Texas Instruments

MAX3232IDG4 - 2/2 RS-232 Transceiver, 3-5.5V, 16-SOIC | TI

Teilenummer: MAX3232IDG4 ✓ Aktiv
3 V to 5.5 V Vdss 16-SOIC Package
MOQ: 1 |

MAX3232IDG4 Übersicht

The Texas Instruments MAX3232IDG4 is a 2/2 full RS-232 transceiver with a 3 V to 5.5 V supply range, designed for bidirectional serial-interface conversion and packaged in a 16-pin SOIC. It integrates two line drivers, two line receivers, a dual charge-pump circuit, and ±15 kV ESD protection on the serial-port connection pins, including ground.

An RS-232 transceiver is an interface IC that translates logic-level signals between a host or peripheral and a differential, bipolar RS-232 link. Within the signal-chain hierarchy, it belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor ecosystem. The MAX3232IDG4 supports both transmit and receive functions while operating from a single 3 V to 5.5 V supply, making it suitable for systems whose digital logic and serial interface use different supply domains.

The device provides two driver channels and two receiver channels, allowing two RS-232 ports to be implemented within one package. Its stated data rate reaches 1 Mbps, and its charge-pump-based level translation uses four external 0.1 µF capacitors. These features suit legacy serial connectivity, industrial control links, service equipment, and embedded systems that still expose an RS-232 port but retain a CMOS or TTL-level host interface.

Internally, the MAX3232IDG4 combines the two line drivers, two line receivers, and dual charge-pump circuitry in one package. Charge-pump circuitry develops the positive and negative voltages required by the RS-232 signaling specification, while the integrated line interface handles thresholding and signal translation. The manufacturer describes the device as meeting the requirements of TIA/EIA-232-F and provides ±15 kV ESD protection on all serial-port pins, including ground.

Typical uses include configuration and maintenance ports on industrial equipment, point-to-point links between embedded controllers and legacy peripherals, and service interfaces for test or measurement instruments. The 16-SOIC package supports conventional surface-mount assembly while preserving a small enough footprint for compact control boards. Designers should still account for the four charge-pump capacitors in placement and stability planning.

A key implementation detail is that the external 0.1 µF capacitors must be connected according to the manufacturer application schematic. Keep these charge-pump components close to their designated pins, provide uninterrupted ground return paths for both logic and serial interfaces, and route exposed cable-side traces away from sensitive clock and analog nodes. Verify signal polarity and connector-side protection before field deployment.

This page combines the manufacturer-described electrical characteristics, package information, verified sourcing links, and interface-specific engineering guidance to support component selection, PCB implementation, and drop-in replacement assessment.

Drop-in-Alternativen für MAX3232IDG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3232IDG4 (gleiche Bauform und Footprint) – abweichend in Maximum Data Rate, Product Type.

Texas Instruments
Maximum Data Rate: 250 kbps
Product Type: Dual RS-232 line driver and receiver
Vergleichen mit MAX3232IDG4 →

MAX3232IDBG4

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 2 · 2 · ±15 kV · 2 · 16-pin SSOP

Preis auf Anfrage

Datenblatt ansehen →

ICL3232IB-T

✅ Drop-In
📦 16-SOIC
Same 16-SOIC footprint, but listed maximum data rate is 250 kbps versus 1 Mbps for MAX3232IDG4, a 75% reduction.

📋 Referenzalternative (nicht im Katalog)

MAX3232IDG4 Technische Daten

Product Type 2/2 full RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V
Number of Drivers 2
Number of Receivers 2
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
External Charge-Pump Capacitors 4 × 0.1 µF
Interface Technology RS-232 and CMOS
RS-232 Compliance TIA/EIA-232-F
Package Type 16-SOIC
Anzahl der Pins 16
Montageart Surface mount
Terminal Form Gull wing
Temperature Grade Industrial

MAX3232IDG4 16-soic Pinbelegungsleitfaden

Pinbelegung für MAX3232IDG4 (16-soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3232IDG4 im 16-soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3232IDG4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3232IDG4 ist geeignet für 6 Anwendungs: Industrial Controller Service Port, Embedded Serial Console, Test and Measurement Interface, Point-to-Point Equipment Link, Legacy Peripheral Adapter, Medical and Laboratory Equipment Interface.

🏭

Industrial Controller Service Port

The MAX3232IDG4 is suitable for an industrial controller that must retain an RS-232 maintenance or configuration interface while using a modern 3 V or 5 V host controller. Its two drivers and two receivers support bidirectional serial communication, and the stated 1 Mbps capability provides margin above legacy RS-232 service-port rates. According to the Texas Instruments datasheet, the interface meets TIA/EIA-232-F requirements and includes ±15 kV ESD protection on the serial-port pins. Place the four 0.1 µF charge-pump capacitors close to the device, provide a solid ground plane, and route the connector-side interface away from sensitive control and timing circuits.

🖥️

Embedded Serial Console

The MAX3232IDG4 can connect a low-voltage embedded controller to a legacy RS-232 console, allowing boot logs, diagnostics, or configuration commands to use an existing serial infrastructure. A single 3 V to 5.5 V supply accommodates both 3 V and 5 V host designs, while the integrated dual charge pumps eliminate separate negative-voltage generation circuitry. The manufacturer describes operation up to 1 Mbps and ±15 kV ESD protection on the external serial-port pins. The board layout should keep charge-pump capacitor loops compact and provide a continuous ground return between the logic ground and the RS-232 connector reference.

🔧

Test and Measurement Interface

The MAX3232IDG4 is appropriate for test and measurement equipment that exposes an RS-232 control channel to a PC, terminal, or service laptop. Two transmitters and two receivers allow the instrument to send commands and receive responses through one compact 16-SOIC device. Its stated 1 Mbps rate covers RS-232 instrument-control links, while ±15 kV ESD protection adds interface robustness for equipment that may be connected to external cables. Use the manufacturer reference circuit for the four 0.1 µF charge-pump capacitors, verify the connector’s signal and ground assignments, and test the completed interface across the required cable length and data rate.

🌐

Point-to-Point Equipment Link

The MAX3232IDG4 can bridge two legacy RS-232-equipped devices when the system requires bidirectional control or status exchange. Its integrated two-driver and two-receiver configuration avoids separate line-driver and receiver packages, while operation from 3 V to 5.5 V supports mixed-generation embedded equipment. According to the Texas Instruments datasheet, the device includes a dual charge-pump circuit and ±15 kV ESD protection. For a reliable point-to-point link, confirm that both endpoints use compatible logic polarity and baud rate, maintain a common ground reference, and keep the external capacitor layout consistent with the datasheet schematic.

🔌

Legacy Peripheral Adapter

The MAX3232IDG4 is useful in a compact adapter that lets a modern embedded system communicate with a legacy RS-232 printer, scanner, controller, or service peripheral. Its 16-SOIC package and two channels per direction reduce board area compared with separate interface ICs, while the 3 V to 5.5 V operating range simplifies adaptation across host platforms. The stated 1 Mbps performance covers many peripheral links, and the serial-port pins include ±15 kV ESD protection. Confirm connector gender and signal assignment in the mechanical design, and validate cable capacitance and ground return because those factors can limit practical RS-232 distance.

💊

Medical and Laboratory Equipment Interface

The MAX3232IDG4 can provide a legacy service connection for laboratory or medical equipment that needs a field-accessible serial diagnostic channel without exposing the main control electronics directly to the cable. Its integrated dual charge pumps, two RS-232 drivers, and two receivers support full-duplex communication from a 3 V to 5.5 V system. According to the manufacturer documentation, the device provides ±15 kV ESD protection on the RS-232 pins and meets TIA/EIA-232-F requirements. Keep the external 0.1 µF capacitors close to the package, maintain isolated cable routing where applicable, and complete the equipment’s applicable safety and regulatory validation.

What is the MAX3232IDG4?
The MAX3232IDG4 is a Texas Instruments 2/2 full RS-232 transceiver operating from 3 V to 5.5 V in a 16-SOIC package. According to the manufacturer datasheet, it integrates two line drivers, two line receivers, a dual charge-pump circuit, and ±15 kV ESD protection on the serial-port connection pins, including ground. It provides the electrical interface between a CMOS or TTL-level logic system and an RS-232 port.
What are the key specifications of MAX3232IDG4 that engineers should know?
The MAX3232IDG4 combines two RS-232 drivers, two receivers, a 3 V to 5.5 V supply range, operation up to 1 Mbps, and ±15 kV ESD protection in a 16-SOIC package. According to the Texas Instruments datasheet, the charge-pump circuit requires four external 0.1 µF capacitors. The device meets TIA/EIA-232-F requirements and is identified as an industrial-temperature-grade component.
Where to download the MAX3232IDG4 datasheet PDF?
The MAX3232IDG4 datasheet can be accessed through the Texas Instruments product information or the linked document page for this part. According to the manufacturer documentation, the key circuit includes four external 0.1 µF charge-pump capacitors and ±15 kV ESD protection on the serial-port pins. Use the manufacturer datasheet for the authoritative pin-description table, electrical limits, and reference application circuit.
Where can I find the MAX3232IDG4 pinout?
Use the pin-description table and package drawing in the MAX3232IDG4 manufacturer datasheet to assign PCB tracks. The part is specified in a 16-SOIC package, but its complete pin names, exposed conditions, and counter-clockwise numbering are not reproduced in the available product listing. The MAX3232IDG4 has two drivers, two receivers, supply pins, ground connections, and charge-pump capacitor connections.
What voltage does the MAX3232IDG4 operate at?
The MAX3232IDG4 operates from a 3 V to 5.5 V supply. According to the Texas Instruments datasheet description, this voltage range allows the interface to share a supply with both 3 V and 5 V logic systems while generating the bipolar voltage levels required by RS-232. Check the electrical-characteristics table for operating limits under each data rate and load condition.
How fast is the MAX3232IDG4 RS-232 transceiver?
The MAX3232IDG4 supports data rates up to 1 Mbps. According to the manufacturer description, it is a low-power, 3 V to 5.5 V RS-232 transceiver using four external 0.1 µF capacitors. The maximum-rate specification applies to compliant electrical operation; cable length, capacitance, loading, grounding, and signal-integrity margin should still be evaluated for the intended RS-232 link.
Does the MAX3232IDG4 include ESD protection?
Yes. The MAX3232IDG4 provides ±15 kV ESD protection on the serial-port connection pins, including ground. According to the Texas Instruments datasheet description, the protection is specified for the external RS-232 interface pins rather than every logic-side pin. System-level protection should still include appropriate connector and cabling practices for the installation environment.
What is the difference between MAX3232IDG4 and MAX3232IDB?
MAX3232IDG4 and MAX3232IDB are closely related 16-SOIC versions of the same MAX3232 interface family. The identified cross-reference describes MAX3232IDB as the same type of 2/2 full RS-232 transceiver with two drivers, two receivers, dual charge pumps, and ±15 kV ESD protection. Review the ordering table and exact suffix codes before approving a substitution because package, temperature, and marking conventions can vary by ordering code.
Can ICL3232IB-T replace the MAX3232IDG4?
ICL3232IB-T is a candidate 16-SOIC RS-232 interface alternative, but substitution requires a final pin-for-pin and specification review. The identified comparison describes it as a 16-SOIC, 5.5 V, 250 kbps interface device, while the MAX3232IDG4 supports 3 V to 5.5 V operation up to 1 Mbps. ICL3232IB-T is therefore a drop-in-footprint candidate, not necessarily a drop-in replacement at the maximum data rate.
What is the best drop-in replacement for MAX3232IDG4?
The closest identified drop-in-footprint candidate is MAX3232IDB from the same MAX3232 family, followed by ICL3232IB-T from a different manufacturer. Confirm the complete pinout, supply limits, driver and receiver logic levels, ESD rating, and data rate before release. The available cross-reference data does not establish five fully qualified drop-in equivalents, so unverified parts should not be treated as production substitutes.
When should I choose MAX3232IDG4 over an alternative?
Choose MAX3232IDG4 when the design requires two drivers, two receivers, 3 V to 5.5 V operation, and data rates up to 1 Mbps in a 16-SOIC package. ICL3232IB-T may suit lower-speed links because its identified comparison lists 250 kbps, while MAX3232IDB remains in the same manufacturer family. Validate the exact electrical limits before using either candidate as a substitute.
Is MAX3232IDG4 suitable for industrial equipment?
MAX3232IDG4 is identified as an industrial-temperature-grade RS-232 interface IC and is suitable for many industrial control and service interfaces when its complete operating-temperature limits are confirmed. According to the Texas Instruments datasheet, it provides ±15 kV ESD protection and supports 3 V to 5.5 V operation. Use the manufacturer ordering information and electrical table to confirm the exact suffix and environmental requirements.
Where can I buy MAX3232IDG4 online?
Use the Request a Quote form on this page to request MAX3232IDG4 availability, current lead time, and order handling. The form is the appropriate commercial channel for a quote-first request and avoids static pricing that may become stale. Confirm the exact 16-SOIC ordering code, including the manufacturer suffix, before authorizing a purchase order.
What is the price of MAX3232IDG4?
The current MAX3232IDG4 price is obtained through the Request a Quote form on this page. Pricing can vary with the exact suffix, order quantity, and supply conditions, so request a quantity-specific quotation for procurement. This page does not publish a static unit price because a current quote is required for an accurate commercial response.
What is the lead time and stock status for MAX3232IDG4?
Request the current MAX3232IDG4 lead time, minimum order quantity, and stock allocation through the Request a Quote form on this page. The available product listings identify the component and its 16-SOIC configuration but do not establish a fixed current lead time for every order quantity. Procurement should confirm packaging, suffix details, and delivery timing with the returned quotation.
How do I design the charge-pump capacitor layout for MAX3232IDG4?
Place all four 0.1 µF charge-pump capacitors close to the pins and follow the exact connection shown in the manufacturer datasheet. According to the Texas Instruments documentation, the MAX3232IDG4 uses four external 0.1 µF capacitors for its dual charge-pump circuit. Keep the associated traces short, provide a low-impedance ground plane, and verify capacitor tolerance and stability requirements against the application schematic.

Technische Referenzdaten für MAX3232IDG4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MAX3232IDG4 when the design needs a compact 16-SOIC RS-232 interface operating from 3 V to 5.5 V at rates up to 1 Mbps. It is a practical fit for industrial service ports, embedded consoles, test equipment, and legacy peripheral adapters, especially where cable-side ESD robustness matters. MAX3232IDB is the closest same-family option when its exact ordering suffix and electrical table match the design. ICL3232IB-T may fit the same 16-SOIC footprint, but its listed 250 kbps rate is 75% below the MAX3232IDG4’s 1 Mbps capability, so it is better suited to conventional low-speed RS-232 links. For either replacement, verify the complete pinout, logic thresholds, charge-pump capacitor arrangement, supply limits, temperature grade, and connector requirements before releasing the substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3232IDB ICL3232IB-T
Package 16-SOIC 16-SOIC 16-SOIC
Brand Texas Instruments Texas Instruments Renesas Electronics
Device Type 2/2 full RS-232 transceiver 2/2 full RS-232 transceiver RS-232 interface transceiver

Wichtigste Unterscheidungsmerkmale

  • Higher stated maximum data rate (vs. ICL3232IB-T)
  • Broader supply-voltage range (vs. ICL3232IB-T)
  • Same-family interface implementation (vs. MAX3232IDB)

Designhinweise

Place the four 0.1 µF charge-pump capacitors close to the pins and reproduce the manufacturer’s application schematic exactly. Keep capacitor and charge-pump traces short, avoid routing them beneath the package where possible, and provide a low-impedance ground plane. The capacitor values and topology are part of the MAX3232 interface design, so changing their connection without reviewing the datasheet can affect startup behavior and signal integrity.

Separate the connector-side RS-232 nets from clocks, ADC inputs, and other sensitive analog or digital nodes. Maintain a continuous ground reference between the logic system and the RS-232 connector, and keep return-current paths short rather than routing them around the board edge. Because the manufacturer specifies ±15 kV ESD protection on the serial-port pins, suitable enclosure and cable practices remain important for severe industrial environments.

Do not treat the 3 V to 5.5 V supply rating as permission to use any logic threshold. Confirm the host interface levels, receiver thresholds, driver polarity, and maximum data rate against the manufacturer electrical-characteristics table. Also verify the exact package width and lead pitch for the selected suffix before substituting MAX3232IDB or ICL3232IB-T, even though both candidates are identified as 16-SOIC devices.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available manufacturer and distributor descriptions identify TIA/EIA-232-F compliance and ±15 kV ESD protection, but they do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

Ähnliche Suchanfragen

MAX3232IDG4 datasheet MAX3232IDG4 pinout MAX3232IDG4 datasheet pdf MAX3232IDG4 equivalent MAX3232IDG4 replacement MAX3232IDG4 cross reference MAX3232IDG4 vs MAX3232IDB MAX3232IDG4 vs ICL3232IB-T Texas Instruments MAX3232IDG4 MAX3232IDG4 16-SOIC pinout MAX3232IDG4 application circuit MAX3232IDG4 price MAX3232IDG4 stock MAX3232IDG4 1 Mbps RS-232

Verwandte Bauteile & Begriffe

Texas Instruments MAX3232IDG4 MAX3232IDB ICL3232IB-T RS-232 RS-232 transceiver line driver line receiver full-duplex transceiver dual charge-pump CMOS TIA/EIA-232-F ESD protection 16-SOIC SOIC family surface-mount package SMD industrial equipment serial communication 3 V to 5.5 V supply 1 Mbps data rate charge-pump capacitor logic-level translation semiconductor
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen