MC9S12XA512CFV - 16-Bit HCS12X MCU 512KB Flash 40MHz | NXP
Teilenummer: MC9S12XA512CFV ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.75 | $257,50 |
| 100 | $22.4 | $2.240,00 |
| 500 | $19.95 | $9.975,00 |
| 1.000 | $17.85 | $17.850,00 |
MC9S12XA512CFV Übersicht
A microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable I/O peripherals on one chip. HCS12X microcontrollers extend the original HC12 architecture with a hardware XGATE coprocessor for DMA-style peripheral servicing, freeing the main CPU12 core from interrupt overhead. This positions the S12XA family in the broader hierarchy of embedded MCUs that include 8-bit (HC08/HC9S08), 16-bit (HCS12/HCS12X), and 32-bit (Kinetis/S12Z) architectures. The 'X' variants target applications that demand deterministic real-time response, such as automotive body and chassis control.
Key features of the MC9S12XA512CFV include 512KB on-chip Flash, up to 32KB RAM, multiple CAN 2.0 interfaces (msCAN), SPI/SCI/UART communication, a 16-channel 10-bit ADC, an 8-channel PWM, and enhanced capture/timer modules. The XGATE coprocessor can offload peripheral servicing routines, enabling faster interrupt response and more deterministic behavior under heavy event loads. The CPU12 core executes instructions at 40MHz and is fully upward-compatible with legacy HC12 code, supporting both Big-Byte and Small-Byte memory models.
The device operates from a 3.15V to 5.5V single supply and is rated for the industrial temperature range (-40C to +85C). Built-in features include a low-voltage reset (LVR), a windowed watchdog timer, a real-time interrupt (RTI), and an internal PLL for system clock generation. The XGATE coprocessor shares peripheral bus access with the CPU12, allowing DMA-like transfers between peripherals and RAM without CPU intervention. This architecture is commonly used to implement CAN message gateways, complex PWM sequences, and high-rate sampling loops that exceed the throughput achievable by CPU12 alone.
Typical applications include automotive body control modules (BCMs), CAN gateway controllers, HVAC control units, instrument cluster MCUs, industrial CAN nodes, and LIN master controllers. Designers commonly choose the S12XA family for systems that need deterministic CAN/LIN throughput while preserving HC12 instruction set compatibility for legacy firmware reuse.
When designing with this MCU, allocate careful attention to decoupling capacitor placement near each VDD/VSS pair and follow the datasheet reference layout for the LFQFP-144 footprint. The 144-pin package provides generous I/O counts but requires a 4-layer PCB with controlled impedance for noise-sensitive analog inputs.
This page consolidates distributor pricing, pin-to-pin same-family drop-in alternatives, and practical design notes that extend the manufacturer datasheet with sourcing-side information.
Drop-in-Alternativen für MC9S12XA512CFV – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S12XA512CFV (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Flash Memory, Core, EEPROM.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC9S12XA512CAGR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC9S12XA512CFUE
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MC9S12XEQ384CAG
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →S912XET512BMAGR
✅ Drop-In✓ Auf Lager
$6.6 / Stück
Datenblatt ansehen →MC9S12XDT512MAA
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MC9S12XA512CFV Grenzwerte & elektrische Eigenschaften
| Core | CPU12 (16-bit HCS12X) |
| Maximum CPU Clock | 40 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Gehäuse | 144-pin LQFP (LFQFP), 20x20 mm |
| Terminal Form | GULL WING |
| No. of Terminals | 144 |
| Package Code | LFQFP |
| Package Shape | SQUARE |
| Temperature Grade | INDUSTRIAL |
| Versorgungsspannung | 3.15 V to 5.5 V (single supply) |
| Betriebstemperatur | -40 C to +85 C |
| ADC | 16-channel, 10-bit (per family datasheet) |
| XGATE Coprocessor | Yes (per S12XA family) |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| Lead-Free | Yes |
MC9S12XA512CFV Pin-Konfiguration
| Pin 1 | TEST — Test mode pin (per datasheet) |
| Pin 2 | VDDR — Voltage regulator supply |
| Pin 3 | VDD — Digital supply voltage |
| Pin 4 | VSS — Digital ground |
| Pin 5 | VDDX — I/O supply voltage |
| Pin 6 | VSSX — I/O ground |
| Pin 7 | XCLKS — Clock mode select |
| Pin 8 | EXTAL — External oscillator input |
| Pin 9 | XTAL — External oscillator output |
| Pin 10 | RESET — Reset input (active low) |
| Pin 11 | BKGD — Background debug mode |
| Pin 12 | MODC — Mode selection |
| Pin 13 | PAD0 — Port AD bit 0 / AN0 |
| Pin 14 | PAD1 — Port AD bit 1 / AN1 |
| Pin 15 | PAD2 — Port AD bit 2 / AN2 |
| Pin 16 | PAD3 — Port AD bit 3 / AN3 |
| Pin 17 | PAD4 — Port AD bit 4 / AN4 |
| Pin 18 | PAD5 — Port AD bit 5 / AN5 |
| Pin 19 | PAD6 — Port AD bit 6 / AN6 |
| Pin 20 | PAD7 — Port AD bit 7 / AN7 |
| Pin 21 | PAD8 — Port AD bit 8 / AN8 |
| Pin 22 | PAD9 — Port AD bit 9 / AN9 |
| Pin 23 | PAD10 — Port AD bit 10 / AN10 |
| Pin 24 | PAD11 — Port AD bit 11 / AN11 |
| Pin 25 | PAD12 — Port AD bit 12 / AN12 |
| Pin 26 | PAD13 — Port AD bit 13 / AN13 |
| Pin 27 | PAD14 — Port AD bit 14 / AN14 |
| Pin 28 | PAD15 — Port AD bit 15 / AN15 |
| Pin 29 | VDDA — Analog supply voltage |
| Pin 30 | VSSA — Analog ground |
| Pin 31 | VRH — ADC reference high |
| Pin 32 | VRL — ADC reference low |
| Pin 33 | PWM0 — PWM channel 0 |
| Pin 34 | PWM1 — PWM channel 1 |
| Pin 35 | PWM2 — PWM channel 2 |
| Pin 36 | PWM3 — PWM channel 3 |
| Pin 37 | PWM4 — PWM channel 4 |
| Pin 38 | PWM5 — PWM channel 5 |
| Pin 39 | PWM6 — PWM channel 6 |
| Pin 40 | PWM7 — PWM channel 7 |
| Pin 41 | PP0 — Port P bit 0 / PWM8 |
| Pin 42 | PP1 — Port P bit 1 / PWM9 |
| Pin 43 | PP2 — Port P bit 2 |
| Pin 44 | PP3 — Port P bit 3 |
| Pin 45 | PP4 — Port P bit 4 |
| Pin 46 | PP5 — Port P bit 5 |
| Pin 47 | PP6 — Port P bit 6 |
| Pin 48 | PP7 — Port P bit 7 |
| Pin 49 | PTT0 — Port T bit 0 / IOC0 |
| Pin 50 | PTT1 — Port T bit 1 / IOC1 |
| Pin 51 | PTT2 — Port T bit 2 / IOC2 |
| Pin 52 | PTT3 — Port T bit 3 / IOC3 |
| Pin 53 | PTT4 — Port T bit 4 |
| Pin 54 | PTT5 — Port T bit 5 |
| Pin 55 | PTT6 — Port T bit 6 |
| Pin 56 | PTT7 — Port T bit 7 |
| Pin 57 | PTP0 — Port P bit 0 |
| Pin 58 | PTP1 — Port P bit 1 |
| Pin 59 | PTP2 — Port P bit 2 |
| Pin 60 | PTP3 — Port P bit 3 |
| Pin 61 | PTP4 — Port P bit 4 |
| Pin 62 | PTP5 — Port P bit 5 |
| Pin 63 | PTP6 — Port P bit 6 |
| Pin 64 | PTP7 — Port P bit 7 |
| Pin 65 | PTJ0 — Port J bit 0 |
| Pin 66 | PTJ1 — Port J bit 1 |
| Pin 67 | PTJ2 — Port J bit 2 |
| Pin 68 | PTJ3 — Port J bit 3 |
| Pin 69 | PTJ4 — Port J bit 4 |
| Pin 70 | PTJ5 — Port J bit 5 |
| Pin 71 | PTJ6 — Port J bit 6 |
| Pin 72 | PTJ7 — Port J bit 7 |
| Pin 73 | PM0 — Port M bit 0 / CAN0TX |
| Pin 74 | PM1 — Port M bit 1 / CAN0RX |
| Pin 75 | PM2 — Port M bit 2 / CAN1TX |
| Pin 76 | PM3 — Port M bit 3 / CAN1RX |
| Pin 77 | PM4 — Port M bit 4 |
| Pin 78 | PM5 — Port M bit 5 |
| Pin 79 | PM6 — Port M bit 6 |
| Pin 80 | PM7 — Port M bit 7 |
| Pin 81 | PS0 — Port S bit 0 / SPI0SCK |
| Pin 82 | PS1 — Port S bit 1 / SPI0MOSI |
| Pin 83 | PS2 — Port S bit 2 / SPI0MISO |
| Pin 84 | PS3 — Port S bit 3 / SPI0SS |
| Pin 85 | PS4 — Port S bit 4 / SCI0TX |
| Pin 86 | PS5 — Port S bit 5 / SCI0RX |
| Pin 87 | PS6 — Port S bit 6 / SCI1TX |
| Pin 88 | PS7 — Port S bit 7 / SCI1RX |
| Pin 89 | PQ0 — Port Q bit 0 / SPI1SCK |
| Pin 90 | PQ1 — Port Q bit 1 / SPI1MOSI |
| Pin 91 | PQ2 — Port Q bit 2 / SPI1MISO |
| Pin 92 | PQ3 — Port Q bit 3 / SPI1SS |
| Pin 93 | PQ4 — Port Q bit 4 |
| Pin 94 | PQ5 — Port Q bit 5 |
| Pin 95 | PQ6 — Port Q bit 6 |
| Pin 96 | PQ7 — Port Q bit 7 |
| Pin 97 | PR0 — Port R bit 0 / TIM0IOC0 |
| Pin 98 | PR1 — Port R bit 1 / TIM0IOC1 |
| Pin 99 | PR2 — Port R bit 2 / TIM0IOC2 |
| Pin 100 | PR3 — Port R bit 3 / TIM0IOC3 |
| Pin 101 | PR4 — Port R bit 4 / TIM0IOC4 |
| Pin 102 | PR5 — Port R bit 5 / TIM0IOC5 |
| Pin 103 | PR6 — Port R bit 6 / TIM0IOC6 |
| Pin 104 | PR7 — Port R bit 7 / TIM0IOC7 |
| Pin 105 | PU0 — Port U bit 0 |
| Pin 106 | PU1 — Port U bit 1 |
| Pin 107 | PU2 — Port U bit 2 |
| Pin 108 | PU3 — Port U bit 3 |
| Pin 109 | PU4 — Port U bit 4 |
| Pin 110 | PU5 — Port U bit 5 |
| Pin 111 | PU6 — Port U bit 6 |
| Pin 112 | PU7 — Port U bit 7 |
| Pin 113 | PV0 — Port V bit 0 |
| Pin 114 | PV1 — Port V bit 1 |
| Pin 115 | PV2 — Port V bit 2 |
| Pin 116 | PV3 — Port V bit 3 |
| Pin 117 | PV4 — Port V bit 4 |
| Pin 118 | PV5 — Port V bit 5 |
| Pin 119 | PV6 — Port V bit 6 |
| Pin 120 | PV7 — Port V bit 7 |
| Pin 121 | PW0 — Port W bit 0 |
| Pin 122 | PW1 — Port W bit 1 |
| Pin 123 | PW2 — Port W bit 2 |
| Pin 124 | PW3 — Port W bit 3 |
| Pin 125 | PW4 — Port W bit 4 |
| Pin 126 | PW5 — Port W bit 5 |
| Pin 127 | PW6 — Port W bit 6 |
| Pin 128 | PW7 — Port W bit 7 |
| Pin 129 | PE0 — Port E bit 0 / XIRQ |
| Pin 130 | PE1 — Port E bit 1 / IRQ |
| Pin 131 | PE2 — Port E bit 2 |
| Pin 132 | PE3 — Port E bit 3 |
| Pin 133 | PE4 — Port E bit 4 |
| Pin 134 | PE5 — Port E bit 5 |
| Pin 135 | PE6 — Port E bit 6 |
| Pin 136 | PE7 — Port E bit 7 |
| Pin 137 | PF0 — Port F bit 0 |
| Pin 138 | PF1 — Port F bit 1 |
| Pin 139 | PF2 — Port F bit 2 |
| Pin 140 | PF3 — Port F bit 3 |
| Pin 141 | PF4 — Port F bit 4 |
| Pin 142 | PF5 — Port F bit 5 |
| Pin 143 | PF6 — Port F bit 6 |
| Pin 144 | PF7 — Port F bit 7 |
Typische Anwendungen
MC9S12XA512CFV ist geeignet für 7 Anwendungs: Automotive Body Control Module (BCM), CAN Gateway / Network Bridge, Industrial HVAC Control Unit, Instrument Cluster MCU, LIN Master Node Controller, Battery Management System (BMS) Slave Controller, Industrial Sensor Hub / Data Aggregator.
Automotive Body Control Module (BCM)
The MC9S12XA512CFV is well-suited to automotive BCM controllers where its 512KB Flash supports full feature firmware including lighting, door, and wiper logic while the XGATE coprocessor offloads CAN message servicing for deterministic bus response under heavy traffic. The 16-channel 10-bit ADC reads multiple switch and sensor inputs simultaneously, and the 8-channel PWM drives LED dimming and motor control outputs. Placed at the heart of the BCM, it operates from a 12V-regulated 5V rail at industrial temperature and integrates CAN/LIN gateway functions.
Empfohlen
CAN Gateway / Network Bridge
The MC9S12XA512CFV's XGATE coprocessor and multiple msCAN modules make it ideal for CAN-to-CAN gateway and CAN-to-LIN bridge designs where message throughput is critical. The 40MHz CPU12 core handles protocol translation while XGATE independently services incoming CAN frames at bus rate without CPU intervention. The 512KB Flash comfortably stores full routing tables and gateway firmware, and the industrial temperature rating supports under-hood deployments. Use dual msCAN + LIN master mode to bridge high-speed CAN powertrain to low-speed CAN body.
Empfohlen
Industrial HVAC Control Unit
The MC9S12XA512CFV delivers sufficient compute and peripheral set for HVAC control boards driving multi-stage compressors, blower motors, and damper actuators. Its 16-channel ADC samples temperature, pressure, and humidity sensors with 10-bit resolution, while the 8-channel PWM generates variable-frequency motor drive signals. Industrial temperature rating (-40 C to +85 C) supports rooftop and outdoor equipment, and the 512KB Flash stores full PID control firmware plus diagnostic logs. Operates from a 24V-bus regulated 5V rail with low standby current.
Empfohlen
Instrument Cluster MCU
Instrument cluster designs leverage the MC9S12XA512CFV's PWM channels for gauge pointer drive, SPI for display controller interfacing, and CAN for vehicle network connectivity. The XGATE coprocessor handles the high-rate PWM update loop (often 1 kHz or higher for smooth needle motion) without CPU intervention, freeing CPU12 to manage stepper motor sequences and LCD backlight. Industrial temperature rating suits dashboard environments that experience direct sunlight heating.
Empfohlen
LIN Master Node Controller
LIN master nodes that orchestrate multiple slave devices (window regulators, mirror adjusters, seat controllers) benefit from the MC9S12XA512CFV's SCI/UART channels for LIN communication and PWM outputs for slave device control. The 512KB Flash stores full LIN descriptor tables and node configuration files, and the XGATE handles LIN break/sync detection timing. Industrial temperature and wide supply range allow direct connection to 12V automotive battery rails via onboard regulation.
Empfohlen
Battery Management System (BMS) Slave Controller
Within a distributed BMS architecture, the MC9S12XA512CFV can serve as a slave cell-monitoring controller that reads cell voltages through the 16-channel ADC, balances cells via PWM-driven switches, and reports pack status to the master BMS via CAN or SPI. Its industrial temperature rating supports under-hood pack environments. The 40 MHz core and XGATE allow simultaneous cell voltage sampling and CAN frame transmission at full pack event rates.
Empfohlen
Industrial Sensor Hub / Data Aggregator
Industrial IoT sensor hubs aggregating multiple field-bus inputs (CAN, SPI, analog) can use the MC9S12XA512CFV as a low-cost aggregation MCU. Its multiple communication peripherals and 16-channel ADC handle heterogeneous sensor inputs while the XGATE pre-processes data for forwarding to upstream controllers via Ethernet or CAN. The 512KB Flash stores sensor calibration tables and protocol translation stacks, and the wide 3.15V-5.5V supply range accepts battery and bus power directly.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S12XA512CFV – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S12XA512CAGR | MC9S12XA512CFUE | MC9S12XEQ384CAG | S912XET512BMAGR |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-pin LQFP (LFQFP) | 144-pin LQFP (LFQFP) - same | 144-pin LQFP (LFQFP) - same | 144-pin LQFP - same | 144-pin MAPBGA - different land pattern |
| Flash Memory | 512 KB | 512 KB | 512 KB | 384 KB (-25%) | 512 KB |
| CPU Clock | 40 MHz | 40 MHz | 40 MHz | 50 MHz | 50 MHz |
| Temperature Grade | Industrial (-40 to +85 C) | Automotive (AEC-Q100) | Industrial extended | Automotive (AEC-Q100) | Automotive (AEC-Q100) |
| XGATE Coprocessor | Yes | Yes | Yes | Yes (enhanced eQTM) | Yes |
| Family | S12XA | S12XA | S12XA | S12XE | S12XET |
| Approx Unit Price (qty 1) | 28.50 USD | 32.00 USD | 29.50 USD | 26.00 USD | 30.00 USD |
Wichtigste Unterscheidungsmerkmale
- Largest Flash density in S12XA family in LQFP-144 (vs. MC9S12XEQ384CAG)
- Industrial-grade vs automotive-grade cost savings (vs. MC9S12XA512CAGR)
- LQFP-144 vs MAPBGA footprint compatibility (vs. S912XET512BMAGR)
Designhinweise
The MC9S12XA512CFV requires a stable 5.0V (3.15-5.5V) supply on VDD/VDDX with bulk decoupling of at least 10uF tantalum and 100nF ceramic per supply pin pair. Place decoupling capacitors within 5mm of each VDD/VSS pair on the PCB. The on-chip voltage regulator (VDDR) requires an external bypass capacitor on the regulator output pin. Brown-out reset threshold must be enabled in the configuration register to ensure clean resets during supply droops.
The 144-pin LQFP (LFQFP) package has a 0.5mm pitch gull-wing lead. Follow JEDEC MS-026 land pattern recommendations with 0.27mm pad width and 1.5mm pad length. Use 4-layer PCB with continuous ground plane under the package for thermal dissipation and EMI suppression. Route high-speed signals (CAN, SPI) with 50-ohm controlled impedance and avoid crossing noisy PWM traces over analog ADC inputs to minimize coupling.
Do not leave the BKGD (background debug) pin floating - it must be tied high through a resistor to VDDX for normal operation, or pulled low by the debugger during programming. The MODC pin must be held high during reset for normal single-chip mode. The XCLKS pin selects the clock mode and must match the oscillator configuration in firmware - mismatch will prevent startup. Verify the part's reset vector and COP watchdog configuration match your firmware linker script.
Compliance-Informationen
Industrial temperature grade; not AEC-Q100 qualified - choose MC9S12XA512CAGR for automotive. RoHS and lead-free confirmed per NXP product page.
