MPC8572LVTAULE - PowerQUICC III 1.333GHz Dual-Core SoC | NXP
Teilenummer: MPC8572LVTAULE ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268 | $2.680,00 |
| 100 | $245 | $24.500,00 |
| 500 | $222 | $111.000,00 |
| 1.000 | $198 | $198.000,00 |
MPC8572LVTAULE Übersicht
Background Knowledge - What is a PowerQUICC III Communications Processor: A communications processor is a specialized System-on-Chip (SoC) that integrates one or more general-purpose CPU cores with hardware acceleration engines, memory controllers, and high-speed serial interfaces specifically designed for networking and telecom infrastructure. The PowerQUICC III family (PowerPC e500 core, MPC85xx family) sits within the broader taxonomy: Microprocessor -> SoC -> communications processor -> networking ASIC. PowerQUICC III SoCs are widely deployed in routers, switches, base stations, and storage systems where deterministic throughput and protocol offload are required.
Key differentiating specifications: 1.333 GHz dual-core e500 with 32 KB L1 instruction cache and 32 KB L1 data cache per core, 1 MB shared L2 cache, DDR2/DDR3 memory controller with ECC support, three PCI Express interfaces, two Serial RapidIO interfaces, two Gigabit Ethernet MACs, and an integrated security engine. The 1023-FCBGA package uses a 33x33 mm substrate with the flip-chip die facing up; thermal performance is handled through the package lid and an attached heatsink.
Technical depth: The MPC8572L uses a 90 nm CMOS process (per Freescale hardware specifications, document MPC8572E PowerQUICC III). The platform integrates a CoreNet fabric-based coherency engine that lets both e500 cores snoop each other's L1 caches against the shared L2, simplifying software coherency in symmetric multiprocessing. The integrated memory controller supports up to 8 GB of DDR2/DDR3 with ECC, and the SerDes lanes can be configured for combinations of PCIe, SRIO, and SGMII.
Typical applications: edge routers, multiservice switches, line cards for chassis-based routers, LTE/3G base-station baseband cards, IP-PBX, security appliances, and industrial control systems. The wide operating temperature range of 0C to +105C suits thermally constrained networking chassis.
Design consideration: Use the Freescale/NXP CodeWarrior or the open-source Yocto SDK to build U-Boot and Linux BSP; ensure the SerDes reference clock jitter stays below 100 ps RMS to keep PCIe and SRIO links in spec. Power sequencing on the GVDD/CVDD rails must follow the order in the hardware specifications to avoid latch-up.
This page synthesizes distributor stock, drop-in alternatives, and practical design notes for engineers evaluating or sourcing the MPC8572LVTAULE - information not collated on any single distributor page.
Drop-in-Alternativen für MPC8572LVTAULE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC8572EVTAULE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8572LVTAULD
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8572CLVTAULE
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
P2020NSN2MHC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
P2040NSN4MHC
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8572LVTAULE Grenzwerte & elektrische Eigenschaften
| Processor Type | MPC85xx PowerQUICC III, dual-core PowerPC e500 |
| Number of Cores | 2 |
| Core Architecture | 32-bit PowerPC e500 |
| Maximum Core Frequency | 1.333 GHz |
| L1 Cache (Instruction, per core) | 32 KB |
| L1 Cache (Data, per core) | 32 KB |
| L2 Cache | 1 MB shared |
| Memory Controller | DDR2/DDR3 with ECC, up to 8 GB |
| PCI Express Interfaces | 3 x PCIe (Gen 1) |
| Serial RapidIO Interfaces | 2 x SRIO |
| Ethernet MACs | 2 x 10/100/1000 (GbE) |
| Core Voltage | 1.1 V |
| I/O Voltage | 1.8 V / 2.5 V / 3.3 V |
| Process Technology | 90 nm CMOS |
| Betriebstemperatur | 0 C to +105 C |
| Gehäuse | 1023-ball FCBGA (33x33 mm) |
| Montageart | Surface Mount (flip-chip BGA) |
| Revision | R2.2.1 |
| RoHS-Status | Compliant (lead-free per datasheet) |
MPC8572LVTAULE 1023-ball fcbga (33x33 mm) Pinbelegungsleitfaden
Pinbelegung für MPC8572LVTAULE (1023-ball fcbga (33x33 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC8572LVTAULE.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC8572LVTAULE ist geeignet für 7 Anwendungs: Edge Router / Branch Office Router, Multiservice Switch Line Card, LTE / 3G Base Station Baseband Card, Network-Attached Storage (NAS) Controller, Industrial Control / Substation Gateway, IP-PBX / Unified Communications Appliance, Security Appliance / VPN Gateway.
