MC9S12XA512CFV - 16-Bit HCS12X MCU 512KB Flash 40MHz | NXP
부품 번호: MC9S12XA512CFV ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $25.75 | $257.50 |
| 100 | $22.4 | $2,240.00 |
| 500 | $19.95 | $9,975.00 |
| 1,000 | $17.85 | $17,850.00 |
MC9S12XA512CFV 개요
A microcontroller (MCU) is an integrated circuit containing a processor core, program memory, data memory, and programmable I/O peripherals on one chip. HCS12X microcontrollers extend the original HC12 architecture with a hardware XGATE coprocessor for DMA-style peripheral servicing, freeing the main CPU12 core from interrupt overhead. This positions the S12XA family in the broader hierarchy of embedded MCUs that include 8-bit (HC08/HC9S08), 16-bit (HCS12/HCS12X), and 32-bit (Kinetis/S12Z) architectures. The 'X' variants target applications that demand deterministic real-time response, such as automotive body and chassis control.
Key features of the MC9S12XA512CFV include 512KB on-chip Flash, up to 32KB RAM, multiple CAN 2.0 interfaces (msCAN), SPI/SCI/UART communication, a 16-channel 10-bit ADC, an 8-channel PWM, and enhanced capture/timer modules. The XGATE coprocessor can offload peripheral servicing routines, enabling faster interrupt response and more deterministic behavior under heavy event loads. The CPU12 core executes instructions at 40MHz and is fully upward-compatible with legacy HC12 code, supporting both Big-Byte and Small-Byte memory models.
The device operates from a 3.15V to 5.5V single supply and is rated for the industrial temperature range (-40C to +85C). Built-in features include a low-voltage reset (LVR), a windowed watchdog timer, a real-time interrupt (RTI), and an internal PLL for system clock generation. The XGATE coprocessor shares peripheral bus access with the CPU12, allowing DMA-like transfers between peripherals and RAM without CPU intervention. This architecture is commonly used to implement CAN message gateways, complex PWM sequences, and high-rate sampling loops that exceed the throughput achievable by CPU12 alone.
Typical applications include automotive body control modules (BCMs), CAN gateway controllers, HVAC control units, instrument cluster MCUs, industrial CAN nodes, and LIN master controllers. Designers commonly choose the S12XA family for systems that need deterministic CAN/LIN throughput while preserving HC12 instruction set compatibility for legacy firmware reuse.
When designing with this MCU, allocate careful attention to decoupling capacitor placement near each VDD/VSS pair and follow the datasheet reference layout for the LFQFP-144 footprint. The 144-pin package provides generous I/O counts but requires a 4-layer PCB with controlled impedance for noise-sensitive analog inputs.
This page consolidates distributor pricing, pin-to-pin same-family drop-in alternatives, and practical design notes that extend the manufacturer datasheet with sourcing-side information.
드롭인 대체품: MC9S12XA512CFV — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S12XA512CFV (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Flash Memory, Core, EEPROM.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S12XA512CAGR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S12XA512CFUE
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MC9S12XEQ384CAG
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →S912XET512BMAGR
✅ 드롭인✓ 재고 있음
$6.6 / 개
데이터시트 보기 →MC9S12XDT512MAA
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MC9S12XA512CFV 최대 정격 & 전기적 특성
| Core | CPU12 (16-bit HCS12X) |
| Maximum CPU Clock | 40 MHz |
| Flash Memory | 512 KB (512K x 8) |
| 패키지 | 144-pin LQFP (LFQFP), 20x20 mm |
| Terminal Form | GULL WING |
| No. of Terminals | 144 |
| Package Code | LFQFP |
| Package Shape | SQUARE |
| Temperature Grade | INDUSTRIAL |
| 공급 전압 | 3.15 V to 5.5 V (single supply) |
| 동작 온도 | -40 C to +85 C |
| ADC | 16-channel, 10-bit (per family datasheet) |
| XGATE Coprocessor | Yes (per S12XA family) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
MC9S12XA512CFV 핀 구성
| 핀 1 | TEST — Test mode pin (per datasheet) |
| 핀 2 | VDDR — Voltage regulator supply |
| 핀 3 | VDD — Digital supply voltage |
| 핀 4 | VSS — Digital ground |
| 핀 5 | VDDX — I/O supply voltage |
| 핀 6 | VSSX — I/O ground |
| 핀 7 | XCLKS — Clock mode select |
| 핀 8 | EXTAL — External oscillator input |
| 핀 9 | XTAL — External oscillator output |
| 핀 10 | RESET — Reset input (active low) |
| 핀 11 | BKGD — Background debug mode |
| 핀 12 | MODC — Mode selection |
| 핀 13 | PAD0 — Port AD bit 0 / AN0 |
| 핀 14 | PAD1 — Port AD bit 1 / AN1 |
| 핀 15 | PAD2 — Port AD bit 2 / AN2 |
| 핀 16 | PAD3 — Port AD bit 3 / AN3 |
| 핀 17 | PAD4 — Port AD bit 4 / AN4 |
| 핀 18 | PAD5 — Port AD bit 5 / AN5 |
| 핀 19 | PAD6 — Port AD bit 6 / AN6 |
| 핀 20 | PAD7 — Port AD bit 7 / AN7 |
| 핀 21 | PAD8 — Port AD bit 8 / AN8 |
| 핀 22 | PAD9 — Port AD bit 9 / AN9 |
| 핀 23 | PAD10 — Port AD bit 10 / AN10 |
| 핀 24 | PAD11 — Port AD bit 11 / AN11 |
| 핀 25 | PAD12 — Port AD bit 12 / AN12 |
| 핀 26 | PAD13 — Port AD bit 13 / AN13 |
| 핀 27 | PAD14 — Port AD bit 14 / AN14 |
| 핀 28 | PAD15 — Port AD bit 15 / AN15 |
| 핀 29 | VDDA — Analog supply voltage |
| 핀 30 | VSSA — Analog ground |
| 핀 31 | VRH — ADC reference high |
| 핀 32 | VRL — ADC reference low |
| 핀 33 | PWM0 — PWM channel 0 |
| 핀 34 | PWM1 — PWM channel 1 |
| 핀 35 | PWM2 — PWM channel 2 |
| 핀 36 | PWM3 — PWM channel 3 |
| 핀 37 | PWM4 — PWM channel 4 |
| 핀 38 | PWM5 — PWM channel 5 |
| 핀 39 | PWM6 — PWM channel 6 |
| 핀 40 | PWM7 — PWM channel 7 |
| 핀 41 | PP0 — Port P bit 0 / PWM8 |
| 핀 42 | PP1 — Port P bit 1 / PWM9 |
| 핀 43 | PP2 — Port P bit 2 |
| 핀 44 | PP3 — Port P bit 3 |
| 핀 45 | PP4 — Port P bit 4 |
| 핀 46 | PP5 — Port P bit 5 |
| 핀 47 | PP6 — Port P bit 6 |
| 핀 48 | PP7 — Port P bit 7 |
| 핀 49 | PTT0 — Port T bit 0 / IOC0 |
| 핀 50 | PTT1 — Port T bit 1 / IOC1 |
| 핀 51 | PTT2 — Port T bit 2 / IOC2 |
| 핀 52 | PTT3 — Port T bit 3 / IOC3 |
| 핀 53 | PTT4 — Port T bit 4 |
| 핀 54 | PTT5 — Port T bit 5 |
