LT8614IUDC#PBF - 42V 4A Silent Switcher Buck | Analog Devices
Teilenummer: LT8614IUDC#PBF ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $7.4082 | $7,41 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
LT8614IUDC#PBF Übersicht
A synchronous buck converter is a DC-DC regulator that uses integrated high-side and low-side switches to transfer energy efficiently while reducing output voltage from a higher input rail. The LT8614 belongs to the voltage-regulator hierarchy within power-management ICs and uses Analog Devices Silent Switcher architecture to control EMI emissions during high-frequency operation. Its monolithic construction helps reduce external component count and supports compact converter layouts.
The verified product data identifies operation from 3.4 V to 42 V input, 0.97 V to 41.8 V adjustable output, and up to 4 A output current. Efficiency reaches 96% at 1 MHz and 94% at 2 MHz according to the verified distributor data. Burst Mode operation provides 2.5 µA quiescent current for 12 VIN to 3 V regulation in the cited operating condition, making the device suitable for low-power and battery-influenced systems when the converter is not carrying heavy load.
The SYNC pin supports clock synchronization and selection of Burst Mode or pulse-skipping operation, while TR/SS provides soft-start and tracking functions. These features help control inrush current and coordinate multiple rails in systems where sequencing or load sharing matters. The exposed-pad QFN package supports improved heat transfer when the PCB provides adequate copper area.
Typical uses include industrial 24 V or 36 V rail conversion, telecom and networking equipment, robotics, instrumentation, and compact embedded systems. Its wide input range covers automotive-style transient headroom when designed with appropriate upstream protection, but the verified data does not establish AEC-Q100 qualification for this exact suffix.
For implementation, check the complete datasheet pinout, compensation or voltage-setting details, switch-current limits, and thermal limits against the exact LT8614IUDC#PBF ordering code. Place input and output capacitors close to their corresponding pins, provide a continuous ground path, and use the exposed pad as a thermal interface rather than an isolated copper island.
Drop-in-Alternativen für LT8614IUDC#PBF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
LT8614IUDC#WTRPBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LT8614EUDC#PBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LT8614HUDC#WTRPBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LT8614IUDC#TRPBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
TPS563201
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADP2302
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LT8614IUDC#PBF Grenzwerte & elektrische Eigenschaften
| Eingangsspannungsbereich | 3.4 V to 42 V |
| Ausgangsspannungsbereich | 0.97 V to 41.8 V |
| Maximaler Ausgangsstrom | 4 A |
| Schaltfrequenz | Up to 3 MHz |
| Efficiency at 1 MHz | Up to 96% |
| Efficiency at 2 MHz | Up to 94% |
| Ruhestrom | 2.5 µA in Burst Mode for 12 VIN regulating to 3 V |
| Control Architecture | Silent Switcher synchronous step-down architecture |
| Ausgangskonfiguration | Adjustable single output |
| Synchronization | SYNC pin supports clock synchronization, Burst Mode, and pulse-skipping mode |
| Soft Start and Tracking | Available through TR/SS pin |
| Gehäuse | 20-lead WFQFN with exposed pad, 3 mm x 4 mm |
| Pin-Anzahl | 20 leads including exposed pad |
| Betriebstemperatur | -40°C to 125°C operating junction temperature range |
| Integrated Switches | Yes, monolithic construction with integrated power switches |
| Montageart | Surface Mount |
LT8614IUDC#PBF 20-lead wfqfn with exposed pad, 3 mm x 4 mm Pinbelegungsleitfaden
Pinbelegung für LT8614IUDC#PBF (20-lead wfqfn with exposed pad, 3 mm x 4 mm-Gehäuse). Dieses Leistungsbauteil verfügt über Gate-, Drain- und Source-Anschlüsse. Bei nicht gepolten Gehäusen entnehmen Sie die genaue Ausrichtung von Pin 1 und Footprint-Details dem Herstellerdatenblatt. Typische Anwendungen sind Netzteilentwurf, Motoransteuerung und Lastschaltung.
Keine detaillierten Pinbelegungsdaten verfügbar für LT8614IUDC#PBF.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LT8614IUDC#PBF ist geeignet für 6 Anwendungs: Industrial 24 V Rail Conversion, Telecom and Networking Equipment, Robotics and Embedded Control Systems, Instrumentation and Test Equipment, Automotive Electrical and Battery Systems, Battery-Powered Portable Systems.
Industrial 24 V Rail Conversion
The LT8614IUDC#PBF suits industrial point-of-load conversion from a 24 V nominal rail because its verified input range extends from 3.4 V to 42 V and its adjustable output spans 0.97 V to 41.8 V. Silent Switcher architecture is useful in compact control, instrumentation, and automation equipment where conducted EMI must be controlled. Use the exposed pad as a thermal interface, place input and output capacitors close to their pins, and verify industrial transient and surge requirements upstream.
