Microchip Technology

PIC24FJ16MC102-E/SP - 32MHz 16-Bit Motor Control MCU | Microchip

Teilenummer: PIC24FJ16MC102-E/SP ✓ Aktiv
3 V to 3.6 V Vdss 28-pin SPDIP, 0.300 in body width and 7.62 mm row spacing Package 32 MHz Speed 16 KB Flash (5.5K x 24) Memory
MOQ: 1 |

PIC24FJ16MC102-E/SP Übersicht

The Microchip Technology PIC24FJ16MC102-E/SP is a 16-bit PIC24F motor-control microcontroller with 16 MIPS performance, 16 KB of Flash program memory, 1 KB of RAM, and operation up to 32 MHz. The device is housed in a 28-pin SPDIP package and combines CTMU, MCPWM, PPS, ADC, and communication peripherals for compact embedded motor-control systems.

A PIC24F microcontroller is a 16-bit RISC-based embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. The PIC24FJ16MC102 family is designed for low-cost motor-control applications where a compact pin count and dedicated timing peripherals provide an efficient alternative to more complex control architectures. Its 28-pin SPDIP package also simplifies breadboarding, prototyping, and through-hole assembly.

Key features include 16 MIPS execution capability, 16 KB of Flash memory organized as 5.5K x 24, 1 KB of SRAM, and a maximum operating frequency of 32 MHz. Motor-control support includes MCPWM channels and CTMU, while the peripheral set also includes comparators, power-on reset, pulse-width modulation, real-time clock, watchdog timer, multiple timers, and a 10-bit ADC. Communication interfaces include I2C, SPI, IrDA, and LINbus.

The 16-bit architecture and peripheral selection allow the PIC24FJ16MC102 to combine general-purpose control with dedicated motor functions in a single device. Its dual-master SPI interface, UART capability, and LINbus connectivity support communications with sensors, position devices, host controllers, and automotive-style networks. PPS provides accurate timing relationships between peripherals, while CTMU supports capacitance measurement and other analog front-end tasks.

Typical applications include small brushless DC motor controllers, stepper-motor position control, fan and pump controllers, appliance drive systems, automotive accessory modules, and compact industrial automation equipment. The 28-pin SPDIP package is particularly suitable for prototypes and through-hole products that benefit from easy inspection, rework, and socket-compatible assembly.

Designers should preserve the voltage and decoupling requirements specified by the manufacturer datasheet, and should verify ICSP programming access before assigning PCB pins. Because motor-control timing and mixed-signal performance depend on layout, keep power-loop paths compact, provide stable VDD connections, and route sensitive analog inputs away from switching nodes.

This page combines the device architecture, interface capabilities, package information, practical application guidance, and drop-in replacement analysis. It is intended to help engineers evaluate the PIC24FJ16MC102-E/SP for cost-sensitive embedded control while checking memory, timing, connectivity, thermal grade, and pin compatibility requirements before release to production.

Drop-in-Alternativen für PIC24FJ16MC102-E/SP – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FJ16MC102-E/SP (gleiche Bauform und Footprint) – abweichend in Motor-Control PWM, Mounting Type, Package, Product Type, Supply Voltage.

Microchip Technology
Motor-Control PWM: MCPWM peripherals
Mounting Type: Through-hole
Package: 28-pin SPDIP, 0.300 in (7.62 mm) pitch

PIC24FJ16MC102/SP

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 28-pin SPDIP
Same 28-pin SPDIP footprint and 16 KB Flash, 1 KB RAM, 32 MHz, and 16 MIPS ratings; ordering temperature-grade suffix differs.

📋 Referenzalternative (nicht im Katalog)

PIC24FJ16MC102-I/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP
16-bit motor-control microcontroller · Modified Harvard architecture · 32 MHz · 16 MIPS · 8 MHz · 4x · 16 KB (5.5K x 24 bits) · 1 KB

Preis auf Anfrage

Datenblatt ansehen →

PIC24FJ16MC102-E/SP

✅ Drop-In
Microchip Technology
📦 28-pin SPDIP
16-bit PIC24F motor-control microcontroller (device category) · 32 MHz · 16 MIPS · 16 KB Flash (5.5K x 24) · 1 KB RAM · 16-bit PIC RISC (processor architecture) · 3 V to 3.6 V · 28-pin SPDIP, 0.300 in body width and 7.62 mm row spacing

Preis auf Anfrage

Datenblatt ansehen →

PIC24FJ16MC102-E/SP Grenzwerte & elektrische Eigenschaften

Product Type 16-bit PIC24F motor-control microcontroller (device category)
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Program Memory 16 KB Flash (5.5K x 24)
Data Memory 1 KB RAM
Architecture 16-bit PIC RISC (processor architecture)
Versorgungsspannung 3 V to 3.6 V
Gehäuse 28-pin SPDIP, 0.300 in body width and 7.62 mm row spacing
Montageart Through-hole (mounting type)
Motor-Control PWM MCPWM peripheral (motor-control function)
Analog Peripheral CTMU peripheral (analog measurement function)
ADC Channels 6 channels, 10-bit (converter channel)
Connectivity I2C, SPI, IrDA, and LINbus (communication interfaces)
Timing Peripheral PPS peripheral (precision timing function)
Debug Interface ICSP with PGECx and PGEDx pairs (debug interface)
RoHS-Status Compliant (environmental compliance status)
Automotive Qualification AEC-Q100 qualified (automotive qualification status)

PIC24FJ16MC102-E/SP 28-pin spdip, 0.300 in body width and 7.62 mm row spacing Pinbelegungsleitfaden

Pinbelegung für PIC24FJ16MC102-E/SP (28-pin spdip, 0.300 in body width and 7.62 mm row spacing-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für PIC24FJ16MC102-E/SP im 28-pin spdip, 0.300 in body width and 7.62 mm row spacing-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für PIC24FJ16MC102-E/SP.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

PIC24FJ16MC102-E/SP ist geeignet für 6 Anwendungs: Brushless DC Motor Controller, Stepper Motor Position Control, Compact Fan and Pump Drive, Automotive Accessory Module, Appliance Motor Control Board, Low-Voltage Industrial Sensor Node.

⚡

Brushless DC Motor Controller

The PIC24FJ16MC102-E/SP fits compact brushless DC motor controllers because its MCPWM peripherals provide dedicated motor-control timing while its 16 MIPS processing capacity supports commutation logic and supervisory functions. The 10-bit ADC can sample motor-current or position feedback, and CTMU adds capacitance-measurement capability for sensing and protection. With 16 KB of Flash and 1 KB of RAM, the device can hold control code, calibration values, and a small state machine without requiring a separate processor. Its 3 V to 3.6 V operating range also aligns with many low-voltage motor-drive architectures, although the final bridge, gate driver, current sensing, and protection circuitry must be selected independently.

🏭

Stepper Motor Position Control

The PIC24FJ16MC102-E/SP is suitable for stepper-motor position controllers that require deterministic pulse generation, directional control, and limited position feedback. Its PWM resources can drive step and direction signals or support current shaping, while multiple timers can establish the required stepping cadence. The 32 MHz maximum operating frequency and 16 MIPS throughput leave processing capacity for acceleration profiles, homing routines, and communication handling. I2C or SPI can connect the controller to encoders, displays, or host systems, while LINbus can support networked appliance and industrial modules. Engineers should validate step-rate limits, motor-driver requirements, and thermal performance in the final mechanical and electrical system.

💡

Compact Fan and Pump Drive

The PIC24FJ16MC102-E/SP can control compact fans, circulation pumps, and small appliance motors where an economical 28-pin architecture is valuable. MCPWM can generate the motor-drive waveform, and the 10-bit ADC can monitor a speed or current feedback signal for closed-loop operation. The device operates from 3 V to 3.6 V and includes CTMU, comparators, timers, and watchdog support, providing useful resources for stall detection, startup sequencing, and fault handling. Its 16 KB of Flash accommodates a complete control application, while 1 KB of RAM is sufficient for modest state management. A production design must add the appropriate transistor or gate-driver stage and verify stall, startup, and overvoltage behavior.

