MC9S08PA16VTG - 8-bit 20MHz S08 MCU, 16KB Flash | NXP
Teilenummer: MC9S08PA16VTG ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.08 | $30,80 |
| 100 | $2.74 | $274,00 |
| 500 | $2.4 | $1.200,00 |
| 1.000 | $2.1 | $2.100,00 |
MC9S08PA16VTG Übersicht
What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip processor with an 8-bit data path, integrated Flash program memory, RAM, and peripherals such as timers, ADCs, and communication interfaces. MCUs sit at the bottom of the embedded computing hierarchy - microcontroller -> embedded controller -> processor -> computing platform - and are commonly used to replace discrete logic in appliances, motor drives, and consumer electronics where deterministic, low-cost control is required. The S08 core is NXP's 8-bit architecture that evolved from the HC08, optimized for low power and motor-control peripherals.
Key features of the MC9S08PA16VTG include 16 KB Flash with in-system programming, hardware EEPROM emulation, a 12-channel 10-bit ADC for analog sensing, two analog comparators, a FlexTimer for motor control PWM, and enhanced ESD/EFT performance designed for harsh industrial environments. The 16-pin TSSOP gives 14 usable I/O pins when using the internal oscillator, while the 5 V I/O tolerance simplifies interfacing to 5 V sensors and actuators without level shifters.
The device integrates an internal clock with FLL stabilization, reducing BOM cost by eliminating an external crystal in many applications. Its peripheral set - PWM, timers, ADC, analog comparator, and on-chip communication - is mapped to specific pins documented in the device datasheet, and the part reuses existing S08 peripherals and development tools (CodeWarrior IDE, S08 Flash programmers, freescale/NXP P&E tools) for migration from earlier S08 designs.
Typical applications include BLDC/PMSM fan and small-motor control, white-goods and appliance control boards, LED lighting controllers, sensor interfaces with on-chip ADC, and low-cost industrial control boards. The 5V-tolerance and EFT/ESD robustness make it especially suitable for white goods where the control board sits near high-voltage switching sections.
A key design consideration is the choice of internal vs. external clock: the internal reference with FLL is sufficient for UART timing at modest baud rates, but designs that need accurate CAN, USB, or high-speed UART timing benefit from an external crystal. Power dissipation in TSSOP-16 at 20 MHz is well below 100 mW and rarely requires thermal analysis.
This page synthesizes distributor pricing, drop-in alternatives within the S08 family, and practical design notes not found in the manufacturer datasheet at a glance.
Drop-in-Alternativen für MC9S08PA16VTG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08PA16VTG (gleiche Bauform und Footprint) – abweichend in Package, Program Memory Size, ADC, Operating Temperature, Maximum CPU Frequency.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S08PA16AVTG
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08PA16VTGE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08PA4VTGR
✅ Drop-In✓ Auf Lager
$1.55 / Stück
Datenblatt ansehen →MC9S08PT16AVTG
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08SL16CTJ
✅ Drop-In✓ Auf Lager
$1.83 / Stück
Datenblatt ansehen →MC9S08QD4CSC
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MC9S08PA16VTG Grenzwerte & elektrische Eigenschaften
| Core Processor | S08 |
| Core Size | 8-Bit |
| Maximum CPU Speed | 20 MHz |
| Program Memory Size | 16 KB (16K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 2 KB |
| EEPROM Size | 256 bytes |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Number of I/O | 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Peripherals | LVD, POR, PWM, WDT |
| ADC | 10-bit, multi-channel |
| Betriebstemperaturbereich | -40C to +105C |
| Gehäuse | 16-TSSOP (0.173, 4.40 mm Width) |
| Montageart | Surface Mount |
| Lebenszyklusstatus | NRND (Not Recommended for New Designs) |
MC9S08PA16VTG Pin-Konfiguration
| Pin 1 | PTB5/TCLK2 — General I/O / Timer channel |
| Pin 2 | PTB4 — General I/O |
| Pin 3 | PTA5/IRQ — General I/O / External interrupt request |
| Pin 4 | PTA4 — General I/O |
| Pin 5 | PTA3 — General I/O |
| Pin 6 | PTA2 — General I/O |
| Pin 7 | PTA1 — General I/O |
| Pin 8 | PTA0 — General I/O |
| Pin 9 | VSS — Ground reference |
| Pin 10 | VDD — Power supply (2.7 V to 5.5 V) |
| Pin 11 | PTB3 — General I/O |
| Pin 12 | PTB2 — General I/O |
| Pin 13 | PTB1 — General I/O |
| Pin 14 | PTB0 — General I/O |
| Pin 15 | BKGD/MS — Background debug / Mode select |
| Pin 16 | RESET — Reset input (active low) |
Typische Anwendungen
MC9S08PA16VTG ist geeignet für 6 Anwendungs: BLDC and Small Motor Control, White Goods and Appliance Control Boards, LED Lighting Controllers, Sensor Interface Hubs, Small Industrial Control Boards, Automotive Body and Interior Modules.
BLDC and Small Motor Control
The MC9S08PA16VTG's on-chip FlexTimer and 10-bit ADC suit low-cost BLDC and PMSM motor control in fans, small pumps, and appliance drives. Its 2.7V-5.5V range and 5V-tolerant I/O allow direct drive of half-bridge gate drivers from a single rail, while the PWM channels deliver complementary or independent outputs with dead-time insertion. Compared with a discrete analog control board, the integrated MCU closes the current/torque loop in software and eliminates manual potentiometer trimming. When migrating to a new design, the MC9S08PA16AVTG is the active variant for the same TSSOP-16 footprint.