Empfohlen
Telecom and Networking Equipment
The LT8614IUDC#PBF is a strong candidate for telecom and networking power rails that require efficient conversion at high switching frequency. The verified data cites up to 96% efficiency at 1 MHz and 94% at 2 MHz, helping reduce heat in compact equipment. Silent Switcher architecture minimizes EMI emissions, while the 4 A output rating supports local rails when thermal and inductor limits permit. Validate conducted-emissions margins and system power sequencing during prototype testing.
Empfohlen
Robotics and Embedded Control Systems
The LT8614IUDC#PBF fits robotics and embedded control systems that need a compact 42 V-capable buck stage for motors, sensors, and logic rails. Its adjustable output allows different rail voltages, while integrated switches reduce the external power-stage component count. Silent Switcher architecture is valuable when reducing EMI around control electronics and cable-connected modules. Check ripple at sensitive loads and provide adequate copper around the exposed pad to manage self-heating.
Empfohlen
Instrumentation and Test Equipment
The LT8614IUDC#PBF is appropriate for precision instrumentation rails where switching noise and layout-induced emissions must be controlled. Its high-frequency operation supports smaller magnetics and capacitors in compact instruments, while the adjustable output supports multiple internal voltage levels. The verified 2.5 µA Burst Mode current is useful when the instrument spends time in a low-power state. For analog front ends, measure output ripple, transient response, and conducted emissions on the final board.
Empfohlen
Automotive Electrical and Battery Systems
The LT8614IUDC#PBF can be evaluated for 42 V-class automotive or battery-powered systems because its verified input range reaches 42 V and its synchronous topology supports efficient conversion. Silent Switcher architecture helps control EMI in systems with long wiring harnesses and sensitive electronics. However, the provided data does not confirm AEC-Q100 qualification for this exact I-grade suffix. Verify automotive qualification, load dump, reverse-battery, and transient requirements before production use.
Empfohlen
Battery-Powered Portable Systems
The LT8614IUDC#PBF can serve as a regulated rail in portable or battery-managed equipment when the input voltage remains within its verified 3.4 V to 42 V range. Burst Mode can reduce quiescent current to the cited 2.5 µA condition, which helps conserve energy during light-load periods. The converter’s high-frequency operation reduces passive-component size, but output ripple and efficiency depend strongly on the battery source impedance and selected inductor. Confirm shutdown behavior and load-current requirements in the system.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LT8614IUDC#PBF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LT8614IUDC#WTRPBF | LT8614EUDC#PBF | LT8614HUDC#WTRPBF | TPS563201 | ADP2302 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Analog Devices |
Wichtigste Unterscheidungsmerkmale
- Silent Switcher architecture targets lower EMI than a conventional high-current buck layout (vs. TPS563201)
- High-frequency operation supports compact magnetics and capacitors (vs. ADP2302)
- Wide 42 V input capability for industrial and battery-influenced rails (vs. LM2596)
- Integrated switches and synchronization features reduce external control complexity (vs. LT8614EUDC#PBF)
Designhinweise
Use the official LT8614 datasheet package drawing to place input and output capacitors close to their power terminals and maintain a short, low-loop-area high-current path. The exposed pad should be connected to the recommended ground or thermal structure and tied to adequate PCB copper; do not treat it as an isolated cosmetic pad. Because the part can switch up to 3 MHz, trace inductance and return-current discontinuities can materially affect EMI and transient behavior.
Silent Switcher architecture is intended to reduce EMI, but it does not remove the need for an EMC-focused layout. Keep the switch loop compact, route high-di/dt current through the shortest possible path, use a continuous ground reference, and follow the datasheet guidance for component placement. Validate conducted and radiated emissions with the final enclosure, cable harness, and load. Changing switching frequency or inductor values can alter the EMI profile.
The verified 4 A rating is a headline maximum, not a guarantee of continuous 4 A operation at every output voltage. Check switch conduction and switching losses, inductor copper loss, ambient temperature, exposed-pad copper area, and the PCB thermal resistance. Use the manufacturer’s current-limit and thermal information for design margin, and derate the output current when the converter operates near maximum frequency or in a sealed enclosure.
Do not substitute a generic 42 V, 4 A buck regulator solely because its headline ratings match. Verify pin names and locations, SYNC and TR/SS behavior, compensation or feedback implementation, current-limit response, switch-node layout, and exposed-pad requirements. Also confirm the I-grade suffix and temperature guarantees against the exact datasheet revision before releasing a PCB or placing a production order.
Compliance-Informationen
The verified data does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Automotive-grade wording appears for LT8614HUDC#WTRPBF in cross-reference results, but AEC-Q100 qualification for LT8614IUDC#PBF is not established by the provided sources.
