P82B96PWR - 2-Channel 2-15V I2C Bus Extender | TI (Tape & Reel)
Teilenummer: P82B96PWR ✓ AktivP82B96PWR Übersicht
The P82B96 family belongs to the bidirectional bus-buffer category, which includes I2C buffers, SMBus repeaters, level translators, and bus extenders. Unlike a unidirectional logic buffer, a bidirectional bus buffer must detect and preserve the direction of data while allowing both sides to drive and receive the same lines. This makes the device useful between a host controller and remote sensors, EEPROMs, FPGAs, embedded processors, or other I2C targets that operate at a different electrical reference or require additional bus drive capability.
The verified listing identifies P82B96PWR as a 2-channel, 400 kHz buffer/reDriver in an 8-pin TSSOP package. The manufacturer describes the device family as a 2-bit bidirectional 2- to 15-V I2C/SMBus buffer and cable extender. The operating temperature range shown in the verified part information is -40 °C to +85 °C. The PW package is a compact surface-mount form suitable for industrial and embedded board layouts, while the 2-bit configuration reduces the number of separate buffer packages needed when multiple related bus lines must be conditioned.
A key design consideration is the relationship between bus capacitance, cable or trace length, pull-up resistance, and supported clock rate. Buffering does not remove the need for correct I2C pull-up placement; it provides an intermediate drive point that can isolate the source-side and remote-side buses. The engineer should verify voltage compatibility on both sides, account for the maximum remote-bus loading, and test the complete network at the intended 400 kHz operating condition. The verified datasheet source should be consulted for detailed logic thresholds, timing, and application limits.
Typical uses include extending an I2C sensor bus in industrial control equipment, buffering an SMBus connection in a power system, separating a controller from a cable-connected peripheral, and bridging logic domains when voltage-level and current requirements differ. It is also useful in test fixtures and embedded platforms where a long cable or dense peripheral load would otherwise weaken the original bus. Compared with a simple series resistor or passive level shifter, the P82B96 provides an active bidirectional buffer and defined cable-extension function, while still requiring careful external pull-up and grounding design.
This product page consolidates the verified manufacturer description, distributor listing information, package identification, pricing reference, and application-oriented guidance. It does not infer unprovided electrical thresholds or invent a cross-brand substitute where the supplied cross-reference data does not establish pin compatibility. The result is intended to support initial component selection and PCB planning, followed by validation against the official P82B96 datasheet and application circuit.
Drop-in-Alternativen für P82B96PWR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit P82B96PWR (gleiche Bauform und Footprint).
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernP82B96PWR Technische Daten
| Product Type | 2-bit bidirectional bus buffer and cable extender |
| Bus Compatibility | I2C/SMBus compatible |
| Channel Count | 2 channels |
| Operating Voltage Range | 2 V to 15 V |
| Maximum Bus Frequency | 400 kHz |
| Bidirectional Data Transfer | Yes |
| Gehäuse | 8-pin TSSOP (PW) |
| Betriebstemperaturbereich | -40 °C to +85 °C |
| Montageart | Surface mount |
| DigiKey Description | Buffer, ReDriver 2 Channel 400kHz 8-TSSOP |
| Manufacturer Function | Bidirectional data transfer between I2C bus and other bus configurations with different voltage and current levels |
| Cable Extension Function | Yes |
| I2C Bus Standards | I2C and SMBus compatible |
| Output Drive Configuration | Dual bidirectional bus buffer |
| LCSC Price Reference | $3.8578 as of 2026-10-23 |
| Manufacturer Datasheet Source | Texas Instruments P82B96 I2C-compatible dual bidirectional bus buffer datasheet |
P82B96PWR 8-pin tssop (pw) Pinbelegungsleitfaden
Pinbelegung für P82B96PWR (8-pin tssop (pw)-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für P82B96PWR.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
P82B96PWR ist geeignet für 6 Anwendungs: Industrial I2C Sensor-Bus Extension, SMBus Power-System Isolation, Embedded Processor-to-Sensor Bus Segmentation, FPGA and Logic-Device Bus Conditioning, Remote Test and Measurement Fixture, Battery-Powered Sensor Hub Bus Extension.
Industrial I2C Sensor-Bus Extension
The P82B96PWR fits industrial systems that place remote temperature, pressure, or configuration sensors several cable positions away from a controller. Its verified 2 V to 15 V range and 400 kHz capability make it suitable for a buffered I2C segment, while the bidirectional structure lets the controller continue addressing and receiving data from the remote devices. Place the buffer between the local bus and the extended bus, provide separate pull-up networks appropriate to each side, and verify capacitance and rise time with the actual wiring.
Empfohlen
SMBus Power-System Isolation
A P82B96PWR can provide a bidirectional interface point in an SMBus-based power system where the supervisory controller and remote power-management circuitry are separated by wiring distance or load. The verified Texas Instruments description identifies I2C/SMBus compatibility and operation from 2 V to 15 V, allowing the buffer to bridge buses whose voltage and current conditions differ. The designer must still select the correct pull-up voltage, keep the return path continuous, and validate clock timing and fault behavior across the power system’s operating envelope.
Empfohlen
Embedded Processor-to-Sensor Bus Segmentation
The P82B96PWR is useful when an embedded processor must communicate with a remote sensor, EEPROM, or FPGA through a longer or more heavily loaded I2C branch. Its two bidirectional channels can support a paired bus segment, and the 400 kHz operating point aligns with the common I2C performance range identified by Texas Instruments. The buffer should be placed at a deliberate segmentation point rather than simply added in series; maintain local pull-ups on both sides and validate the complete network against the highest bus frequency and cable capacitance.
Empfohlen
FPGA and Logic-Device Bus Conditioning
A P82B96PWR can condition an I2C connection between an FPGA or other programmable logic device and a peripheral board. The active bidirectional buffer helps isolate the source-side and remote-side loads, while the verified 2 V to 15 V range gives the designer a broad rail-selection window. It does not alter the I2C protocol, so the FPGA logic must still generate valid start, address, data, and stop sequences. Confirm signal thresholds and timing in the final device datasheet before applying the buffer to high-speed or nonstandard bus configurations.
Empfohlen
Remote Test and Measurement Fixture
The P82B96PWR is appropriate for test fixtures where an instrument controller communicates with a probe card, remote module, or cable-connected sensor over I2C. Buffering can reduce the impact of fixture capacitance and provide a defined split between the controller-side and device-side buses. Because the verified information does not provide every threshold, delay, or drive-current detail, use the manufacturer datasheet for timing margins. External pull-ups, protection resistors, grounding, and cable length should be validated in the actual fixture arrangement.
Empfohlen
Battery-Powered Sensor Hub Bus Extension
A battery-powered sensor hub can use the P82B96PWR to extend an I2C branch to a remote sensor module without allowing the full cable capacitance to load the controller directly. The verified 2 V minimum operating voltage is relevant to low-voltage systems, while the 400 kHz limit provides a defined design ceiling. The active buffer’s additional current and external pull-up requirements must be included in a battery budget. Confirm the actual system’s low-voltage behavior, startup sequencing, and the datasheet’s recommended application circuit before production use.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für P82B96PWR – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | P82B96PWRR |
|---|---|---|
| Product type | 2-bit bidirectional I2C/SMBus buffer and cable extender | 2-bit bidirectional I2C/SMBus buffer and cable extender |
| Brand | Texas Instruments | Texas Instruments |
| Channel count | 2 channels | 2 channels |
| Operating voltage range | 2 V to 15 V | 2 V to 15 V |
| Maximum bus frequency | 400 kHz | 400 kHz |
| Bidirectional operation | Yes | Yes |
| Package | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) |
| Cable-extension function | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Bidirectional cable-extension function (vs. P82B96PWRR)
- Two-channel integration (vs. P82B96PWRR)
- Verified supply reference (vs. P82B96PWRR)
Designhinweise
Use separate pull-up networks on the controller-side and remote-side I2C buses, and place the P82B96PWR at the intended bus segmentation point. The verified device is rated for 400 kHz, but the complete wiring, pull-up resistance, capacitance, cable length, and clock timing must be checked together. Do not assume that inserting a buffer automatically preserves timing in a long or heavily loaded cable.
Keep the device, its local pull-ups, and any bypass or protection components close to the intended I2C branch. Maintain a continuous ground reference between the controller and remote bus, and route the two bidirectional channels consistently. The verified package is an 8-pin TSSOP (PW), so use the official TI land pattern and confirm pin functions against the P82B96 datasheet before fabrication.
Do not substitute P82B96PWRR for P82B96PWR solely because both names appear similar. The supplied data confirms the P82B96 family and 8-pin TSSOP/PW package context but does not provide a complete verified drop-in comparison. Check exact pinout, ordering suffix, temperature range, electrical limits, and assembly footprint against the manufacturer datasheet before substituting.
Compliance-Informationen
The supplied verified data does not include explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for P82B96PWR.