Empfohlen
White Goods and Appliance Control Boards
The MC9S08PA16VTG's enhanced EFT/ESD performance and 5 V operation make it a strong fit for washing machine, dishwasher, and oven control boards where the MCU sits next to high-voltage switching sections. The 14 GPIOs handle relay drives, LED indicators, rotary-encoder user inputs, and UART diagnostic ports. The integrated 10-bit ADC reads NTC temperature sensors directly, while the analog comparator enables zero-crossing detection for triac-driven heaters without an external op-amp. Pin-compatible migration to the MC9S08PA16AVTG preserves existing appliance firmware investment.
Empfohlen
LED Lighting Controllers
The MC9S08PA16VTG drives dimmable LED drivers using its PWM outputs for constant-current control or DMX-style dimming. The 2 KB RAM handles smooth fade transitions in software, while the 10-bit ADC reads ambient light sensors or current-sense amplifiers for closed-loop regulation. UART support allows integration with DALI or 0-10V wall dimmers. Compared with a pure analog driver, the MCU enables programmable curves, scene storage, and remote diagnostics, all within a 16-TSSOP package that fits even compact GU10 form factors.
Empfohlen
Sensor Interface Hubs
The MC9S08PA16VTG acts as a sensor front-end, aggregating temperature, humidity, and motion-sensor data via I2C/SPI and forwarding it over UART or LIN. The integrated 10-bit ADC and analog comparator let it also read analog sensors without an external ADC chip. The 256-byte EEPROM stores calibration and unit ID for traceable sensor modules. The 2.7V-5.5V range means the same MCU serves both 3.3V IoT nodes and legacy 5V industrial sensor boards, simplifying the BOM across product families.
Empfohlen
Small Industrial Control Boards
The MC9S08PA16VTG is used in PLC sub-modules, IO-Link device ends, and small industrial controllers where a rugged 8-bit MCU is preferred for deterministic loop times. Its 5V-tolerant I/O drives 24V-translated industrial rails through external buffers, and the integrated watchdog with separate clock source meets industrial safety standards. LIN-bus support also makes it suitable for industrial sensor/actuator networks where cost dominates over Ethernet connectivity. The pin-compatible MC9S08PA16AVTG preserves mechanical layout while extending lifecycle support.
Empfohlen
Automotive Body and Interior Modules
The MC9S08PA16VTG's LIN-bus connectivity makes it a fit for low-speed automotive body modules like window regulators, seat controllers, and HVAC blend-door actuators where CAN is not required. The 8-bit core and 16 KB Flash provide ample headroom for these tasks at a lower cost than 32-bit alternatives. The 5 V tolerance and robust ESD handling suit the automotive electrical environment, while the integrated ADC reads potentiometer inputs directly. Note: this part is not AEC-Q100 qualified - for AEC-Q100 designs, refer to NXP automotive S08 variants.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S08PA16VTG – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S08PA16AVTG | MC9S08PA16VTGE | MC9S08PA4VTG | MC9S08PT16AVTG | MC9S08SL16CTJ | MC9S08QD4CSC |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same |
| Core | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit (PT) | S08 8-bit (SL) | S08 8-bit (QD) |
| Max CPU Speed | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 4 KB (-75%) | 16 KB | 16 KB | 4 KB (-75%) |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Lifecycle Status | NRND | Active | NRND | NRND | Active | Active | NRND |
| FlexTimer / Motor Control PWM | Yes | Yes | Yes | Yes | Reduced | Reduced | No |
Wichtigste Unterscheidungsmerkmale
- Active drop-in upgrade exists with same footprint (vs. MC9S08PA16AVTG)
- Rich FlexTimer peripheral for motor control (vs. MC9S08QD4CSC)
- Same Flash density across multiple family variants (vs. MC9S08PT16AVTG)
Designhinweise
Place a 100 nF decoupling capacitor within 5 mm of the VDD pin, plus a 4.7 uF bulk capacitor on the same rail. This placement handles the S08 core's voltage-noise sensitivity during flash programming bursts. For EFT-robust designs targeting industrial appliance environments, also add a 1 nF X7R bypass directly at the VDD pin per NXP's EFT/ESD application guidance.
The MC9S08PA16VTG's BKGD pin (pin 15) is shared between debug and mode select. Always add a 4.7 kohm pull-up or pull-down to a defined level to prevent accidental mode entry during power-up. Without a defined level on BKGD, the MCU may enter an undefined mode if the pin floats during a brown-out event.
Although the part is NRND and a drop-in active replacement (MC9S08PA16AVTG) exists, do not alter the PCB footprint on existing designs - the VTG and AVTG share identical pinouts, so existing layouts are forward-compatible. Estimated: this enables zero-cost migration from VTG to AVTG without re-spinning the PCB.
Estimated: at 20 MHz and 5 V supply, core current is well below 10 mA, giving power dissipation under 50 mW. The 16-TSSOP thermal resistance of approximately 150 C/W will not cause junction temperature issues even with no copper pours on top layer. Thermal management is rarely needed for this part.
Compliance-Informationen
RoHS and lead-free compliance confirmed via NXP product page. AEC-Q100 not qualified for this commercial-grade part - refer to NXP's automotive S08 variants for AEC-Q100 designs. Halogen-free status not explicitly confirmed in the verified web data.
