MC9S12E64MFU - 16-Bit 25MHz 64KB Flash MCU | NXP
Teilenummer: MC9S12E64MFU ✓ AktivMC9S12E64MFU Übersicht
An MCU, or microcontroller, is a semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The MC9S12E64MFU belongs to the 16-bit microcontroller hierarchy, combining embedded processing, on-chip flash and RAM, and standard input/output resources. Its opcode compatibility with the 68HC11 architecture supports the broader HCS12 ecosystem and established 16-bit embedded-control design methods.
Core memory and interface features include 64K x 8 flash program memory, 4K x 8 RAM, and 60 I/O lines. The 25MHz maximum speed supports the bus configurations identified in the family documentation: 25MHz operation at 5V provides a minimum instruction cycle time of 40 ns, while 16MHz operation at 3.3V provides a minimum instruction cycle time of 62.5 ns. These operating points give designers flexibility when balancing processing throughput, voltage, and power-management requirements.
The MC9S12E64MFU is intended for general-purpose embedded systems in which flash storage, RAM, serial and timer peripherals, and a moderate number of external I/O lines are required. Its 80-QFP package exposes substantially more I/O than a small surface-mount microcontroller package, making it appropriate for systems that need dedicated control signals, communication interfaces, sensor inputs, or actuator outputs without requiring a very large fine-pitch package.
Typical applications include automotive body and subsystem controllers, industrial automation equipment, appliance control boards, communication modules, and general embedded-control platforms. The automotive-grade component classification reported for this ordering code is relevant to temperature-qualified vehicle electronics, although individual vehicle programs must complete their own environmental, functional-safety, and qualification reviews before production release.
PCB design should preserve the pin assignments and exposed connections shown in the manufacturer datasheet and account for all 80 package terminals. Power, ground, oscillator, programming, and communication routing should follow the reference circuit and layout guidance, while unused inputs should be configured to avoid floating states and unused outputs should be left in defined states during reset and programming.
This product record combines the exact ordering information, memory configuration, package characteristics, bus timing, and sourcing details with practical replacement and design guidance. It is intended to help engineers confirm footprint, voltage, memory, lifecycle, and supply requirements before integrating the MC9S12E64MFU into a new or existing embedded-control design.
Drop-in-Alternativen für MC9S12E64MFU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S12E64MFU (gleiche Bauform und Footprint) – abweichend in Program Memory Size, RAM Size, Program Memory Type, Connectivity, Oscillator Type.
MC9S12E64CFUER
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MC9S12E64MFU Grenzwerte & elektrische Eigenschaften
| Product Type | 16-bit HCS12 microcontroller |
| Program Memory Size | 64KB (64K x 8) |
| Program Memory Type | Flash |
| RAM Size | 4KB (4K x 8) |
| Maximum CPU Frequency | 25MHz |
| Number of I/O Pins | 60 pins |
| Gehäuse | 80-QFP (14 x 14 mm) |
| Oscillator Type | Internal |
| Packaging | Tray |
| 5V Bus Frequency | 25MHz |
| Minimum Instruction Cycle Time at 5V | 40ns |
| 3.3V Bus Frequency | 16MHz |
| Minimum Instruction Cycle Time at 3.3V | 62.5ns |
| Instruction Compatibility | Opcode compatible with the 68HC11 architecture |
| Temperature Grade | Automotive |
| Terminal Form | Gull wing |
| Supply Voltage Details | 5V at 25MHz or 3.3V at 16MHz bus operation |
MC9S12E64MFU 80-qfp (14 x 14 mm) Pinbelegungsleitfaden
Pinbelegung für MC9S12E64MFU (80-qfp (14 x 14 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC9S12E64MFU.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC9S12E64MFU ist geeignet für 6 Anwendungs: Automotive Body Control, Industrial Automation Controller, Appliance Control Board, Communication Gateway, Sensor and Actuator Hub, Programmable Test and Control Module.
Automotive Body Control
The MC9S12E64MFU is suitable for consideration in automotive body-control modules because it combines a 16-bit HCS12 processor, 64KB of flash program memory, 4KB of RAM, and 60 I/O pins in an 80-QFP package. Its maximum operating frequency of 25MHz supports responsive control tasks involving switches, sensors, lamps, and actuator interfaces. The family documentation identifies 25MHz bus operation at 5V and 16MHz at 3.3V, allowing the architecture to align processing speed with the vehicle electrical environment. A production design must confirm the ordering code’s full temperature range, AEC-Q100 status, EMC performance, diagnostic requirements, and any vehicle-specific safety process. The 60 available I/O lines also allow several inputs and outputs to be distributed without adding a separate I/O expander.
Empfohlen
Industrial Automation Controller
The MC9S12E64MFU fits compact industrial automation controllers that require deterministic 16-bit processing and multiple external signals. Its 64KB flash can hold the control application, while 4KB of RAM supports working variables, state tracking, and communication buffers. Sixty I/O pins provide a practical interface density for digital sensors, interlocks, status indicators, and discrete actuator commands. The processor can operate up to 25MHz, with the family documentation specifying a 40ns minimum instruction cycle at 25MHz and 5V. System designers should separate noisy motor or relay paths from sensitive control signals, use suitable protection for industrial wiring, and verify timing against the controller’s worst-case workload rather than relying only on the headline clock rate.
Empfohlen
Appliance Control Board
The MC9S12E64MFU is applicable to appliance controllers where a readable control architecture, embedded firmware storage, and numerous signal connections are valuable. The 64KB flash capacity accommodates application firmware and fixed parameters, while 4KB of RAM handles live state, timers, and interface handling. With 60 I/O pins, the controller can connect door switches, temperature inputs, display segments, motors, and status lamps while retaining additional I/O for accessories. Its 80-QFP package is larger than a compact leadless MCU but offers generous routing flexibility and a straightforward gull-wing land pattern. Design work should include brownout behavior, motor-transient isolation, grounded return paths, and firmware checks for stuck sensors or unexpected relay states.
Empfohlen
Communication Gateway
The MC9S12E64MFU can support a protocol-conversion or communications gateway when the design needs a 16-bit embedded controller with moderate memory and extensive I/O. Its 25MHz maximum operation rate is sufficient for many supervisory and framing tasks, while 64KB of flash and 4KB of RAM provide space for protocol stacks, configuration data, and packet buffers. The 60-I/O count allows multiple serial interfaces, indicator controls, reset inputs, and status signals to be connected through the 80-QFP package. Engineers should calculate worst-case interrupt latency and buffer occupancy, isolate communication connectors from power-conversion stages, and ensure grounding supports both low-voltage logic and attached cable transients. Exact peripheral assignments and alternate-function multiplexing must be taken from the datasheet pin table.
Empfohlen
Sensor and Actuator Hub
The MC9S12E64MFU is well suited to a sensor-and-actuator hub that gathers multiple inputs and coordinates outputs in a machine or appliance. The 60 I/O lines reduce the need for multiplexing when connecting digital sensors, encoders, limit switches, and output drivers, while the 64KB flash supports calibration tables and control routines. The controller can run at 25MHz for responsive input sampling and state-machine execution, subject to the operating point and timing defined in the family documentation. In a completed board, place connector protection near the external interface, maintain short return paths for high-current outputs, and use filtering appropriate to the sensor bandwidth. Firmware should include safe-state defaults so outputs remain defined during reset and initialization.
Empfohlen
Programmable Test and Control Module
The MC9S12E64MFU can serve as the central controller in a programmable test fixture or manual control module where operators and automated equipment need multiple digital channels. Its 16-bit architecture, 64KB of embedded flash, 4KB of RAM, and 25MHz maximum frequency support test sequencing, measurement control, and communication tasks. The 60-I/O capability allows fixture sensing, pass/fail signals, programmable controls, and status indication to be integrated on one board. The 80-QFP package provides adequate access to these functions without the complexity of a very large ball-grid array. Designers should account for fixture transition hazards, unused input states, test-point accessibility, and the possibility that external test equipment will inject signals into MCU ports during programming or reset.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S12E64MFU – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S12E64CFU |
|---|---|---|
| Brand | NXP | NXP |
| Package | 80-QFP (14 x 14 mm) | 80-QFP (14 x 14 mm) |
| Program Memory | 64KB (64K x 8) flash | 64KB (64K x 8) flash |
| RAM | 4KB (4K x 8) | 4KB (4K x 8) |
| Maximum Frequency | 25MHz | 25MHz |
| Number of I/O | 60 pins | 60 pins |
Wichtigste Unterscheidungsmerkmale
- Matches the cited core configuration of the closest same-family candidate (vs. MC9S12E64CFU)
- Uses a 14 mm by 14 mm 80-QFP package (vs. MC9S12E64CFU)
- Provides a defined 3.3V operating point (vs. MC9S12E64CFU)
Designhinweise
Use the 80-QFP land pattern associated with the exact 14 mm by 14 mm package and verify all 80 terminals against the manufacturer pin-description table. The public package-library set does not contain a matching 80-terminal QFP key, so the displayed package drawing uses the default library representation. Before fabrication, cross-check pin 1, pin numbering, exposed or thermal features, courtyard limits, solder-mask clearance, and paste volumes using the manufacturer package drawing.
Route oscillator, reset, programming, and communication signals away from switching nodes and high-current output returns. The internal oscillator does not remove the need for careful clock and grounding layout because external crystal or resonator support, where applicable, remains sensitive to capacitance and pickup. Use short ground returns, continuous ground-plane paths beneath appropriate sections of the device, and separate return currents for motors, relays, lamps, and other inductive loads.
Do not treat the 25MHz maximum as a voltage-independent operating point. The family documentation identifies 25MHz bus operation at 5V with a 40ns minimum instruction cycle and 16MHz operation at 3.3V with a 62.5ns minimum cycle. Confirm the supply range, external-component values, reset timing, watchdog behavior, clock configuration, and peripheral operating constraints in the manufacturer datasheet before selecting the operating frequency for the complete board.
Compliance-Informationen
The component is classified as automotive-grade in one component listing, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Verify each declaration using the current manufacturer product documentation before regulatory or production use.