Analog Devices

LT1056ACH - 6.5MHz, 16V/µs JFET Op Amp | Analog Devices

Teilenummer: LT1056ACH ✓ Aktiv
50 µV Vdss 40 pA Id 8-pin TO-5 metal can Package
MOQ: 1 |

LT1056ACH Übersicht

The Analog Devices LT1056ACH is a precision, high-speed JFET-input operational amplifier featuring a 6.5 MHz gain-bandwidth product, a 16 V/µs slew rate, and typically 50 µV offset voltage. The LT1056ACH is packaged in an 8-pin TO-5 metal-can package. Its combination of low offset, low drift, and very low input bias current makes it suitable for precision signal-conditioning and measurement systems that also require wideband transient response.

A JFET-input operational amplifier is an analog amplifier whose differential input stage uses junction field-effect transistors. The JFET input architecture provides very low input bias current while preserving the low-noise, high-input-impedance behavior required by sensors, transducers, and laboratory instrumentation. Within the broader semiconductor hierarchy, the LT1056ACH belongs to the operational-amplifier family within amplifier and signal-conditioning integrated circuits.

The LT1056ACH combines a guaranteed maximum offset voltage of 150 µV with typical offset voltage of 50 µV. Its typical input offset drift is 1.2 µV/°C, while the guaranteed maximum drift is 4 µV/°C. Typical input bias current is 40 pA at 70°C and 500 pA at 125°C. These characteristics reduce dc error in high-impedance instrumentation and help preserve signal fidelity when source impedance creates meaningful input offset voltage.

The simultaneous availability of 16 V/µs slew rate and 6.5 MHz gain-bandwidth product distinguishes the LT1056 family from slower precision amplifiers. Large-signal slewing improves recovery from overload and supports small-signal bandwidth in feedback configurations. The offset and drift specifications complement that speed, creating an amplifier suitable for laboratory buffers, precision current-to-voltage converters, active filters, and low-level sensor interfaces.

Typical uses include photodiode and other photodetector preamplifiers, precision bridge instrumentation, low-level signal buffers, waveform amplifiers, and active analog filters. In each circuit, the low input bias current limits dc loading, while the 16 V/µs slew rate helps preserve the shape of rapidly changing signals. Designers should still verify input and output voltage limits, gain-bandwidth behavior, load stability, and supply requirements for the intended configuration.

A primary design consideration is feedback stability. High-speed amplifiers can require source, load, and compensation choices that differ from general-purpose precision op amps. Keep input and feedback routing short, use the manufacturer-recommended application topology, and evaluate output loading before increasing gain. The metal-can package also requires adequate clearance from conductive structures and proper handling to avoid mechanical damage.

This page consolidates manufacturer specifications, lifecycle information, sourcing guidance, replacement constraints, and application-focused design notes for engineers evaluating the LT1056ACH. It distinguishes verified drop-in candidates from merely similar amplifiers and emphasizes the combination of precision input behavior, 6.5 MHz bandwidth, and 16 V/µs slew rate that defines the device.

Drop-in-Alternativen für LT1056ACH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LT1056ACH (gleiche Bauform und Footprint) – abweichend in Package, Amplifier Type, Mounting Type, Slew Rate, Typical Input Offset Voltage.

Analog Devices
Package: TO-5 metal-can package
Amplifier Type: Single operational amplifier
Mounting Type: Through-hole
Vergleichen mit LT1056ACH →
Analog Devices
Package: 8-pin TO-5, round, wire-lead
Mounting Type: Through-hole
Slew Rate: 16 V/us
Vergleichen mit LT1056ACH →

LT1056CH

✅ Drop-In
Analog Devices
📦 8-pin TO-5
Precision JFET-input operational amplifier · 1 circuit · 6.5 MHz · 16 V/us · 50 uV · 150 uV · 1.2 uV/degree C · 4 uV/degree C maximum

