Texas Instruments

PCM1717EG - 18-Bit Stereo Audio DAC | Texas Instruments

料号: PCM1717EG ✓ 量产中
Analog and digital Vdss 20-SSOP Package
最小起订量: 1 |

PCM1717EG 概述

Texas Instruments PCM1717EG is an 18-bit stereo audio digital-to-analog converter that accepts I2S serial audio data and supports sampling rates through 48 kHz. It is packaged in a 20-pin SSOP measuring 0.209 inch, or 5.30 mm, in width, and is supplied in a tube for through-hole production processes. The device also uses 8x oversampling according to the manufacturer documentation.

An audio DAC is a signal-conversion IC within the broader digital-to-analog converter, audio interface, and mixed-signal semiconductor hierarchy. Its role is to convert digital audio samples into left- and right-channel analog voltage signals for subsequent amplification, filtering, line output, or another audio-processing stage. The PCM1717EG combines an 18-bit conversion format with a serial digital interface suited to audio systems operating at up to 48 kHz.

The PCM1717EG accepts 18-bit input data and implements a complete stereo conversion function. Its 8x oversampling operation distinguishes it from a basic binary DAC by increasing the effective internal conversion rate relative to the incoming sample rate. The manufacturer documentation identifies both analog and digital supply sources, allowing system designers to separate the power domains used by the converter circuitry and its digital interface.

The 20-pin SSOP package provides a compact surface-mount implementation with a body width of 5.30 mm. The package includes 20 terminals, and the PCM1717EG variant is packaged in a tube. This combination makes the device suitable for audio boards where a stereo DAC, defined digital interface, and separated analog and digital power connections are required within a limited board footprint.

Typical uses include digital audio source equipment, compact stereo audio interfaces, and embedded audio products accepting I2S data. Its 18-bit resolution and 48 kHz capability make it most appropriate for designs whose source format and bandwidth requirements match those specifications. A replacement should be selected only after verifying the complete pinout, supply limits, clocking requirements, analog-output implementation, and package dimensions.

Designers should follow the manufacturer datasheet when assigning analog and digital supply pins, decoupling capacitors, and routed outputs. Because this converter participates in a mixed-signal signal path, maintain separation between digital clock and data traces and sensitive analog output routing. The usable audio bandwidth and fidelity also depend on the external reconstruction network, output loading, reference quality, and analog stage following the DAC.

This page organizes the exact PCM1717EG package, format, interface, and temperature information alongside verified drop-in candidates, application guidance, and PCB design considerations. It is intended to help engineers identify whether the device matches an audio architecture before beginning schematic capture, layout, sourcing, or production qualification.

直接替换替代料: PCM1717EG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PCM1717EG (相同外形与封装尺寸) ——差异在于 Package.

Texas Instruments
Package: 20-SSOP, 5.30 mm width
对比 PCM1717EG →

PCM1717E

✅ 直接替换
Texas Instruments
📦 20-SSOP
Stereo audio digital-to-analog converter · 18 bit · 48 kHz · 2 channels · I2S · Delta-sigma DAC · 8X · 18-bit input data

联系询价

查看数据手册 →

PCM1717EGE6

✅ 直接替换
📦 20-SSOP
Identical 18-bit stereo DAC function and package; cross-reference identifies no principal performance difference

📋 参考替代料(不在目录中)

PCM1717EG4

✅ 直接替换
📦 20-SSOP
Same 18-bit stereo DAC, terminal arrangement, and 20-pin SSOP package; suffix-specific ordering details differ

📋 参考替代料(不在目录中)

PCM1717EG 最大额定值与电气特性

Device Type Stereo audio digital-to-analog converter
分辨率 18 bit
Maximum Sampling Rate 48 kHz
Data Interface Serial I2S
Channel Configuration 2 channels (stereo)
Oversampling Ratio 8x
工作温度范围 -40 °C to +85 °C
封装 20-SSOP
Package Width 5.30 mm
Package Width in Inches 0.209 inch
引脚数 20 pins
安装类型 Surface mount
Packaging Tube
Supply Source Analog and digital

PCM1717EG 0.209 inch 引脚配置指南

PCM1717EG(0.209 inch 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

PCM1717EG 的 0.209 inch 封装引脚图

暂无详细引脚数据: PCM1717EG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PCM1717EG 适用于 6 应用s: Compact Digital Audio Source, Stereo Audio Interface, Embedded Audio Product, CD-Rate Audio Conversion, Digital-Audio Evaluation Board, Multimedia Audio Front End.

🎧

Compact Digital Audio Source

The PCM1717EG is appropriate for a compact digital audio source that accepts 18-bit I2S samples through 48 kHz and needs two analog output channels. Its 8x oversampling provides the internal conversion architecture identified by the Texas Instruments datasheet, while the 20-pin SSOP package limits board-space requirements. The converter can sit between an audio source controller and an analog line-output stage, with separate analog and digital supply connections helping organize the power domains. The implementation should follow the manufacturer decoupling and output-network guidance rather than treating the DAC as a standalone digital block.

🔧

Stereo Audio Interface

PCM1717EG fits a stereo interface that receives I2S data from a digital audio engine and converts it into left- and right-channel analog signals. The verified 18-bit format, 48 kHz maximum sampling rate, and stereo channel arrangement align with conventional digital-audio interface requirements. Its 20-SSOP package provides 20 terminals in a 5.30 mm-wide body, allowing a routed implementation without a large connector footprint. Board-level success still depends on clean clocking, correctly separated analog and digital supplies, and an output stage matched to the converter characteristics.

🏭

Embedded Audio Product

The PCM1717EG can support an embedded audio product when the host processor supplies 18-bit I2S data at a rate no higher than 48 kHz. The converter's stereo output reduces the number of separate DAC channels required, while 8x oversampling defines the digital-to-analog conversion approach stated in the manufacturer documentation. A -40 °C to +85 °C operating range makes the device a candidate for industrial-temperature embedded equipment. Validate the complete clock tree, analog reconstruction network, thermal conditions, and output load in the final system design.

💿

CD-Rate Audio Conversion

PCM1717EG is suitable for conversion of digital audio sourced at the standard 48 kHz CD sampling rate. Its interface accepts 18-bit data, and the manufacturer identifies 8x oversampling within the stereo DAC architecture. These parameters make it a practical choice when the source already supplies compatible I2S data and the design requires a conventional mixed-signal conversion stage. The analog path following the converter remains important, so use the manufacturer application information to select output loading, filtering, and downstream amplification.

📺

Digital-Audio Evaluation Board

PCM1717EG is useful on a digital-audio evaluation board that needs to inspect an 18-bit I2S conversion path at sampling rates through 48 kHz. The tube-packed 20-SSOP format supports prototype integration, while the defined stereo output enables direct comparison of left- and right-channel waveforms. A successful evaluation fixture should expose the digital interface, supply rails, analog outputs, and required support components. Keep test and measurement ground connections short and compare converter output against the manufacturer application reference for a trustworthy assessment.

🖥️

Multimedia Audio Front End

The PCM1717EG can serve as the stereo digital-to-analog stage in a multimedia front end when the upstream controller provides an 18-bit I2S stream at up to 48 kHz. Its dedicated stereo function and 8x oversampling provide a clear separation between digital source handling and analog output generation. The separate analog and digital supply pins support deliberate power partitioning on a mixed-signal board. Route clocks and data away from analog outputs, observe the manufacturer's output-network requirements, and verify signal integrity across every supported source format before production.

What is the PCM1717EG?
The PCM1717EG is a Texas Instruments 18-bit stereo audio digital-to-analog converter with an I2S serial interface and operation through 48 kHz. According to the manufacturer datasheet, it accepts 18-bit input data, uses 8x oversampling, and provides analog and digital supply connections. The device is packaged in a 20-pin SSOP with a 5.30 mm body width.
What are the key specifications of PCM1717EG that engineers should know?
The key PCM1717EG specifications are 18-bit resolution, stereo operation, an I2S serial data interface, support through 48 kHz, and 8x oversampling. The Texas Instruments datasheet identifies a 20-SSOP package, a -40 °C to +85 °C operating range, and separate analog and digital supply sources. These characteristics position the device for compact digital-to-analog conversion at standard CD-oriented audio rates.
What is the PCM1717EG operating temperature range?
The PCM1717EG operates from -40 °C to +85 °C. This operating range comes from the Texas Instruments PCM1717 datasheet information and covers industrial-temperature applications. Designers should still verify individual supply, output, and clock conditions against the complete manufacturer datasheet before releasing a production design.
Where can I download the PCM1717EG datasheet PDF?
The PCM1717EG datasheet PDF can be reached through the manufacturer-data listing at https://www.digchip.com/datasheets/parts/datasheet/477/PCM1717EG.php. The document identifies PCM1717E as the device family and PCM1717EG as the specified ordering variant. Use the pin-description table, electrical characteristics, and application information in that document for final schematic and layout decisions.
Where can I find the PCM1717EG pinout?
The PCM1717EG pinout must be taken from the pin-description table in the Texas Instruments PCM1717 datasheet rather than inferred from distributor listings. The verified package information confirms a 20-pin SSOP with 20 terminals. Before assigning tracks or power rails, verify each numbered pin, analog output, digital input, clock connection, supply, and ground function against the manufacturer document.
What audio formats does PCM1717EG support?
The PCM1717EG supports 18-bit I2S serial audio input and operates through a 48 kHz sampling rate. The Texas Instruments documentation also identifies 8x oversampling and a complete stereo DAC function. Its digital interface is intended for audio systems that can supply compatible serial data, clocking, and separate analog and digital power connections.
Is PCM1717EG suitable for a compact stereo audio interface?
Yes, the PCM1717EG is suitable for a compact stereo audio interface that accepts I2S data at up to 48 kHz. Its 18-bit conversion format, 8x oversampling, stereo output function, and 20-pin SSOP package support a space-conscious implementation. The final design should include suitable decoupling and an analog output stage designed around the manufacturer application guidance.
What is the difference between PCM1717EG and PCM1717EGE6?
PCM1717EG and PCM1717EGE6 are both identified as complete replacements using the same 20-pin SSOP format and consistent terminal and package characteristics. Their conversion resolution is listed as 18 bit, and the functional performance is described as consistent. Because ordering suffixes can encode packaging or qualification details, engineers should confirm the exact manufacturer ordering code before approving a substitution.
Can PCM1717EGE6 replace PCM1717EG on an existing PCB?
Yes, PCM1717EGE6 can replace PCM1717EG without PCB modifications according to the cross-reference information, which identifies matching terminals, package, and principal performance characteristics. The replacement retains the 20-pin SSOP format and 18-bit stereo DAC function. Production procurement should still verify the current ordering-information table and any packaging differences associated with the suffix.
When should I choose PCM1717EG over another PCM1717 variant?
Choose PCM1717EG when the design requires an 18-bit stereo DAC with I2S input, operation through 48 kHz, 8x oversampling, and the 20-SSOP package supplied in a tube. Select another documented drop-in candidate only when its exact suffix, qualification status, supply configuration, and ordering requirements satisfy the product specification. The choice should be driven by the complete ordering table rather than the base family name alone.
Is PCM1717EG suitable for digital audio source equipment?
Yes, PCM1717EG fits digital audio source equipment that supplies 18-bit I2S audio at up to 48 kHz and needs left- and right-channel analog outputs. Its 8x oversampling and separate analog and digital supply connections support a conventional mixed-signal DAC architecture. The following analog stage, load, and reconstruction network must be designed for the output characteristics in the manufacturer datasheet.
What can replace PCM1717EG?
PCM1717EGE6, PCM1717EG4, and PCM1717E are documented same-package candidates for PCM1717EG. Cross-reference information describes them as 20-pin SSOP stereo 18-bit DACs with compatible terminals and principal performance characteristics. Only five or fewer fully documented alternatives could be established from the available cross-reference material, and each should be checked against the current ordering information before procurement.
What is the best Texas Instruments equivalent for PCM1717EG?
PCM1717EGE6 is the clearest documented Texas Instruments equivalent because the cross-reference information identifies matching 20-pin SSOP terminals, package, 18-bit stereo DAC function, and consistent principal performance characteristics. PCM1717EG4 and PCM1717E are also same-package candidates. Confirm the exact suffix and any qualification or packing distinctions against the manufacturer ordering information.
Where can I buy PCM1717EG online?
Use the Request a Quote form on this page to ask about PCM1717EG availability, current lead time, and order handling. The request should include the exact 20-SSOP tube ordering code PCM1717EG and your target quantity. This keeps the inquiry tied to the specific device and avoids ambiguity with related PCM1717 order codes.
What is the price of PCM1717EG?
The current PCM1717EG price is not shown because the available listings do not provide a qualifying quantity-break table for this exact ordering code. Submit a Request a Quote through the form on this page with the required quantity and shipping destination. The quote process provides a current commercial response without embedding a potentially stale price in technical documentation.
What is the lead time and stock status for PCM1717EG?
Current lead time and stock status should be confirmed through the Request a Quote form on this page. Request the exact PCM1717EG ordering code, quantity, tube packaging requirement, and delivery destination. This confirms whether the manufacturer and authorized channels can supply the 20-SSOP variant and the quantity needed for the production schedule.

工程参考数据: PCM1717EG ——对比、设计指导和合规信息。

选型指南

Choose PCM1717EG for a new design requiring an 18-bit stereo DAC with I2S input, operation through 48 kHz, 8x oversampling, and a 20-SSOP package supplied in a tube. PCM1717EGE6 is the strongest documented drop-in alternative because the cross-reference explicitly identifies compatible terminals, package, and principal performance characteristics. PCM1717EG4 and PCM1717E also provide same-package candidates, but their exact ordering suffixes must be checked for qualification and packing requirements. Before substituting any candidate, compare the manufacturer ordering table, pin description, analog and digital supply limits, clocking conditions, output circuitry, temperature grade, and available package form. None of these alternatives should be selected solely by family name; confirm that the complete electrical and pin definitions match the PCB being reused.

与替代料对比

参数 本产品 PCM1717E PCM1717EGE6 PCM1717EG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 20-SSOP 20-SSOP 20-SSOP 20-SSOP
Converter Type Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC
Resolution 18 bit 18 bit 18 bit 18 bit
Pin Count 20 pins 20 pins 20 pins 20 pins

关键差异点

  • Directly documented same-package replacement (对比 PCM1717EGE6)
  • Same-package family substitution (对比 PCM1717EG4)
  • Base-family electrical compatibility (对比 PCM1717E)

设计说明

Assign the PCB footprint from the manufacturer package drawing rather than from the generic 20-SSOP label alone. The verified body width is 5.30 mm, but land pattern, lead geometry, seating plane, and solder-mask clearance must also match the package drawing. Confirm that the footprint preserves the standard pin-1 orientation and adequate lead clearance before releasing Gerber files.

Separate digital data and clock routing from the analog output and reconstruction-network area. Keep I2S clock and data traces short, use a continuous reference plane where practical, and route analog outputs away from switching nodes. Because the PCM1717EG supports analog and digital supply sources, use deliberate partitioning and return-current planning to prevent digital currents from crossing the audio output reference.

Do not substitute a similarly named PCM1717 order code solely because its family name and package match. The available cross-reference identifies PCM1717E, PCM1717EGE6, and PCM1717EG4 as candidates, but suffixes can distinguish ordering, qualification, or packing details. Check the complete ordering table, temperature grade, package, and production packing before committing an alternative to the BOM.

Verify clock-edge timing and data validity against the source controller and the PCM1717 manufacturer electrical characteristics. The converter accepts 18-bit I2S data and supports sampling through 48 kHz, but those format limits do not by themselves guarantee timing margin. Use the manufacturer application information for clock routing and termination, and test worst-case source timing, startup, and mute transitions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit compliance conclusions for PCM1717EG were available in the referenced product and cross-reference material. Verify current RoHS, REACH, lead-free, halogen-free, and automotive qualification status against the manufacturer product page and ordering documentation.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PCM1717EG datasheet PCM1717EG specifications PCM1717EG pinout PCM1717EG datasheet pdf PCM1717EG 18 bit DAC PCM1717EG 48 kHz I2S PCM1717EG 20-SSOP package PCM1717EG audio interface PCM1717EG equivalent PCM1717EG replacement PCM1717EG vs PCM1717EGE6 PCM1717EG price PCM1717EG stock Texas Instruments PCM1717EG PCM1717EG application circuit

相关元器件 & 术语

Texas Instruments PCM1717EG PCM1717E PCM1717EGE6 PCM1717EG4 digital-to-analog converter DAC stereo DAC audio converter audio interface mixed-signal semiconductor I2S 18-bit resolution 48 kHz sampling rate 8x oversampling 20-SSOP SSOP package family surface-mount package analog supply digital supply audio signal chain Texas Instruments PCM1717 datasheet PCM1717EG4 PCM1717EGE6 PCM1717E
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情