PCM1717EG - 18-Bit Stereo Audio DAC | Texas Instruments
Teilenummer: PCM1717EG ✓ AktivPCM1717EG Übersicht
An audio DAC is a signal-conversion IC within the broader digital-to-analog converter, audio interface, and mixed-signal semiconductor hierarchy. Its role is to convert digital audio samples into left- and right-channel analog voltage signals for subsequent amplification, filtering, line output, or another audio-processing stage. The PCM1717EG combines an 18-bit conversion format with a serial digital interface suited to audio systems operating at up to 48 kHz.
The PCM1717EG accepts 18-bit input data and implements a complete stereo conversion function. Its 8x oversampling operation distinguishes it from a basic binary DAC by increasing the effective internal conversion rate relative to the incoming sample rate. The manufacturer documentation identifies both analog and digital supply sources, allowing system designers to separate the power domains used by the converter circuitry and its digital interface.
The 20-pin SSOP package provides a compact surface-mount implementation with a body width of 5.30 mm. The package includes 20 terminals, and the PCM1717EG variant is packaged in a tube. This combination makes the device suitable for audio boards where a stereo DAC, defined digital interface, and separated analog and digital power connections are required within a limited board footprint.
Typical uses include digital audio source equipment, compact stereo audio interfaces, and embedded audio products accepting I2S data. Its 18-bit resolution and 48 kHz capability make it most appropriate for designs whose source format and bandwidth requirements match those specifications. A replacement should be selected only after verifying the complete pinout, supply limits, clocking requirements, analog-output implementation, and package dimensions.
Designers should follow the manufacturer datasheet when assigning analog and digital supply pins, decoupling capacitors, and routed outputs. Because this converter participates in a mixed-signal signal path, maintain separation between digital clock and data traces and sensitive analog output routing. The usable audio bandwidth and fidelity also depend on the external reconstruction network, output loading, reference quality, and analog stage following the DAC.
This page organizes the exact PCM1717EG package, format, interface, and temperature information alongside verified drop-in candidates, application guidance, and PCB design considerations. It is intended to help engineers identify whether the device matches an audio architecture before beginning schematic capture, layout, sourcing, or production qualification.
Drop-in-Alternativen für PCM1717EG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PCM1717EG (gleiche Bauform und Footprint) – abweichend in Package.
PCM1717E
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PCM1717EGE6
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PCM1717EG4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PCM1717EG Grenzwerte & elektrische Eigenschaften
| Device Type | Stereo audio digital-to-analog converter |
| Auflösung | 18 bit |
| Maximum Sampling Rate | 48 kHz |
| Data Interface | Serial I2S |
| Channel Configuration | 2 channels (stereo) |
| Oversampling Ratio | 8x |
| Betriebstemperaturbereich | -40 °C to +85 °C |
| Gehäuse | 20-SSOP |
| Package Width | 5.30 mm |
| Package Width in Inches | 0.209 inch |
| Anzahl der Pins | 20 pins |
| Montageart | Surface mount |
| Packaging | Tube |
| Supply Source | Analog and digital |
PCM1717EG 0.209 inch Pinbelegungsleitfaden
Pinbelegung für PCM1717EG (0.209 inch-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für PCM1717EG.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PCM1717EG ist geeignet für 6 Anwendungs: Compact Digital Audio Source, Stereo Audio Interface, Embedded Audio Product, CD-Rate Audio Conversion, Digital-Audio Evaluation Board, Multimedia Audio Front End.
Compact Digital Audio Source
The PCM1717EG is appropriate for a compact digital audio source that accepts 18-bit I2S samples through 48 kHz and needs two analog output channels. Its 8x oversampling provides the internal conversion architecture identified by the Texas Instruments datasheet, while the 20-pin SSOP package limits board-space requirements. The converter can sit between an audio source controller and an analog line-output stage, with separate analog and digital supply connections helping organize the power domains. The implementation should follow the manufacturer decoupling and output-network guidance rather than treating the DAC as a standalone digital block.
Empfohlen
Stereo Audio Interface
PCM1717EG fits a stereo interface that receives I2S data from a digital audio engine and converts it into left- and right-channel analog signals. The verified 18-bit format, 48 kHz maximum sampling rate, and stereo channel arrangement align with conventional digital-audio interface requirements. Its 20-SSOP package provides 20 terminals in a 5.30 mm-wide body, allowing a routed implementation without a large connector footprint. Board-level success still depends on clean clocking, correctly separated analog and digital supplies, and an output stage matched to the converter characteristics.
Empfohlen
Embedded Audio Product
The PCM1717EG can support an embedded audio product when the host processor supplies 18-bit I2S data at a rate no higher than 48 kHz. The converter's stereo output reduces the number of separate DAC channels required, while 8x oversampling defines the digital-to-analog conversion approach stated in the manufacturer documentation. A -40 °C to +85 °C operating range makes the device a candidate for industrial-temperature embedded equipment. Validate the complete clock tree, analog reconstruction network, thermal conditions, and output load in the final system design.
Empfohlen
CD-Rate Audio Conversion
PCM1717EG is suitable for conversion of digital audio sourced at the standard 48 kHz CD sampling rate. Its interface accepts 18-bit data, and the manufacturer identifies 8x oversampling within the stereo DAC architecture. These parameters make it a practical choice when the source already supplies compatible I2S data and the design requires a conventional mixed-signal conversion stage. The analog path following the converter remains important, so use the manufacturer application information to select output loading, filtering, and downstream amplification.
Empfohlen
Digital-Audio Evaluation Board
PCM1717EG is useful on a digital-audio evaluation board that needs to inspect an 18-bit I2S conversion path at sampling rates through 48 kHz. The tube-packed 20-SSOP format supports prototype integration, while the defined stereo output enables direct comparison of left- and right-channel waveforms. A successful evaluation fixture should expose the digital interface, supply rails, analog outputs, and required support components. Keep test and measurement ground connections short and compare converter output against the manufacturer application reference for a trustworthy assessment.
Empfohlen
Multimedia Audio Front End
The PCM1717EG can serve as the stereo digital-to-analog stage in a multimedia front end when the upstream controller provides an 18-bit I2S stream at up to 48 kHz. Its dedicated stereo function and 8x oversampling provide a clear separation between digital source handling and analog output generation. The separate analog and digital supply pins support deliberate power partitioning on a mixed-signal board. Route clocks and data away from analog outputs, observe the manufacturer's output-network requirements, and verify signal integrity across every supported source format before production.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PCM1717EG – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PCM1717E | PCM1717EGE6 | PCM1717EG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit |
| Pin Count | 20 pins | 20 pins | 20 pins | 20 pins |
Wichtigste Unterscheidungsmerkmale
- Directly documented same-package replacement (vs. PCM1717EGE6)
- Same-package family substitution (vs. PCM1717EG4)
- Base-family electrical compatibility (vs. PCM1717E)
Designhinweise
Assign the PCB footprint from the manufacturer package drawing rather than from the generic 20-SSOP label alone. The verified body width is 5.30 mm, but land pattern, lead geometry, seating plane, and solder-mask clearance must also match the package drawing. Confirm that the footprint preserves the standard pin-1 orientation and adequate lead clearance before releasing Gerber files.
Separate digital data and clock routing from the analog output and reconstruction-network area. Keep I2S clock and data traces short, use a continuous reference plane where practical, and route analog outputs away from switching nodes. Because the PCM1717EG supports analog and digital supply sources, use deliberate partitioning and return-current planning to prevent digital currents from crossing the audio output reference.
Do not substitute a similarly named PCM1717 order code solely because its family name and package match. The available cross-reference identifies PCM1717E, PCM1717EGE6, and PCM1717EG4 as candidates, but suffixes can distinguish ordering, qualification, or packing details. Check the complete ordering table, temperature grade, package, and production packing before committing an alternative to the BOM.
Verify clock-edge timing and data validity against the source controller and the PCM1717 manufacturer electrical characteristics. The converter accepts 18-bit I2S data and supports sampling through 48 kHz, but those format limits do not by themselves guarantee timing margin. Use the manufacturer application information for clock routing and termination, and test worst-case source timing, startup, and mute transitions.
Compliance-Informationen
No explicit compliance conclusions for PCM1717EG were available in the referenced product and cross-reference material. Verify current RoHS, REACH, lead-free, halogen-free, and automotive qualification status against the manufacturer product page and ordering documentation.