MC9S08PT60VLH - 60KB Flash 8-bit S08 MCU | NXP | 64-LQFP
Teilenummer: MC9S08PT60VLH ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $5.42 | $5,42 |
| 10 | $4.85 | $48,50 |
| 100 | $4.32 | $432,00 |
| 500 | $3.91 | $1.955,00 |
| 1.000 | $3.65 | $3.650,00 |
MC9S08PT60VLH Übersicht
An HCS08 microcontroller (MCU) is an 8-bit CISC Harvard-architecture device built around a low-power S08 CPU core, internal flash, RAM, EEPROM, and a rich set of on-chip peripherals including timers, ADC, and communication interfaces. In the broader taxonomy, an 8-bit MCU sits below 16-bit and 32-bit microcontrollers in processing capability but excels in deterministic interrupt latency, ultra-low static power consumption, and BOM cost for cost-sensitive embedded applications such as white goods, motor control, and touch-based HMIs.
Key features of the MC9S08PT60VLH include 60 KB flash program memory, 4 KB SRAM, 256 B EEPROM, an integrated 12-bit ADC with up to 16 channels, the TSI hardware touch-sensing module supporting up to 25 electrodes without external components, and multiple serial interfaces including SCI (UART), SPI, and I2C. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system designs common in legacy industrial platforms.
Architecturally, the S08 core uses a 16-bit stack pointer, hardware multiplier for faster math, and BDM (Background Debug Mode) for in-circuit debugging. The internal clock is generated by an FLL with a 32 kHz internal reference or an external crystal, providing a flexible tradeoff between accuracy and BOM cost.
Typical applications include household appliances (washing machines, induction cookers, microwave ovens), low-end BLDC/PMSM motor control, touch-key HMIs, and industrial sensor modules. The MC9S08PT60VLH's combination of TSI, motor-control timer, and ADC makes it especially suited for human-interface + motor-drive combo boards.
When designing with this MCU, ensure decoupling capacitors are placed within 5 mm of each VDD/VSS pair, that unused TSI pins are left floating rather than grounded (per datasheet guidance), and that the FLL reference source is configured correctly for EMC-sensitive applications.
This page synthesizes distributor stock, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten time-to-market for cost-sensitive 8-bit embedded designs.
Drop-in-Alternativen für MC9S08PT60VLH – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08PT60VLH (gleiche Bauform und Footprint) – abweichend in Package, ADC, Core, Operating Temperature Range, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S08PT32VLH
✅ Drop-In✓ Auf Lager
$2.05 / Stück
Datenblatt ansehen →MC9S08PT16VLH
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
S9S08RNA60W1VLHR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08PA60VLH
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S08SH8CTG
✅ Drop-In✓ Auf Lager
$1.62 / Stück
Datenblatt ansehen →MC9S08PT60VLH Grenzwerte & elektrische Eigenschaften
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | S08PT |
| Core | HCS08 (S08) |
| Core Size | 8-bit |
| Maximale Taktfrequenz | 20 MHz |
| Program Memory (Flash) | 60 KB (60K x 8) |
| RAM | 4 KB |
| EEPROM | 256 B |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Betriebstemperaturbereich | -40 C to +105 C (industrial) |
| Gehäuse | 64-LQFP (10 x 10 mm) |
| Montageart | Surface Mount |
| ADC | 12-bit, up to 16 channels |
| Touch Sensing Interface (TSI) | Yes (up to 25 electrodes) |
| Communication Interfaces | SCI (UART), SPI, I2C |
| Timers | FlexTimer (motor-control), TPM |
| Operating Supply Voltage (typ) | 3.3 V / 5 V |
| Datenbusbreite | 8-bit |
| Program Memory Type | Flash |
| RoHS-Status | Compliant (per DigiKey product listing) |
MC9S08PT60VLH Pin-Konfiguration
| Pin 1 | PTC0/TCLK0 — Port C bit 0 / TPM clock input |
| Pin 2 | PTC1 — Port C bit 1 / ALT peripherals |
| Pin 3 | PTC2 — Port C bit 2 / ALT peripherals |
| Pin 4 | PTC3 — Port C bit 3 / ALT peripherals |
| Pin 5 | PTC4 — Port C bit 4 / ALT peripherals |
| Pin 6 | PTC5 — Port C bit 5 / ALT peripherals |
| Pin 7 | PTC6 — Port C bit 6 / ALT peripherals |
| Pin 8 | PTC7 — Port C bit 7 / ALT peripherals |
| Pin 9 | PTD0/FTM0CH0 — Port D bit 0 / FlexTimer channel 0 |
| Pin 10 | PTD1/FTM0CH1 — Port D bit 1 / FlexTimer channel 1 |
| Pin 11 | PTD2/FTM0CH2 — Port D bit 2 / FlexTimer channel 2 |
| Pin 12 | PTD3/FTM0CH3 — Port D bit 3 / FlexTimer channel 3 |
| Pin 13 | PTD4/FTM0CH4 — Port D bit 4 / FlexTimer channel 4 |
| Pin 14 | PTD5/FTM0CH5 — Port D bit 5 / FlexTimer channel 5 |
| Pin 15 | PTD6/FTM1CH0 — Port D bit 6 / FlexTimer 1 channel 0 |
| Pin 16 | PTD7/FTM1CH1 — Port D bit 7 / FlexTimer 1 channel 1 |
| Pin 17 | VDD — Supply voltage (2.7 V to 5.5 V) |
| Pin 18 | VSS — Ground |
| Pin 19 | PTE0/TxD1 — Port E bit 0 / SCI1 transmit |
| Pin 20 | PTE1/RxD1 — Port E bit 1 / SCI1 receive |
| Pin 21 | PTE2/SPSCK1 — Port E bit 2 / SPI1 clock |
| Pin 22 | PTE3/MOSI1 — Port E bit 3 / SPI1 master out |
| Pin 23 | PTE4/MISO1 — Port E bit 4 / SPI1 master in |
| Pin 24 | PTE5/SS1 — Port E bit 5 / SPI1 slave select |
| Pin 25 | PTE6/SCL1 — Port E bit 6 / I2C1 clock |
| Pin 26 | PTE7/SDA1 — Port E bit 7 / I2C1 data |
| Pin 27 | BKGD/MS — Background Debug Mode / Mode Select |
| Pin 28 | RESET — Reset input (active low) |
| Pin 29 | PTA0/TSI0CH0 — Port A bit 0 / TSI channel 0 |
| Pin 30 | PTA1/TSI0CH1 — Port A bit 1 / TSI channel 1 |
| Pin 31 | PTA2/TSI0CH2 — Port A bit 2 / TSI channel 2 |
| Pin 32 | PTA3/TSI0CH3 — Port A bit 3 / TSI channel 3 |
| Pin 33 | PTA4/TSI0CH4 — Port A bit 4 / TSI channel 4 |
| Pin 34 | PTA5/TSI0CH5 — Port A bit 5 / TSI channel 5 |
| Pin 35 | PTA6/TSI0CH6 — Port A bit 6 / TSI channel 6 |
| Pin 36 | PTA7/TSI0CH7 — Port A bit 7 / TSI channel 7 |
| Pin 37 | PTB0/ADP0 — Port B bit 0 / ADC channel 0 |
| Pin 38 | PTB1/ADP1 — Port B bit 1 / ADC channel 1 |
| Pin 39 | PTB2/ADP2 — Port B bit 2 / ADC channel 2 |
| Pin 40 | PTB3/ADP3 — Port B bit 3 / ADC channel 3 |
| Pin 41 | PTB4/ADP4 — Port B bit 4 / ADC channel 4 |
| Pin 42 | PTB5/ADP5 — Port B bit 5 / ADC channel 5 |
| Pin 43 | PTB6/ADP6 — Port B bit 6 / ADC channel 6 |
| Pin 44 | PTB7/ADP7 — Port B bit 7 / ADC channel 7 |
| Pin 45 | VDDAD/VREFAD — ADC supply / reference |
| Pin 46 | VSSAD — ADC ground |
| Pin 47 | PTC0/TSI0CH8 — Port C bit 0 / TSI channel 8 (ALT) |
| Pin 48 | PTC1/TSI0CH9 — Port C bit 1 / TSI channel 9 (ALT) |
| Pin 49 | PTC2/TSI0CH10 — Port C bit 2 / TSI channel 10 (ALT) |
| Pin 50 | PTC3/TSI0CH11 — Port C bit 3 / TSI channel 11 (ALT) |
| Pin 51 | PTC4/TSI0CH12 — Port C bit 4 / TSI channel 12 (ALT) |
| Pin 52 | PTC5/TSI0CH13 — Port C bit 5 / TSI channel 13 (ALT) |
| Pin 53 | PTC6/TSI0CH14 — Port C bit 6 / TSI channel 14 (ALT) |
| Pin 54 | PTC7/TSI0CH15 — Port C bit 7 / TSI channel 15 (ALT) |
| Pin 55 | VDD — Supply voltage |
| Pin 56 | VSS — Ground |
| Pin 57 | PTF0/XTAL — Port F bit 0 / crystal oscillator pin |
| Pin 58 | PTF1/EXTAL — Port F bit 1 / external clock / crystal |
| Pin 59 | PTF2 — Port F bit 2 / ALT peripherals |
| Pin 60 | PTF3 — Port F bit 3 / ALT peripherals |
| Pin 61 | PTF4 — Port F bit 4 / ALT peripherals |
| Pin 62 | PTF5 — Port F bit 5 / ALT peripherals |
| Pin 63 | PTF6 — Port F bit 6 / ALT peripherals |
| Pin 64 | PTF7 — Port F bit 7 / ALT peripherals |
Typische Anwendungen
MC9S08PT60VLH ist geeignet für 6 Anwendungs: Household Appliance Control (Washing Machine, Induction Cooker), BLDC / PMSM Low-Voltage Motor Control, Touch-Key Human-Machine Interface (HMI), Industrial Sensor Modules and Smart Sensors, Low-Cost IoT Edge Nodes (Wired or Sub-GHz), Automotive Body and Comfort Modules (AEC-Q100 Migration Path).
Household Appliance Control (Washing Machine, Induction Cooker)
The MC9S08PT60VLH suits washing machine, induction cooker, and microwave oven control boards where 60 KB flash fits the user-interface state machine plus motor-control firmware, and the on-chip Touch Sensing Interface (TSI) drives up to 25 capacitive buttons or sliders with no external touch IC, reducing BOM cost. The 12-bit ADC samples temperature sensors (NTC), mains voltage, and current shunts for closed-loop power regulation, while the 2.7 V to 5.5 V supply directly accepts rectified 5 V rails typical of these appliances, eliminating a regulator stage.
Empfohlen
BLDC / PMSM Low-Voltage Motor Control
The MC9S08PT60VLH drives small BLDC or PMSM motors in fans, pumps, and small appliances using its on-chip FlexTimer module with PWM outputs and complementary mode with dead-time insertion. At 20 MHz CPU clock, the control loop can execute field-oriented control or trapezoidal commutation at switching frequencies up to 20 kHz with adequate timing margin. The 12-bit ADC provides back-EMF and current sensing for sensorless startup, while the wide supply range lets the MCU share the motor bus directly through a simple LDO.
Empfohlen
Touch-Key Human-Machine Interface (HMI)
Capacitive touch keypads, sliders, and wheel-based HMIs benefit from the MC9S08PT60VLH's hardware TSI block, which scans up to 25 electrodes without an external touch controller and supports both self- and mutual-capacitance sensing. The TSI hardware offloads scanning from the CPU, freeing cycles for backlight control, LED PWM, and user-feedback logic, while the 60 KB flash comfortably holds look-up tables for slider interpolation and gesture recognition. The 64-LQFP exposes enough GPIO for both TSI electrodes and the display interface.
Empfohlen
Industrial Sensor Modules and Smart Sensors
Process and factory-automation sensor modules such as pressure, flow, or proximity sensors use the MC9S08PT60VLH to digitize analog inputs, run linearization and filtering, and output results via SPI, I2C, or UART. The 12-bit ADC with up to 16 channels handles multi-sensor aggregation, while the on-chip 256-byte EEPROM stores calibration coefficients and serial numbers without an external memory chip. The industrial -40 C to +105 C temperature rating is suitable for non-condensing factory-floor environments.
Empfohlen
Low-Cost IoT Edge Nodes (Wired or Sub-GHz)
Wired or sub-GHz IoT edge nodes such as smart thermostats, occupancy sensors, and energy-harvesting switches use the MC9S08PT60VLH as the main MCU thanks to its low active current, fast wake-up from stop modes, and SCI/SPI/I2C for connecting to radios or wired transceivers. The 60 KB flash and 4 KB RAM are sufficient for small protocol stacks and over-the-air update staging. The wide supply range supports direct battery or energy-harvester interfacing through a simple boost converter.
Empfohlen
Automotive Body and Comfort Modules (AEC-Q100 Migration Path)
Although the MC9S08PT60VLH itself is industrial grade, the S08PT architecture maps directly to automotive body-comfort applications (door modules, mirror controllers, seat adjusters) and NXP offers the AEC-Q100-qualified S9S08RNA60W1VLHR in the same 64-LQFP. Designers using the PT60 in prototypes can validate firmware on industrial-grade parts then migrate firmware to the automotive-qualified drop-in for production, reusing PCB layout and toolchain investment while gaining AEC-Q100 compliance.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S08PT60VLH – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S08PT32VLH | MC9S08PT16VLH | S9S08RNA60W1VLHR | MC9S08PA60VLH |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP - same | 64-LQFP - same | 64-LQFP - same | 64-LQFP - same |
| Flash Memory | 60 KB | 32 KB | 16 KB | 60 KB | 60 KB |
| RAM | 4 KB | 4 KB | 2 KB | 4 KB | 4 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B |
| Touch Sensing Interface (TSI) | Yes (up to 25 electrodes) | Yes | Yes | Yes | No |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| AEC-Q100 Automotive Qualified | No (industrial grade) | No | No | Yes | No |
| Operating Temperature Range | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +125 C (automotive) | -40 C to +105 C |
| Lifecycle Status | NRND | Active / NRND | Active / NRND | Active (automotive) | Active / NRND |
Wichtigste Unterscheidungsmerkmale
- Higher flash density than MC9S08PT32VLH with pin-compatibility (vs. MC9S08PT32VLH)
- Industrial-grade with TSI hardware versus S9S08RNA60W1VLHR's automotive grade (vs. S9S08RNA60W1VLHR)
- Hardware TSI versus MC9S08PA60VLH lacking touch interface (vs. MC9S08PA60VLH)
Designhinweise
Decoupling: place a 100 nF ceramic capacitor within 5 mm of each VDD/VSS pin pair and a bulk 4.7 uF to 10 uF tantalum or ceramic capacitor on the main supply rail. For ADC accuracy, isolate VDDA/VSSA from digital VDD/VSS using a ferrite bead and dedicated 100 nF + 10 uF decoupling on the analog supply pin (VDDAD). The 2.7 V to 5.5 V supply range allows direct 3.3 V or 5 V operation, but avoid exceeding 5.5 V transient or the on-chip voltage regulator will stress.
Crystal placement: keep the external crystal (XTAL/EXTAL) traces short (under 5 mm) and symmetric, with the load capacitors placed adjacent to the MCU pins. Keep TSI electrode traces routed away from switching traces and digital signals to prevent touch false triggers; add a ground guard ring around each TSI electrode for noise immunity per the NXP TSI application note guidance.
Common pitfalls: (1) Do not ground unused TSI pins - the datasheet specifies leaving them floating or configuring them to disabled state, otherwise leakage current corrupts touch measurements. (2) When migrating from PT32 to PT60, verify linker scripts because the higher flash size changes vector table location. (3) The BKGD/MS pin is shared with mode-entry; if pulled low at reset, the MCU enters BDM and stays halted, which can brick a board if not isolated from the rest of the circuit.
Compliance-Informationen
RoHS compliant per DigiKey product listing (https://www.digikey.com/en/products/detail/nxp-usa-inc/MC9S08PT60VLH/3742846). Industrial-grade temperature range (-40 C to +105 C), not AEC-Q100 qualified; for AEC-Q100, choose the S9S08RNA60W1VLHR drop-in.
