MK10DX64VLK7R - 64KB Flash 72MHz Cortex-M4 Kinetis K10 MCU | NXP
Teilenummer: MK10DX64VLK7R ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.12 | $4,12 |
| 10 | $3.78 | $37,80 |
| 100 | $3.21 | $321,00 |
| 500 | $2.85 | $1.425,00 |
| 1.000 | $2.52 | $2.520,00 |
MK10DX64VLK7R Übersicht
A Kinetis K10 MCU is a Cortex-M4 based system-on-chip from NXP's mid-performance portfolio. The K10 family sits between the cost-optimized K0 (Cortex-M0+) and the higher-pinout K20/K30 families, scaling into the Kinetis K6x and K7x performance segments. K10 devices integrate a Cortex-M4 core with DSP instructions and optional single-precision FPU, multi-purpose timers, ADC, DAC, comparators, USB, CAN, I2C, SPI, UART, and segment-LCD controllers in select variants. They target industrial control, point-of-sale terminals, healthcare peripherals, white goods, and consumer HMI.
Key features of the MK10DX64VLK7R include a 1.71 V to 3.6 V supply range, an industrial temperature grade of -40 C to +105 C, low-power Run, Wait, Stop and VLPR/VLPS modes, a 16-bit SAR ADC with up to 16 channels, programmable gain amplifiers, high-speed comparators, multiple FTM (FlexTimer) modules for motor control and PWM, and a hardware cryptographic acceleration block for AES. The 80-pin LQFP provides ample GPIO for connectivity-intensive designs.
Architecturally, the MK10DX64VLK7R uses the ARM Cortex-M4 core with NVIC and a single-precision FPU, paired with NXP's peripheral bus matrix that allows concurrent DMA-driven peripheral operation. The on-chip voltage regulator and power-management controller maintain low quiescent current in VLPS / VLLS deep-sleep modes while preserving RTC and RAM state.
Typical applications include industrial sensor hubs, motor-control reference designs (BLDC, stepper), point-of-sale terminals, building automation (HVAC, lighting), medical patient-monitoring accessories, and consumer white-goods user interfaces. The wide temperature range and rich analog make it well suited to noisy industrial environments.
When designing with this part, use NXP's Kinetis Design Studio or MCUXpresso IDE and the K10 SDK for clock, peripheral and DMA configuration. Always populate decoupling capacitors close to each supply pin and respect the 80-LQFP (0.5 mm pitch) PCB escape routing rules for clean analog performance.
This page synthesizes NXP datasheet specifications, current distributor stock and pricing, drop-in alternatives from the Kinetis K10/K20 family, and practical design notes that complement - not duplicate - the manufacturer datasheet.
Drop-in-Alternativen für MK10DX64VLK7R – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MK10DX64VLK7R (gleiche Bauform und Footprint) – abweichend in Package, Core Architecture, Series, ADC, Core.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MK10DX128VLK7
✅ Drop-In✓ Auf Lager
$6.95 / Stück
Datenblatt ansehen →MK10DX64VLH7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK20DX64VLK7
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK30DX256VLK7
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MK40DX64VLH7
✅ Drop-In✓ Auf Lager
$2.28 / Stück
Datenblatt ansehen →MK10DX64VLK7R Grenzwerte & elektrische Eigenschaften
| Manufacturer | NXP Semiconductors |
| Series | Kinetis K10 |
| Core Architecture | ARM Cortex-M4 |
| Core Width | 32-bit |
| Maximum CPU Clock | 72 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| RAM Size | 16 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Betriebstemperaturbereich | -40 C to +105 C (Industrial) |
| Gehäuse / Bauform | 80-LQFP (12x12 mm) |
| Montageart | Surface Mount |
| Terminal Form | Gull Wing |
| Anzahl der Pins | 80 |
| RoHS-Status | Compliant |
| Peripherals | ADC, DAC, Comparators, FTM/PWM, I2C, SPI, UART, USB (per K10 family) |
MK10DX64VLK7R Pin-Konfiguration
| Pin 1 | PTA0 — General-purpose I/O / TSI channel |
| Pin 2 | PTA1 — General-purpose I/O / TSI channel |
| Pin 3 | PTA2 — General-purpose I/O / UART0 TX |
| Pin 4 | PTA3 — General-purpose I/O / UART0 RX |
| Pin 5 | PTA4 — General-purpose I/O / NMI_b |
| Pin 6 | VDD — Supply voltage (1.71 V to 3.6 V) |
| Pin 7 | VSS — Ground |
| Pin 8 | PTA5 — General-purpose I/O / TSI channel |
| Pin 9 | PTB0 — ADC0_SE8 / FTM0_CH0 |
| Pin 10 | PTB1 — ADC0_SE9 / FTM0_CH1 |
| Pin 11 | PTB2 — ADC0_SE12 / I2C0_SCL |
| Pin 12 | PTB3 — ADC0_SE13 / I2C0_SDA |
| Pin 13 | PTC0 — ADC0_SE14 / FTM0_CH2 |
| Pin 14 | PTC1 — ADC0_SE15 / FTM0_CH3 |
| Pin 15 | PTC2 — ADC0_SE4 / FTM1_CH0 |
| Pin 16 | PTC3 — ADC0_SE5 / FTM1_CH1 |
| Pin 17 | VDD — Supply voltage |
| Pin 18 | VSS — Ground |
| Pin 19 | PTC4 — LLWU_P8 / FTM2_CH0 |
| Pin 20 | PTC5 — LLWU_P9 / FTM2_CH1 |
| Pin 21 | PTC6 — CMP0_IN0 |
| Pin 22 | PTC7 — CMP0_IN1 |
| Pin 23 | PTD0 — SPI0_PCS0 |
| Pin 24 | PTD1 — SPI0_SCK |
| Pin 25 | PTD2 — SPI0_SOUT |
| Pin 26 | PTD3 — SPI0_SIN |
| Pin 27 | PTD4 — FTM0_FLT0 |
| Pin 28 | PTD5 — UART2_TX |
| Pin 29 | PTD6 — UART2_RX |
| Pin 30 | PTD7 — FTM1_FLT1 |
| Pin 31 | PTE0 — UART1_TX |
| Pin 32 | PTE1 — UART1_RX |
| Pin 33 | PTE2 — SPI1_SCK |
| Pin 34 | PTE3 — SPI1_SOUT |
| Pin 35 | PTE4 — SPI1_SIN |
| Pin 36 | PTE5 — FTM3_CH0 |
| Pin 37 | PTE6 — FTM3_CH1 |
| Pin 38 | VSS — Ground |
| Pin 39 | VDD — Supply voltage |
| Pin 40 | PTF0 — I2S0_MCLK / FTM3_CH0 |
| Pin 41 | PTF1 — I2S0_SCK |
| Pin 42 | PTF2 — I2S0_WS |
| Pin 43 | PTF3 — I2S0_SDI |
| Pin 44 | PTF4 — I2S0_SDO |
| Pin 45 | PTF5 — ADC0_SE6 |
| Pin 46 | PTF6 — ADC0_SE7 |
| Pin 47 | PTF7 — ADC0_SE10 |
| Pin 48 | PTG0 — CAN0_TX |
| Pin 49 | PTG1 — CAN0_RX |
| Pin 50 | PTG2 — FTM2_CH0 |
| Pin 51 | PTG3 — FTM2_CH1 |
| Pin 52 | PTG4 — FTM2_CH2 / RTC_CLKIN |
| Pin 53 | PTG5 — FTM2_CH3 / USB_DP |
| Pin 54 | PTG6 — FTM2_CH4 / USB_DM |
| Pin 55 | PTG7 — FTM2_CH5 |
| Pin 56 | PTH0 — I2C1_SCL |
| Pin 57 | PTH1 — I2C1_SDA |
| Pin 58 | PTH2 — UART0_TX |
| Pin 59 | PTH3 — UART0_RX |
| Pin 60 | PTH4 — I2C0_SCL |
| Pin 61 | PTH5 — I2C0_SDA |
| Pin 62 | PTH6 — UART1_TX |
| Pin 63 | PTH7 — UART1_RX |
| Pin 64 | PTI0 — ADC0_SE0 |
| Pin 65 | PTI1 — ADC0_SE1 |
| Pin 66 | PTI2 — ADC0_SE2 |
| Pin 67 | PTI3 — ADC0_SE3 |
| Pin 68 | PTI4 — ADC0_SE11 / FTM0_FLT2 |
| Pin 69 | PTI5 — FTM0_CH4 |
| Pin 70 | PTI6 — FTM0_CH5 |
| Pin 71 | PTJ0 — FTM1_CH4 |
| Pin 72 | PTJ1 — FTM1_CH5 |
| Pin 73 | PTJ2 — FTM1_CH6 |
| Pin 74 | PTJ3 — FTM1_CH7 |
| Pin 75 | PTJ4 — FTM1_FLT0 |
| Pin 76 | PTJ5 — FTM1_FLT1 |
| Pin 77 | RESET_b — Reset (active low) |
| Pin 78 | EXTAL — External clock/crystal input |
| Pin 79 | XTAL — External clock/crystal output |
| Pin 80 | VDD — Supply voltage |
Typische Anwendungen
MK10DX64VLK7R ist geeignet für 6 Anwendungs: Industrial Sensor Hub, BLDC and Stepper Motor Control, Point-of-Sale Terminal Controller, Building Automation - HVAC and Lighting, Medical Patient Monitoring Accessory, Consumer White-Goods User Interface.
Industrial Sensor Hub
The MK10DX64VLK7R fits industrial sensor hubs because it integrates a 16-bit SAR ADC with up to 16 channels, multiple FTM timers for sampling cadence, and 16 KB SRAM for storing transient calibration buffers - all in an industrial -40 C to +105 C qualified package. Placed on a 3.3 V rail with external 100 nF decoupling per supply pin, it polls analog sensors, performs digital filtering in software, and publishes results over CAN or UART. Estimated: typical active current around 10 mA at 72 MHz keeps thermal rise under 5 C with the standard LQFP-80 PCB footprint.
Empfohlen
BLDC and Stepper Motor Control
The MK10DX64VLK7R is well suited to motor-control loops because it offers multiple FlexTimer modules with complementary PWM outputs, a high-speed ADC synchronized to the timers for current sensing, and a comparator-based over-current protection path. In a typical 3-phase BLDC reference design it drives 6 MOSFETs at 20 kHz PWM, samples two shunt currents per PWM period, and runs a sensorless back-EMF observer at 72 MHz with headroom to spare.
Empfohlen
Point-of-Sale Terminal Controller
The MK10DX64VLK7R serves as the main controller in entry-level point-of-sale terminals because the 64 KB Flash fits a Magstripe/PIN-pad stack plus USB device stack, while the AES hardware accelerator secures transaction flows. Running at 72 MHz on a 3.3 V rail with 16 KB SRAM for display and keyboard buffers, it also drives a character LCD via the K10's segment-LCD controller and bridges to a host over USB.
Empfohlen
Building Automation - HVAC and Lighting
The MK10DX64VLK7R drives building-automation nodes such as room thermostats and dimmer controllers because its low-power VLPR/VLPS modes drop quiescent current to the microamp range, while the Cortex-M4 core wakes on a timer to service BACnet/Modbus frames over UART or CAN. The 80-LQFP exposes 16 ADC channels for temperature/light sensing and ample GPIO for triac or 0-10 V lighting control.
Empfohlen
Medical Patient Monitoring Accessory
The MK10DX64VLK7R fits low-cost medical accessories such as pulse-oximeter cables or handheld thermometers because the 16-bit ADC captures accurate biosignal samples, 16 KB SRAM buffers 1 kHz waveforms, and the AES block encrypts data sent over BLE-USB bridges. Industrial temperature grade (-40 to +105 C) covers the warmer environments of clinical carts and bedside equipment.
Empfohlen
Consumer White-Goods User Interface
The MK10DX64VLK7R powers washing-machine and dishwasher user-interface panels because it integrates segment-LCD controllers, capacitive-touch sensing via TSI, and a 16-bit ADC for temperature sensing - all while drawing under 1 mA in VLLS retention. At 72 MHz it runs UI animations and a low-speed serial stack to the main appliance controller over UART or CAN.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MK10DX64VLK7R – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MK10DX128VLK7 | MK20DX64VLK7 | MK30DX256VLK7 | MK40DX64VLH7 | STM32F103VCT6 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics |
| Package | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 100-LQFP (14x14 mm) - different |
| Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M3 |
| Maximum CPU Clock | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Program Flash | 64 KB | 128 KB | 64 KB | 256 KB | 64 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 32 KB | 16 KB | 48 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +85 C |
Wichtigste Unterscheidungsmerkmale
- Lowest-cost entry to the Kinetis K10 portfolio (vs. MK20DX64VLK7)
- Doubling Flash upgrade path on identical footprint (vs. MK10DX128VLK7)
- Industrial -40 to +105 C grade versus STM32 commercial grade (vs. STM32F103VCT6)
- Integrated segment-LCD controller (vs. MK20DX64VLK7)
Designhinweise
The MK10DX64VLK7R requires multiple VDD/VSS pin pairs distributed around the 80-LQFP package. Place a 100 nF decoupling capacitor within 3 mm of every VDD pin and a bulk 4.7 uF ceramic near the on-chip voltage regulator pin. Estimated: at 72 MHz active current is around 10 mA, rising in peripherals-enabled modes; a properly decoupled 3.3 V rail keeps ripple under 50 mVpp for clean ADC sampling.
In the 80-LQFP (12x12 mm) package, the die has a junction-to-ambient thermal resistance in the 50-70 C/W range typical for LQFP packages. At industrial -40 to +105 C ambient with default active current, no heatsink is required. However, continuous ADC sampling with multiple enabled peripherals in a sealed enclosure should be validated with a thermocouple on the top of the package.
Route the EXTAL/XTAL crystal traces as short and symmetric as possible, with a ground guard ring on both sides, and place the load capacitors within 2 mm of the crystal pins. Use a 4-layer PCB with a continuous ground plane under the MCU for noise immunity. The 0.5 mm pitch LQFP-80 footprint is well-served by 0.2 mm traces on the inner layers fanning out to the GPIO pads.
Do not exceed 3.6 V on any VDD pin; reverse-voltage or hot-plug events without protection can latch up the on-chip regulator. Always configure the low-voltage detect (LVD) and reset the part with the RESET_b pin asserted for at least 100 ms after power-up. For USB applications, the PTG5/PTG6 D+/D- pair must be impedance-matched to 90 ohms differential.
Compliance-Informationen
RoHS and lead-free confirmed per NXP product page and Mouser/DigiKey listings. Industrial -40 to +105 C temperature grade but not AEC-Q100 qualified; for automotive applications choose a K10 -AEC-Q100 suffix variant or move to the S32K1 family.