🚗

Automotive Accessory Module

The PIC24FJ16MC102-E/SP can serve as the controller in a small automotive accessory module that needs local motor or solenoid control without a large application processor. Its AEC-Q100 qualification, 32 MHz maximum clock, and dedicated MCPWM and ADC resources support timing-sensitive control tasks. LINbus connectivity is particularly relevant for vehicle networks, while I2C and SPI allow expansion to sensors and nonvolatile storage. The 16 KB Flash and 1 KB RAM are adequate for focused accessory-control firmware rather than a full infotainment workload. Because automotive production also requires environmental, electromagnetic, functional-safety, and supply-chain assessment, the MCU qualification should form only one part of the complete vehicle-quality design review.

🔧

Appliance Motor Control Board

The PIC24FJ16MC102-E/SP fits appliance control boards that coordinate a motor, user interface, and simple sensor network on a single PCB. Its 16-bit architecture and 16 MIPS throughput support real-time motor sequencing and fault logic, while I2C, SPI, IrDA, and LINbus provide several ways to connect displays, sensors, and external controllers. The 28-pin SPDIP package is straightforward for prototypes and through-hole production, while CTMU, comparators, timers, watchdog, and PPS support robust control and timing. A 16 KB Flash budget can hold application firmware, and 1 KB of RAM supports basic state variables. Engineers should partition motor-power traces from sensitive signals and retain the programming interface for firmware updates.

🧩

Low-Voltage Industrial Sensor Node

The PIC24FJ16MC102-E/SP can act as the local controller in a low-voltage industrial sensor node that monitors analog or digital inputs and drives a small actuator. The 10-bit ADC, CTMU, comparators, and multiple timers support measurement and threshold functions, while I2C and SPI accommodate sensors and external nonvolatile memory. At up to 32 MHz and 16 MIPS, the controller can combine sampling, filtering, diagnostics, and communications without a high-power processor. Its 3 V to 3.6 V supply range simplifies integration with regulated industrial rails, although isolation, surge protection, and wide-temperature requirements may need external components. Use the watchdog and communications timeout mechanisms to recover safely from sensor or network faults.

Zusammenfassung der empfohlenen Produkte

PIC24FJ16MC102/SP Same-family motor-control MCU in the same package Verwendet in: Brushless DC Motor Controller, Stepper Motor Position Control, Compact Fan and Pump Drive, Automotive Accessory Module, Appliance Motor Control Board, Low-Voltage Industrial Sensor Node PIC24FJ16MC102-I/SP Microchip Technology Verwendet in: Brushless DC Motor Controller, Stepper Motor Position Control, Compact Fan and Pump Drive, Automotive Accessory Module, Appliance Motor Control Board, Low-Voltage Industrial Sensor Node
What is the PIC24FJ16MC102-E/SP and what is its main performance rating?
The PIC24FJ16MC102-E/SP is a 16-bit PIC24F motor-control microcontroller rated for 16 MIPS, a 32 MHz maximum CPU frequency, and operation from 3 V to 3.6 V. According to the Microchip PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 data sheet 30009997e, the device combines 16 KB of Flash program memory with 1 KB of RAM in a 28-pin SPDIP package. Its CTMU and MCPWM peripherals make it suitable for compact low-cost motor-control designs.
What memory and processing capacity does the PIC24FJ16MC102-E/SP provide?
The PIC24FJ16MC102-E/SP provides 16 KB of Flash program memory, organized as 5.5K x 24 words, together with 1 KB of SRAM. Its 16-bit PIC processor executes up to 16 MIPS at a maximum clock frequency of 32 MHz. The Microchip manufacturer product page identifies the device as part of an ultra-low-cost, high-performance 16-bit motor-control family, making this MCU appropriate for compact embedded controllers where memory and instruction throughput are more important than high-end general-purpose processing.
Where can I download the PIC24FJ16MC102-E/SP datasheet PDF?
The official PIC24FJ16MC102-E/SP datasheet PDF is available from Microchip at https://ww1.microchip.com/downloads/en/DeviceDoc/30009997e.pdf. Document 30009997e covers the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 family and includes electrical characteristics, peripheral information, pin definitions, and application guidance. Use the pin-description table and package drawings in that document when assigning a 28-pin SPDIP footprint or designing the programming header.
Where can I find the PIC24FJ16MC102-E/SP pinout?
The PIC24FJ16MC102-E/SP pinout is found in the pin-description tables and package drawings in Microchip data sheet 30009997e. The device uses a 28-pin SPDIP outline with a stated 0.300-inch, or 7.62 mm, row spacing. When assigning signals, check the complete VDD, VSS, programming, oscillator, and I/O assignments together rather than relying on a generic 28-pin diagram. ICSP programming requires an available PGECx and PGEDx pair.
What peripherals are available on the PIC24FJ16MC102-E/SP?
The PIC24FJ16MC102-E/SP includes CTMU, MCPWM, PPS, comparators, power-on reset, pulse-width modulation, a real-time clock, a watchdog timer, multiple timers, and a 10-bit ADC. According to the Microchip manufacturer product page, the family is designed around CTMU, MCPWM, and PPS for motor-control applications. The peripheral set also supports general timing, analog measurement, fault detection, and communications, allowing a compact control board to avoid unnecessary external components.
Which communication interfaces does the PIC24FJ16MC102-E/SP support?
The PIC24FJ16MC102-E/SP supports I2C, SPI, IrDA, and LINbus connectivity, as identified by the Microchip documents and technical product listing for the exact device. These interfaces cover sensor peripherals, external flash or storage, industrial modules, and LIN-based networks. The device also provides dual-master SPI capability. Confirm protocol, pin multiplexing, and peripheral-instance availability in the manufacturer pin-description table before assigning simultaneous bus connections.
Is the PIC24FJ16MC102-E/SP suitable for brushless DC motor control?
The PIC24FJ16MC102-E/SP is suitable for compact brushless DC motor-control designs because it combines MCPWM channels, CTMU, a 10-bit ADC, and 16 MIPS of processing performance. The Microchip PIC24FJ16MC102 family is specifically positioned as a low-cost, high-performance motor-control MCU family. Use the MCPWM and ADC to generate timing and obtain feedback, while the 1 KB RAM and 16 KB Flash provide space for control code, parameters, and a compact state machine.
When should I choose the PIC24FJ16MC102-E/SP instead of the PIC24FJ16MC102-I/SP?
Choose the PIC24FJ16MC102-E/SP when the design needs the extended-temperature suffix and the manufacturer qualification associated with the -E/SP ordering code. The PIC24FJ16MC102-I/SP is the closest same-package alternative identified for the device, retaining the 28-pin SPDIP footprint and the same 16 KB Flash, 1 KB RAM, 32 MHz, and 16 MIPS headline ratings. Review the exact temperature limits and qualification statements in the Microchip ordering information before selecting between the two suffixes.
What is the difference between PIC24FJ16MC102-E/SP and PIC24FJ16MC102/SP?
PIC24FJ16MC102-E/SP and PIC24FJ16MC102/SP share the same PIC24FJ16MC102 base device and 28-pin SPDIP package, while the ordering suffix identifies a different temperature-grade option. The closest same-family alternatives retain the 16 KB Flash, 1 KB RAM, 32 MHz maximum frequency, and 16 MIPS performance ratings. Because the suffix can alter temperature range and qualification rather than basic logic functionality, use the manufacturer ordering table to determine which grade is appropriate for the product environment.
What can replace the PIC24FJ16MC102-E/SP as a drop-in part?
The closest drop-in replacement is the PIC24FJ16MC102-I/SP, which uses the same 28-pin SPDIP footprint and retains the same 16 KB Flash, 1 KB RAM, 32 MHz maximum frequency, and 16 MIPS ratings. The PIC24FJ16MC102/SP is another same-family, same-package option with the same core memory and performance. Neither option should be selected solely from the package code: verify pin multiplexing, temperature limits, qualification, and supply availability before production release.
Is there a cross-brand drop-in equivalent for the PIC24FJ16MC102-E/SP?
No cross-brand drop-in equivalent has been established for the PIC24FJ16MC102-E/SP. The manufacturer family provides same-brand alternatives in the identical 28-pin SPDIP package, but cross-brand microcontrollers generally differ in peripheral mapping, programming tools, interrupt architecture, and mixed-signal functions even when package dimensions match. For a second-source design, treat any candidate as a redesign unless a manufacturer cross-reference explicitly confirms pin-to-pin and peripheral compatibility.
Where can I buy the PIC24FJ16MC102-E/SP and check its lead time?
Use the Request a Quote form on this page to request the PIC24FJ16MC102-E/SP, current availability, lead time, and required packaging. The manufacturer product page identifies the base PIC24FJ16MC102 family, and the target ordering code is specified as a 28-pin SPDIP device. For production planning, provide the required quantity, tube or reel preference, date code, and target delivery schedule so the quote can reflect the correct exact MPN rather than a related package suffix.
What is the current price of the PIC24FJ16MC102-E/SP?
The current commercial terms for the PIC24FJ16MC102-E/SP should be requested through the Request a Quote form on this page. The quote should reference the exact ordering code, 28-pin SPDIP package, and required quantity. Because component pricing and availability can change with inventory, production volume, and packaging, request a current quotation rather than relying on a historical catalog figure. Include your annual usage and target date when requesting the quotation.
Is the PIC24FJ16MC102-E/SP currently in stock?
Current inventory for the PIC24FJ16MC102-E/SP should be confirmed through the Request a Quote form on this page. The device is identified by its manufacturer as an ultra-low-cost, high-performance 16-bit motor-control MCU, and authorized distribution listings indicate active sourcing activity. For an accepted production order, request a quantity-specific availability statement, lead time, date code, and packaging details for the exact -E/SP ordering code.
What programming and debugging tools are compatible with the PIC24FJ16MC102-E/SP?
The PIC24FJ16MC102-E/SP supports ICSP debugging through compatible PGECx and PGEDx pin pairs, and it is also supported by the PIC24FJ16MC102 development ecosystem described by Northern Software. The Microchip PIM information sheet also identifies the dsPICDEM MCLV and MCHV development boards as demonstration platforms for the PIC24FJ16MC102 motor-control capabilities. Select an MPLAB-compatible toolchain and programming adapter, and confirm that the selected tool supports this exact PIC24FJ16MC102 device variant.
What are the key specifications of the PIC24FJ16MC102-E/SP that engineers should know?
The key PIC24FJ16MC102-E/SP specifications are 16 MIPS performance, a 32 MHz maximum clock, 16 KB of Flash program memory, 1 KB of RAM, a 3 V to 3.6 V supply range, and a 28-pin SPDIP package. According to Microchip data sheet 30009997e, the device also provides MCPWM, CTMU, PPS, a 10-bit ADC, timers, watchdog, and communication interfaces including I2C, SPI, IrDA, and LINbus. These parameters define its fit for compact, cost-sensitive embedded motor control.
Is the PIC24FJ16MC102-E/SP compliant for automotive and environmental applications?
The PIC24FJ16MC102-E/SP is identified as AEC-Q100 automotive-qualified and RoHS-compliant in the manufacturer-linked product information for the exact ordering code. Confirm the qualification temperature range, grade, and application suitability against the Microchip product page and data sheet 30009997e. Environmental compliance for one ordering suffix does not automatically establish every regional substance or process requirement, so those obligations should remain separate engineering and purchasing controls.

Technische Referenzdaten für PIC24FJ16MC102-E/SP – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the PIC24FJ16MC102-E/SP when the design uses the -E/SP ordering grade and requires a 16-bit motor-control MCU with 32 MHz performance, 16 KB of Flash, 1 KB of RAM, MCPWM, CTMU, and a 10-bit ADC in a 28-pin SPDIP package. The PIC24FJ16MC102/SP is appropriate when the standard ordering grade meets the environmental requirement and the same core resources are sufficient. Consider the PIC24FJ16MC102-I/SP when its industrial temperature grade matches the product environment and certification plan. None of these close alternatives should replace the target without checking temperature limits and qualification. Cross-brand MCU substitutions should be treated as redesigns rather than drop-ins because pin multiplexing, interrupt behavior, peripherals, and programming support can differ even when the package outline matches.

Vergleich mit Alternativen

Parameter Dieses Produkt PIC24FJ16MC102/SP PIC24FJ16MC102-I/SP PIC24FJ16MC102-E/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Instruction Throughput 16 MIPS 16 MIPS 16 MIPS 16 MIPS
Program Memory 16 KB Flash (5.5K x 24) 16 KB Flash 16 KB Flash 16 KB Flash
Data Memory 1 KB RAM 1 KB RAM 1 KB RAM 1 KB RAM
Supply Voltage 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
Connectivity I2C, SPI, IrDA, and LINbus I2C, SPI, IrDA, and LINbus I2C, SPI, IrDA, and LINbus I2C, SPI, IrDA, and LINbus
Motor-Control Peripheral MCPWM and CTMU MCPWM and CTMU MCPWM and CTMU MCPWM and CTMU
ADC 6-channel 10-bit ADC 6-channel 10-bit ADC 6-channel 10-bit ADC 6-channel 10-bit ADC

Wichtigste Unterscheidungsmerkmale

  • Exact same-family pin-compatible configuration (vs. PIC24FJ16MC102-I/SP)
  • Dedicated motor-control integration in a 28-pin package (vs. PIC24FJ16MC102/SP)
  • Connectivity suitable for embedded motor systems (vs. PIC24FJ16MC102-E/SP)

Designhinweise

Reserve an ICSP programming header that exposes VDD, VSS, MCLR, PGECx, and PGEDx. Any PGECx and PGEDx pair must be treated as a matched programming and debug path. Place the connector where the programming cable can reach without crossing motor-power or high-voltage isolation barriers. Confirm the selected adapter's voltage and pin compatibility before the PCB layout is released.

Separate motor-drive current paths from MCU power and analog-sensing routes. Keep the VDD and decoupling network compact, provide a low-impedance return path, and route motor-node signals away from the ADC and CTMU inputs. Ground partitioning should follow the complete power circuit rather than creating separate isolated ground regions. PCB review should verify that switching-node copper does not extend beneath sensitive control or communication traces.

Do not treat equal package dimensions as sufficient proof of drop-in compatibility. Verify the exact suffix temperature grade, alternate-function mappings, peripheral availability, programming configuration, and clock requirements for the production build. The PIC24FJ16MC102/SP, PIC24FJ16MC102-I/SP, and PIC24FJ16MC102-E/SP share the core 28-pin SPDIP format, but qualification and environmental requirements can still differ between ordering codes.

The MCU's stated 3 V to 3.6 V operating range does not define the complete motor-supply requirement. Decouple each VDD connection according to the manufacturer datasheet, use a local low-noise source for the microcontroller, and avoid routing motor-current returns through the logic ground path. Where the bridge and MCU share a supply, verify startup, transient, and brownout behavior across motor operating states.

Compliance-Informationen

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

RoHS compliance and AEC-Q100 qualification are identified for the exact PIC24FJ16MC102-E/SP ordering code. REACH, lead-free, halogen-free, and conflict-minerals status were not stated and remain unknown.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

PIC24FJ16MC102-E/SP datasheet PIC24FJ16MC102-E/SP pinout PIC24FJ16MC102-E/SP datasheet pdf PIC24FJ16MC102-E/SP equivalent PIC24FJ16MC102-E/SP replacement PIC24FJ16MC102-E/SP cross reference PIC24FJ16MC102-E/SP footprint PIC24FJ16MC102 28-pin SPDIP PIC24FJ16MC102 32MHz 16 MIPS PIC24FJ16MC102 motor control application PIC24FJ16MC102-E/SP vs PIC24FJ16MC102-I/SP Microchip PIC24FJ16MC102-E/SP PIC24FJ16MC102-E/SP price PIC24FJ16MC102-E/SP stock

Verwandte Bauteile & Begriffe

Microchip Technology PIC24FJ16MC102-E/SP PIC24FJ16MC102 PIC24FJ16MC102/SP PIC24FJ16MC102-I/SP PIC24F 16-bit RISC microcontroller embedded microcontroller motor-control MCU semiconductor MCPWM CTMU PPS 10-bit ADC I2C SPI IrDA LINbus ICSP 28-pin SPDIP DIP package family through-hole technology surface-mount electronics RoHS AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen