M1AFS600-1FG484I - Fusion FPGA 600K Gates ARM Cortex-M1 | Microchip
Teilenummer: M1AFS600-1FG484I ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $523.31 | $523,31 |
| 10 | $497.14 | $4.971,40 |
| 100 | $471 | $47.100,00 |
| 500 | $447 | $223.500,00 |
| 1.000 | $425 | $425.000,00 |
M1AFS600-1FG484I Übersicht
An FPGA (Field-Programmable Gate Array) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that the designer configures after manufacturing. The Fusion family sits within the broader hierarchy of programmable logic: FPGA -> programmable logic device (PLD) -> programmable SoC. What distinguishes Fusion is monolithic integration of configurable analog blocks (ADC, comparators, voltage monitors), large flash memory blocks, clock management circuitry (CCCs with PLLs), and flash-based programmable logic on a single die, removing the need for external configuration devices and many discrete analog supervisory components.
Key features of the M1AFS600 variant include 13824 VersaTile logic tiles (each configurable as a 3-input LUT, D flip-flop, or memory), 110592 flip-flops of sequential capacity, integrated 12-bit analog-to-digital conversion via the Fusion analog front end, and the ARM Cortex-M1 soft/hard processor support for embedded control. Because configuration and user data reside in on-chip flash, the device is inherently secure and instant-on at power-up with no external boot PROM.
Technically, the flash-based fabric offers deterministic, single-chip behavior with low static power compared with SRAM FPGAs, and the embedded Cortex-M1 (32-bit, ARMv6-M) lets designers partition control software and hardware accelerators in one device. The 484-FBGA ball grid array provides the 172 I/O for banked voltage standards including LVTTL, LVCMOS, SSTL, HSTL, LVDS, and B-LVDS.
Typical applications include industrial automation control, smart grid and power monitoring (leveraging the analog blocks), aerospace and defense processing, motor control, and test instrumentation.
Design consideration: this specific -FG484I ordering code contains lead and is RoHS non-compliant per distributor data, so verify regulatory fit; the -FGG484I green package variant should be used for RoHS-required builds.
This page synthesizes distributor pricing, drop-in family alternatives, and design guidance not found on the manufacturer product page.
Drop-in-Alternativen für M1AFS600-1FG484I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit M1AFS600-1FG484I (gleiche Bauform und Footprint) – abweichend in Package, Family, RoHS Status, Process Technology, Configuration Memory.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
M1AFS600-FG484I
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →M1AFS600-2FG484I
✅ Drop-In✓ Auf Lager
$97.6 / Stück
Datenblatt ansehen →M1AFS600-1FGG484I
✅ Drop-In✓ Auf Lager
$430 / Stück
Datenblatt ansehen →M7AFS600-1FG484I
✅ Drop-In✓ Auf Lager
$198 / Stück
Datenblatt ansehen →M7AFS600-FG484I
✅ Drop-In✓ Auf Lager
$273.98 / Stück
Datenblatt ansehen →M7AFS600-2FG484I
✅ Drop-In✓ Auf Lager
$272.01 / Stück
Datenblatt ansehen →M1AFS1500-FG484I
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
M1AFS600-1FG484I Grenzwerte & elektrische Eigenschaften
| Family | Fusion (M1 series) |
| System Gates | 600K |
| VersaTile Logic Blocks | 13824 |
| Flip-Flops | 110592 |
| User I/O | 172 |
| Processor Core | ARM Cortex-M1 (32-bit ARMv6-M) |
| Technology | 130nm flash-based CMOS |
| Core Supply Voltage | 1.5 V |
| Gehäuse | 484-ball FBGA (FG484) |
| Analog Features | Configurable analog blocks (ADC, comparators, voltage monitors) |
| Configuration Memory | On-chip flash (instant-on, secure) |
| Clock Management | CCC blocks with integrated PLLs |
| I/O Standards | LVTTL, LVCMOS, SSTL, HSTL, LVDS, B-LVDS |
| RoHS-Status | RoHS Non-Compliant (contains lead) |
| Lead Free Status | Contains Lead |
| Montageart | Surface Mount |
M1AFS600-1FG484I 484-ball fbga (fg484) Pinbelegungsleitfaden
Pinbelegung für M1AFS600-1FG484I (484-ball fbga (fg484)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für M1AFS600-1FG484I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
M1AFS600-1FG484I ist geeignet für 6 Anwendungs: Industrial Automation Control, Smart Grid and Power Monitoring, Aerospace and Defense Processing, Motor Control Drives, Test and Measurement Instrumentation, Medical Diagnostic Equipment.
Industrial Automation Control
The M1AFS600-1FG484I fits industrial automation nodes that combine real-time I/O sequencing with supervisory processing: 13824 VersaTiles implement deterministic state machines and interlocks, while the ARM Cortex-M1 runs protocol stacks such as Modbus or CAN management. With 172 user I/O supporting LVCMOS, SSTL, and LVDS standards, one device can terminate backplane signals, encoder inputs, and drive outputs simultaneously. Because configuration lives in on-chip flash, the FPGA is instant-on at power-up - critical for safety interlocks that must be active before a programmable-boot SRAM FPGA would be ready. The trade-off is fabric speed: at the -1 speed grade, budget timing closure carefully for fast serial interfaces, or select the M1AFS600-2FG484I variant.
Empfohlen
Smart Grid and Power Monitoring
Fusion's monolithic configurable analog front end - ADC, comparators, and voltage monitors - makes the M1AFS600-1FG484I a strong fit for smart-grid meters, relay protection, and power-quality analyzers. The on-chip ADC digitizes rail and sensor voltages without an external converter, while comparators implement overvoltage/undervoltage trip logic in fabric with microsecond response. The Cortex-M1 computes RMS values and communicates over serial links using the 172 I/O in LVDS or LVTTL modes. Flash-based configuration adds security for grid-edge equipment, and the leaded FG484I package suits legacy industrial builds (specify M1AFS600-1FGG484I for RoHS grids). Performance consideration: verify ADC accuracy and reference stability against your metering-class error budget in the Fusion analog datasheet sections.
Empfohlen
Aerospace and Defense Processing
Flash-based Fusion FPGAs are widely used in defense electronics because configuration data is non-volatile, immune to configuration upset from radiation-induced SEU in the way SRAM configuration cells are not, and requires no external boot device that could fail at altitude. The M1AFS600-1FG484I's 600K gates and 110592 flip-flops implement sensor-interface glue logic, and the Cortex-M1 handles housekeeping software. The 484-ball FBGA offers mechanical robustness on vibration-prone platforms. Use the -I industrial temperature variant for extended-temperature programs and confirm screening requirements with your supply chain. Performance consideration: at -1 speed grade, pipeline high-speed interfaces; many defense programs pre-approve -2 parts (M1AFS600-2FG484I) for timing margin.
Empfohlen
Motor Control Drives
The M1AFS600-1FG484I implements complete motor-drive control loops: fabric-based PWM generators at switching frequencies up to hundreds of kHz, quadrature-encoder decoding, and fault-protection comparators via the Fusion analog blocks, with the Cortex-M1 executing the current-loop or field-oriented-control supervisory code. The 172 I/O terminate gate-driver PWM outputs, hall/encoder feedback, and host communication (RS-485/CAN) on one chip. Flash configuration ensures PWM outputs are safely disabled at power-up until firmware releases them - an inherent safety advantage. Performance consideration: the -1 speed grade supports typical drive PWM timing, but closed-loop bandwidth beyond roughly 10 kHz control rate favors the -2 grade for margin.
Empfohlen
Test and Measurement Instrumentation
Bench and modular instruments benefit from the M1AFS600-1FG484I's combination of 600K gates of trigger/timing logic, the Cortex-M1 for command processing, and the analog front end for self-calibration monitoring of internal rails. The 172 I/O in LVDS mode supports differential probe front ends and backplane interfaces (e.g., PXI-style timing buses), while 110592 flip-flops allow deep-tap pattern capture for logic-analysis functions. Because the FPGA is instant-on from flash, instruments power up with their timing state machines loaded immediately, reducing boot time versus SRAM FPGAs that load from external PROM. Performance consideration: deep capture uses on-chip flash/block memory - size memory blocks in Libero before committing to the -1 speed grade timing.
Empfohlen
Medical Diagnostic Equipment
Portable and benchtop medical diagnostics - blood analyzers, patient monitors, imaging front ends - use the M1AFS600-1FG484I to fuse sensor control logic, analog rail supervision, and communication interfaces in one flash-based device. The Fusion ADC and comparators monitor sensor excitation and supply integrity for safety compliance, while the Cortex-M1 runs acquisition sequencing and interface protocols over LVCMOS/UART/USB-bridge links within the 172 I/O. Flash configuration improves start-up reliability for battery-powered carts and supports secure firmware storage. For new RoHS-regulated medical builds, specify the green-package M1AFS600-1FGG484I instead of the leaded FG484I. Performance consideration: medical EMC testing favors slower -1 I/O slew settings available in Libero, an advantage of this speed grade.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für M1AFS600-1FG484I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | M1AFS600-FG484I | M1AFS600-2FG484I | M1AFS600-1FGG484I | M7AFS600-1FG484I | M1AFS1500-FG484I |
|---|---|---|---|---|---|---|
| Package | 484-ball FBGA (FG484) | 484-ball FBGA (FG484) - same | 484-ball FBGA (FG484) - same | 484-ball FBGA (FGG484, green) - same footprint | 484-ball FBGA (FG484) - same | 484-ball FBGA (FG484) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600K | 600K | 600K | 600K | 600K | 1500K |
| ARM Cortex-M1 Support | Yes | Yes | Yes | Yes | Yes (M7 series) | Yes |
Wichtigste Unterscheidungsmerkmale
- Integrated mixed-signal analog front end (vs. A3P600-1FG484I)
- Lead-free green packaging option (vs. M1AFS600-1FGG484I)
- Faster speed grade available in same footprint (vs. M1AFS600-2FG484I)
- Capacity headroom without PCB rework (vs. M1AFS1500-FG484I)
Designhinweise
The 484-ball FBGA requires careful land-pattern design per the Fusion package datasheet (typical land diameter ~0.35 mm on 0.8 mm pitch - verify exact values in the manufacturer package section). Plan I/O bank assignment in Libero SoC before routing: each bank has a single VCCI supply, so group same-voltage standards (LVCMOS 3.3V vs SSTL 2.5V vs LVDS banks) physically on the board. Decouple every VCCI and core VCC pin with 0.1uF ceramics placed within 2 mm of the ball, plus bulk 10uF per bank.
The M1AFS600-1FG484I ordering code contains lead and is RoHS non-compliant per distributor data. If your product ships to EU/RoHS markets or uses lead-free reflow profiles (up to 260C peak), order the M1AFS600-1FGG484I green-package variant instead - it is the same die and footprint. Mixing leaded BGA balls with lead-free assembly pastes risks solder-joint reliability failures, so never substitute the leaded part into a lead-free line without qualification.
Estimated: with a 1.5V core supply, Fusion static power is low (flash-based fabric draws microamp-scale static current per manufacturer family characterization), but dynamic power scales with toggle rate; at 50 MHz with ~30% of tiles toggling, expect several hundred milliwatts of core power - run SmartPower in Libero for your netlist. Supply sequencing: bring VCCI banks and core up per the Fusion power-up specification to avoid latch-up; the on-chip voltage monitor blocks can gate downstream loads until rails are valid.
Two frequent mistakes with this part: (1) assuming AFS600 and A3P600 (ProASIC3) share a pinout in FG484 - they do not, despite the same package name; only same-family (M1AFS/M7AFS) parts are pin-compatible migrations. (2) Migrating a design to the -2 speed grade and assuming the -1 bitstream still meets timing - always re-run place-and-route and static timing analysis in Libero SoC after any ordering-code change, and re-verify the JTAG chain on the first article.
Compliance-Informationen
Per DigChip distributor data: Lead Free Status - Contains Lead; RoHS Status - RoHS Non-Compliant. Use the M1AFS600-1FGG484I green-package variant for RoHS-compliant builds. REACH/halogen/conflict-minerals status not stated in provided data.