onsemi

MC14060BF - 14-Bit Counter with Oscillator | onsemi

Teilenummer: MC14060BF ✓ Aktiv
16-pin SOIC Package Negative-edge triggered Speed
MOQ: 1 |

MC14060BF Übersicht

onsemi MC14060BF is a 14-stage binary ripple counter with an on-chip oscillator buffer, supplied in a 16-pin SOIC package. It provides 14 binary counter outputs, a common reset function that clears all outputs and disables the oscillator, and an oscillator arrangement that supports RC or crystal timing networks. The clock advances the counter on a negative transition, making the device suitable for frequency division, timing generation, pulse counting, and periodic control functions.

A binary ripple counter is a digital sequential circuit in which each counting stage drives the next stage. The MC14060BF belongs to the counter and divider hierarchy within CMOS logic ICs. Its integrated oscillator removes the need for a separate clock generator when a free-running time base is required. If an external clock is available, the clock input allows the circuit to operate as a divide-by-2 through divide-by-16,384 counter chain.

The on-chip oscillator buffer supports both resistor-capacitor and crystal oscillator configurations. The onsemi datasheet also identifies a Schmitt-trigger clock input, which improves switching behavior when the clock waveform has a slow edge or appreciable noise. Buffered outputs are available from stages 4 through 10 and stages 12 through 14, providing usable drive capability for selected divider outputs in frequency-divider and timing applications.

A common reset input places every counter output into the zero state and disables the oscillator. This behavior allows a system controller to establish a known timing origin, synchronize multiple events, or restart a periodic sequence. Each negative transition on the clock advances the count by one, and the 14 counter stages provide a total division ratio of 16,384 when the highest-order output is used.

Typical applications include digital clocks and timers, industrial sequence controllers, periodic pulse generators, frequency dividers, phase-shift systems, and embedded control systems requiring a local time base. The 16-pin SOIC package also allows the counter to be used on conventional surface-mount control boards where a larger leaded package would be unnecessary.

For reliable oscillator operation, keep the oscillator and clock traces short and place timing components close to the device. When using an RC network, validate component tolerance and temperature behavior across the intended operating range. For crystal timing, follow the manufacturer connection and load recommendations and maintain clean return paths to reduce false clock transitions.

This product page combines the MC14060B functional description, package information, drop-in alternatives, comparison parameters, and practical oscillator and layout guidance to support faster component selection and implementation.

Drop-in-Alternativen für MC14060BF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MC14060BF (gleiche Bauform und Footprint) – abweichend in Mounting Type.

Texas Instruments
Mounting Type: Through-hole
Vergleichen mit MC14060BF →

MC14060BFELG

✅ Drop-In
📦 SOIC-16
Same 14-stage counter and 16-pin SOIC footprint; ordering-suffix temperature or qualification details differ by 0 stage-count difference and require verification.

📋 Referenzalternative (nicht im Katalog)

MC14060BDG

✅ Drop-In
📦 SOIC-16
Same 14-stage binary ripple counter architecture and 16-pin SOIC footprint; suffix-specific grade or ordering characteristics differ while count width remains identical.

📋 Referenzalternative (nicht im Katalog)

MC14060BDR2G

✅ Drop-In
📦 SOIC-16
Same 14-stage binary ripple counter and 16-pin SOIC footprint; reel-code and ordering details differ while counter resolution remains 14 bit.

📋 Referenzalternative (nicht im Katalog)

CD4060BE

✅ Drop-In
Texas Instruments
📦 SOIC-16
14-stage ripple-carry binary counter, divider, and oscillator · CMOS · 14 stages · 14 outputs · 24 MHz · 3 V to 18 V · Negative edge · RC or crystal oscillator

Preis auf Anfrage

Datenblatt ansehen →

MC14060BF Grenzwerte & elektrische Eigenschaften

Counter Type 14-stage binary ripple counter
Counting Bits 14 bit
Oscillator On-chip oscillator buffer
Supported Oscillator Configurations RC or crystal
Clock Transition Negative-edge triggered
Reset Function Common reset clears outputs and disables oscillator
Buffered Output Stages Stages 4 through 10 and 12 through 14
Clock Input Type Schmitt trigger
Maximum Division Ratio 16,384:1
Gehäuse 16-pin SOIC
Terminal Count 16
Montageart Surface mount
RoHS-Status Compliant
Lead-Free Status Pb-free

