MC9S08PA60VLH - 8-Bit 20MHz 60KB MCU | NXP | 64-LQFP
Teilenummer: MC9S08PA60VLH ✗ AbgekündigtMC9S08PA60VLH Übersicht
An 8-bit microcontroller is a programmable semiconductor that executes instructions using an 8-bit data path. The S08 family combines a conventional embedded-control core with flash program memory, RAM, timers, serial interfaces, and analog conversion functions. Within the product hierarchy, the MC9S08PA60VLH belongs to the S08 family of 8-bit microcontrollers and serves as a system-level controller rather than a simple logic or analog component.
The primary features of this device are its 20 MHz maximum clock, 60 KB flash capacity, 2 KB RAM, and 64-pin LQFP construction. Its flash memory supports firmware retention without a separate external memory device, while the 2 KB RAM provides working space for stacks, buffers, and control variables. The package also offers enough peripheral and power connections for mixed-signal industrial and automotive equipment operating from a qualified low-voltage supply.
The S08 architecture is suited to real-time control tasks that do not require the throughput of a 32-bit processor. Timers and event-driven control can manage motor, actuator, sensor, and communication functions, while integrated analog resources support signal acquisition and threshold-based monitoring. Compared with a discrete controller design, consolidation into one MCU reduces external logic, simplifies firmware organization, and frees board area in compact equipment.
Typical applications include automotive body and control modules, industrial sensing equipment, motor-control helpers, low-cost instrumentation, and appliance or building-control products. For a 20 MHz control loop or mixed-signal acquisition system, the combination of 60 KB flash and 2 KB RAM allows more application code and data buffering than a small entry-level MCU while retaining the simplicity of an 8-bit architecture.
Designers should preserve the pinout, power-supply requirements, decoupling, and programming interface defined by the NXP datasheet. The 64-LQFP footprint requires adequate PCB assembly capability, and unused pins should be terminated according to the manufacturer’s recommendations. Firmware development should also use the supported NXP debug and programming tools identified in the device documentation.
This product page combines lifecycle information, source-backed electrical attributes, structured comparison data, replacement constraints, and practical integration guidance. It distinguishes exact package and temperature-order variants from merely similar controllers, helping engineers identify a genuinely pin-compatible replacement before committing a PCB revision.
Drop-in-Alternativen für MC9S08PA60VLH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08PA60VLH (gleiche Bauform und Footprint) – abweichend in Core, Package, Operating Temperature Range, RoHS Status, Flash Memory.
MC9S08PA60AVLH
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08PA60VLF-FR
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MC9S08PT60AVLH
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08PT60VLH
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MC9S08PA60VLH Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit microcontroller |
| Series | S08 |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 60 KB |
| Flash Organization | 60K x 8 bits |
| RAM | 2 KB |
| Architecture | 8-bit |
| Gehäuse | 64-LQFP (10 x 10 mm) |
| Pin-Anzahl | 64 pins |
| Montageart | Surface mount |
| Programming Memory | Flash |
MC9S08PA60VLH 64-lqfp (10 x 10 mm) Pinbelegungsleitfaden
Pinbelegung für MC9S08PA60VLH (64-lqfp (10 x 10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC9S08PA60VLH.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC9S08PA60VLH ist geeignet für 6 Anwendungs: Automotive Control Modules, Industrial Sensor Conditioning, Motor and Actuator Control, Cost-Sensitive Instrumentation, Building and Appliance Control, Communication Interface Module.
Automotive Control Modules
The MC9S08PA60VLH suits compact automotive control modules that coordinate switches, sensors, and actuators while storing control logic in on-chip flash. Its 20 MHz 8-bit S08 core provides deterministic execution for supervisory tasks, and the 60 KB flash capacity accommodates substantially more firmware than a minimal entry-level controller. The 2 KB RAM supports working variables and small communication buffers. Because the device is NRND, it is most appropriate for an already validated vehicle platform or a legacy ECU requiring exact order-code continuity. Engineers should confirm automotive qualification, temperature limits, ESD requirements, and the complete 64-LQFP pin assignment before releasing a new production design.
Empfohlen
Industrial Sensor Conditioning
The MC9S08PA60VLH can serve as the supervisory controller in an industrial sensor-conditioning assembly, combining acquisition logic, threshold decisions, status reporting, and actuator control in one package. Its 20 MHz S08 performance is sufficient for multi-channel monitoring, while 60 KB flash provides room for calibration tables and application firmware. The 2 KB RAM can hold recent samples, filtering state, and packet buffers. The integrated analog capability supports cost-sensitive designs that do not need a separate signal-conditioning controller. Deployment requires careful partitioning of analog and digital ground, use of the manufacturer’s recommended bypass network, and verification of the ADC and timer limits against the actual sensor bandwidth and operating environment.
Empfohlen
Motor and Actuator Control
The MC9S08PA60VLH is appropriate for small motor, valve, or relay-control subsystems where an 8-bit embedded controller must coordinate timing and digital I/O. Its 20 MHz clock allows responsive task scheduling, and its 60 KB flash is sufficient for motion tables, state logic, diagnostics, and communication firmware. Two kilobytes of RAM provides space for counters and control variables, although designers should avoid placing large waveform buffers in on-chip RAM. Timers can generate precision control or pulse signals, but exact channels and resolution must be confirmed in the datasheet. Any replacement must preserve the 64-LQFP footprint and verify pin-level functions such as timer channels, capture inputs, and fault-drive outputs.
Empfohlen
Cost-Sensitive Instrumentation
The MC9S08PA60VLH fits compact instrumentation that requires local measurement, simple calculations, status indication, and data output without a higher-cost application processor. The 20 MHz 8-bit architecture can execute control and communication routines, while the 60 KB flash eliminates the need for external program memory in many designs. Its 2 KB RAM is adequate for short acquisition buffers and protocol handling. The MCU consolidates analog and digital functions into a 10 x 10 mm footprint, simplifying dense instrument layouts. Designers should budget decoupling capacitance, maintain analog-signal grounding, and use the reference manual when assigning debug, programming, and peripheral functions across the 64 leads.
Empfohlen
Building and Appliance Control
The MC9S08PA60VLH can coordinate relays, inputs, displays, and communications in a building-control or appliance-control board where compactness and deterministic 8-bit processing are priorities. The 60 KB flash provides room for operating modes, lookup tables, diagnostics, and communication state machines, while 2 KB RAM supports buffers and scheduling variables. A 20 MHz clock gives useful headroom for multiple periodic tasks without requiring a 32-bit MCU. The 64-LQFP package exposes more I/O than small 20-pin devices and remains manufacturable on conventional leaded-package assembly processes. Firmware must account for startup sequencing, watchdog behavior, brownout response, and safe output states specified in the NXP documentation.
Empfohlen
Communication Interface Module
The MC9S08PA60VLH is useful in a dedicated communication or protocol-conversion module where the MCU handles packet framing, status tracking, local diagnostics, and configuration storage. Its 20 MHz 8-bit core can service interrupt-driven serial traffic, while 60 KB flash accommodates protocol stacks, boot logic, and configuration data. The 2 KB RAM can support transmit and receive buffering, although continuous high-throughput transfers may require careful ISR and DMA considerations. Because serial peripheral assignments and electrical levels are device-specific, engineers must compare the complete pin list and peripheral feature set when considering MC9S08PA60VLH alternatives. A replacement is suitable only when its clock tree, interrupt vectors, memory map, and package connections remain compatible with the firmware design.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S08PA60VLH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S08PA60AVLH | MC9S08PA60VLF | MC9S08PT60AVLH | MC9S08PT60VLH |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Temperature or Qualification Order Code | VLH order code | AVLH order code | VLF order code | AVLH order code | VLH order code |
Wichtigste Unterscheidungsmerkmale
- Direct continuity for existing 64-LQFP S08 designs (vs. MC9S08PA60AVLH)
- Matches the requested PA60 memory and clock configuration (vs. MC9S08PT60AVLH)
- Same-package migration path within the S08 portfolio (vs. MC9S08PT60VLH)
Designhinweise
Assign the PCB footprint from the manufacturer’s 64-LQFP 10 x 10 mm drawing, including pad length, width, pitch, and solder-mask details. The large number of leads leaves little room for routing mistakes around the package. Preserve access to programming and debug signals, and verify the exposed thermal requirement if the package drawing specifies a thermal pad. Do not substitute the 48-pin LQFP or another S08 package even when its flash capacity is similar.
Follow the datasheet’s supply-voltage limits, decoupling values, and power-up sequencing requirements for every VDD and VSS connection. Place the required bypass capacitors close to their associated supply pins and provide a return path that avoids high-current actuator and switching-node currents. For battery-powered or automotive equipment, evaluate brownout behavior and startup current across the complete temperature range before assigning the MCU to an always-on monitoring function.
Separate analog inputs, digital control signals, and clock or programming interfaces as far as the board area permits. The MC9S08PA60VLH includes analog functions, so noisy motor, relay, or switching-regulator traces should not pass beneath sensitive input paths. Use the reference manual and datasheet pin descriptions when assigning multiplexing functions; a signal can move to another multiplexed pin in a related order code, but the physical pin itself may not be electrically interchangeable.
Treat the order code as part of the device specification. Differences among PA60 and PT60 devices can involve qualification, temperature range, or peripheral behavior even when the memory capacity and 64-LQFP outline appear equivalent. Before replacement, compare the complete pin table, clock and reset configuration, memory map, interrupt vector assignments, and programming requirements. Firmware should also include brownout and watchdog recovery behavior for industrial or automotive service life.
Compliance-Informationen
The NXP product page identifies the device as NRND. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not identified in the retrieved product information and remain unknown.