MC14060BF - 14-Bit Counter with Oscillator | onsemi
部品番号: MC14060BF ✓ 生産中MC14060BF 概要
A binary ripple counter is a digital sequential circuit in which each counting stage drives the next stage. The MC14060BF belongs to the counter and divider hierarchy within CMOS logic ICs. Its integrated oscillator removes the need for a separate clock generator when a free-running time base is required. If an external clock is available, the clock input allows the circuit to operate as a divide-by-2 through divide-by-16,384 counter chain.
The on-chip oscillator buffer supports both resistor-capacitor and crystal oscillator configurations. The onsemi datasheet also identifies a Schmitt-trigger clock input, which improves switching behavior when the clock waveform has a slow edge or appreciable noise. Buffered outputs are available from stages 4 through 10 and stages 12 through 14, providing usable drive capability for selected divider outputs in frequency-divider and timing applications.
A common reset input places every counter output into the zero state and disables the oscillator. This behavior allows a system controller to establish a known timing origin, synchronize multiple events, or restart a periodic sequence. Each negative transition on the clock advances the count by one, and the 14 counter stages provide a total division ratio of 16,384 when the highest-order output is used.
Typical applications include digital clocks and timers, industrial sequence controllers, periodic pulse generators, frequency dividers, phase-shift systems, and embedded control systems requiring a local time base. The 16-pin SOIC package also allows the counter to be used on conventional surface-mount control boards where a larger leaded package would be unnecessary.
For reliable oscillator operation, keep the oscillator and clock traces short and place timing components close to the device. When using an RC network, validate component tolerance and temperature behavior across the intended operating range. For crystal timing, follow the manufacturer connection and load recommendations and maintain clean return paths to reduce false clock transitions.
This product page combines the MC14060B functional description, package information, drop-in alternatives, comparison parameters, and practical oscillator and layout guidance to support faster component selection and implementation.
ドロップイン代替品: MC14060BF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC14060BF (同一形状・フットプリント) — 相違点: Mounting Type.
MC14060BFELG
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MC14060BDG
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MC14060BDR2G
✅ ドロップイン📋 参考代替品(カタログ未掲載)
CD4060BE
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC14060BF 最大定格&電気的特性
| Counter Type | 14-stage binary ripple counter |
| Counting Bits | 14 bit |
| Oscillator | On-chip oscillator buffer |
| Supported Oscillator Configurations | RC or crystal |
| Clock Transition | Negative-edge triggered |
| Reset Function | Common reset clears outputs and disables oscillator |
| Buffered Output Stages | Stages 4 through 10 and 12 through 14 |
| Clock Input Type | Schmitt trigger |
| Maximum Division Ratio | 16,384:1 |
| パッケージ | 16-pin SOIC |
| Terminal Count | 16 |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
| Lead-Free Status | Pb-free |
MC14060BF ピン構成
| ピン 1 | OSC1 — Oscillator input or RC oscillator terminal |
| ピン 2 | OSC2 — Oscillator output or RC oscillator terminal |
| ピン 3 | MR — Master reset input |
| ピン 4 | Q0 — Binary counter output |
| ピン 5 | Q1 — Binary counter output |
| ピン 6 | Q2 — Binary counter output |
| ピン 7 | Q3 — Binary counter output |
| ピン 8 | VSS — Ground reference |
| ピン 9 | Q4 — Binary counter output |
| ピン 10 | Q5 — Binary counter output |
| ピン 11 | Q6 — Binary counter output |
| ピン 12 | Q7 — Binary counter output |
| ピン 13 | Q8 — Binary counter output |
| ピン 14 | Q9 — Binary counter output |
| ピン 15 | Q10 — Binary counter output |
| ピン 16 | VDD — Positive supply voltage |
主な用途
MC14060BF の用途: 6 件s: Digital Timer and Clock Base, Industrial Frequency Divider, Periodic Pulse Generator, Event and Pulse Counter, Appliance Sequence Controller, Test and Measurement Trigger Source.
Digital Timer and Clock Base
The MC14060BF is well suited to establishing a stable time base for digital clocks, timers, and interval counters. Its 14-stage binary ripple architecture divides the selected clock or oscillator frequency into binary intervals up to a 16,384:1 division ratio. The on-chip oscillator can use an RC or crystal network, while the common reset clears every output and disables oscillation for a defined restart. The Schmitt-trigger clock input helps reject noise around the switching threshold. In a countertop timer, the designer can divide a crystal-derived reference, select an appropriate Q output, and use reset to synchronize the displayed interval with the rest of the system.
おすすめ
Industrial Frequency Divider
The MC14060BF can divide a periodic input into lower-frequency signals for industrial timing, sampling, and control systems. Its 14 binary stages permit division ratios from 2:1 through 16,384:1, allowing several timing intervals to be derived from one reference. Stages 4 through 10 and 12 through 14 use buffered outputs, which is useful when a selected divider output must drive another timing or display stage. The Schmitt-trigger clock characteristic improves reliability with slowly transitioning or noisy waveforms. In an industrial controller, the common reset can restart the divider whenever the master controller requires a new timing cycle.
おすすめ
Periodic Pulse Generator
The MC14060BF can generate periodic enable or update pulses by combining its oscillator with selected binary counter outputs. With the oscillator running, the 14-stage counter produces successively divided frequencies, allowing a designer to select a practical output interval without an external programmable timer. The buffered stages improve drive strength at useful divider points, while the common reset provides a deterministic way to restart pulse generation. The Schmitt-trigger clock reduces susceptibility to false transitions. This arrangement is appropriate for motor-control sequencing, sampling triggers, and recurring actuator updates where a local time reference is more useful than a free-running software timer.
おすすめ
Event and Pulse Counter
The MC14060BF can count negative transitions at its clock input and expose the count across its 14 binary outputs. This makes it useful for event totals, batch counting, repetitive-actuation monitoring, and low-speed position or cycle counting. The ripple-counter structure advances one stage per qualifying clock transition, while the common reset clears the count and disables the oscillator when external clocking is used. The maximum binary count spans 14 bits, giving 16,384 distinguishable states. A system controller can decode multiple outputs or latch them into an external register for a human-readable count and event-total display.
おすすめ
Appliance Sequence Controller
The MC14060BF can organize repetitive appliance operations by dividing a low-frequency clock into discrete timing intervals. A controller can use different binary outputs for motor run, heating, cooling, and standby periods, reducing the number of separate delay circuits needed. The oscillator's support for RC or crystal timing permits a choice between economical component-count timing and higher frequency stability. Reset gives the controller a way to abort or restart the operating sequence from a known state. The 16-pin SOIC package is practical for compact control boards, and buffered outputs help selected timing stages drive loads more effectively.
おすすめ
Test and Measurement Trigger Source
The MC14060BF can serve as a low-frequency trigger or gate source in a test and measurement system. By feeding an external reference into the clock input, the counter can divide that reference into slower, repeatable intervals suitable for sequential measurements. The common reset permits instrumentation to start every acquisition from the same state, while the 14 outputs allow different trigger rates to be selected. The Schmitt-trigger clock input helps preserve event integrity when the source has finite rise or fall times. The integrated oscillator also supports stand-alone functional checks of timer-related circuits without requiring a separate clock generator.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC14060BF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC14060BFELG | MC14060BDG | MC14060BDR2G | CD4060BE |
|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | Texas Instruments |
| Package | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 | SOIC-16 |
| Counter Architecture | 14-stage binary ripple counter | 14-stage binary ripple counter | 14-stage binary ripple counter | 14-stage binary ripple counter | 14-stage CD4060B-family binary ripple counter |
| Counting Bits | 14 bit | 14 bit | 14 bit | 14 bit | 14 bit |
| Maximum Division Ratio | 16,384:1 | 16,384:1 | 16,384:1 | 16,384:1 | 16,384:1 |
| On-Chip Oscillator | Yes | Yes | Yes | Yes | Yes |
| Clock Edge | Negative transition | Negative transition | Negative transition | Negative transition | Negative transition |
| Clock Input Type | Schmitt trigger | Schmitt trigger | Schmitt trigger | Schmitt trigger | Schmitt trigger |
| Reset Function | Clears outputs and disables oscillator | Clears outputs and disables oscillator | Clears outputs and disables oscillator | Clears outputs and disables oscillator | Clears outputs and disables oscillator |
主な差別化要因
- Maintains the full 14-stage counting resolution (vs CD4060BE)
- Documents buffered drive at selected divider outputs (vs CD4060BE)
- Uses the same 16-pin SOIC footprint as the onsemi family alternatives (vs MC14060BDG)
- Provides a Schmitt-trigger clock input (vs MC14060BDR2G)
設計ノート
Keep the OSC1 and OSC2 paths short, place any RC timing components directly beside their associated pins, and avoid routing these nets beneath noisy switching nodes. For crystal timing, follow the oscillator connection and load recommendations in the onsemi manufacturer datasheet. A clean ground return from the supply and oscillator network reduces susceptibility to false transitions, which is particularly important because each valid negative clock edge advances the counter.
Treat the clock input as a timing signal rather than an ordinary logic input. The MC14060BF clock uses a Schmitt-trigger function, but the connected source should still provide a controlled edge rate and an appropriate voltage margin. When dividing an external signal, check that the source waveform crosses the device thresholds cleanly and that ringing or supply disturbance does not generate an unintended extra negative transition.
Do not assume that every Q output has identical drive strength. The onsemi manufacturer datasheet identifies buffered outputs specifically at stages 4 through 10 and 12 through 14. Confirm the selected output's loading and switching requirements before connecting it to a long trace or high-capacitance load, and use reset only when the intended sequence requires both clearing the count and disabling the oscillator.
コンプライアンス情報
The onsemi manufacturer datasheet identifies MC14060B devices as Pb-free and RoHS compliant. REACH, halogen-free status, and conflict-minerals status are not stated in the cited material.