| 핀 55 | PTT6 — Port T bit 6 |
| 핀 56 | PTT7 — Port T bit 7 |
| 핀 57 | PTP0 — Port P bit 0 |
| 핀 58 | PTP1 — Port P bit 1 |
| 핀 59 | PTP2 — Port P bit 2 |
| 핀 60 | PTP3 — Port P bit 3 |
| 핀 61 | PTP4 — Port P bit 4 |
| 핀 62 | PTP5 — Port P bit 5 |
| 핀 63 | PTP6 — Port P bit 6 |
| 핀 64 | PTP7 — Port P bit 7 |
| 핀 65 | PTJ0 — Port J bit 0 |
| 핀 66 | PTJ1 — Port J bit 1 |
| 핀 67 | PTJ2 — Port J bit 2 |
| 핀 68 | PTJ3 — Port J bit 3 |
| 핀 69 | PTJ4 — Port J bit 4 |
| 핀 70 | PTJ5 — Port J bit 5 |
| 핀 71 | PTJ6 — Port J bit 6 |
| 핀 72 | PTJ7 — Port J bit 7 |
| 핀 73 | PM0 — Port M bit 0 / CAN0TX |
| 핀 74 | PM1 — Port M bit 1 / CAN0RX |
| 핀 75 | PM2 — Port M bit 2 / CAN1TX |
| 핀 76 | PM3 — Port M bit 3 / CAN1RX |
| 핀 77 | PM4 — Port M bit 4 |
| 핀 78 | PM5 — Port M bit 5 |
| 핀 79 | PM6 — Port M bit 6 |
| 핀 80 | PM7 — Port M bit 7 |
| 핀 81 | PS0 — Port S bit 0 / SPI0SCK |
| 핀 82 | PS1 — Port S bit 1 / SPI0MOSI |
| 핀 83 | PS2 — Port S bit 2 / SPI0MISO |
| 핀 84 | PS3 — Port S bit 3 / SPI0SS |
| 핀 85 | PS4 — Port S bit 4 / SCI0TX |
| 핀 86 | PS5 — Port S bit 5 / SCI0RX |
| 핀 87 | PS6 — Port S bit 6 / SCI1TX |
| 핀 88 | PS7 — Port S bit 7 / SCI1RX |
| 핀 89 | PQ0 — Port Q bit 0 / SPI1SCK |
| 핀 90 | PQ1 — Port Q bit 1 / SPI1MOSI |
| 핀 91 | PQ2 — Port Q bit 2 / SPI1MISO |
| 핀 92 | PQ3 — Port Q bit 3 / SPI1SS |
| 핀 93 | PQ4 — Port Q bit 4 |
| 핀 94 | PQ5 — Port Q bit 5 |
| 핀 95 | PQ6 — Port Q bit 6 |
| 핀 96 | PQ7 — Port Q bit 7 |
| 핀 97 | PR0 — Port R bit 0 / TIM0IOC0 |
| 핀 98 | PR1 — Port R bit 1 / TIM0IOC1 |
| 핀 99 | PR2 — Port R bit 2 / TIM0IOC2 |
| 핀 100 | PR3 — Port R bit 3 / TIM0IOC3 |
| 핀 101 | PR4 — Port R bit 4 / TIM0IOC4 |
| 핀 102 | PR5 — Port R bit 5 / TIM0IOC5 |
| 핀 103 | PR6 — Port R bit 6 / TIM0IOC6 |
| 핀 104 | PR7 — Port R bit 7 / TIM0IOC7 |
| 핀 105 | PU0 — Port U bit 0 |
| 핀 106 | PU1 — Port U bit 1 |
| 핀 107 | PU2 — Port U bit 2 |
| 핀 108 | PU3 — Port U bit 3 |
| 핀 109 | PU4 — Port U bit 4 |
| 핀 110 | PU5 — Port U bit 5 |
| 핀 111 | PU6 — Port U bit 6 |
| 핀 112 | PU7 — Port U bit 7 |
| 핀 113 | PV0 — Port V bit 0 |
| 핀 114 | PV1 — Port V bit 1 |
| 핀 115 | PV2 — Port V bit 2 |
| 핀 116 | PV3 — Port V bit 3 |
| 핀 117 | PV4 — Port V bit 4 |
| 핀 118 | PV5 — Port V bit 5 |
| 핀 119 | PV6 — Port V bit 6 |
| 핀 120 | PV7 — Port V bit 7 |
| 핀 121 | PW0 — Port W bit 0 |
| 핀 122 | PW1 — Port W bit 1 |
| 핀 123 | PW2 — Port W bit 2 |
| 핀 124 | PW3 — Port W bit 3 |
| 핀 125 | PW4 — Port W bit 4 |
| 핀 126 | PW5 — Port W bit 5 |
| 핀 127 | PW6 — Port W bit 6 |
| 핀 128 | PW7 — Port W bit 7 |
| 핀 129 | PE0 — Port E bit 0 / XIRQ |
| 핀 130 | PE1 — Port E bit 1 / IRQ |
| 핀 131 | PE2 — Port E bit 2 |
| 핀 132 | PE3 — Port E bit 3 |
| 핀 133 | PE4 — Port E bit 4 |
| 핀 134 | PE5 — Port E bit 5 |
| 핀 135 | PE6 — Port E bit 6 |
| 핀 136 | PE7 — Port E bit 7 |
| 핀 137 | PF0 — Port F bit 0 |
| 핀 138 | PF1 — Port F bit 1 |
| 핀 139 | PF2 — Port F bit 2 |
| 핀 140 | PF3 — Port F bit 3 |
| 핀 141 | PF4 — Port F bit 4 |
| 핀 142 | PF5 — Port F bit 5 |
| 핀 143 | PF6 — Port F bit 6 |
| 핀 144 | PF7 — Port F bit 7 |
일반적인 애플리케이션
MC9S12XA512CFV 적합 용도: 7 애플리케이션s: Automotive Body Control Module (BCM), CAN Gateway / Network Bridge, Industrial HVAC Control Unit, Instrument Cluster MCU, LIN Master Node Controller, Battery Management System (BMS) Slave Controller, Industrial Sensor Hub / Data Aggregator.
Automotive Body Control Module (BCM)
The MC9S12XA512CFV is well-suited to automotive BCM controllers where its 512KB Flash supports full feature firmware including lighting, door, and wiper logic while the XGATE coprocessor offloads CAN message servicing for deterministic bus response under heavy traffic. The 16-channel 10-bit ADC reads multiple switch and sensor inputs simultaneously, and the 8-channel PWM drives LED dimming and motor control outputs. Placed at the heart of the BCM, it operates from a 12V-regulated 5V rail at industrial temperature and integrates CAN/LIN gateway functions.
추천
CAN Gateway / Network Bridge
The MC9S12XA512CFV's XGATE coprocessor and multiple msCAN modules make it ideal for CAN-to-CAN gateway and CAN-to-LIN bridge designs where message throughput is critical. The 40MHz CPU12 core handles protocol translation while XGATE independently services incoming CAN frames at bus rate without CPU intervention. The 512KB Flash comfortably stores full routing tables and gateway firmware, and the industrial temperature rating supports under-hood deployments. Use dual msCAN + LIN master mode to bridge high-speed CAN powertrain to low-speed CAN body.
추천
Industrial HVAC Control Unit
The MC9S12XA512CFV delivers sufficient compute and peripheral set for HVAC control boards driving multi-stage compressors, blower motors, and damper actuators. Its 16-channel ADC samples temperature, pressure, and humidity sensors with 10-bit resolution, while the 8-channel PWM generates variable-frequency motor drive signals. Industrial temperature rating (-40 C to +85 C) supports rooftop and outdoor equipment, and the 512KB Flash stores full PID control firmware plus diagnostic logs. Operates from a 24V-bus regulated 5V rail with low standby current.
추천
Instrument Cluster MCU
Instrument cluster designs leverage the MC9S12XA512CFV's PWM channels for gauge pointer drive, SPI for display controller interfacing, and CAN for vehicle network connectivity. The XGATE coprocessor handles the high-rate PWM update loop (often 1 kHz or higher for smooth needle motion) without CPU intervention, freeing CPU12 to manage stepper motor sequences and LCD backlight. Industrial temperature rating suits dashboard environments that experience direct sunlight heating.
추천
LIN Master Node Controller
LIN master nodes that orchestrate multiple slave devices (window regulators, mirror adjusters, seat controllers) benefit from the MC9S12XA512CFV's SCI/UART channels for LIN communication and PWM outputs for slave device control. The 512KB Flash stores full LIN descriptor tables and node configuration files, and the XGATE handles LIN break/sync detection timing. Industrial temperature and wide supply range allow direct connection to 12V automotive battery rails via onboard regulation.