Edge Router / Branch Office Router
The MPC8572LVTAULE's dual e500 cores running at 1.333 GHz, combined with two Gigabit Ethernet MACs and hardware-accelerated IPsec/SEC engine, deliver line-rate routing for SMB edge routers. Placed on a line card alongside DDR3 with ECC, the device handles routing tables, NAT, and QoS in software while offloading encryption to its integrated accelerator, providing a measurable performance advantage over single-core alternatives. Compared with low-end MIPS-based SoCs, the 1.333 GHz e500 cores offer roughly 2-3x the packet-processing throughput per watt, making this part a strong fit for fanless branch-office designs.
Empfohlen
Multiservice Switch Line Card
Multiservice switches aggregate Ethernet, MPLS, and TDM traffic and need deterministic per-port throughput. The MPC8572LVTAULE provides two GbE MACs and three PCIe lanes that can fan out to a chassis backplane, while the Serial RapidIO ports enable chip-to-chip interconnect with adjacent line cards. The 1 MB shared L2 cache keeps packet-header tables hot, and the dual-core e500 architecture lets one core handle control-plane routing protocols while the other handles data-plane forwarding, reducing jitter under heavy load.
Empfohlen
LTE / 3G Base Station Baseband Card
Small-cell and picocell baseband cards require a mix of high-throughput DSP-style processing plus control-plane protocol handling. The MPC8572LVTAULE's dual e500 cores at 1.333 GHz provide the processing headroom for L2/L3 protocol stacks, while the PCIe links connect to a companion baseband DSP or FPGA. The 0 to +105 C operating range suits outdoor cabinet deployments with industrial airflow, and the lead-free 1023-FCBGA package meets telecom reliability requirements.
Empfohlen
Network-Attached Storage (NAS) Controller
Enterprise NAS controllers require high-throughput storage I/O plus network protocol offload. The MPC8572LVTAULE's three PCIe Gen 1 lanes can drive multiple SAS/SATA controllers for storage, while the dual GbE MACs provide bonding and failover for network connectivity. The shared 1 MB L2 cache accelerates file-system metadata operations, and the integrated DDR2/DDR3 controller with ECC protects against silent data corruption in RAID rebuild operations.
Empfohlen
Industrial Control / Substation Gateway
Substation gateways in IEC 61850 environments demand deterministic processing plus ruggedized thermal performance. The MPC8572LVTAULE runs deterministic real-time operating systems (VxWorks, QNX) on its dual e500 cores, while the SerDes interfaces connect to fiber-optic PHY for substation LAN. The 0 to +105 C operating temperature and lead-free 1023-FCBGA package meet IEC 61850-3 environmental requirements when paired with a proper heatsink and conformal coating.
Empfohlen
IP-PBX / Unified Communications Appliance
Mid-range IP-PBX platforms handling 100-500 simultaneous VoIP channels need a control-plane processor plus DSP offload. The MPC8572LVTAULE's dual e500 cores manage SIP/H.323 signaling and call-routing tables, while PCIe links connect to a separate DSP array for voice codecs. The SEC engine accelerates SRTP/TLS for secure SIP trunks, and the integrated GbE MACs provide primary and secondary network interfaces without an external switch.
Empfohlen
Security Appliance / VPN Gateway
Mid-range VPN gateways terminating hundreds of IPsec tunnels need hardware-accelerated cryptography plus a fast control plane. The MPC8572LVTAULE's integrated SEC engine handles AES-256/SHA-256 at line rate, while the dual e500 cores manage IKEv2 key exchange and routing. The 1.333 GHz clock and 1 MB L2 cache keep tunnel-lookup tables hot, and the PCIe lanes connect to external crypto accelerator cards when higher throughput is required.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC8572LVTAULE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC8572EVTAULE | MPC8572LVTAULD | MPC8572CLVTAULE | P2020NSN2MHC | P2040NSN4MHC |
|---|---|---|---|---|---|---|
| Package | 1023-FCBGA (33x33) | 1023-FCBGA (33x33) - same | 1023-FCBGA (33x33) - same | 1023-FCBGA (33x33) - same | 1023-FCBGA (33x33) - same | 1023-FCBGA (33x33) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 2 x e500 | 2 x e500 | 2 x e500 | 2 x e500 | 1 x e500 (-50%) | 4 x e500 (+100%) |
| Core Frequency | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.0-1.2 GHz | 1.0-1.5 GHz |
| L2 Cache | 1 MB shared | 1 MB shared | 1 MB shared | 1 MB shared | 512 KB | 2 MB |
| PCIe Lanes | 3 x PCIe Gen 1 | 3 x PCIe Gen 1 | 3 x PCIe Gen 1 | 3 x PCIe Gen 1 | 4 x PCIe Gen 2 | 4 x PCIe Gen 2 |
| SRIO Interfaces | 2 x SRIO | 2 x SRIO | 2 x SRIO | 2 x SRIO | 2 x SRIO | 5 x SRIO |
| Security Engine (SEC) | Basic SEC | Enhanced SEC | Basic SEC | Basic SEC | Enhanced SEC | Enhanced SEC |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C | -40 C to +105 C | -40 C to +105 C |
| Lifecycle Status | NRNR | NRNR | NRNR | NRNR | Active | Active |
Wichtigste Unterscheidungsmerkmale
- Same-package single-core downgrade option (vs. P2020NSN2MHC)
- Same-package quad-core upgrade option (vs. P2040NSN4MHC)
- Enhanced security engine variant available (vs. MPC8572EVTAULE)
- Industrial-grade temperature option in same package (vs. P2020NSN2MHC)
Designhinweise
Estimated: At Tj = 105 C max with a typical dual-core e500 at 1.333 GHz workload, total power dissipation is approximately 8-12 W depending on SerDes utilization. The 1023-FCBGA (33x33) package requires a forced-air cooled heatsink (theta_JA target around 1.5 C/W with heat sink + 200 LFM airflow) to stay within the 0 to +105 C operating range. Designers should follow NXP application note AN4329 for heatsink attachment and TIM selection; lid-down heatsink with thermal interface material rated for at least 3 W/m-K is recommended.
The 1023-ball FCBGA uses a 1.0 mm ball pitch and requires a 12-layer PCB minimum with microvia stackups to escape the inner-row balls. Place decoupling capacitors directly beneath the package on the opposite side of the board, with at least 22uF of bulk capacitance per VDD rail within 5 mm of the balls. Reference the Freescale hardware specifications layout chapter for the exact via-in-pad, dog-bone fanout, and SerDes lane routing recommendations (100 ohm differential, length-matched within 150 mil).
The MPC8572LVTAULE has separate GVDD (core) and CVDD (I/O) rails. Power-on sequence per the hardware specifications requires GVDD to ramp before CVDD; failure to follow the sequence risks latch-up. A common in-production design uses a TPS65510 or UCD9222 to manage the sequencing. Estimate: design the upstream DC-DC converter to deliver at least 15 A peak on the GVDD rail to accommodate core transients during SerDes bring-up.
SerDes lanes (PCIe, SRIO, SGMII) require AC-coupling capacitors on the transmit side as close to the SoC as possible (within 100 mil). Reference clock jitter must be below 100 ps RMS for PCIe Gen 1 compliance and 40 ps RMS for SRIO at 3.125 Gbps. Use a dedicated clock generator such as the CDCM61002 or similar rather than a generic oscillator to meet the SerDes jitter mask.
Common pitfalls include (1) using the wrong RCW (Reset Configuration Word) settings that disable SerDes lanes needed for the design; (2) omitting the I2C bus to read the SPD/EEPROM during DDR3 initialization, causing the memory controller to fail to train; (3) neglecting to validate the SEC engine firmware load for IPsec applications. Always reference the Freescale/NXP BSP release notes for the RCW and U-Boot environment for the specific silicon revision (R2.2.1 for this part).
Compliance-Informationen
Trailing 'E' in MPC8572LVTAULE denotes lead-free / RoHS-compliant version per Freescale ordering nomenclature. Not AEC-Q100 qualified - this is a networking communications processor, not an automotive-grade part. Halogen-free status not explicitly stated in verified data.