Preis auf Anfrage

Datenblatt ansehen →

LT1056ACH Grenzwerte & elektrische Eigenschaften

Amplifier Type Precision JFET-input operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 6.5 MHz
Slew Rate 16 V/µs
Typical Input Offset Voltage 50 µV
Maximum Guaranteed Input Offset Voltage 150 µV
Typical Input Offset Drift 1.2 µV/°C
Maximum Guaranteed Input Offset Drift 4 µV/°C
Typical Bias Current at 70°C 40 pA
Typical Bias Current at 125°C 500 pA
Guaranteed Bias Current at 70°C 150 pA maximum
Guaranteed Bias Current at 125°C 2.5 nA maximum
Gehäuse 8-pin TO-5 metal can
Montageart Through-hole metal can

LT1056ACH 8-pin to-5 metal can Pinbelegungsleitfaden

Pinbelegung für LT1056ACH (8-pin to-5 metal can-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LT1056ACH im 8-pin to-5 metal can-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LT1056ACH.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LT1056ACH ist geeignet für 6 Anwendungs: Photodiode Preamplifier, Precision Bridge Instrumentation, Laboratory Signal Buffer, Low-Level Active Filter, Precision Current-to-Voltage Conversion, Waveform and Fast Analog Amplifier.

📷

Photodiode Preamplifier

The LT1056ACH fits a photodiode preamplifier because its typical input bias current is only 40 pA at 70°C, reducing errors caused by the photodiode and feedback network. The 6.5 MHz gain-bandwidth product supports higher-bandwidth transimpedance designs, while the 16 V/µs slew rate improves response to rapid photocurrent changes. Designers should calculate feedback resistance, capacitance, noise gain, and stability together because a very high-value feedback resistor combined with stray capacitance can make the complete amplifier oscillate.

🏭

Precision Bridge Instrumentation

For strain-gauge and resistive-bridge measurements, the LT1056ACH provides a 150 µV maximum guaranteed input offset voltage and input bias current of 150 pA maximum at 70°C. These characteristics limit errors caused by amplifier input current and offset in high-gain bridge amplifiers. Its 4 µV/°C maximum guaranteed drift also helps control temperature-dependent error. The practical design task is to balance noise gain against bandwidth, because the 6.5 MHz gain-bandwidth product can amplify high-frequency noise and produce ringing in a poorly compensated circuit.

🧪

Laboratory Signal Buffer

The LT1056ACH works well as a laboratory buffer for sources with high output impedance or low-level analog signals. Its low input bias current reduces loading of the source, and the 150 µV maximum offset specification helps preserve small dc signals. The 16 V/µs slew rate provides better large-signal behavior than a purely low-frequency precision amplifier, making the device useful for buffer-before-ADC designs. Input and output range checks remain essential because precision offset performance does not extend the legal signal range.

📡

Low-Level Active Filter

The LT1056ACH can implement a precision low-level active filter when both dc accuracy and moderate bandwidth are required. Its typical offset voltage of 50 µV and maximum guaranteed drift of 4 µV/°C help stabilize the passband, while the 6.5 MHz gain-bandwidth product gives designers room to realize higher-order filters. Designers should calculate each closed-loop response from the selected noise gain rather than assuming that the op-amp bandwidth directly sets filter bandwidth, and they should verify phase margin with the actual load.

⚡

Precision Current-to-Voltage Conversion

The LT1056ACH is suitable for precision current-to-voltage conversion because low input bias current reduces current error through the source and feedback paths. With a 50 µV typical offset and 4 µV/°C maximum guaranteed drift, it can preserve accuracy in slow but demanding measurements. The 16 V/µs slew rate also allows the output to follow faster current changes than many precision-only amplifiers. Feedback resistor tolerance, input protection, output loading, and bandwidth should be evaluated before using the TO-5 device in a compact measurement module.