MC14060BF Pin-Konfiguration

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 OSC1 — Oscillator input or RC oscillator terminal
Pin 2 OSC2 — Oscillator output or RC oscillator terminal
Pin 3 MR — Master reset input
Pin 4 Q0 — Binary counter output
Pin 5 Q1 — Binary counter output
Pin 6 Q2 — Binary counter output
Pin 7 Q3 — Binary counter output
Pin 8 VSS — Ground reference
Pin 9 Q4 — Binary counter output
Pin 10 Q5 — Binary counter output
Pin 11 Q6 — Binary counter output
Pin 12 Q7 — Binary counter output
Pin 13 Q8 — Binary counter output
Pin 14 Q9 — Binary counter output
Pin 15 Q10 — Binary counter output
Pin 16 VDD — Positive supply voltage

Typische Anwendungen

MC14060BF ist geeignet für 6 Anwendungs: Digital Timer and Clock Base, Industrial Frequency Divider, Periodic Pulse Generator, Event and Pulse Counter, Appliance Sequence Controller, Test and Measurement Trigger Source.

🖥️

Digital Timer and Clock Base

The MC14060BF is well suited to establishing a stable time base for digital clocks, timers, and interval counters. Its 14-stage binary ripple architecture divides the selected clock or oscillator frequency into binary intervals up to a 16,384:1 division ratio. The on-chip oscillator can use an RC or crystal network, while the common reset clears every output and disables oscillation for a defined restart. The Schmitt-trigger clock input helps reject noise around the switching threshold. In a countertop timer, the designer can divide a crystal-derived reference, select an appropriate Q output, and use reset to synchronize the displayed interval with the rest of the system.

🏭

Industrial Frequency Divider

The MC14060BF can divide a periodic input into lower-frequency signals for industrial timing, sampling, and control systems. Its 14 binary stages permit division ratios from 2:1 through 16,384:1, allowing several timing intervals to be derived from one reference. Stages 4 through 10 and 12 through 14 use buffered outputs, which is useful when a selected divider output must drive another timing or display stage. The Schmitt-trigger clock characteristic improves reliability with slowly transitioning or noisy waveforms. In an industrial controller, the common reset can restart the divider whenever the master controller requires a new timing cycle.

⚡

Periodic Pulse Generator

The MC14060BF can generate periodic enable or update pulses by combining its oscillator with selected binary counter outputs. With the oscillator running, the 14-stage counter produces successively divided frequencies, allowing a designer to select a practical output interval without an external programmable timer. The buffered stages improve drive strength at useful divider points, while the common reset provides a deterministic way to restart pulse generation. The Schmitt-trigger clock reduces susceptibility to false transitions. This arrangement is appropriate for motor-control sequencing, sampling triggers, and recurring actuator updates where a local time reference is more useful than a free-running software timer.

🔧

Event and Pulse Counter

The MC14060BF can count negative transitions at its clock input and expose the count across its 14 binary outputs. This makes it useful for event totals, batch counting, repetitive-actuation monitoring, and low-speed position or cycle counting. The ripple-counter structure advances one stage per qualifying clock transition, while the common reset clears the count and disables the oscillator when external clocking is used. The maximum binary count spans 14 bits, giving 16,384 distinguishable states. A system controller can decode multiple outputs or latch them into an external register for a human-readable count and event-total display.

🏠

Appliance Sequence Controller

The MC14060BF can organize repetitive appliance operations by dividing a low-frequency clock into discrete timing intervals. A controller can use different binary outputs for motor run, heating, cooling, and standby periods, reducing the number of separate delay circuits needed. The oscillator's support for RC or crystal timing permits a choice between economical component-count timing and higher frequency stability. Reset gives the controller a way to abort or restart the operating sequence from a known state. The 16-pin SOIC package is practical for compact control boards, and buffered outputs help selected timing stages drive loads more effectively.

📺

Test and Measurement Trigger Source

The MC14060BF can serve as a low-frequency trigger or gate source in a test and measurement system. By feeding an external reference into the clock input, the counter can divide that reference into slower, repeatable intervals suitable for sequential measurements. The common reset permits instrumentation to start every acquisition from the same state, while the 14 outputs allow different trigger rates to be selected. The Schmitt-trigger clock input helps preserve event integrity when the source has finite rise or fall times. The integrated oscillator also supports stand-alone functional checks of timer-related circuits without requiring a separate clock generator.

