P5020NXE1TNB - QorIQ P5020 Dual-Core 2.0GHz SoC | NXP
Teilenummer: P5020NXE1TNB ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $412.5 | $412,50 |
| 10 | $385 | $3.850,00 |
| 100 | $348 | $34.800,00 |
| 500 | $312 | $156.000,00 |
| 1.000 | $285 | $285.000,00 |
P5020NXE1TNB Übersicht
A communications processor SoC (System-on-Chip) is a highly integrated microprocessor that combines CPU cores, memory controllers, security accelerators, and packet-processing interfaces onto a single die. QorIQ P5 series devices belong to the Power Architecture communications processor family, positioned in the hierarchy Power Architecture -> RISC microprocessor -> embedded SoC -> communications processor. These parts traditionally target routers, switches, base stations, and other packet-processing equipment where deterministic throughput and integrated data-plane accelerators matter more than raw GHz performance.
Key features of the P5020NXE1TNB include dual e5500 cores up to 2.0GHz, up to 64GB DDR3/DDR3L addressable memory with ECC, integrated SEC 4.2 cryptographic engine, three PCIe controllers, two 10-Gigabit Enhanced SGMII interfaces, multiple Gigabit Ethernet MACs, two Serial RapidIO controllers, and a high-bandwidth datapath accelerator. The on-chip SEC 4.2 engine offloads encryption, decryption, and key-management workloads from the cores, enabling line-rate secure traffic handling.
Architecturally, the P5020 combines dual out-of-order Power Architecture e5500 cores with a coherency fabric that links the cores to the memory subsystem, the datapath accelerator, and the high-speed serial I/O. The e5500 core includes speculative execution and hardware prefetch, while the platform layer adds hardware queues and buffer management to accelerate networking workloads without CPU intervention.
Typical applications include enterprise routers, multiservice gateways, line cards for chassis-based switches, LTE small-cell base stations, network-attached storage controllers, industrial control planes, and aerospace/defense packet processors. The extended temperature rating and integrated SEC make the part well suited to secured outdoor or industrial deployments.
When designing with this device, allocate substantial PCB area for the FCBGA substrate escape routing, provide a multi-rail power solution (typically 1.0V core, 1.5V DDR3, 2.5V/3.3V I/O), and follow NXP's reference design for SerDes reference-clock jitter and decoupling. Boot-mode strapping and JTAG access must be planned before layout because the FCBGA ball map is dense and rework is impractical.
This page synthesizes distributor pricing, drop-in alternatives from the QorIQ P5 family, and practical design notes that complement the NXP datasheet rather than repeat it.
Drop-in-Alternativen für P5020NXE1TNB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit P5020NXE1TNB (gleiche Bauform und Footprint) – abweichend in Core Architecture, Mounting Type, Package, Operating Temperature, PCI Express.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernP5020NXE1TNB Grenzwerte & elektrische Eigenschaften
| Core Architecture | PowerPC e5500, 64-bit |
| Number of Cores | 2 |
| Core Frequency | 2.0 GHz |
| Bus Width | 64-bit |
| Memory Controller | DDR3 / DDR3L with ECC |
| Memory Bus Frequency | 1333 MHz |
| Security Engine | SEC 4.2 (cryptographic acceleration) |
| Co-Processor / DSP | SEC 4.2 (security), no DSP listed |
| PCI Express | 3 x PCIe controllers |
| Gigabit Ethernet | Multiple GbE MACs (10G-capable SGMII) |
| Serial RapidIO | 2 x SRIO controllers |
| Betriebstemperaturbereich | -40C to +105C (extended) |
| Supply Voltage Range | Minimum 1.05 V (core, per Partstack data) |
| Gehäuse | 1295-ball FCBGA (37.5 x 37.5 mm) |
| Montageart | Surface Mount (FCBGA) |
| Graphics Acceleration | No |
P5020NXE1TNB 1295-ball fcbga (37.5 x 37.5 mm) Pinbelegungsleitfaden
Pinbelegung für P5020NXE1TNB (1295-ball fcbga (37.5 x 37.5 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für P5020NXE1TNB.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
P5020NXE1TNB ist geeignet für 6 Anwendungs: Enterprise Router / Multiservice Gateway, LTE / 5G Small-Cell Base Station, Network-Attached Storage (NAS) Controller, Industrial Control Plane / Edge Gateway, Aerospace / Defense Packet Processor, Smart Grid / Substation Communication.
Enterprise Router / Multiservice Gateway
P5020NXE1TNB powers enterprise-class routers and multiservice gateways that combine WAN aggregation, VPN termination, and basic firewalling. The two 2.0GHz e5500 cores handle control-plane routing protocols while SEC 4.2 offloads IPsec encryption at line rate, eliminating CPU bottlenecks in tunneled traffic. Three PCIe controllers connect to external PHY or crypto accelerators, and dual SRIO ports backplane multiple line cards in a chassis. Operating from -40C to +105C, the device suits outdoor and industrial-cabinet deployments where thermal headroom is constrained.
Empfohlen
LTE / 5G Small-Cell Base Station
P5020NXE1TNB serves as the baseband and packet-processing engine in LTE small-cell base stations. The integrated SEC engine secures S1/X2 interfaces against tampering, while the hardware datapath accelerator and SerDes lanes handle CPRI or eCPRI front-haul connectivity to remote radio units. Two cores at 2.0GHz deliver the throughput needed for 4T4R 20MHz LTE, and the -40C to +105C temperature rating supports outdoor-pole-backlot mounting. Migration to T2080 or LS1043 designs is straightforward because NXP preserves the Power Architecture toolchain across generations.
Empfohlen
Network-Attached Storage (NAS) Controller
P5020NXE1TNB powers enterprise NAS controllers that require multi-gigabit file throughput, hardware-accelerated encryption, and redundant storage paths. SEC 4.2 transparently encrypts volumes at line rate, while three PCIe lanes connect to SAS/SATA HBAs, 10GbE NICs, or NVMe SSDs. Dual SRIO interfaces provide high-bandwidth links to companion processors in dual-controller configurations. The DDR3L controller with ECC ensures single-bit memory errors are corrected silently for 24/7 file-server reliability.
Empfohlen
Industrial Control Plane / Edge Gateway
P5020NXE1TNB serves industrial edge gateways that bridge OT protocols (Modbus, EtherCAT, PROFINET) to IP networks. The dual e5500 cores run a real-time Linux distribution alongside protocol stacks, while SEC 4.2 protects management-plane traffic. Extended -40C to +105C operation tolerates cabinet environments near motor drives or outdoor enclosures. Multiple GbE and PCIe lanes provide flexible connectivity to PLCs, sensors, and uplink routers without requiring an external switch.
Empfohlen
Aerospace / Defense Packet Processor
P5020NXE1TNB is qualified for aerospace and defense packet-processing applications such as tactical radio gateways, mission-computers, and avionics networking. The hardened Power Architecture instruction set, combined with SEC 4.2 for classified-traffic handling, supports secure military communications. Operating temperature range and NXP's long-term support via Rochester Electronics make the part viable for programs with multi-decade field support requirements where redesign risk is unacceptable.
Empfohlen
Smart Grid / Substation Communication
P5020NXE1TNB operates in IEC 61850 substation communication controllers where secure, deterministic packet handling is mandatory. The SEC engine encrypts GOOSE and Sampled-Values traffic, while the dual e5500 cores process protocol stacks plus local HMI logic. Substation environments demand -40C to +105C operation, surge immunity, and long-term reliability, all supported by the P5020's industrial temperature rating and NXP's ruggedized silicon process.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für P5020NXE1TNB – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | P5020NXE1VNB | P5020NSE1VNB | P5040NXE7VNC | P5040NSE7VNC | P5010NXE1TNB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCBGA (37.5x37.5) | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same | 1295-FCBGA (37.5x37.5) - same |
| Number of Cores | 2 (dual e5500) | 2 | 2 | 4 | 4 | 1 |
| Core Frequency | 2.0 GHz | 1.8 GHz | 1.8 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz |
| Temperature Grade | -40C to +105C (Extended) | -40C to +105C (Extended) | 0C to +105C (Standard) | -40C to +105C (Extended) | 0C to +105C (Standard) | -40C to +105C (Extended) |
| Security Engine | SEC 4.2 | SEC 4.2 | SEC 4.2 | SEC 4.2 | SEC 4.2 | SEC 4.2 |
| DDR3 Memory Controller | DDR3/DDR3L, 1333 MHz, ECC | DDR3/DDR3L, 1333 MHz, ECC | DDR3/DDR3L, 1333 MHz, ECC | DDR3/DDR3L, 1333 MHz, ECC | DDR3/DDR3L, 1333 MHz, ECC | DDR3/DDR3L, 1333 MHz, ECC |
| PCIe Controllers | 3 | 3 | 3 | 3 | 3 | 3 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Wichtigste Unterscheidungsmerkmale
- Highest clock speed in the dual-core P5020 family (vs. P5020NSE1VNB)
- Extended temperature grade for industrial / outdoor deployment (vs. P5020NXE1VNB (same extended grade))
- Drop-in scale-up path to quad-core via P5040NXE7VNC (vs. P5020NXE1VNB)
- Integrated SEC 4.2 hardware encryption offload (vs. Discrete crypto accelerator designs)
Designhinweise
Estimated: P5020NXE1TNB at full load with two cores active dissipates approximately 8-12W depending on SerDes utilization. The 1295-FCBGA has a published theta_JA around 1.5 C/W with proper thermal-via array beneath the die. A heatsink or cold plate is mandatory; relying on convection alone will not keep Tj below 105C in a sealed enclosure. Plan for at least 200 LFM airflow or attach an aluminum heatsink with thermal interface material rated for the operating temperature range.
P5020NXE1TNB's 1295-FCBGA requires a high-density interconnect PCB with microvia build-up layers. NXP recommends an 8-10 layer stack-up with 1 oz copper on outer layers and 0.5 oz on inner layers, plus a continuous GND plane directly beneath the BGA for return-path integrity. Escape routing for the 1mm-pitch BGA must use dog-bone or via-in-pad fan-out. Series-termination resistors for SerDes lanes should be placed within 8 mm of the BGA balls to maintain signal integrity at 5-6 Gbps.
The P5020NXE1TNB requires multiple supply rails: VDD_CORE around 1.0V, VDD_DDR around 1.5V, VDD_SERDES around 1.0V, and VDD_IO at 2.5V or 3.3V. Use NXP's recommended PMIC or multi-phase buck controllers with output accuracy better than ±3%. Bulk decoupling requires 22uF ceramic plus 470uF polymer-tantalum on each major rail; high-frequency decoupling requires 100nF X7R within 2 mm of every supply pin group. Power-rail sequencing must follow the NXP reference design to avoid latch-up during hot-plug events.
Do not substitute the P5020NXE1TNB's FCBGA with a QFP alternative: no QFP variant exists for this device. The 'NB' suffix on P5020NXE1TNB indicates Extended temperature grade; using the standard-temperature P5020NSE1VNB in an outdoor enclosure will cause thermal shutdown. Finally, do not ignore the SEC firmware version - SEC 4.2 requires a specific firmware blob loaded at boot, and missing this blob leaves encryption operations non-functional even though the hardware accelerator is present.
Compliance-Informationen
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations not present in the verified web data; marked unknown rather than guessed. AEC-Q100 is not applicable because this is a high-performance communications SoC, not an automotive-qualified part.