📺

Waveform and Fast Analog Amplifier

The LT1056ACH is appropriate for amplifying waveform signals that require faster slew response than ordinary precision op amps provide. Its 16 V/µs slew rate and 6.5 MHz gain-bandwidth product allow useful small-signal bandwidth and quicker recovery from overload. The amplifier can therefore serve in pulse, waveform, or active-filter stages where the slower response of a general precision amplifier would distort signal edges. Confirm output-voltage swing, load capability, and stability before scaling the gain or driving a lower-impedance load.

What is the operating voltage range of the LT1056ACH?
The LT1056ACH is a precision JFET-input operational amplifier specified for the LT1055/LT1056 family, but its complete supply-voltage limits must be confirmed in the manufacturer datasheet. The verified family specifications establish a 6.5 MHz gain-bandwidth product, 16 V/µs slew rate, and very low input bias current. Use the manufacturer pin-description and electrical-characteristics tables before selecting power rails, bypassing capacitors, or planning a replacement.
What are the key specifications of LT1056ACH that engineers should know?
The LT1056ACH combines a 6.5 MHz gain-bandwidth product, 16 V/µs slew rate, 150 µV maximum guaranteed input offset voltage, and 4 µV/°C maximum guaranteed input offset drift. Its typical offset voltage is 50 µV, while typical bias current is 40 pA at 70°C and 500 pA at 125°C. According to the Analog Devices LT1055/LT1056 manufacturer datasheet, the device is a single amplifier in an 8-pin TO-5 metal-can package.
Where can I download the LT1056ACH datasheet PDF?
The official LT1056ACH datasheet is available through the Analog Devices LT1056 product page and the manufacturer-hosted 10556fd.pdf document. The manufacturer page provides the product overview, while the PDF contains the electrical characteristics, pin descriptions, and application information. Use the manufacturer PDF for design sign-off because third-party document mirrors may use different revisions or renderings of the same family data.
Where can I find the LT1056ACH pinout?
The LT1056ACH uses an 8-pin TO-5 metal-can package. The authoritative pin names, numbering, and connection details are shown in the pin-description table of the Analog Devices LT1055/LT1056 manufacturer datasheet. Use that table when assigning offset null, input, supply, output, compensation, and no-connect positions. The package library does not contain a dedicated TO-5 diagram, so the generic package rendering should not be treated as the electrical pinout.
Why is the LT1056ACH suitable for precision instrumentation?
The LT1056ACH suits precision instrumentation because it combines low input bias current with low offset voltage and low thermal drift. Its 150 µV maximum guaranteed offset, 4 µV/°C maximum guaranteed drift, and 150 pA maximum bias current at 70°C reduce errors in high-impedance sensor paths. The 16 V/µs slew rate also allows the amplifier to reproduce fast signals without the long settling behavior associated with many low-speed precision amplifiers.
What can replace the LT1056ACH?
The closest identified replacement is the Analog Devices LT1056CH, which is offered in the same TO-5 package family and uses the same LT1056 amplifier designation. However, suffix, temperature-grade, and qualification differences must be checked in the manufacturer ordering information before substitution. Cross-reference listings indicate that some LT1056 alternatives use a modified circuit and are not automatically pin-to-pin drop-ins, so footprint equivalence alone is insufficient for PCB replacement.
Is the LT1056ACH the same as the LT1056CH?
The LT1056ACH and LT1056CH share the LT1056 functional family and TO-5 package format, but they are not necessarily identical orderable variants. The suffix can encode grade, temperature range, or packaging characteristics, and those differences may matter in an existing design. Compare the manufacturer ordering table, operating temperature limits, and full pin descriptions before treating LT1056CH as a drop-in replacement for LT1056ACH.
LT1056ACH versus LT1056CH: which is better for a legacy precision circuit?
The LT1056ACH is preferable when the original bill of materials specifies that exact suffix and its temperature grade, qualification, or availability status satisfies the application. The LT1056CH may be preferable when the replacement designation is explicitly approved for the same operating environment. Neither should be selected solely from the shared LT1056 name: review the ordering table, electrical limits, and pin descriptions because a cross-reference listing notes that functionally similar alternatives may have modified circuits.
When should I choose the LT1056ACH instead of a slower precision op amp?
Choose the LT1056ACH when the signal path needs both low input error and rapid large-signal response. Its 16 V/µs slew rate and 6.5 MHz gain-bandwidth product are substantially more useful than offset specifications alone when signals change quickly or when overload recovery matters. A slower precision amplifier may be adequate for static measurements, but the LT1056ACH provides additional bandwidth without abandoning its low-bias-current JFET input stage.
Is the LT1056ACH suitable for photodiode and high-impedance sensor interfaces?
The LT1056ACH is well suited to photodiode and high-impedance sensor interfaces because its typical input bias current is 40 pA at 70°C and 500 pA at 125°C. Low input current reduces errors introduced by source impedance and helps preserve the signal from weakly biased transducers. The 6.5 MHz gain-bandwidth product and 16 V/µs slew rate can also support wideband transimpedance stages, although the completed circuit must be checked for stability.
How much input offset voltage does the LT1056ACH have?
The LT1056ACH has a typical input offset voltage of 50 µV and a maximum guaranteed input offset voltage of 150 µV. The Analog Devices manufacturer datasheet also specifies typical offset drift of 1.2 µV/°C and a guaranteed maximum of 4 µV/°C. These values are important when the amplifier follows a high-gain stage or biases a precision transducer, because offset and drift can dominate the measurement error.
What are the power and thermal considerations for the LT1056ACH?
The LT1056ACH must be operated within its manufacturer-specified supply and package limits, which are defined in the LT1055/LT1056 datasheet. Because it uses an 8-pin TO-5 metal can rather than a modern surface-mount package, copper-area and through-hole thermal performance can differ from exposed-pad parts. Keep the can mechanically secure, maintain clearance from conductive objects, and evaluate junction temperature using the actual PCB airflow and copper conditions.
Where can I buy the LT1056ACH and check its lead time?
Use the Request a Quote form on this page to request LT1056ACH availability, current lead time, order quantity, and price for the exact 8-pin TO-5 variant. The product should be quoted under the complete LT1056ACH suffix so that the correct grade and package are selected. Stock and lead time can change, so confirm the current manufacturer and channel status before committing the component to a production schedule.
Is the LT1056ACH currently active?
The LT1056ACH is currently treated as an active catalog part for this product record because Analog Devices maintains a dedicated LT1056 product page and manufacturer datasheet. The product page is the best source for formal lifecycle status and ordering options. If a long-running program requires continuity assurance, request a written supply and lifecycle statement for the exact suffix rather than relying only on general family status.
What is the best Analog Devices equivalent for the LT1056ACH?
The best identified Analog Devices-family alternative is the LT1056CH, which shares the LT1056 designation and TO-5 package format and appears in a direct comparison listing for LT1056ACH. It should be treated as a conditional drop-in candidate until its suffix-specific temperature, qualification, and ordering differences are confirmed. The cross-reference search identifies additional candidates but does not name them, so unverified MPNs should not be introduced into a production design.
Does the LT1056ACH support RoHS and REACH compliance?
The RoHS and REACH status must be confirmed for the exact LT1056ACH orderable suffix using the Analog Devices product page and current material-compliance documentation. The legacy TO-5 package and older LT1056 family history mean that generic family assumptions are not sufficient. Use the Request a Quote form when procurement needs a compliance declaration tied to the exact manufacturer part number, rather than relying on an unspecified amplifier-family statement.

Technische Referenzdaten für LT1056ACH – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the LT1056ACH when maintaining the original exact suffix is important and the circuit benefits from very low input bias current, low offset, and moderate high-speed response. Its 6.5 MHz gain-bandwidth product and 16 V/µs slew rate make it more appropriate than a slow precision-only amplifier for waveform, photodiode, and active-filter stages. Consider the LT1056CH when its suffix-specific grade, temperature range, qualification, and lifecycle conditions are acceptable and it provides a more suitable supply option. Do not select a generic precision op amp solely because its input bias current is similar: verify supply voltage, common-mode range, output swing, compensation requirements, noise, offset drift, package geometry, and actual pin assignment. For a PCB replacement, the manufacturer ordering table and datasheet pin descriptions remain the decisive documents.

Vergleich mit Alternativen

Parameter Dieses Produkt LT1056CH
Brand Analog Devices Analog Devices
Package 8-pin TO-5 8-pin TO-5
Amplifier Type Precision JFET-input operational amplifier Precision JFET-input operational amplifier
Number of Circuits 1 circuit 1 circuit
Gain-Bandwidth Product 6.5 MHz 6.5 MHz
Slew Rate 16 V/µs 16 V/µs
Maximum Guaranteed Input Offset Voltage 150 µV 150 µV
Maximum Guaranteed Input Offset Drift 4 µV/°C 4 µV/°C
Typical Bias Current at 70°C 40 pA 40 pA

Wichtigste Unterscheidungsmerkmale

  • Combines precision offset behavior with high-speed response (vs. LT1056CH)
  • Very low input bias current for precision high-impedance circuits (vs. LT1056CH)
  • Low thermal drift supports stable dc measurements (vs. LT1056CH)

Designhinweise

Do not treat every LT1056-family listing as a pin-to-pin substitute. The cross-reference results explicitly warn that some functionally similar alternatives have modified circuits. Compare the complete ordering suffix, pin-description table, operating temperature range, and qualification requirements for LT1056ACH and LT1056CH before replacing the component on an existing board.

The 6.5 MHz gain-bandwidth product and 16 V/µs slew rate require careful feedback-network design. Use the manufacturer's recommended noise-gain topology, keep feedback routing compact, and include a small isolation resistor between the amplifier and capacitive loads when necessary. Verify the closed-loop response with the intended source impedance and load because the maximum small-signal bandwidth does not independently determine closed-loop stability.

Treat the 8-pin TO-5 can as a through-hole precision package. Maintain adequate clearance between the metal can and adjacent conductive components, avoid mechanical stress on the leads, and orient the package according to the manufacturer pin diagram. If a socket is used, verify pin continuity, contact resistance, and thermal behavior; low-bias-current operation is particularly sensitive to contamination and leakage across the board.

Bypass the supply pins with capacitors selected from the manufacturer reference circuit and placed close to the appropriate package pins. Confirm the permitted supply voltage, output swing, input common-mode range, and stability capacitor values in the datasheet before energizing the circuit. Include a controlled startup path if the source impedance or downstream bias network can produce excessive transients during power-up.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Material-compliance declarations were not stated for the exact LT1056ACH suffix. AEC-Q100 is not applicable to this general-purpose precision operational amplifier. Obtain a current manufacturer declaration for the exact orderable part.

Ähnliche Suchanfragen

LT1056ACH datasheet LT1056ACH specifications LT1056ACH pinout LT1056ACH datasheet pdf Analog Devices LT1056ACH LT1056ACH equivalent LT1056ACH replacement LT1056ACH vs LT1056CH LT1056ACH TO-5 amplifier LT1056ACH photodiode amplifier LT1056ACH price LT1056ACH stock LT1056ACH 6.5MHz 16V/us LT1056ACH precision instrumentation

Verwandte Bauteile & Begriffe

Analog Devices LT1056ACH LT1056CH LT1056 LT1055 operational amplifier precision operational amplifier JFET-input operational amplifier amplifier IC signal-conditioning integrated circuit semiconductor gain-bandwidth product slew rate input offset voltage input offset drift input bias current noise gain transimpedance amplifier photodiode preamplifier bridge instrumentation active filter 8-pin TO-5 metal can RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen