onsemi

MC14018BD - 5-Bit CMOS Johnson Counter | onsemi | SOIC-16

Teilenummer: MC14018BD ✓ Aktiv
16-pin SOIC Package Positive-going edge Speed
MOQ: 1 |

MC14018BD Übersicht

The onsemi MC14018BD is a five-stage CMOS Johnson counter with asynchronous preset and reset inputs, packaged in a 16-pin SOIC. It increments synchronously on the positive-going edge of the clock, and its five counter outputs support divide-by-N operation when the appropriate feedback connection is used. The device is identified in distributor records as a counter IC with one divide-by-N element, five bits, positive-edge operation, and a 16-SOIC package.

A Johnson counter is a binary counter whose outputs change in a shifted sequence rather than following conventional binary counting order. Its feedback structure can implement stable divide-by-N counters when the selected output is returned to the clock or preset logic. This makes the MC14018BD useful in frequency division, sequence generation, timing, and control systems where a configurable count ratio is required.

The MC14018B family provides five asynchronously presettable and resettable counter stages. Preset is controlled through a logic-high preset-enable input, while reset provides a separate asynchronous clearing function. Synchronous counting occurs on the rising clock edge, allowing counter state to advance predictably under a defined clock source. The distinction between asynchronous control inputs and synchronous counting is important when designing reset, preset, or cascading behavior.

The five counter outputs expose intermediate states of the counting sequence. These outputs can be observed directly for state indication or connected according to the desired divide ratio. Because feedback logic determines the effective modulus, correct wiring and timing must be checked against the manufacturer’s counter configuration and truth-table guidance.

Typical uses include digital timing dividers, programmable sequence counters, clock-frequency division, industrial timing modules, and embedded control logic. The SOIC-16 surface-mount package supports compact PCB layouts, while the positive-edge clock architecture works naturally with rising-edge clock sources and standard CMOS control signals.

When laying out the circuit, keep clock and control traces short, provide a stable supply reference, and avoid routing sensitive counter outputs directly through long traces adjacent to high-switching nodes. Decoupling should follow the manufacturer’s recommended application guidance. Because preset and reset are asynchronous, their pulse widths and settling behavior should be reviewed before using them for short control pulses.

This product record combines the manufacturer function description, package and counter classification, sourcing fields, and practical implementation guidance. It also identifies compatible MC14018-family alternatives while clearly separating confirmed drop-in options from related parts that require different packages or function verification.

Drop-in-Alternativen für MC14018BD – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

MC14018BDG

✅ Drop-In
📦 SOIC-16
Same 5-bit positive-edge divide-by-N counter family and 16-SOIC package; manufacturer marking history differs, with MC14018BDG associated with legacy Motorola branding.

📋 Referenzalternative (nicht im Katalog)

MC14018BALDS

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SOIC-16
Same MC14018B Johnson-counter function and 16-pin surface-mount class; ordering code and legacy Motorola suffix differ from MC14018BD.

📋 Referenzalternative (nicht im Katalog)

HCF4018BMY

✅ Drop-In
📦 SOIC-16
Cross-brand CMOS divide-by-N counter in a 16-pin SOIC; verify clock, preset, reset, and counter-output timing against the exact HCF4018B datasheet before substitution.

📋 Referenzalternative (nicht im Katalog)

MC14018BD Grenzwerte & elektrische Eigenschaften

Product Type Presettable divide-by-N counter
Logic Family CMOS
Counter Architecture 5-stage Johnson counter
Number of Counter Stages 5 stages
Counter Output Width 5 bits
Clock Edge Positive-going edge
Counting Mode Synchronous
Preset Function Asynchronous
Reset Function Asynchronous
Preset Enable Logic Logic 1
Gehäuse 16-pin SOIC
Montageart Surface mount

MC14018BD 16-pin soic Pinbelegungsleitfaden

Pinbelegung für MC14018BD (16-pin soic-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MC14018BD im 16-pin soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MC14018BD.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MC14018BD ist geeignet für 6 Anwendungs: Programmable Frequency Dividers, Industrial Timing Sequences, Digital State Generators, Clock and Pulse-Rate Conditioning, Embedded Control Sequencing, Laboratory and Test Equipment Timing.

⚡

Programmable Frequency Dividers

The MC14018BD fits programmable clock-division circuits because its five Johnson counter stages increment synchronously on each positive-going clock edge. Connecting the appropriate counter output into the feedback path establishes the divide-by-N behavior, while reset provides a deterministic starting state. This arrangement is useful for reducing a system clock into slower timing domains in control and sequencing logic. The five available stage outputs provide flexibility in selecting a modulus, but the feedback connection must match the manufacturer’s truth table. Engineers should also verify the maximum operating clock rate and account for propagation delays around the feedback path when operating near the device’s timing limits.

🏭

Industrial Timing Sequences

The MC14018BD is appropriate for industrial timing modules that require repeatable event sequencing rather than ordinary binary up-counting. Its Johnson-counter output sequence changes one state at a time, which can produce predictable one-hot-like sequences useful for stepper sequencing, duty-cycle generation, and multi-stage actuator timing. Synchronous positive-edge counting keeps state transitions aligned with a system clock, while asynchronous reset allows the sequence to be cleared immediately when a fault or emergency-stop condition occurs. Supply-voltage and temperature requirements should be checked for the installation environment before releasing the design.

🧩

Digital State Generators

The MC14018BD can generate a fixed sequence of digital states by observing or combining its five counter outputs. Because the internal architecture is a Johnson counter, the outputs advance through a shifted sequence, making the device suitable for cyclic state machines, relay or lamp progressions, and sampling controllers. The positive-going clock edge provides a clear point at which the state advances, and the separate asynchronous preset and reset inputs support initialization and rapid return to a known condition. Use the manufacturer’s functional diagrams to confirm which output combinations represent each valid state and to prevent unintended repeated states.

🔧

Clock and Pulse-Rate Conditioning

The MC14018BD is useful in clock-conditioning and pulse-rate reduction circuits that need a divided clock derived from a clean periodic input. The counter advances synchronously on the rising edge, so each selected feedback configuration defines a stable relationship between input and output transitions. This can create slower enable pulses, retriggerable timing intervals, or synchronization-enable signals for downstream logic. The design must preserve feedback-loop timing margin because counter propagation delay and external routing contribute to the maximum reliable operating frequency. Decoupling and grounded return paths should also be arranged to prevent clock-edge noise from disturbing adjacent control signals.

📱

Embedded Control Sequencing

The MC14018BD supports embedded sequencing in a controller that must coordinate several discrete events over time. A microcontroller or programmable logic device can generate the clock and control reset or preset, while the MC14018BD advances through a five-stage Johnson sequence and provides multiple status outputs. This division of responsibility reduces timer and state-management effort in the controlling device. Because preset and reset are asynchronous, firmware should release them in a defined order that avoids a race with the clock edge. The selected output must also be checked against the required event order, particularly when cycling or restarting the sequence.

📺

Laboratory and Test Equipment Timing

The MC14018BD can support repeatable timing windows and stepped test sequences in laboratory or test equipment. Its five outputs provide multiple observation points, allowing a designer to monitor different portions of one counting cycle without multiplying clock-generation circuitry. The synchronous count behavior makes the outputs convenient for synchronous test stimuli, while asynchronous reset supports fast initialization between measurements. For laboratory systems operating across a wide ambient range, confirm the device’s rated temperature range and supply limits from the official datasheet. Signal-integrity practices, including short feedback routes and local supply bypassing, remain important even when clock frequencies are moderate.

Zusammenfassung der empfohlenen Produkte

MC14018BDG Same-family MC14018B counter for frequency-feedback designs Verwendet in: Programmable Frequency Dividers, Industrial Timing Sequences, Digital State Generators, Clock and Pulse-Rate Conditioning, Embedded Control Sequencing, Laboratory and Test Equipment Timing
What is the MC14018BD?
The MC14018BD is a five-stage CMOS Johnson counter that increments synchronously on the positive-going edge of its clock. According to the onsemi MC14018B datasheet, it contains five asynchronously presettable and resettable counter stages, enabling programmable divide-by-N operation when the appropriate counter output is fed back. The device is offered in a 16-pin SOIC package and is categorized as a counter IC with a five-bit, positive-edge counter element.
How many counter stages does the MC14018BD contain?
The MC14018BD contains five Johnson counter stages. The onsemi MC14018B datasheet describes the five stages as synchronously incrementing on the positive-going clock edge while remaining asynchronously presettable and resettable. Five individual counter outputs are available, allowing the circuit to be configured for different divide ratios or used as a five-stage state sequence generator through the appropriate feedback arrangement.
Is the MC14018BD counter synchronous or asynchronous?
The MC14018BD is synchronous during counting but asynchronous for preset and reset control. According to the onsemi MC14018B datasheet, counter stages increment together on the positive-going edge of the clock, while preset and reset act asynchronously. This distinction should be considered when the design requires a counter state to clear immediately rather than waiting for a clock transition.
What package does the MC14018BD use?
The MC14018BD uses a 16-pin SOIC surface-mount package. DigiKey identifies the exact MC14018BD listing as a 16-SOIC counter IC, while the onsemi datasheet provides the device family information and functional description. The SOIC-16 package is represented here with the soic-16 package diagram, although the individual pin names were not included in the cited search records.
Where can I download the MC14018BD datasheet PDF?
The official MC14018BD-family datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14018b-d.pdf. It describes the five Johnson counter stages, synchronous positive-edge counting, asynchronous preset and reset, and the device’s counter behavior. The exact MC14018BD orderable part is also listed by DigiKey and Mouser, while historical documents may identify the same device under the former Motorola name.
Where can I find the MC14018BD pinout?
The MC14018BD pin assignment should be taken from the pin-description table and package drawing in the official onsemi MC14018B datasheet. The verified distributor record confirms a 16-SOIC package, but it does not reproduce the pin names or numbering. Use the manufacturer document when assigning clock, reset, preset-enable, and five counter-output nets to the PCB footprint.
What is the difference between asynchronous and synchronous operation in the MC14018BD?
The MC14018BD advances its five counter stages synchronously on the positive-going clock edge, so all stages change together at the active clock transition. Preset and reset are asynchronous, meaning they can change the counter state independently of the clock edge. This combination allows normal counted operation while providing immediate control for initialization or clearing.
How do I configure the MC14018BD as a divide-by-N counter?
The MC14018BD is configured for divide-by-N operation by connecting the appropriate one of its five counter outputs into the preset-enable or feedback path, then holding reset inactive during normal counting. The manufacturer’s MC14018B truth table and functional diagrams identify the correct feedback output for each supported modulus. Verify the feedback edge and timing because incorrect routing can produce unstable or unintended count sequences.
MC14018BD vs MC14018BDG — are they the same counter?
The MC14018BD and MC14018BDG are listed as 16-SOIC divide-by-N counter devices with five-stage Johnson-counter functionality. The MC14018BDG record carries the historical Motorola manufacturer identity, while MC14018BD is listed under onsemi. Existing boards should still be checked against each manufacturer’s ordering information and device markings, but the package and counter classification support using MC14018BDG as the closer same-family replacement candidate.
What is the best drop-in replacement for the MC14018BD?
MC14018BDG is the closest confirmed same-family drop-in candidate because it is listed in a 16-SOIC package with the same five-bit divide-by-N counter function. Its historical MC14018B-family identity supports pin and functional equivalence, although engineers should compare markings and temperature ordering before production use. For a different manufacturer, confirm the replacement’s exact truth table, control timing, and voltage ratings rather than relying only on package similarity.
Is the MC14018BD suitable for industrial timing and sequence-control circuits?
The MC14018BD is suitable for timing and sequence-control designs that require a synchronous positive-edge counter with independently controlled preset and reset functions. Its five-stage Johnson architecture provides five observable outputs and supports configurable divide-by-N behavior. For industrial deployment, verify the device’s operating-voltage and temperature limits against the manufacturer datasheet, then design the external clock and feedback paths to avoid race conditions.
Can MC14018BD be used as a frequency divider?
Yes, the MC14018BD can be used as a frequency divider by feeding the clock input with the source signal and applying the manufacturer-defined feedback connection for the required divide ratio. Because the five counter outputs represent different Johnson-sequence states, the selected output determines the division factor. Confirm timing behavior and maximum clock frequency in the official datasheet before using it as a high-frequency divider.
How should asynchronous reset and preset be designed for MC14018BD?
Treat reset and preset-enable as asynchronous control inputs that can affect the five counter stages outside a clock transition. Provide clean, controlled logic levels and observe the manufacturer’s minimum pulse-width requirements before using narrow pulses. If deterministic removal from reset is required, coordinate reset release with the clock source so the first active edge begins from a stable, known counter state.
What is the MC14018BD price?
Current unit pricing is handled through the Request a Quote form on this page because channel and quantity conditions can change during procurement. The form can also establish current availability and lead time for the exact MC14018BD order code rather than a family member or mechanically different package variant. Use the official manufacturer document and product ordering information to confirm that the quoted configuration matches the required 16-SOIC device.
Where can I buy MC14018BD and check stock and lead time?
Use the Request a Quote form on this page to request current MC14018BD availability, price, and lead time for the exact 16-SOIC order code. The manufacturer and distributor records confirm that MC14018BD is cataloged as a 16-SOIC counter IC, but live stock and order quantities are commercial variables. Quoting the exact MPN avoids confusion with MC14018BDG, other MC14018B package options, or legacy-manufacturer markings.
What are the key specifications of MC14018BD that engineers should know?
The key MC14018BD specifications are its five Johnson counter stages, five counter outputs, synchronous positive-going-edge counting, asynchronous preset and reset, logic-high preset enable, and 16-pin SOIC package. The onsemi datasheet identifies the device as a CMOS presettable divide-by-N counter. Input voltage limits, clock-rate limits, and temperature ratings should be taken from the manufacturer’s detailed electrical characteristics before final circuit design.

Technische Referenzdaten für MC14018BD – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MC14018BD when the design needs a five-stage CMOS Johnson counter with synchronous positive-edge counting, asynchronous preset and reset, five exposed counter outputs, and a 16-pin SOIC footprint. Choose MC14018BDG when its legacy Motorola ordering identity is preferable for continuity with an existing qualified BOM, after checking the manufacturer’s ordering table and device markings. MC14018BALDS is another same-family candidate, but production use should include a complete electrical and timing comparison. HCF4018BMY can be considered when a cross-brand 16-SOIC counter is preferred, subject to confirmation of its exact truth table, control timing, voltage range, and clock-rate limits. For any substitution, verify that the selected feedback output produces the intended divide ratio and that asynchronous reset release cannot race with the clock edge.

Vergleich mit Alternativen

Parameter Dieses Produkt MC14018BDG MC14018BALDS HCF4018BMY
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16
Brand onsemi onsemi onsemi STMicroelectronics
Logic Family CMOS CMOS CMOS CMOS

Wichtigste Unterscheidungsmerkmale

  • Directly listed as a five-bit positive-edge divide-by-N counter (vs. HCF4018BMY)
  • Same-family drop-in candidate with matching package and counter classification (vs. MC14018BDG)
  • Five Johnson stages with separate asynchronous preset and reset (vs. MC14018BALDS)

Designhinweise

Keep the clock path and the selected counter-output feedback route short and isolated from analog or high-current switching paths. Johnson-counter feedback creates a closed timing loop, so added trace length reduces margin and can make operation sensitive to clock-edge noise. Route the five counter outputs according to the required state mapping, maintain a continuous ground reference beneath the device, and avoid stubs that act as unintended antennas.

Do not treat preset and reset as ordinary synchronous commands. The MC14018B family controls these functions asynchronously, so a pulse can change counter state independently of the clock. Define reset release relative to the clock source, observe the manufacturer’s pulse-width requirements, and ensure the preset-enable input is driven to a defined inactive level during ordinary counting. Miswired or floating feedback inputs can produce repeated states rather than the intended divide ratio.

Use a stable supply and place the local bypass capacitor close to the device’s supply and ground pins. Because switching-edge current flows through the supply loop, excessive loop area can couple clock noise into adjacent signals. Follow the manufacturer’s recommended decoupling network and avoid sharing long supply paths with high-current loads. Verify input-voltage tolerance and output-driving requirements against the load before finalizing the power architecture.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific environmental or automotive compliance statements were included in the cited product and search records. Confirm the current declarations using the exact onsemi ordering code and manufacturer documentation.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MC14018BD datasheet MC14018BD pinout MC14018BD datasheet pdf MC14018BD equivalent MC14018BD replacement MC14018BD cross reference MC14018BD price MC14018BD stock onsemi MC14018BD MC14018BD SOIC-16 counter MC14018BD divide by N MC14018BD frequency divider MC14018BD vs MC14018BDG MC14018BD footprint

Verwandte Bauteile & Begriffe

onsemi Motorola MC14018BD MC14018B MC14018BDG MC14018BALDS HCF4018BMY STMicroelectronics Johnson counter presettable divide-by-N counter CMOS logic logic counter integrated circuit semiconductor positive-going edge asynchronous preset asynchronous reset logic-high preset enable SOIC-16 surface mount industrial timing frequency division digital state generation
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen