MAX3232IDG4 - 2/2 RS-232 Transceiver, 3-5.5V, 16-SOIC | TI
MPN: MAX3232IDG4 ✓ AktifMAX3232IDG4 Ringkasan
An RS-232 transceiver is an interface IC that translates logic-level signals between a host or peripheral and a differential, bipolar RS-232 link. Within the signal-chain hierarchy, it belongs to the RS-232 transceiver class, interface IC category, and broader semiconductor ecosystem. The MAX3232IDG4 supports both transmit and receive functions while operating from a single 3 V to 5.5 V supply, making it suitable for systems whose digital logic and serial interface use different supply domains.
The device provides two driver channels and two receiver channels, allowing two RS-232 ports to be implemented within one package. Its stated data rate reaches 1 Mbps, and its charge-pump-based level translation uses four external 0.1 µF capacitors. These features suit legacy serial connectivity, industrial control links, service equipment, and embedded systems that still expose an RS-232 port but retain a CMOS or TTL-level host interface.
Internally, the MAX3232IDG4 combines the two line drivers, two line receivers, and dual charge-pump circuitry in one package. Charge-pump circuitry develops the positive and negative voltages required by the RS-232 signaling specification, while the integrated line interface handles thresholding and signal translation. The manufacturer describes the device as meeting the requirements of TIA/EIA-232-F and provides ±15 kV ESD protection on all serial-port pins, including ground.
Typical uses include configuration and maintenance ports on industrial equipment, point-to-point links between embedded controllers and legacy peripherals, and service interfaces for test or measurement instruments. The 16-SOIC package supports conventional surface-mount assembly while preserving a small enough footprint for compact control boards. Designers should still account for the four charge-pump capacitors in placement and stability planning.
A key implementation detail is that the external 0.1 µF capacitors must be connected according to the manufacturer application schematic. Keep these charge-pump components close to their designated pins, provide uninterrupted ground return paths for both logic and serial interfaces, and route exposed cable-side traces away from sensitive clock and analog nodes. Verify signal polarity and connector-side protection before field deployment.
This page combines the manufacturer-described electrical characteristics, package information, verified sourcing links, and interface-specific engineering guidance to support component selection, PCB implementation, and drop-in replacement assessment.
Pilihan pengganti yang segera untuk MAX3232IDG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX3232IDG4 (sama faktor bentuk dan kaki) — berbeza dalam Maximum Data Rate, Product Type.
MAX3232IDBG4
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ICL3232IB-T
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX3232IDG4 Spesifikasi
| Product Type | 2/2 full RS-232 transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| External Charge-Pump Capacitors | 4 × 0.1 µF |
| Interface Technology | RS-232 and CMOS |
| RS-232 Compliance | TIA/EIA-232-F |
| Package Type | 16-SOIC |
| Bilangan Pin | 16 |
| Jenis Pemasangan | Surface mount |
| Terminal Form | Gull wing |
| Temperature Grade | Industrial |
Panduan Konfigurasi Pin MAX3232IDG4 16-soic
Konfigurasi pin untuk MAX3232IDG4 (16-soic pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX3232IDG4.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX3232IDG4 patut untuk 6 aplikasis: Industrial Controller Service Port, Embedded Serial Console, Test and Measurement Interface, Point-to-Point Equipment Link, Legacy Peripheral Adapter, Medical and Laboratory Equipment Interface.
Industrial Controller Service Port
The MAX3232IDG4 is suitable for an industrial controller that must retain an RS-232 maintenance or configuration interface while using a modern 3 V or 5 V host controller. Its two drivers and two receivers support bidirectional serial communication, and the stated 1 Mbps capability provides margin above legacy RS-232 service-port rates. According to the Texas Instruments datasheet, the interface meets TIA/EIA-232-F requirements and includes ±15 kV ESD protection on the serial-port pins. Place the four 0.1 µF charge-pump capacitors close to the device, provide a solid ground plane, and route the connector-side interface away from sensitive control and timing circuits.
Embedded Serial Console
The MAX3232IDG4 can connect a low-voltage embedded controller to a legacy RS-232 console, allowing boot logs, diagnostics, or configuration commands to use an existing serial infrastructure. A single 3 V to 5.5 V supply accommodates both 3 V and 5 V host designs, while the integrated dual charge pumps eliminate separate negative-voltage generation circuitry. The manufacturer describes operation up to 1 Mbps and ±15 kV ESD protection on the external serial-port pins. The board layout should keep charge-pump capacitor loops compact and provide a continuous ground return between the logic ground and the RS-232 connector reference.
