MPC8544CVTANGA - PowerQUICC III 800MHz MPU | NXP | Networking SoC
Teilenummer: MPC8544CVTANGA ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $263.4 | $2.634,00 |
| 100 | $238.5 | $23.850,00 |
| 500 | $215.8 | $107.900,00 |
| 1.000 | $192.6 | $192.600,00 |
MPC8544CVTANGA Übersicht
What is a PowerQUICC III processor? A PowerQUICC III is NXP's third-generation Power Architecture communications processor family (MPC85xx), succeeding the PowerQUICC II (MPC82xx). It belongs to the broader hierarchy: microprocessor (MPU) -> application processor -> communications SoC -> PowerQUICC family -> MPC85xx series. PowerQUICC III parts integrate a high-performance e500 core with on-chip peripheral controllers, reducing bill-of-materials and enabling single-chip designs for routers, switches, line cards, and industrial gateways where a separate CPU plus chipset would otherwise be required.
Key features include 256 KB of on-chip SRAM, integrated L2 cache, security acceleration, dual I2C, four UARTs, dual DMA controllers, GPIO, and a local bus controller. The integrated DDR memory controller supports up to 1 GB of DDR1 or DDR2 with ECC, while the PCI/PCIe block provides both a 32-bit/66 MHz PCI interface and a x4 PCIe endpoint/root complex. The 1 GbE MAC supports SGMII and 1000BASE-T PHY connectivity.
Architecturally, the MPC8544E family uses a 90 nm process and implements high-speed RapidIO serialization alongside the standard peripherals, enabling fabric-level backplane applications. Performance targeting typically falls in the 1.2 GHz-compatible range when considering the wider MPC85xx family (the MPC8544E itself tops at 800 MHz core clock per NXP product documentation).
Typical applications include industrial routers, secure VPN gateways, factory automation controllers, defense and aerospace networking line cards, and high-end embedded computing platforms requiring sustained protocol offload.
When designing with this part, ensure proper thermal management: at 800 MHz with industrial +105C operation, the FCBGA substrate typically dissipates 5-9 W, requiring a multi-layer PCB thermal via array under the die and adequate airflow. Use NXP's BSD/ BSD-Linux BSP and U-Boot for fast bring-up.
Drop-in-Alternativen für MPC8544CVTANGA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MPC8544CVTANGA (gleiche Bauform und Footprint) – abweichend in Ethernet, Mounting Type, Number of Cores, Operating Temperature, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC8544CVJANGA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8544EVTANGA
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$195 / Stück
Datenblatt ansehen →MPC8544CVTANG
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8544CVTALEA
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8544EECVTANGA
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8536ECVTANGA
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8544CVTANGA Grenzwerte & elektrische Eigenschaften
| Core Architecture | Power Architecture e500, 32-bit |
| Maximum Core Frequency | 800 MHz |
| Process Technology | 90 nm CMOS |
| Number of Cores | 1 |
| Memory Controller | DDR1/DDR2 with ECC, up to 1 GB |
| PCI Interface | 32-bit, 66 MHz PCI |
| PCI Express Interface | x4 PCIe endpoint/root complex |
| Ethernet | 1 GbE MAC (SGMII/1000BASE-T) |
| USB Interface | USB 2.0 (on-chip EHCI/UTMI) |
| Serial Interfaces | 2x I2C, 4x UART, GPIO, dual DMA |
| Betriebstemperatur | -40C to +105C (industrial) |
| Versorgungsspannung | 1.8 V / 2.5 V / 3.3 V |
| Gehäuse | 783-pin FCBGA (NGA), 29 x 29 mm |
| Silicon Revision | Rev 2.1 |
| Montageart | Surface Mount (BGA, socketed or soldered) |
| RoHS-Status | Compliant per NXP product page |
MPC8544CVTANGA 783-pin fcbga (nga), 29 x 29 mm Pinbelegungsleitfaden
Pinbelegung für MPC8544CVTANGA (783-pin fcbga (nga), 29 x 29 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC8544CVTANGA.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC8544CVTANGA ist geeignet für 7 Anwendungs: Industrial Router / Secure VPN Gateway, Factory Automation Controller, Defense / Aerospace Networking Line Card, Edge Compute Gateway / Industrial IoT, Solid-State Drive (SSD) Storage Controller Host, Printer/MFP Image Processing Backend, Medical Imaging Edge Node.
Industrial Router / Secure VPN Gateway
The NXP MPC8544CVTANGA's 800 MHz e500 core and integrated 1 GbE MAC with PCI Express enable mid-range industrial routers and VPN gateways. In typical deployments, an appliance manufacturer pairs the SoC with a PCIe-based crypto accelerator (or uses the MPC8544E variant's on-chip SEC engine) for IPSec/AES throughput, while DDR2 memory (up to 1 GB with ECC) sustains flow-table lookups. The industrial -40C to +105C temperature range is essential for outdoor enclosure deployment. The MPC8544CVTANGA places one GbE MAC for WAN side, with downstream PCIe adding 4-8 GbE ports via a PCIe-to-Ethernet bridge IC.
Empfohlen
Factory Automation Controller
For factory automation and PLC backplanes, the MPC8544CVTANGA integrates CPU + DDR controller + PCIe + GPIO + UART in one FCBGA package, shrinking BOM and reducing failure surfaces on the production line. Its industrial -40C to +105C rating suits cabinet-side installation, and the dual I2C bus supports sensor and EEPROM chains. A typical application hosts a deterministic real-time Linux kernel (PREEMPT-RT patch) plus EtherCAT master firmware offloaded onto the 1 GbE MAC. Compared with discrete CPU-plus-chipset designs, the SoC approach saves 30-40 percent PCB area and reduces JTAG-only debug scenarios by unifying the boot chain.
Empfohlen
Defense / Aerospace Networking Line Card
Aerospace and defense switching line cards use the MPC8544CVTANGA for its high-reliability FCBGA substrate, industrial -40C to +105C temperature operation, and NXP's controlled-bom aerospace program support. The integrated PCIe endpoint provides backplane connectivity to chassis switches, while the DDR2 with ECC protects against single-event upsets (SEU) at altitude. Designers pair the SoC with radiation-hardened FPGAs (for cryptographic offload) over PCIe, leveraging the e500 core for control-plane packet processing. Its Power Architecture heritage is widely supported by green-hills INTEGRITY and VxWorks 653 avionics RTOSes.
Empfohlen
Edge Compute Gateway / Industrial IoT
The MPC8544CVTANGA forms the core of edge compute gateways where mid-range CPU performance (800 MHz e500) is sufficient for protocol translation, MQTT broker logic, and local analytics. Its on-chip USB 2.0 (via UTMI+EHCI) attaches a Bluetooth or ZigBee dongle for low-power wireless backhaul to legacy industrial sensors. The integrated GbE MAC provides wire-speed protocol bridging to upstream SCADA systems. Industrial IoT deployments benefit from the part's extended temperature range and from NXP's 10+ year longevity commitment for the MPC85xx family.
Empfohlen
Solid-State Drive (SSD) Storage Controller Host
Mid-range enterprise SSD controllers embed the MPC8544CVTANGA to bridge SATA/SAS to PCIe upstream ports. The 800 MHz e500 core sustains SATA 6 Gbps and SAS 12 Gbps link-layer processing, while the integrated DDR2 controller buffers flash translation layer (FTL) tables. Industrial-rated SSDs targeting defense and outdoor telecom use the part's -40C to +105C operation. The SoC's GPIO and I2C interfaces are commonly used for thermal sensor and power-management IC telemetry. Pair the MPU with a TI or Analog Devices hot-swap controller for enterprise JBOD scenarios.
Empfohlen
Printer/MFP Image Processing Backend
High-end multifunction printer (MFP) controllers use the MPC8544CVTANGA to drive the image-processing pipeline: 1200 dpi scan data through JPEG2000 compression, RIP rendering, and dual GbE/USB for office network and walk-up print. The 783-FCBGA package combines a powerful e500 core with extensive peripherals in a footprint that supports integrated print/scan engine controller cards. Compared with a discrete CPU/GPU pair, the SoC reduces system cost by 25-30 percent while maintaining deterministic real-time behavior for print jobs.
Empfohlen
Medical Imaging Edge Node
Medical imaging edge nodes (ultrasound beamformer companions, patient-monitor data hubs) use the MPC8544CVTANGA for its industrial temperature range, hardware determinism, and long lifecycle. The SoC aggregates DICOM data from a PCIe-frame-grabber over its PCIe endpoint, performs on-board filtering, and pushes results upstream over the integrated 1 GbE MAC. The e500 core's ECC-protected memory subsystem supports transient SEU detection required for IEC 60601-1 deployments with margin, though formal certification is the integrator's responsibility. Pair the part with medical-grade ADCs and isolated serial line drivers.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC8544CVTANGA – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC8544CVJANGA | MPC8544CVTANG | MPC8544EVTANGA |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) | 783-FCBGA (29x29) |
| Core | PowerPC e500, 1 core | PowerPC e500, 1 core | PowerPC e500, 1 core | PowerPC e500 + SEC, 1 core |
| Maximum Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz (with security engine) |
| Industrial Temperature Range | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| DDR1/DDR2 Controller | Yes (with ECC, up to 1 GB) | Yes (with ECC) | Yes (with ECC) | Yes (with ECC) |
| PCI Express | x4 endpoint/root complex | x4 endpoint/root complex | x4 endpoint/root complex | x4 endpoint/root complex |
| 1 GbE MAC | Yes (SGMII) | Yes (SGMII) | Yes (SGMII) | Yes (SGMII) |
Wichtigste Unterscheidungsmerkmale
- Industrial -40C to +105C operation with full 800 MHz performance (vs. MPC8544CVTANG)
- Drop-in pin-compatibility with the security-equipped E variant (vs. MPC8544EVTANGA)
- Identical package as MPC8536 family for fan-out reuse (vs. MPC8536ECVTANGA)
Designhinweise
Estimated: At 800 MHz with the default 1.0 V core supply (~3-5 W typical CPU power per NXP silicon characterization), plus DDR2 I/O and SerDes power, total board dissipation is approximately 5-9 W steady-state. Use the recommended thermal via array under the die and at least 6 layer PCB with a 2 oz inner copper ground pour. Provide forced airflow (~2 m/s) over the FCBGA to keep the junction below 105C in industrial enclosures.
Route DDR2 traces first as matched-length pairs using fly-by topology to terminate at the VTT island. The 783-FCBGA's 1 mm ball pitch demands microvia (laser-drilled) or via-in-pad construction on the break-out layer; assign 4 PCB layers for power and 8-10 layers total. Use the Altium/KiCad BGA fan-out pattern guidelines from NXP's application note AN3330.
Separate analog and digital ground returns around the chip; on-chip SGMII PHY requires a clean 1.0 V analog rail with a ferrite bead isolation. Keep the PCIe lanes within 5 cm of the BMC connector to preserve signal integrity. Avoid routing any signal under the FCBGA's thermal pad and ensure the JTAG TDI/TDO pins have a pull-up/pull-down per reference manual chapter 12.
BGA parts ship in MSL-3 moisture-sensitive packaging; bake per JEDEC J-STD-033 before assembly. The CCB clock tree requires explicit programming in RCW (Reset Configuration Word) before the e500 core responds - many boot failures trace back to corrupted RCW sources. Verify all four Local Bus Reset strapping options before production.
Sequencing of the 1.0 V core, 2.5 V DDR, and 3.3 V I/O rails must follow NXP's power-up ordering (core before I/O, or ramped together). Use the MAX174ACWI or similar supervisor with proper sequencing delays. Add bulk decoupling (47 uF polymer) close to each FCBGA power pad pair to suppress core-noise transients that would otherwise corrupt e500 PLL lock attempts.
Compliance-Informationen
RoHS compliant per NXP product page. Industrial temperature grade -40C to +105C, not AEC-Q100 qualified for automotive. NXP's MPC85xx family is included in NXP's product longevity program.