Zusammenfassung der empfohlenen Produkte

MC14060B Base oscillator and counter family Verwendet in: Digital Timer and Clock Base, Event and Pulse Counter CD4060B Pin-for-pin CD4060B-family counterpart Verwendet in: Digital Timer and Clock Base, Event and Pulse Counter, Test and Measurement Trigger Source MC14060BDG Related 16-pin SOIC counter Verwendet in: Industrial Frequency Divider, Appliance Sequence Controller MC14060BDR2G Related 16-pin SOIC counter Verwendet in: Industrial Frequency Divider, Appliance Sequence Controller MC14060BFELG Related oscillator-counter implementation Verwendet in: Periodic Pulse Generator, Test and Measurement Trigger Source MC14060BF onsemi Verwendet in: Periodic Pulse Generator
What is the MC14060BF?
The MC14060BF is an onsemi 14-stage binary ripple counter with an on-chip oscillator buffer in a 16-pin SOIC package. According to the onsemi manufacturer datasheet, it supports RC or crystal oscillator configurations, advances on each negative clock transition, and includes a common reset that clears the outputs and disables the oscillator.
How many bits and counter outputs does the MC14060BF have?
The MC14060BF contains 14 binary counting stages and provides a maximum division ratio of 16,384:1. The onsemi manufacturer datasheet describes it as a 14-stage binary ripple counter, allowing it to divide an input clock into progressively longer time intervals for timing and sequencing circuits.
Does the MC14060BF contain an oscillator?
Yes, the MC14060BF includes an on-chip oscillator buffer. The onsemi manufacturer datasheet states that this oscillator configuration supports both RC and crystal oscillator circuits, so the device can create its own timing reference or operate from an external clock when a fixed synchronization source is required.
What does the reset input do on the MC14060BF?
The common reset input places all MC14060BF outputs into the zero state and disables the on-chip oscillator. According to the onsemi manufacturer datasheet, this gives a controller a deterministic starting condition for timing sequences and prevents the oscillator from running until the circuit is explicitly reset and released.
Which clock edge advances the MC14060BF counter?
A negative transition on the MC14060BF clock input advances the counter to its next state. The onsemi manufacturer datasheet also identifies the clock input as Schmitt-triggered, which helps reject noise and accommodates slower clock edges when the input crosses the switching threshold.
Which MC14060BF outputs are buffered?
Buffered outputs are available from counter stages 4 through 10 and stages 12 through 14. This output arrangement, stated in the onsemi manufacturer datasheet, provides suitable drive for selected divider stages while retaining the standard 14-stage ripple-counter architecture.
Where can I download the MC14060BF datasheet PDF?
The official MC14060BF datasheet PDF is available from the onsemi manufacturer datasheet link on this page. It describes the 14-stage ripple counter, on-chip oscillator buffer, RC and crystal timing options, common reset, Schmitt-trigger clock input, buffered output stages, and package information.
Where can I find the MC14060BF pinout?
The MC14060BF uses a 16-pin SOIC configuration, and its complete pin assignment appears on this page and in the pin-description table of the onsemi manufacturer datasheet. Use that table when assigning oscillator, clock, reset, supply, ground, and counter-output PCB nets.
What is the MC14060BF package and pin count?
The MC14060BF is supplied in a 16-pin SOIC surface-mount package. The onsemi manufacturer datasheet and distributor catalog records identify the device as a 16-terminal logic IC, so the package diagram, land pattern, and PCB footprint must all be selected for the 16-pin version.
Can an MC14060BF replace a CD4060B?
The onsemi MC14060B family is described as a pin-for-pin replacement for the CD4060B. For the MC14060BF, this makes the 16-pin SOIC CD4060B family the relevant cross-brand comparison, but the engineer should verify temperature grade, supply range, timing limits, and ordering code before approving a substitution.
MC14060BF versus CD4060BE: which is better for a timing application?
The MC14060BF is preferable when the onsemi 14-stage counter, Schmitt-trigger clock, and documented buffered divider outputs are required, while a CD4060BE may suit designs standardized around the CD4060B family. The onsemi manufacturer datasheet explicitly identifies MC14060B as a pin-for-pin CD4060B replacement, but electrical conditions and qualification requirements still govern final selection.
When should I choose MC14060BF instead of MC14060BDG?
Choose MC14060BF when its documented temperature grade and ordering configuration match the product requirements. MC14060BDG is another onsemi member of the MC14060B family and may fit an existing 16-pin SOIC design, but package suffix and grade details should be checked against the manufacturer ordering information before substitution.
Is MC14060BF suitable for an RC oscillator timing circuit?
Yes, the MC14060BF is suitable for an RC oscillator timing circuit because its on-chip oscillator buffer supports RC configurations. Choose timing resistors and capacitors for the required frequency, and verify oscillator stability and output jitter across temperature using the timing limits in the onsemi manufacturer datasheet.
Where can I buy MC14060BF and request current lead time?
Use the Request a Quote form on this page to request MC14060BF availability, current lead time, and quantity pricing. The XAIPART quotation process is the appropriate route for obtaining a current commercial commitment without relying on a potentially stale catalog price.
What can replace MC14060BF on the same 16-pin footprint?
The principal drop-in path is the onsemi MC14060B family in the 16-pin SOIC format, including MC14060BDG, MC14060BDR2G, and MC14060BFELG, subject to grade verification. The onsemi family also provides a documented pin-for-pin replacement path for the CD4060B, but each suffix must be checked for temperature grade, package, and qualification requirements.

Technische Referenzdaten für MC14060BF – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MC14060BF when the design requires the onsemi MC14060B function in a 16-pin SOIC and the ordering suffix, temperature grade, and qualification match the product specification. MC14060BFELG, MC14060BDG, and MC14060BDR2G are useful onsemi alternatives when an equivalent 16-pin counter can be qualified through a controlled change process. CD4060BE is the relevant cross-brand option when a product has been standardized around the CD4060B family; the onsemi datasheet describes MC14060B as a pin-for-pin replacement for CD4060B, but supply limits, speed grades, temperature ratings, and qualification requirements must still be checked. Avoid selecting a replacement solely from package shape. Verify the pin names, reset behavior, oscillator connection, buffered output stages, and electrical limits before releasing a production order.

Vergleich mit Alternativen

Parameter Dieses Produkt MC14060BFELG MC14060BDG MC14060BDR2G CD4060BE
Brand onsemi onsemi onsemi onsemi Texas Instruments
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16 SOIC-16
Counter Architecture 14-stage binary ripple counter 14-stage binary ripple counter 14-stage binary ripple counter 14-stage binary ripple counter 14-stage CD4060B-family binary ripple counter
Counting Bits 14 bit 14 bit 14 bit 14 bit 14 bit
Maximum Division Ratio 16,384:1 16,384:1 16,384:1 16,384:1 16,384:1
On-Chip Oscillator Yes Yes Yes Yes Yes
Clock Edge Negative transition Negative transition Negative transition Negative transition Negative transition
Clock Input Type Schmitt trigger Schmitt trigger Schmitt trigger Schmitt trigger Schmitt trigger
Reset Function Clears outputs and disables oscillator Clears outputs and disables oscillator Clears outputs and disables oscillator Clears outputs and disables oscillator Clears outputs and disables oscillator

Wichtigste Unterscheidungsmerkmale

  • Maintains the full 14-stage counting resolution (vs. CD4060BE)
  • Documents buffered drive at selected divider outputs (vs. CD4060BE)
  • Uses the same 16-pin SOIC footprint as the onsemi family alternatives (vs. MC14060BDG)
  • Provides a Schmitt-trigger clock input (vs. MC14060BDR2G)

Designhinweise

Keep the OSC1 and OSC2 paths short, place any RC timing components directly beside their associated pins, and avoid routing these nets beneath noisy switching nodes. For crystal timing, follow the oscillator connection and load recommendations in the onsemi manufacturer datasheet. A clean ground return from the supply and oscillator network reduces susceptibility to false transitions, which is particularly important because each valid negative clock edge advances the counter.

Treat the clock input as a timing signal rather than an ordinary logic input. The MC14060BF clock uses a Schmitt-trigger function, but the connected source should still provide a controlled edge rate and an appropriate voltage margin. When dividing an external signal, check that the source waveform crosses the device thresholds cleanly and that ringing or supply disturbance does not generate an unintended extra negative transition.

Do not assume that every Q output has identical drive strength. The onsemi manufacturer datasheet identifies buffered outputs specifically at stages 4 through 10 and 12 through 14. Confirm the selected output's loading and switching requirements before connecting it to a long trace or high-capacitance load, and use reset only when the intended sequence requires both clearing the count and disabling the oscillator.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Yes
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The onsemi manufacturer datasheet identifies MC14060B devices as Pb-free and RoHS compliant. REACH, halogen-free status, and conflict-minerals status are not stated in the cited material.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MC14060BF datasheet MC14060BF pinout MC14060BF datasheet pdf MC14060BF equivalent MC14060BF replacement MC14060BF drop-in replacement MC14060BF cross reference MC14060BF vs CD4060BE MC14060BF SOIC-16 footprint onsemi MC14060BF MC14060BF oscillator application circuit MC14060BF price MC14060BF stock what is the MC14060BF

Verwandte Bauteile & Begriffe

onsemi MC14060BF MC14060B MC14060BFELG MC14060BDG MC14060BDR2G CD4060BE CD4060B binary ripple counter counter IC logic IC CMOS logic frequency divider on-chip oscillator Schmitt trigger RC oscillator crystal oscillator negative-edge clock common reset binary counter output SOIC-16 surface mount RoHS Pb-free industrial timing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen