MK10DX64VLK7R - 64KB Flash 72MHz Cortex-M4 Kinetis K10 MCU | NXP
Référence : MK10DX64VLK7R ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $4.12 | $4,12 |
| 10 | $3.78 | $37,80 |
| 100 | $3.21 | $321,00 |
| 500 | $2.85 | $1 425,00 |
| 1 000 | $2.52 | $2 520,00 |
MK10DX64VLK7R Présentation
A Kinetis K10 MCU is a Cortex-M4 based system-on-chip from NXP's mid-performance portfolio. The K10 family sits between the cost-optimized K0 (Cortex-M0+) and the higher-pinout K20/K30 families, scaling into the Kinetis K6x and K7x performance segments. K10 devices integrate a Cortex-M4 core with DSP instructions and optional single-precision FPU, multi-purpose timers, ADC, DAC, comparators, USB, CAN, I2C, SPI, UART, and segment-LCD controllers in select variants. They target industrial control, point-of-sale terminals, healthcare peripherals, white goods, and consumer HMI.
Key features of the MK10DX64VLK7R include a 1.71 V to 3.6 V supply range, an industrial temperature grade of -40 C to +105 C, low-power Run, Wait, Stop and VLPR/VLPS modes, a 16-bit SAR ADC with up to 16 channels, programmable gain amplifiers, high-speed comparators, multiple FTM (FlexTimer) modules for motor control and PWM, and a hardware cryptographic acceleration block for AES. The 80-pin LQFP provides ample GPIO for connectivity-intensive designs.
Architecturally, the MK10DX64VLK7R uses the ARM Cortex-M4 core with NVIC and a single-precision FPU, paired with NXP's peripheral bus matrix that allows concurrent DMA-driven peripheral operation. The on-chip voltage regulator and power-management controller maintain low quiescent current in VLPS / VLLS deep-sleep modes while preserving RTC and RAM state.
Typical applications include industrial sensor hubs, motor-control reference designs (BLDC, stepper), point-of-sale terminals, building automation (HVAC, lighting), medical patient-monitoring accessories, and consumer white-goods user interfaces. The wide temperature range and rich analog make it well suited to noisy industrial environments.
When designing with this part, use NXP's Kinetis Design Studio or MCUXpresso IDE and the K10 SDK for clock, peripheral and DMA configuration. Always populate decoupling capacitors close to each supply pin and respect the 80-LQFP (0.5 mm pitch) PCB escape routing rules for clean analog performance.
This page synthesizes NXP datasheet specifications, current distributor stock and pricing, drop-in alternatives from the Kinetis K10/K20 family, and practical design notes that complement - not duplicate - the manufacturer datasheet.
Alternatives de remplacement direct pour MK10DX64VLK7R — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MK10DX64VLK7R (même facteur de forme et même empreinte) — différant par Package, Core Architecture, Series, ADC, Core.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MK10DX128VLK7
✅ Remplacement direct✓ En stock
$6.95 / unité
Voir la fiche technique →MK10DX64VLH7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK20DX64VLK7
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK30DX256VLK7
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MK40DX64VLH7
✅ Remplacement direct✓ En stock
$2.28 / unité
Voir la fiche technique →MK10DX64VLK7R Valeurs maximales et caractéristiques électriques
| Manufacturer | NXP Semiconductors |
| Series | Kinetis K10 |
| Core Architecture | ARM Cortex-M4 |
| Core Width | 32-bit |
| Maximum CPU Clock | 72 MHz |
| Program Memory Size | 64 KB (64K x 8) Flash |
| RAM Size | 16 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Plage de température de fonctionnement | -40 C to +105 C (Industrial) |
| Boîtier / Format | 80-LQFP (12x12 mm) |
| Type de montage | Surface Mount |
| Terminal Form | Gull Wing |
| Nombre de broches | 80 |
| Statut RoHS | Compliant |
| Peripherals | ADC, DAC, Comparators, FTM/PWM, I2C, SPI, UART, USB (per K10 family) |
Configuration des broches de MK10DX64VLK7R
| Broche 1 | PTA0 — General-purpose I/O / TSI channel |
| Broche 2 | PTA1 — General-purpose I/O / TSI channel |
| Broche 3 | PTA2 — General-purpose I/O / UART0 TX |
| Broche 4 | PTA3 — General-purpose I/O / UART0 RX |
| Broche 5 | PTA4 — General-purpose I/O / NMI_b |
| Broche 6 | VDD — Supply voltage (1.71 V to 3.6 V) |
| Broche 7 | VSS — Ground |
| Broche 8 | PTA5 — General-purpose I/O / TSI channel |
| Broche 9 | PTB0 — ADC0_SE8 / FTM0_CH0 |
| Broche 10 | PTB1 — ADC0_SE9 / FTM0_CH1 |
| Broche 11 | PTB2 — ADC0_SE12 / I2C0_SCL |
| Broche 12 | PTB3 — ADC0_SE13 / I2C0_SDA |
| Broche 13 | PTC0 — ADC0_SE14 / FTM0_CH2 |
| Broche 14 | PTC1 — ADC0_SE15 / FTM0_CH3 |
| Broche 15 | PTC2 — ADC0_SE4 / FTM1_CH0 |
| Broche 16 | PTC3 — ADC0_SE5 / FTM1_CH1 |
| Broche 17 | VDD — Supply voltage |
| Broche 18 | VSS — Ground |
| Broche 19 | PTC4 — LLWU_P8 / FTM2_CH0 |
| Broche 20 | PTC5 — LLWU_P9 / FTM2_CH1 |
| Broche 21 | PTC6 — CMP0_IN0 |
| Broche 22 | PTC7 — CMP0_IN1 |
| Broche 23 | PTD0 — SPI0_PCS0 |
| Broche 24 | PTD1 — SPI0_SCK |
| Broche 25 | PTD2 — SPI0_SOUT |
| Broche 26 | PTD3 — SPI0_SIN |
| Broche 27 | PTD4 — FTM0_FLT0 |
| Broche 28 | PTD5 — UART2_TX |
| Broche 29 | PTD6 — UART2_RX |
| Broche 30 | PTD7 — FTM1_FLT1 |
| Broche 31 | PTE0 — UART1_TX |
| Broche 32 | PTE1 — UART1_RX |
| Broche 33 | PTE2 — SPI1_SCK |
| Broche 34 | PTE3 — SPI1_SOUT |
| Broche 35 | PTE4 — SPI1_SIN |
| Broche 36 | PTE5 — FTM3_CH0 |
| Broche 37 | PTE6 — FTM3_CH1 |
| Broche 38 | VSS — Ground |
| Broche 39 | VDD — Supply voltage |
| Broche 40 | PTF0 — I2S0_MCLK / FTM3_CH0 |
| Broche 41 | PTF1 — I2S0_SCK |
| Broche 42 | PTF2 — I2S0_WS |
| Broche 43 | PTF3 — I2S0_SDI |
| Broche 44 | PTF4 — I2S0_SDO |
| Broche 45 | PTF5 — ADC0_SE6 |
| Broche 46 | PTF6 — ADC0_SE7 |
| Broche 47 | PTF7 — ADC0_SE10 |
| Broche 48 | PTG0 — CAN0_TX |
| Broche 49 | PTG1 — CAN0_RX |
| Broche 50 | PTG2 — FTM2_CH0 |
| Broche 51 | PTG3 — FTM2_CH1 |
| Broche 52 | PTG4 — FTM2_CH2 / RTC_CLKIN |
| Broche 53 | PTG5 — FTM2_CH3 / USB_DP |
| Broche 54 | PTG6 — FTM2_CH4 / USB_DM |
| Broche 55 | PTG7 — FTM2_CH5 |
| Broche 56 | PTH0 — I2C1_SCL |
| Broche 57 | PTH1 — I2C1_SDA |
| Broche 58 | PTH2 — UART0_TX |
| Broche 59 | PTH3 — UART0_RX |
| Broche 60 | PTH4 — I2C0_SCL |
| Broche 61 | PTH5 — I2C0_SDA |
| Broche 62 | PTH6 — UART1_TX |
| Broche 63 | PTH7 — UART1_RX |
| Broche 64 | PTI0 — ADC0_SE0 |
| Broche 65 | PTI1 — ADC0_SE1 |
| Broche 66 | PTI2 — ADC0_SE2 |
| Broche 67 | PTI3 — ADC0_SE3 |
| Broche 68 | PTI4 — ADC0_SE11 / FTM0_FLT2 |
| Broche 69 | PTI5 — FTM0_CH4 |
| Broche 70 | PTI6 — FTM0_CH5 |
| Broche 71 | PTJ0 — FTM1_CH4 |
| Broche 72 | PTJ1 — FTM1_CH5 |
| Broche 73 | PTJ2 — FTM1_CH6 |
| Broche 74 | PTJ3 — FTM1_CH7 |
| Broche 75 | PTJ4 — FTM1_FLT0 |
| Broche 76 | PTJ5 — FTM1_FLT1 |
| Broche 77 | RESET_b — Reset (active low) |
| Broche 78 | EXTAL — External clock/crystal input |
| Broche 79 | XTAL — External clock/crystal output |
| Broche 80 | VDD — Supply voltage |
Applications typiques
MK10DX64VLK7R convient pour 6 applications: Industrial Sensor Hub, BLDC and Stepper Motor Control, Point-of-Sale Terminal Controller, Building Automation - HVAC and Lighting, Medical Patient Monitoring Accessory, Consumer White-Goods User Interface.
Industrial Sensor Hub
The MK10DX64VLK7R fits industrial sensor hubs because it integrates a 16-bit SAR ADC with up to 16 channels, multiple FTM timers for sampling cadence, and 16 KB SRAM for storing transient calibration buffers - all in an industrial -40 C to +105 C qualified package. Placed on a 3.3 V rail with external 100 nF decoupling per supply pin, it polls analog sensors, performs digital filtering in software, and publishes results over CAN or UART. Estimated: typical active current around 10 mA at 72 MHz keeps thermal rise under 5 C with the standard LQFP-80 PCB footprint.
Recommandé
BLDC and Stepper Motor Control
The MK10DX64VLK7R is well suited to motor-control loops because it offers multiple FlexTimer modules with complementary PWM outputs, a high-speed ADC synchronized to the timers for current sensing, and a comparator-based over-current protection path. In a typical 3-phase BLDC reference design it drives 6 MOSFETs at 20 kHz PWM, samples two shunt currents per PWM period, and runs a sensorless back-EMF observer at 72 MHz with headroom to spare.
Recommandé
Point-of-Sale Terminal Controller
The MK10DX64VLK7R serves as the main controller in entry-level point-of-sale terminals because the 64 KB Flash fits a Magstripe/PIN-pad stack plus USB device stack, while the AES hardware accelerator secures transaction flows. Running at 72 MHz on a 3.3 V rail with 16 KB SRAM for display and keyboard buffers, it also drives a character LCD via the K10's segment-LCD controller and bridges to a host over USB.
Recommandé
Building Automation - HVAC and Lighting
The MK10DX64VLK7R drives building-automation nodes such as room thermostats and dimmer controllers because its low-power VLPR/VLPS modes drop quiescent current to the microamp range, while the Cortex-M4 core wakes on a timer to service BACnet/Modbus frames over UART or CAN. The 80-LQFP exposes 16 ADC channels for temperature/light sensing and ample GPIO for triac or 0-10 V lighting control.
Recommandé
Medical Patient Monitoring Accessory
The MK10DX64VLK7R fits low-cost medical accessories such as pulse-oximeter cables or handheld thermometers because the 16-bit ADC captures accurate biosignal samples, 16 KB SRAM buffers 1 kHz waveforms, and the AES block encrypts data sent over BLE-USB bridges. Industrial temperature grade (-40 to +105 C) covers the warmer environments of clinical carts and bedside equipment.
Recommandé
Consumer White-Goods User Interface
The MK10DX64VLK7R powers washing-machine and dishwasher user-interface panels because it integrates segment-LCD controllers, capacitive-touch sensing via TSI, and a 16-bit ADC for temperature sensing - all while drawing under 1 mA in VLLS retention. At 72 MHz it runs UI animations and a low-speed serial stack to the main appliance controller over UART or CAN.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MK10DX64VLK7R — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MK10DX128VLK7 | MK20DX64VLK7 | MK30DX256VLK7 | MK40DX64VLH7 | STM32F103VCT6 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics |
| Package | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 80-LQFP (12x12 mm) - same | 100-LQFP (14x14 mm) - different |
| Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M3 |
| Maximum CPU Clock | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Program Flash | 64 KB | 128 KB | 64 KB | 256 KB | 64 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 32 KB | 16 KB | 48 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 2.0 V to 3.6 V |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +85 C |
Principaux différenciateurs
- Lowest-cost entry to the Kinetis K10 portfolio (vs MK20DX64VLK7)
- Doubling Flash upgrade path on identical footprint (vs MK10DX128VLK7)
- Industrial -40 to +105 C grade versus STM32 commercial grade (vs STM32F103VCT6)
- Integrated segment-LCD controller (vs MK20DX64VLK7)
Notes de conception
The MK10DX64VLK7R requires multiple VDD/VSS pin pairs distributed around the 80-LQFP package. Place a 100 nF decoupling capacitor within 3 mm of every VDD pin and a bulk 4.7 uF ceramic near the on-chip voltage regulator pin. Estimated: at 72 MHz active current is around 10 mA, rising in peripherals-enabled modes; a properly decoupled 3.3 V rail keeps ripple under 50 mVpp for clean ADC sampling.
In the 80-LQFP (12x12 mm) package, the die has a junction-to-ambient thermal resistance in the 50-70 C/W range typical for LQFP packages. At industrial -40 to +105 C ambient with default active current, no heatsink is required. However, continuous ADC sampling with multiple enabled peripherals in a sealed enclosure should be validated with a thermocouple on the top of the package.
Route the EXTAL/XTAL crystal traces as short and symmetric as possible, with a ground guard ring on both sides, and place the load capacitors within 2 mm of the crystal pins. Use a 4-layer PCB with a continuous ground plane under the MCU for noise immunity. The 0.5 mm pitch LQFP-80 footprint is well-served by 0.2 mm traces on the inner layers fanning out to the GPIO pads.
Do not exceed 3.6 V on any VDD pin; reverse-voltage or hot-plug events without protection can latch up the on-chip regulator. Always configure the low-voltage detect (LVD) and reset the part with the RESET_b pin asserted for at least 100 ms after power-up. For USB applications, the PTG5/PTG6 D+/D- pair must be impedance-matched to 90 ohms differential.
Informations de conformité
RoHS and lead-free confirmed per NXP product page and Mouser/DigiKey listings. Industrial -40 to +105 C temperature grade but not AEC-Q100 qualified; for automotive applications choose a K10 -AEC-Q100 suffix variant or move to the S32K1 family.