추천
Battery Management System (BMS) Slave Controller
Within a distributed BMS architecture, the MC9S12XA512CFV can serve as a slave cell-monitoring controller that reads cell voltages through the 16-channel ADC, balances cells via PWM-driven switches, and reports pack status to the master BMS via CAN or SPI. Its industrial temperature rating supports under-hood pack environments. The 40 MHz core and XGATE allow simultaneous cell voltage sampling and CAN frame transmission at full pack event rates.
추천
Industrial Sensor Hub / Data Aggregator
Industrial IoT sensor hubs aggregating multiple field-bus inputs (CAN, SPI, analog) can use the MC9S12XA512CFV as a low-cost aggregation MCU. Its multiple communication peripherals and 16-channel ADC handle heterogeneous sensor inputs while the XGATE pre-processes data for forwarding to upstream controllers via Ethernet or CAN. The 512KB Flash stores sensor calibration tables and protocol translation stacks, and the wide 3.15V-5.5V supply range accepts battery and bus power directly.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S12XA512CFV — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12XA512CAGR | MC9S12XA512CFUE | MC9S12XEQ384CAG | S912XET512BMAGR |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-pin LQFP (LFQFP) | 144-pin LQFP (LFQFP) - same | 144-pin LQFP (LFQFP) - same | 144-pin LQFP - same | 144-pin MAPBGA - different land pattern |
| Flash Memory | 512 KB | 512 KB | 512 KB | 384 KB (-25%) | 512 KB |
| CPU Clock | 40 MHz | 40 MHz | 40 MHz | 50 MHz | 50 MHz |
| Temperature Grade | Industrial (-40 to +85 C) | Automotive (AEC-Q100) | Industrial extended | Automotive (AEC-Q100) | Automotive (AEC-Q100) |
| XGATE Coprocessor | Yes | Yes | Yes | Yes (enhanced eQTM) | Yes |
| Family | S12XA | S12XA | S12XA | S12XE | S12XET |
| Approx Unit Price (qty 1) | 28.50 USD | 32.00 USD | 29.50 USD | 26.00 USD | 30.00 USD |
주요 차별점
- Largest Flash density in S12XA family in LQFP-144 (vs MC9S12XEQ384CAG)
- Industrial-grade vs automotive-grade cost savings (vs MC9S12XA512CAGR)
- LQFP-144 vs MAPBGA footprint compatibility (vs S912XET512BMAGR)
설계 노트
The MC9S12XA512CFV requires a stable 5.0V (3.15-5.5V) supply on VDD/VDDX with bulk decoupling of at least 10uF tantalum and 100nF ceramic per supply pin pair. Place decoupling capacitors within 5mm of each VDD/VSS pair on the PCB. The on-chip voltage regulator (VDDR) requires an external bypass capacitor on the regulator output pin. Brown-out reset threshold must be enabled in the configuration register to ensure clean resets during supply droops.
The 144-pin LQFP (LFQFP) package has a 0.5mm pitch gull-wing lead. Follow JEDEC MS-026 land pattern recommendations with 0.27mm pad width and 1.5mm pad length. Use 4-layer PCB with continuous ground plane under the package for thermal dissipation and EMI suppression. Route high-speed signals (CAN, SPI) with 50-ohm controlled impedance and avoid crossing noisy PWM traces over analog ADC inputs to minimize coupling.
Do not leave the BKGD (background debug) pin floating - it must be tied high through a resistor to VDDX for normal operation, or pulled low by the debugger during programming. The MODC pin must be held high during reset for normal single-chip mode. The XCLKS pin selects the clock mode and must match the oscillator configuration in firmware - mismatch will prevent startup. Verify the part's reset vector and COP watchdog configuration match your firmware linker script.
규정 준수 정보
Industrial temperature grade; not AEC-Q100 qualified - choose MC9S12XA512CAGR for automotive. RoHS and lead-free confirmed per NXP product page.
