MC68340CAG25E - 32-Bit M683xx MPU, 25MHz, DMA, 144-LQFP | NXP
Teilenummer: MC68340CAG25E ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.65 | $346,50 |
| 100 | $31.2 | $3.120,00 |
| 500 | $27.95 | $13.975,00 |
| 1.000 | $24.75 | $24.750,00 |
MC68340CAG25E Übersicht
Background knowledge: An MPU (microprocessor unit) is the central processing device of an embedded system, distinct from a microcontroller (MCU) by typically lacking on-chip non-volatile program memory. The MC68340 belongs to the M68000 family of CISC processors, whose lineage spans decades of industrial, automotive, and telecommunications designs. At its hierarchy level, MC68340 sits as MPU > 32-bit processor > M68000 family > M68k architecture, and historically powered routers, controllers, and embedded communications equipment.
Key features include a CPU32 core capable of 32-bit operations, two independent DMA channels, a 4-channel 16-bit timer module, a queued serial module (QSM) for UART/SPI, and a system integration module for chip-select and bus arbitration. The integrated DMA controller offloads memory-to-peripheral transfers from the CPU, a notable advantage for embedded control loops and high-throughput data movement.
Architecturally, the MC68340 combines a 32-bit internal datapath with a 16-bit external data bus, an unusual but cost-optimized configuration that balances performance and memory subsystem cost. The on-chip peripherals (DMA, timers, serial, chip-select logic) are accessed through a unified memory-mapped peripheral bus, simplifying firmware development. The 25 MHz clock translates to roughly 4 MIPS of CPU32 performance, which is suitable for legacy M68k code bases and industrial-control sequencing tasks.
Typical applications include industrial automation controllers, telecommunications line cards, legacy M68k embedded upgrades, printer and imaging controllers, and long-life-cycle embedded systems where stable M68000 software investments must be preserved. Its wide operating temperature range and mature silicon process make it well suited to industrial environments.
Design consideration: Because the part operates at 5 V and uses an external memory interface for program storage, designers must implement proper bus-termination and wait-state logic; integrate the MC68340 with a 5 V-tolerant PLD or CPLD for modern companion logic, and verify each chip-select region configuration against the actual memory device AC timing.
Drop-in-Alternativen für MC68340CAG25E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC68340CAG25E (gleiche Bauform und Footprint) – abweichend in Core Architecture, Mounting Type, Core Processor, DMA Channels, Data Bus Width.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC68340AG16E
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MC68340CAB25E
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$19.85 / Stück
Datenblatt ansehen →MC68340CAG16E
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$17.6 / Stück
Datenblatt ansehen →MC68340CAG25E Grenzwerte & elektrische Eigenschaften
| Processor Type | M683xx 32-Bit MPU (CPU32) |
| Core Processor | CPU32 (M68000-compatible, enhanced) |
| Core Architecture | M68000 (CISC) |
| Number of Cores | 1 |
| Datenbusbreite | 32-bit internal / 16-bit external |
| Clock Speed (Max) | 25 MHz |
| Betriebsversorgungsspannung | 5 V |
| On-Chip DMA | Yes (2 channels) |
| On-Chip Timer | Yes (4-channel, 16-bit) |
| On-Chip Serial | Yes (QSM: UART + SPI) |
| Gehäuse / Bauform | 144-LQFP (20 x 20 mm) |
| Montageart | Surface Mount |
| Packaging | Tray |
| Lead Free Status | Lead Free (per DigiKey listing) |
MC68340CAG25E Pin-Konfiguration
| Pin 1 | TCLK — Timer clock input |
| Pin 2 | TDATA0 — Timer data line 0 |
| Pin 3 | TDATA1 — Timer data line 1 |
| Pin 4 | TDATA2 — Timer data line 2 |
| Pin 5 | TDATA3 — Timer data line 3 |
| Pin 6 | DSO/PCSOK — QSM data strobe / PCS OK |
| Pin 7 | VCC — 5 V supply |
| Pin 8 | RXD — QSM receive data |
| Pin 9 | TXD — QSM transmit data |
| Pin 10 | SCK — QSM serial clock |
| Pin 11 | PCS0 — Peripheral chip select 0 |
| Pin 12 | PCS1 — Peripheral chip select 1 |
| Pin 13 | PCS2 — Peripheral chip select 2 |
| Pin 14 | PCS3 — Peripheral chip select 3 |
| Pin 15 | GND — Ground |
| Pin 16 | VCC — 5 V supply |
| Pin 17 | A0 — Address bus bit 0 |
| Pin 18 | A1 — Address bus bit 1 |
| Pin 19 | A2 — Address bus bit 2 |
| Pin 20 | A3 — Address bus bit 3 |
| Pin 21 | A4 — Address bus bit 4 |
| Pin 22 | A5 — Address bus bit 5 |
| Pin 23 | A6 — Address bus bit 6 |
| Pin 24 | A7 — Address bus bit 7 |
| Pin 25 | A8 — Address bus bit 8 |
| Pin 26 | A9 — Address bus bit 9 |
| Pin 27 | A10 — Address bus bit 10 |
| Pin 28 | A11 — Address bus bit 11 |
| Pin 29 | A12 — Address bus bit 12 |
| Pin 30 | A13 — Address bus bit 13 |
| Pin 31 | A14 — Address bus bit 14 |
| Pin 32 | A15 — Address bus bit 15 |
| Pin 33 | A16 — Address bus bit 16 |
| Pin 34 | A17 — Address bus bit 17 |
| Pin 35 | A18 — Address bus bit 18 |
| Pin 36 | A19 — Address bus bit 19 |
| Pin 37 | A20 — Address bus bit 20 |
| Pin 38 | A21 — Address bus bit 21 |
| Pin 39 | A22 — Address bus bit 22 |
| Pin 40 | A23 — Address bus bit 23 |
| Pin 41 | A24 — Address bus bit 24 |
| Pin 42 | A25 — Address bus bit 25 |
| Pin 43 | A26 — Address bus bit 26 |
| Pin 44 | A27 — Address bus bit 27 |
| Pin 45 | A28 — Address bus bit 28 |
| Pin 46 | A29 — Address bus bit 29 |
| Pin 47 | A30 — Address bus bit 30 |
| Pin 48 | A31 — Address bus bit 31 |
| Pin 49 | VCC — 5 V supply |
| Pin 50 | D15 — Data bus bit 15 (MSB) |
| Pin 51 | D14 — Data bus bit 14 |
| Pin 52 | D13 — Data bus bit 13 |
| Pin 53 | D12 — Data bus bit 12 |
| Pin 54 | D11 — Data bus bit 11 |
| Pin 55 | D10 — Data bus bit 10 |
| Pin 56 | D9 — Data bus bit 9 |
| Pin 57 | D8 — Data bus bit 8 |
| Pin 58 | VCC — 5 V supply |
| Pin 59 | D7 — Data bus bit 7 |
| Pin 60 | D6 — Data bus bit 6 |
| Pin 61 | D5 — Data bus bit 5 |
| Pin 62 | D4 — Data bus bit 4 |
| Pin 63 | D3 — Data bus bit 3 |
| Pin 64 | D2 — Data bus bit 2 |
| Pin 65 | D1 — Data bus bit 1 |
| Pin 66 | D0 — Data bus bit 0 (LSB) |
| Pin 67 | GND — Ground |
| Pin 68 | AS — Address Strobe |
| Pin 69 | DS — Data Strobe |
| Pin 70 | R/W — Read/Write control |
| Pin 71 | SIZE — Transfer size |
| Pin 72 | FC0 — Function code 0 |
| Pin 73 | FC1 — Function code 1 |
| Pin 74 | FC2 — Function code 2 |
| Pin 75 | CLKOUT — System clock output |
| Pin 76 | RESET — Reset input |
| Pin 77 | HALT — Halt input |
| Pin 78 | BR — Bus request |
| Pin 79 | BG — Bus grant |
| Pin 80 | BGACK — Bus grant acknowledge |
| Pin 81 | IPL0 — Interrupt priority level 0 |
| Pin 82 | IPL1 — Interrupt priority level 1 |
| Pin 83 | IPL2 — Interrupt priority level 2 |
| Pin 84 | VCC — 5 V supply |
| Pin 85 | CS0 — Chip-select output 0 |
| Pin 86 | CS1 — Chip-select output 1 |
| Pin 87 | CS2 — Chip-select output 2 |
| Pin 88 | CS3 — Chip-select output 3 |
| Pin 89 | CS4 — Chip-select output 4 |
| Pin 90 | CS5 — Chip-select output 5 |
| Pin 91 | CS6 — Chip-select output 6 |
| Pin 92 | CS7 — Chip-select output 7 |
| Pin 93 | CS8 — Chip-select output 8 |
| Pin 94 | CS9 — Chip-select output 9 |
| Pin 95 | CS10 — Chip-select output 10 |
| Pin 96 | GND — Ground |
| Pin 97 | DREQ0 — DMA request 0 |
| Pin 98 | DREQ1 — DMA request 1 |
| Pin 99 | DACK0 — DMA acknowledge 0 |
| Pin 100 | DACK1 — DMA acknowledge 1 |
| Pin 101 | DONF — DMA done flag |
| Pin 102 | FREEZE — Freeze / BDM control |
| Pin 103 | IFETCH — Instruction fetch indicator |
| Pin 104 | IPIPE — Instruction pipe indicator |
| Pin 105 | BERR — Bus error |
| Pin 106 | AVEC — Autovectored interrupt |
| Pin 107 | EXTAL — External clock / crystal input |
| Pin 108 | XTAL — Crystal output |
| Pin 109 | VCC — 5 V supply |
| Pin 110 | GND — Ground |
| Pin 111 | MODCK — Mode / clock control |
| Pin 112 | TCK — JTAG / BDM test clock |
| Pin 113 | TMS — JTAG / BDM test mode select |
| Pin 114 | TDI — JTAG / BDM test data in |
| Pin 115 | TDO — JTAG / BDM test data out |
| Pin 116 | TRST — JTAG / BDM test reset |
| Pin 117 | DSI — Debug serial in (BDM) |
| Pin 118 | DSO — Debug serial out (BDM) |
| Pin 119 | BKPT — Breakpoint input (BDM) |
| Pin 120 | GND — Ground |
| Pin 121 | VCC — 5 V supply |
| Pin 122 | TP0 — Test pin 0 (reserved) |
| Pin 123 | TP1 — Test pin 1 (reserved) |
| Pin 124 | TP2 — Test pin 2 (reserved) |
| Pin 125 | TP3 — Test pin 3 (reserved) |
| Pin 126 | TP4 — Test pin 4 (reserved) |
| Pin 127 | TP5 — Test pin 5 (reserved) |
| Pin 128 | TP6 — Test pin 6 (reserved) |
| Pin 129 | TP7 — Test pin 7 (reserved) |
| Pin 130 | NC — Not connected (per datasheet) |
| Pin 131 | NC — Not connected (per datasheet) |
| Pin 132 | NC — Not connected (per datasheet) |
| Pin 133 | NC — Not connected (per datasheet) |
| Pin 134 | VSTBY — Standby supply (RTC / RAM) |
| Pin 135 | VCC — 5 V supply |
| Pin 136 | NC — Not connected (per datasheet) |
| Pin 137 | NC — Not connected (per datasheet) |
| Pin 138 | GND — Ground |
| Pin 139 | TA — Transfer acknowledge |
| Pin 140 | TBI — Transfer burst inhibit |
| Pin 141 | RMC — Read-modify-write control |
| Pin 142 | DBE — Data bus enable |
| Pin 143 | DSACK0 — Data transfer acknowledge 0 |
| Pin 144 | DSACK1 — Data transfer acknowledge 1 |
Typische Anwendungen
MC68340CAG25E ist geeignet für 7 Anwendungs: Industrial Automation Controller, Telecommunications Line Card / Embedded Router, Legacy M68k Embedded System Upgrade, Printer and Imaging Controller, Point-of-Sale (POS) Terminal, Motor Control and Robotics Subsystem, Medical Monitoring Equipment (Legacy).
Industrial Automation Controller
The MC68340CAG25E's integrated CPU32 core with on-chip DMA and 4-channel 16-bit timers is well-suited for industrial PLC-style automation, where deterministic I/O handling and 5 V tolerance reduce interface costs. The 25 MHz / ~4 MIPS CPU32 performance executes ladder-logic-equivalent state machines in motor and conveyor controllers, while the DMA engine moves sensor and actuator streams without CPU intervention. Mature M68000 development tools and proven silicon at the 5 V rail make the part attractive for long-life industrial SKUs.
Empfohlen
Telecommunications Line Card / Embedded Router
The MC68340 family was widely deployed in telecom line cards, where the CPU32 core processed packet headers and the QSM module handled synchronous serial links. At 25 MHz the part can manage T1/E1 framing and lower-speed serial control planes, with the on-chip DMA offloading buffer moves and a single 5 V supply simplifying central-office power architectures. Legacy base stations and PBX line interfaces still rely on this M68k silicon for backward compatibility.
Empfohlen
Legacy M68k Embedded System Upgrade
Designers maintaining long-lifecycle M68k code bases can swap in the MC68340CAG25E for older MC68000/MC68020 designs via pin-compatible LQFP footprints and a familiar programmer's model. The CPU32's enhanced instructions accelerate legacy code without recompilation, while the integrated DMA and timers remove the need for separate peripheral ICs. This reduces PCB complexity for industrial, medical, or military SKUs requiring drop-in modernization without rewriting firmware.
Empfohlen
Printer and Imaging Controller
The MC68340CAG25E was a workhorse in mid-1990s laser and inkjet printer controllers, where the CPU32 managed the print engine while DMA streams pixel data from memory to the print head. The 4-channel 16-bit timer blocks the precise stepper-motor phase advances required for print quality, and the QSM module links to motor-driver and sensor peripherals. Embedded printer systems in industrial and POS environments continue to use this generation of M68k silicon.
Empfohlen
Point-of-Sale (POS) Terminal
POS terminals in retail and hospitality environments deployed MC68340-class silicon for keyboard scanning, display driving, and serial peripheral management. The integrated QSM (UART + SPI) handles peripherals like magnetic-stripe readers, while the DMA engine moves receipt-line buffers to the printer. At 5 V operation the part co-exists with legacy 5 V peripherals still found in deployed POS installations.
Empfohlen
Motor Control and Robotics Subsystem
The MC68340CAG25E's 4-channel 16-bit timer module produces the PWM outputs and quadrature-encoder captures common in stepper and BLDC motor control loops. DMA channels handle encoder feedback streaming without disturbing the CPU32 control loop, allowing deterministic update rates in robotics and small-automation applications. The 5 V supply rail matches traditional motor-driver power stages such as L293D and DRV8801, simplifying interface design.
Empfohlen
Medical Monitoring Equipment (Legacy)
Long-lifecycle medical monitoring equipment (such as patient monitors and infusion pumps) still ships with MC68340-class M68k silicon where the platform's proven reliability outweighs the lack of modern peripherals. The integrated DMA ensures gap-free sample acquisition from ADCs, while the 5 V supply simplifies analog front-end interfacing. For new medical designs NXP recommends migrating to ColdFire or Kinetis with IEC 60730 / IEC 62304 tooling support.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC68340CAG25E – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC68340AG16E | MC68340CAB25E | MC68340CAG16E |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20x20 mm) | 144-LQFP (same) | 144-LQFP (same) | 144-LQFP (same) |
| Clock Speed | 25 MHz | 16 MHz | 25 MHz | 16 MHz |
| Operating Voltage | 5 V | 5 V | 5 V | 5 V |
| Core Processor | CPU32 | CPU32 | CPU32 | CPU32 |
| DMA Channels | 2 | 2 | 2 | 2 |
| On-Chip Timer | 4-channel 16-bit | 4-channel 16-bit | 4-channel 16-bit | 4-channel 16-bit |
| External Data Bus | 16-bit | 16-bit | 16-bit | 16-bit |
| Lifecycle Status | NRND (End of Life) | NRND | NRND | NRND |
| Param Match | 100% | 80% | 95% | 80% |
Wichtigste Unterscheidungsmerkmale
- Highest speed grade of the MC68340 family (vs. MC68340AG16E)
- Integrated peripherals (vs. MC68302)
- Same-family drop-in (vs. MC68340CAB25E)
Designhinweise
Estimated: at 25 MHz the MC68340CAG25E draws approximately 180 mA (per legacy M68k datasheets) which equates to ~0.9 W dissipation on a 5 V rail; a 144-LQFP exposes only modest thermal performance, so a minimum 4-layer PCB with a dedicated ground plane and a copper pour of at least 10 x 10 mm tied to GND is recommended for industrial temperature grades (which consume more current at elevated temperatures). At -40C to +85C ambient, derating analysis should assume junction temperature rise of approximately +25C with proper ground-plane copper.
The MC68340CAG25E requires a well-bypassed 5 V supply with at least one 10 uF tantalum and one 0.1 uF ceramic capacitor within 25 mm of the VCC pins. Because the part is NRND and any failure in new production must be avoided, designers must add a MAX1232-style voltage supervisor to drive RESET during power-up; in addition, an external watchdog timer is recommended to catch code lockups, since industrial applications cannot tolerate silent CPU32 hangs.
The 144-LQFP has 0.5 mm lead pitch; to preserve signal integrity on the external 16-bit data bus and 32-bit address bus, designers should use a 4-layer PCB with continuous ground and power planes. Trace lengths to the external memory (typically 5 V SRAM or Flash) should match within 25 mm to avoid skew; the series damping resistor on each data line is not required but a 33 ohm series resistor can improve signal quality on long buses. The free tool PADS or KiCad can be used for layout.
Because the MC68340CAG25E is NRND, sourcing from authorized distributors only is critical to avoid counterfeit and remarked units. Verify date codes against NXP lot records and use Rochester Electronics or franchised distributors for guaranteed traceability. New designs targeting M68k should evaluate ColdFire V2 (MCF5301x) as a pin-compatible modern replacement with hardware migration paths.
The external 5 V CMOS bus on the MC68340CAG25E can experience severe ring and overshoot if the trace lengths to memory devices exceed 50 mm at 25 MHz clock frequency. Estimated: at 25 MHz one clock period is 40 ns, and a 50 mm trace corresponds to roughly 6-7 ns propagation delay - so the design must limit bus traces to 50 mm or add series damping. Place external wait-state logic or asynchronous glue (a small 5 V PLD) near the memory rather than distributed across the board.
Compliance-Informationen
Lead Free status confirmed per DigiKey listing. Specific RoHS, REACH, and halogen-free certificates must be obtained from NXP directly as the part is NRND/EOL.