Test and Measurement Interface
The MAX3232IDG4 is appropriate for test and measurement equipment that exposes an RS-232 control channel to a PC, terminal, or service laptop. Two transmitters and two receivers allow the instrument to send commands and receive responses through one compact 16-SOIC device. Its stated 1 Mbps rate covers RS-232 instrument-control links, while ±15 kV ESD protection adds interface robustness for equipment that may be connected to external cables. Use the manufacturer reference circuit for the four 0.1 µF charge-pump capacitors, verify the connector’s signal and ground assignments, and test the completed interface across the required cable length and data rate.
Point-to-Point Equipment Link
The MAX3232IDG4 can bridge two legacy RS-232-equipped devices when the system requires bidirectional control or status exchange. Its integrated two-driver and two-receiver configuration avoids separate line-driver and receiver packages, while operation from 3 V to 5.5 V supports mixed-generation embedded equipment. According to the Texas Instruments datasheet, the device includes a dual charge-pump circuit and ±15 kV ESD protection. For a reliable point-to-point link, confirm that both endpoints use compatible logic polarity and baud rate, maintain a common ground reference, and keep the external capacitor layout consistent with the datasheet schematic.
Legacy Peripheral Adapter
The MAX3232IDG4 is useful in a compact adapter that lets a modern embedded system communicate with a legacy RS-232 printer, scanner, controller, or service peripheral. Its 16-SOIC package and two channels per direction reduce board area compared with separate interface ICs, while the 3 V to 5.5 V operating range simplifies adaptation across host platforms. The stated 1 Mbps performance covers many peripheral links, and the serial-port pins include ±15 kV ESD protection. Confirm connector gender and signal assignment in the mechanical design, and validate cable capacitance and ground return because those factors can limit practical RS-232 distance.
Medical and Laboratory Equipment Interface
The MAX3232IDG4 can provide a legacy service connection for laboratory or medical equipment that needs a field-accessible serial diagnostic channel without exposing the main control electronics directly to the cable. Its integrated dual charge pumps, two RS-232 drivers, and two receivers support full-duplex communication from a 3 V to 5.5 V system. According to the manufacturer documentation, the device provides ±15 kV ESD protection on the RS-232 pins and meets TIA/EIA-232-F requirements. Keep the external 0.1 µF capacitors close to the package, maintain isolated cable routing where applicable, and complete the equipment’s applicable safety and regulatory validation.
Data referensi kejuruteraan untuk MAX3232IDG4 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX3232IDB | ICL3232IB-T |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Renesas Electronics |
| Device Type | 2/2 full RS-232 transceiver | 2/2 full RS-232 transceiver | RS-232 interface transceiver |
Penyeberangsung Jelas
- Higher stated maximum data rate (vsICL3232IB-T)
- Broader supply-voltage range (vsICL3232IB-T)
- Same-family interface implementation (vsMAX3232IDB)
Catatan Desain
Place the four 0.1 µF charge-pump capacitors close to the pins and reproduce the manufacturer’s application schematic exactly. Keep capacitor and charge-pump traces short, avoid routing them beneath the package where possible, and provide a low-impedance ground plane. The capacitor values and topology are part of the MAX3232 interface design, so changing their connection without reviewing the datasheet can affect startup behavior and signal integrity.
Separate the connector-side RS-232 nets from clocks, ADC inputs, and other sensitive analog or digital nodes. Maintain a continuous ground reference between the logic system and the RS-232 connector, and keep return-current paths short rather than routing them around the board edge. Because the manufacturer specifies ±15 kV ESD protection on the serial-port pins, suitable enclosure and cable practices remain important for severe industrial environments.
Do not treat the 3 V to 5.5 V supply rating as permission to use any logic threshold. Confirm the host interface levels, receiver thresholds, driver polarity, and maximum data rate against the manufacturer electrical-characteristics table. Also verify the exact package width and lead pitch for the selected suffix before substituting MAX3232IDB or ICL3232IB-T, even though both candidates are identified as 16-SOIC devices.
Maklumat Kesediaan
The available manufacturer and distributor descriptions identify TIA/EIA-232-F compliance and ±15 kV ESD protection, but they do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.