MCF52210CAE80 - 32-Bit 80MHz 64KB Flash MCU | NXP
Teilenummer: MCF52210CAE80 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MCF52210CAE80 Übersicht
A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripheral interfaces on one device. The MCF52210CAE80 is specifically a ColdFire V2 MCU: a 32-bit RISC-based embedded controller designed to execute firmware, coordinate hardware peripherals, and manage real-time control tasks. In the product hierarchy, ColdFire V2 belongs to the MCU, embedded processor, and semiconductor categories, while its flash memory stores firmware directly on the chip.
The primary verified features are a maximum clock frequency of 80 MHz, 64 KB organized as 64K x 8 bits of flash, and a 64-pin low-profile quad flat pack. The family also provides integrated USB OTG, up to three UARTs, one SPI interface, and two I2C interfaces according to the available family description. These peripherals reduce external component count in designs requiring USB connectivity, serial sensors, or industrial communications.
The ColdFire V2 core provides 32-bit processing while retaining a compact embedded-control architecture. USB OTG can support a USB peripheral or host role, depending on the complete system design and firmware. UART, SPI, and I2C interfaces allow the MCU to connect to sensors, transceivers, memory devices, and display controllers. Exact peripheral multiplexing, interrupt behavior, and electrical limits should be confirmed against the manufacturer datasheet before schematic capture.
Typical applications include USB-to-serial equipment, embedded data acquisition, test and measurement fixtures, peripheral controllers, and industrial automation modules. The 64 KB flash capacity may also suit control firmware, boot logic, or communication protocol stacks when application requirements remain modest. The 10 mm x 10 mm LQFP package is inspectable and compatible with conventional leaded-board assembly processes.
Designers should verify the complete pin multiplexing, power requirements, clock configuration, and unused-pin treatment in the datasheet. Because the device is marked as End of Life by the NXP product page, long-term procurement and redesign planning should be treated as supply-risk activities. Validate the exact ordering suffix, package, and lifecycle status before committing a new production design.
Drop-in-Alternativen für MCF52210CAE80 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MCF52210CAE80 (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, Lifecycle Status, Maximum Clock Frequency, UART.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MCF52221CAE66
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MCF52212CAE50
✅ Drop-In✓ Auf Lager
$6.74 / Stück
Datenblatt ansehen →MCF52223CAF80
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MCF52210CAE80
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MCF52211CVM66
✅ Drop-In✓ Auf Lager
$7.05 / Stück
Datenblatt ansehen →MCF52210CAE80 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit microcontroller |
| Processor Core | ColdFire V2 |
| Maximale Taktfrequenz | 80 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Versorgungsspannung | 3.3 V |
| Integrated USB | USB On-The-Go |
| UART Interfaces | Up to 3 |
| SPI Interfaces | 1 |
| I2C Interfaces | 2 |
| Gehäuse | 64-LQFP (10 x 10 mm) |
| Pin-Anzahl | 64 pins |
| Montageart | Surface mount |
| Architecture | 32-bit |
| Series | MCF5221x |
| Lebenszyklusstatus | End of Life |
| Manufacturer | NXP Semiconductors |
MCF52210CAE80 64-lqfp (10 x 10 mm) Pinbelegungsleitfaden
Pinbelegung für MCF52210CAE80 (64-lqfp (10 x 10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MCF52210CAE80.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MCF52210CAE80 ist geeignet für 6 Anwendungs: USB-to-Serial Embedded Control, Industrial Peripheral Controller, USB Data-Acquisition Module, Test and Measurement Fixture Controller, Serial Sensor Hub, Embedded Communication Appliance.
USB-to-Serial Embedded Control
The MCF52210CAE80 fits USB-connected embedded control designs because the verified family information identifies integrated USB On-The-Go capability alongside three UARTs. A board can use the MCU to manage USB traffic, bridge serial data, and supervise local control functions without adding a separate USB interface controller. The 80 MHz ColdFire V2 core provides processing headroom for protocol handling and control logic, while 64 KB of flash stores firmware. Designers should confirm USB signal routing, power requirements, and device-versus-host role support in the exact datasheet before layout release.
Empfohlen
Industrial Peripheral Controller
The MCF52210CAE80 is appropriate for an industrial peripheral controller when the system needs 32-bit embedded processing and multiple serial interfaces. Its verified MCU5221x family description lists up to three UARTs, one SPI, and two I2C interfaces, allowing the controller to communicate with sensors, actuators, and external transceivers. The 80 MHz clock can support time-critical coordination, and the 64 KB flash provides room for application firmware. Confirm industrial temperature, ESD, isolation, and grounding requirements separately because those ratings are not provided in the verified data.
Empfohlen
USB Data-Acquisition Module
For a compact data-acquisition module, the MCF52210CAE80 can coordinate sensor inputs and transfer collected data through USB. The verified 80 MHz ColdFire V2 core and 32-bit architecture are useful for sampling control, buffering, and protocol processing, while UART, SPI, and I2C provide connection paths to sensors and converters. USB OTG can simplify host-connected instrumentation, subject to the exact role and electrical requirements in the datasheet. Use the 64 KB flash carefully when firmware, calibration data, and protocol handlers all share the device memory.
Empfohlen
Test and Measurement Fixture Controller
The MCF52210CAE80 can serve as the control processor in a test fixture that coordinates USB connectivity and several external instruments. Its 32-bit ColdFire V2 core operates at 80 MHz, providing a basis for sequencing, status handling, and communication firmware. Three UARTs may connect to legacy test equipment, while SPI and I2C can support ADC boards, sensors, and configuration peripherals. The 64-LQFP package is inspectable for prototype and moderate-production assembly. Exact pin multiplexing and timing margins should be validated before schematic and firmware release.
Empfohlen
Serial Sensor Hub
The MCF52210CAE80 is suitable as a serial sensor hub because the verified family description provides multiple UARTs plus SPI and I2C interfaces. The MCU can aggregate measurements from sensors on different buses, apply local filtering or threshold logic, and expose the result through USB. The 80 MHz clock supports efficient interrupt-driven coordination, while 64 KB flash can hold the hub firmware. Validate pin multiplexing, bus voltage levels, pull-up requirements, and peripheral sharing for the selected 64-pin package before schematic completion.
Empfohlen
Embedded Communication Appliance
The MCF52210CAE80 can support a communication appliance that combines USB connectivity with serial device management. Its 32-bit ColdFire V2 core can run communication stacks and supervisory logic, while the available UART, SPI, and I2C interfaces provide paths to radios, memory, and configuration devices. The 80 MHz operating speed and 64 KB flash make the part suitable for modest embedded workloads rather than high-memory gateways. Confirm USB transceiver requirements, power sequencing, and firmware dependencies in the manufacturer documentation before selecting it for a new production platform.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MCF52210CAE80 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MCF52221CAE66 | MCF52212CAE50 | MCF52223CAF80 | MCF52210CAE80 | MCF52211CVM66 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP; exact dimensions not verified | 64-LQFP; exact dimensions not verified | 64-LQFP; exact dimensions not verified | 64-LQFP (10 x 10 mm) | 64-LQFP; exact dimensions not verified |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Wichtigste Unterscheidungsmerkmale
- Exact target identity (vs. MCF52221CAE66)
- Documented package identity (vs. MCF52223CAF80)
- Integrated connectivity emphasis (vs. MCF52212CAE50)
- Procurement status (vs. MCF52211CVM66)
Designhinweise
Do not treat a related MCF522 device as a drop-in replacement solely because it appears in a 64-LQFP package. The verified data confirms the target uses a 64-LQFP, 10 x 10 mm package, but it does not establish identical pin mapping, voltage levels, clock limits, memory, or peripheral multiplexing for the alternatives. Compare every pin against the official datasheet and validate reset, debug, USB, and unused-pin behavior before PCB reuse.
The verified source lists the MCU as a 3.3 V device, but it does not provide the complete operating-voltage range or supply-current limits. Use the manufacturer power specifications to select the regulator, decoupling network, and sequencing. Place required bulk and high-frequency capacitors at the pins identified in the datasheet, and verify USB transceiver and external-interface power domains separately rather than assuming all rails are identical.
Follow the exact 64-LQFP land pattern and pin numbering from the manufacturer package drawing. Keep USB differential routing short and controlled, provide the specified return-path continuity, and keep noisy switching or power-conversion nodes away from sensitive analog and communication lines. Confirm thermal pad requirements, lead length, solder mask, and assembly clearance for the 10 mm x 10 mm package before releasing the board.
The family supports USB OTG, UART, SPI, and I2C, so the final pin mux can affect signal routing and test access. Freeze the peripheral allocation in firmware and hardware configuration, then verify that each selected interface has the required pin, direction, pull-up, pull-down, and alternate-function settings. Do not infer a pin's electrical state from the connector or bus name alone.
The verified data does not provide thermal resistance, maximum junction temperature, or power dissipation for this MCU. Calculate thermal performance from the actual supply voltage, I/O loading, clock activity, and PCB copper using manufacturer limits. Because the part is End of Life, document the tested thermal condition and obtain a lifecycle-aware replacement plan before long-life production deployment.
Compliance-Informationen
The supplied verified data does not provide product-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. These fields remain unknown rather than inferred.
