PIC24FJ16MC102-E/SP - 32MHz 16-Bit Motor Control MCU | Microchip
部品番号: PIC24FJ16MC102-E/SP ✓ 生産中PIC24FJ16MC102-E/SP 概要
A PIC24F microcontroller is a 16-bit RISC-based embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. The PIC24FJ16MC102 family is designed for low-cost motor-control applications where a compact pin count and dedicated timing peripherals provide an efficient alternative to more complex control architectures. Its 28-pin SPDIP package also simplifies breadboarding, prototyping, and through-hole assembly.
Key features include 16 MIPS execution capability, 16 KB of Flash memory organized as 5.5K x 24, 1 KB of SRAM, and a maximum operating frequency of 32 MHz. Motor-control support includes MCPWM channels and CTMU, while the peripheral set also includes comparators, power-on reset, pulse-width modulation, real-time clock, watchdog timer, multiple timers, and a 10-bit ADC. Communication interfaces include I2C, SPI, IrDA, and LINbus.
The 16-bit architecture and peripheral selection allow the PIC24FJ16MC102 to combine general-purpose control with dedicated motor functions in a single device. Its dual-master SPI interface, UART capability, and LINbus connectivity support communications with sensors, position devices, host controllers, and automotive-style networks. PPS provides accurate timing relationships between peripherals, while CTMU supports capacitance measurement and other analog front-end tasks.
Typical applications include small brushless DC motor controllers, stepper-motor position control, fan and pump controllers, appliance drive systems, automotive accessory modules, and compact industrial automation equipment. The 28-pin SPDIP package is particularly suitable for prototypes and through-hole products that benefit from easy inspection, rework, and socket-compatible assembly.
Designers should preserve the voltage and decoupling requirements specified by the manufacturer datasheet, and should verify ICSP programming access before assigning PCB pins. Because motor-control timing and mixed-signal performance depend on layout, keep power-loop paths compact, provide stable VDD connections, and route sensitive analog inputs away from switching nodes.
This page combines the device architecture, interface capabilities, package information, practical application guidance, and drop-in replacement analysis. It is intended to help engineers evaluate the PIC24FJ16MC102-E/SP for cost-sensitive embedded control while checking memory, timing, connectivity, thermal grade, and pin compatibility requirements before release to production.
ドロップイン代替品: PIC24FJ16MC102-E/SP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC24FJ16MC102-E/SP (同一形状・フットプリント) — 相違点: Motor-Control PWM, Mounting Type, Package, Product Type, Supply Voltage.
PIC24FJ16MC102/SP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
PIC24FJ16MC102-I/SP
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24FJ16MC102-E/SP
✅ ドロップイン価格はお問い合わせください
データシートを見る →PIC24FJ16MC102-E/SP 最大定格&電気的特性
| Product Type | 16-bit PIC24F motor-control microcontroller (device category) |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 16 KB Flash (5.5K x 24) |
| Data Memory | 1 KB RAM |
| Architecture | 16-bit PIC RISC (processor architecture) |
| 電源電圧 | 3 V to 3.6 V |
| パッケージ | 28-pin SPDIP, 0.300 in body width and 7.62 mm row spacing |
| 実装タイプ | Through-hole (mounting type) |
| Motor-Control PWM | MCPWM peripheral (motor-control function) |
| Analog Peripheral | CTMU peripheral (analog measurement function) |
| ADC Channels | 6 channels, 10-bit (converter channel) |
| Connectivity | I2C, SPI, IrDA, and LINbus (communication interfaces) |
| Timing Peripheral | PPS peripheral (precision timing function) |
| Debug Interface | ICSP with PGECx and PGEDx pairs (debug interface) |
| RoHS ステータス | Compliant (environmental compliance status) |
| Automotive Qualification | AEC-Q100 qualified (automotive qualification status) |
PIC24FJ16MC102-E/SP 28-pin spdip, 0.300 in body width and 7.62 mm row spacing ピン配置ガイド
PIC24FJ16MC102-E/SP (28-pin spdip, 0.300 in body width and 7.62 mm row spacing パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: PIC24FJ16MC102-E/SP.
詳細は データシート をご参照ください。
主な用途
PIC24FJ16MC102-E/SP の用途: 6 件s: Brushless DC Motor Controller, Stepper Motor Position Control, Compact Fan and Pump Drive, Automotive Accessory Module, Appliance Motor Control Board, Low-Voltage Industrial Sensor Node.
Brushless DC Motor Controller
The PIC24FJ16MC102-E/SP fits compact brushless DC motor controllers because its MCPWM peripherals provide dedicated motor-control timing while its 16 MIPS processing capacity supports commutation logic and supervisory functions. The 10-bit ADC can sample motor-current or position feedback, and CTMU adds capacitance-measurement capability for sensing and protection. With 16 KB of Flash and 1 KB of RAM, the device can hold control code, calibration values, and a small state machine without requiring a separate processor. Its 3 V to 3.6 V operating range also aligns with many low-voltage motor-drive architectures, although the final bridge, gate driver, current sensing, and protection circuitry must be selected independently.
おすすめ
Stepper Motor Position Control
The PIC24FJ16MC102-E/SP is suitable for stepper-motor position controllers that require deterministic pulse generation, directional control, and limited position feedback. Its PWM resources can drive step and direction signals or support current shaping, while multiple timers can establish the required stepping cadence. The 32 MHz maximum operating frequency and 16 MIPS throughput leave processing capacity for acceleration profiles, homing routines, and communication handling. I2C or SPI can connect the controller to encoders, displays, or host systems, while LINbus can support networked appliance and industrial modules. Engineers should validate step-rate limits, motor-driver requirements, and thermal performance in the final mechanical and electrical system.
おすすめ
Compact Fan and Pump Drive
The PIC24FJ16MC102-E/SP can control compact fans, circulation pumps, and small appliance motors where an economical 28-pin architecture is valuable. MCPWM can generate the motor-drive waveform, and the 10-bit ADC can monitor a speed or current feedback signal for closed-loop operation. The device operates from 3 V to 3.6 V and includes CTMU, comparators, timers, and watchdog support, providing useful resources for stall detection, startup sequencing, and fault handling. Its 16 KB of Flash accommodates a complete control application, while 1 KB of RAM is sufficient for modest state management. A production design must add the appropriate transistor or gate-driver stage and verify stall, startup, and overvoltage behavior.
おすすめ
Automotive Accessory Module
The PIC24FJ16MC102-E/SP can serve as the controller in a small automotive accessory module that needs local motor or solenoid control without a large application processor. Its AEC-Q100 qualification, 32 MHz maximum clock, and dedicated MCPWM and ADC resources support timing-sensitive control tasks. LINbus connectivity is particularly relevant for vehicle networks, while I2C and SPI allow expansion to sensors and nonvolatile storage. The 16 KB Flash and 1 KB RAM are adequate for focused accessory-control firmware rather than a full infotainment workload. Because automotive production also requires environmental, electromagnetic, functional-safety, and supply-chain assessment, the MCU qualification should form only one part of the complete vehicle-quality design review.
おすすめ
Appliance Motor Control Board
The PIC24FJ16MC102-E/SP fits appliance control boards that coordinate a motor, user interface, and simple sensor network on a single PCB. Its 16-bit architecture and 16 MIPS throughput support real-time motor sequencing and fault logic, while I2C, SPI, IrDA, and LINbus provide several ways to connect displays, sensors, and external controllers. The 28-pin SPDIP package is straightforward for prototypes and through-hole production, while CTMU, comparators, timers, watchdog, and PPS support robust control and timing. A 16 KB Flash budget can hold application firmware, and 1 KB of RAM supports basic state variables. Engineers should partition motor-power traces from sensitive signals and retain the programming interface for firmware updates.
おすすめ
Low-Voltage Industrial Sensor Node
The PIC24FJ16MC102-E/SP can act as the local controller in a low-voltage industrial sensor node that monitors analog or digital inputs and drives a small actuator. The 10-bit ADC, CTMU, comparators, and multiple timers support measurement and threshold functions, while I2C and SPI accommodate sensors and external nonvolatile memory. At up to 32 MHz and 16 MIPS, the controller can combine sampling, filtering, diagnostics, and communications without a high-power processor. Its 3 V to 3.6 V supply range simplifies integration with regulated industrial rails, although isolation, surge protection, and wide-temperature requirements may need external components. Use the watchdog and communications timeout mechanisms to recover safely from sensor or network faults.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC24FJ16MC102-E/SP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC24FJ16MC102/SP | PIC24FJ16MC102-I/SP | PIC24FJ16MC102-E/SP |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Program Memory | 16 KB Flash (5.5K x 24) | 16 KB Flash | 16 KB Flash | 16 KB Flash |
| Data Memory | 1 KB RAM | 1 KB RAM | 1 KB RAM | 1 KB RAM |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Connectivity | I2C, SPI, IrDA, and LINbus | I2C, SPI, IrDA, and LINbus | I2C, SPI, IrDA, and LINbus | I2C, SPI, IrDA, and LINbus |
| Motor-Control Peripheral | MCPWM and CTMU | MCPWM and CTMU | MCPWM and CTMU | MCPWM and CTMU |
| ADC | 6-channel 10-bit ADC | 6-channel 10-bit ADC | 6-channel 10-bit ADC | 6-channel 10-bit ADC |
主な差別化要因
- Exact same-family pin-compatible configuration (vs PIC24FJ16MC102-I/SP)
- Dedicated motor-control integration in a 28-pin package (vs PIC24FJ16MC102/SP)
- Connectivity suitable for embedded motor systems (vs PIC24FJ16MC102-E/SP)
設計ノート
Reserve an ICSP programming header that exposes VDD, VSS, MCLR, PGECx, and PGEDx. Any PGECx and PGEDx pair must be treated as a matched programming and debug path. Place the connector where the programming cable can reach without crossing motor-power or high-voltage isolation barriers. Confirm the selected adapter's voltage and pin compatibility before the PCB layout is released.
Separate motor-drive current paths from MCU power and analog-sensing routes. Keep the VDD and decoupling network compact, provide a low-impedance return path, and route motor-node signals away from the ADC and CTMU inputs. Ground partitioning should follow the complete power circuit rather than creating separate isolated ground regions. PCB review should verify that switching-node copper does not extend beneath sensitive control or communication traces.
Do not treat equal package dimensions as sufficient proof of drop-in compatibility. Verify the exact suffix temperature grade, alternate-function mappings, peripheral availability, programming configuration, and clock requirements for the production build. The PIC24FJ16MC102/SP, PIC24FJ16MC102-I/SP, and PIC24FJ16MC102-E/SP share the core 28-pin SPDIP format, but qualification and environmental requirements can still differ between ordering codes.
The MCU's stated 3 V to 3.6 V operating range does not define the complete motor-supply requirement. Decouple each VDD connection according to the manufacturer datasheet, use a local low-noise source for the microcontroller, and avoid routing motor-current returns through the logic ground path. Where the bridge and MCU share a supply, verify startup, transient, and brownout behavior across motor operating states.
コンプライアンス情報
RoHS compliance and AEC-Q100 qualification are identified for the exact PIC24FJ16MC102-E/SP ordering code. REACH, lead-free, halogen-free, and conflict-minerals status were not stated and remain unknown.