PCM1717EG - 18-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1717EG ✓ 啟用中PCM1717EG 概覽
An audio DAC is a signal-conversion IC within the broader digital-to-analog converter, audio interface, and mixed-signal semiconductor hierarchy. Its role is to convert digital audio samples into left- and right-channel analog voltage signals for subsequent amplification, filtering, line output, or another audio-processing stage. The PCM1717EG combines an 18-bit conversion format with a serial digital interface suited to audio systems operating at up to 48 kHz.
The PCM1717EG accepts 18-bit input data and implements a complete stereo conversion function. Its 8x oversampling operation distinguishes it from a basic binary DAC by increasing the effective internal conversion rate relative to the incoming sample rate. The manufacturer documentation identifies both analog and digital supply sources, allowing system designers to separate the power domains used by the converter circuitry and its digital interface.
The 20-pin SSOP package provides a compact surface-mount implementation with a body width of 5.30 mm. The package includes 20 terminals, and the PCM1717EG variant is packaged in a tube. This combination makes the device suitable for audio boards where a stereo DAC, defined digital interface, and separated analog and digital power connections are required within a limited board footprint.
Typical uses include digital audio source equipment, compact stereo audio interfaces, and embedded audio products accepting I2S data. Its 18-bit resolution and 48 kHz capability make it most appropriate for designs whose source format and bandwidth requirements match those specifications. A replacement should be selected only after verifying the complete pinout, supply limits, clocking requirements, analog-output implementation, and package dimensions.
Designers should follow the manufacturer datasheet when assigning analog and digital supply pins, decoupling capacitors, and routed outputs. Because this converter participates in a mixed-signal signal path, maintain separation between digital clock and data traces and sensitive analog output routing. The usable audio bandwidth and fidelity also depend on the external reconstruction network, output loading, reference quality, and analog stage following the DAC.
This page organizes the exact PCM1717EG package, format, interface, and temperature information alongside verified drop-in candidates, application guidance, and PCB design considerations. It is intended to help engineers identify whether the device matches an audio architecture before beginning schematic capture, layout, sourcing, or production qualification.
直接替換替代品,適用於 PCM1717EG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PCM1717EG (相同外形與佔位) — 差異在於 Package.
PCM1717E
✅ 直接替換聯絡詢價
查看資料表 →PCM1717EGE6
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1717EG4
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1717EG 最大額定值與電氣特性
| Device Type | Stereo audio digital-to-analog converter |
| 解析度 | 18 bit |
| Maximum Sampling Rate | 48 kHz |
| Data Interface | Serial I2S |
| Channel Configuration | 2 channels (stereo) |
| Oversampling Ratio | 8x |
| 工作溫度範圍 | -40 °C to +85 °C |
| 封裝 | 20-SSOP |
| Package Width | 5.30 mm |
| Package Width in Inches | 0.209 inch |
| 腳位數 | 20 pins |
| 安裝類型 | Surface mount |
| Packaging | Tube |
| Supply Source | Analog and digital |
PCM1717EG 0.209 inch 腳位配置指南
PCM1717EG(0.209 inch 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1717EG.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1717EG 適用於 6 應用s: Compact Digital Audio Source, Stereo Audio Interface, Embedded Audio Product, CD-Rate Audio Conversion, Digital-Audio Evaluation Board, Multimedia Audio Front End.
Compact Digital Audio Source
The PCM1717EG is appropriate for a compact digital audio source that accepts 18-bit I2S samples through 48 kHz and needs two analog output channels. Its 8x oversampling provides the internal conversion architecture identified by the Texas Instruments datasheet, while the 20-pin SSOP package limits board-space requirements. The converter can sit between an audio source controller and an analog line-output stage, with separate analog and digital supply connections helping organize the power domains. The implementation should follow the manufacturer decoupling and output-network guidance rather than treating the DAC as a standalone digital block.
推薦
Stereo Audio Interface
PCM1717EG fits a stereo interface that receives I2S data from a digital audio engine and converts it into left- and right-channel analog signals. The verified 18-bit format, 48 kHz maximum sampling rate, and stereo channel arrangement align with conventional digital-audio interface requirements. Its 20-SSOP package provides 20 terminals in a 5.30 mm-wide body, allowing a routed implementation without a large connector footprint. Board-level success still depends on clean clocking, correctly separated analog and digital supplies, and an output stage matched to the converter characteristics.
推薦
Embedded Audio Product
The PCM1717EG can support an embedded audio product when the host processor supplies 18-bit I2S data at a rate no higher than 48 kHz. The converter's stereo output reduces the number of separate DAC channels required, while 8x oversampling defines the digital-to-analog conversion approach stated in the manufacturer documentation. A -40 °C to +85 °C operating range makes the device a candidate for industrial-temperature embedded equipment. Validate the complete clock tree, analog reconstruction network, thermal conditions, and output load in the final system design.
推薦
CD-Rate Audio Conversion
PCM1717EG is suitable for conversion of digital audio sourced at the standard 48 kHz CD sampling rate. Its interface accepts 18-bit data, and the manufacturer identifies 8x oversampling within the stereo DAC architecture. These parameters make it a practical choice when the source already supplies compatible I2S data and the design requires a conventional mixed-signal conversion stage. The analog path following the converter remains important, so use the manufacturer application information to select output loading, filtering, and downstream amplification.
推薦
Digital-Audio Evaluation Board
PCM1717EG is useful on a digital-audio evaluation board that needs to inspect an 18-bit I2S conversion path at sampling rates through 48 kHz. The tube-packed 20-SSOP format supports prototype integration, while the defined stereo output enables direct comparison of left- and right-channel waveforms. A successful evaluation fixture should expose the digital interface, supply rails, analog outputs, and required support components. Keep test and measurement ground connections short and compare converter output against the manufacturer application reference for a trustworthy assessment.
推薦
Multimedia Audio Front End
The PCM1717EG can serve as the stereo digital-to-analog stage in a multimedia front end when the upstream controller provides an 18-bit I2S stream at up to 48 kHz. Its dedicated stereo function and 8x oversampling provide a clear separation between digital source handling and analog output generation. The separate analog and digital supply pins support deliberate power partitioning on a mixed-signal board. Route clocks and data away from analog outputs, observe the manufacturer's output-network requirements, and verify signal integrity across every supported source format before production.
推薦
推薦產品摘要
工程參考資料,適用於 PCM1717EG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PCM1717E | PCM1717EGE6 | PCM1717EG4 |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-SSOP | 20-SSOP | 20-SSOP | 20-SSOP |
| Converter Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
| Resolution | 18 bit | 18 bit | 18 bit | 18 bit |
| Pin Count | 20 pins | 20 pins | 20 pins | 20 pins |
主要差異化特點
- Directly documented same-package replacement (對比PCM1717EGE6)
- Same-package family substitution (對比PCM1717EG4)
- Base-family electrical compatibility (對比PCM1717E)
設計說明
Assign the PCB footprint from the manufacturer package drawing rather than from the generic 20-SSOP label alone. The verified body width is 5.30 mm, but land pattern, lead geometry, seating plane, and solder-mask clearance must also match the package drawing. Confirm that the footprint preserves the standard pin-1 orientation and adequate lead clearance before releasing Gerber files.
Separate digital data and clock routing from the analog output and reconstruction-network area. Keep I2S clock and data traces short, use a continuous reference plane where practical, and route analog outputs away from switching nodes. Because the PCM1717EG supports analog and digital supply sources, use deliberate partitioning and return-current planning to prevent digital currents from crossing the audio output reference.
Do not substitute a similarly named PCM1717 order code solely because its family name and package match. The available cross-reference identifies PCM1717E, PCM1717EGE6, and PCM1717EG4 as candidates, but suffixes can distinguish ordering, qualification, or packing details. Check the complete ordering table, temperature grade, package, and production packing before committing an alternative to the BOM.
Verify clock-edge timing and data validity against the source controller and the PCM1717 manufacturer electrical characteristics. The converter accepts 18-bit I2S data and supports sampling through 48 kHz, but those format limits do not by themselves guarantee timing margin. Use the manufacturer application information for clock routing and termination, and test worst-case source timing, startup, and mute transitions.
合規資訊
No explicit compliance conclusions for PCM1717EG were available in the referenced product and cross-reference material. Verify current RoHS, REACH, lead-free, halogen-free, and automotive qualification status against the manufacturer product page and ordering documentation.