residual channel inventory rather than a long-term product schedule. For an existing product, retain exact ordering information, archive the toolchain and firmware, document approved substitutions, and purchase traceable stock with date codes. For a new design, document why an End of Life MCU is justified and identify a tested redesign path.
Compliance-Informationen
The supplied product, distributor, and datasheet-index records do not establish environmental declarations or automotive qualification. NXP identifies the product as End of Life; obtain current manufacturer compliance documentation before making compliance claims.