PIC24FJ16MC102-E/SP - 32MHz 16-Bit Motor Control MCU | Microchip
MPN: PIC24FJ16MC102-E/SP ✓ فعالPIC24FJ16MC102-E/SP جائزہ
A PIC24F microcontroller is a 16-bit RISC-based embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. The PIC24FJ16MC102 family is designed for low-cost motor-control applications where a compact pin count and dedicated timing peripherals provide an efficient alternative to more complex control architectures. Its 28-pin SPDIP package also simplifies breadboarding, prototyping, and through-hole assembly.
Key features include 16 MIPS execution capability, 16 KB of Flash memory organized as 5.5K x 24, 1 KB of SRAM, and a maximum operating frequency of 32 MHz. Motor-control support includes MCPWM channels and CTMU, while the peripheral set also includes comparators, power-on reset, pulse-width modulation, real-time clock, watchdog timer, multiple timers, and a 10-bit ADC. Communication interfaces include I2C, SPI, IrDA, and LINbus.
The 16-bit architecture and peripheral selection allow the PIC24FJ16MC102 to combine general-purpose control with dedicated motor functions in a single device. Its dual-master SPI interface, UART capability, and LINbus connectivity support communications with sensors, position devices, host controllers, and automotive-style networks. PPS provides accurate timing relationships between peripherals, while CTMU supports capacitance measurement and other analog front-end tasks.
Typical applications include small brushless DC motor controllers, stepper-motor position control, fan and pump controllers, appliance drive systems, automotive accessory modules, and compact industrial automation equipment. The 28-pin SPDIP package is particularly suitable for prototypes and through-hole products that benefit from easy inspection, rework, and socket-compatible assembly.
Designers should preserve the voltage and decoupling requirements specified by the manufacturer datasheet, and should verify ICSP programming access before assigning PCB pins. Because motor-control timing and mixed-signal performance depend on layout, keep power-loop paths compact, provide stable VDD connections, and route sensitive analog inputs away from switching nodes.
This page combines the device architecture, interface capabilities, package information, practical application guidance, and drop-in replacement analysis. It is intended to help engineers evaluate the PIC24FJ16MC102-E/SP for cost-sensitive embedded control while checking memory, timing, connectivity, thermal grade, and pin compatibility requirements before release to production.
کے لیے ڈراپ اِن متبادل PIC24FJ16MC102-E/SP — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں PIC24FJ16MC102-E/SP (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Motor-Control PWM, Mounting Type, Package, Product Type, Supply Voltage.
PIC24FJ16MC102/SP
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
PIC24FJ16MC102-I/SP
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ16MC102-E/SP
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →PIC24FJ16MC102-E/SP زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | 16-bit PIC24F motor-control microcontroller (device category) |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 16 KB Flash (5.5K x 24) |
| Data Memory | 1 KB RAM |
| Architecture | 16-bit PIC RISC (processor architecture) |
| سپلائی وولٹیج | 3 V to 3.6 V |
| پیکیج | 28-pin SPDIP, 0.300 in body width and 7.62 mm row spacing |
| ماؤنٹنگ ٹائپ | Through-hole (mounting type) |
| Motor-Control PWM | MCPWM peripheral (motor-control function) |
| Analog Peripheral | CTMU peripheral (analog measurement function) |
| ADC Channels | 6 channels, 10-bit (converter channel) |
| Connectivity | I2C, SPI, IrDA, and LINbus (communication interfaces) |
| Timing Peripheral | PPS peripheral (precision timing function) |
| Debug Interface | ICSP with PGECx and PGEDx pairs (debug interface) |
| RoHS اسٹیٹس | Compliant (environmental compliance status) |
| Automotive Qualification | AEC-Q100 qualified (automotive qualification status) |
PIC24FJ16MC102-E/SP 28-pin spdip, 0.300 in body width and 7.62 mm row spacing پن کنفیگریشن گائیڈ
PIC24FJ16MC102-E/SP (28-pin spdip, 0.300 in body width and 7.62 mm row spacing پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں PIC24FJ16MC102-E/SP.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
PIC24FJ16MC102-E/SP کے لیے موزوں ہے 6 ایپلیکیشنs: Brushless DC Motor Controller, Stepper Motor Position Control, Compact Fan and Pump Drive, Automotive Accessory Module, Appliance Motor Control Board, Low-Voltage Industrial Sensor Node.
Brushless DC Motor Controller
The PIC24FJ16MC102-E/SP fits compact brushless DC motor controllers because its MCPWM peripherals provide dedicated motor-control timing while its 16 MIPS processing capacity supports commutation logic and supervisory functions. The 10-bit ADC can sample motor-current or position feedback, and CTMU adds capacitance-measurement capability for sensing and protection. With 16 KB of Flash and 1 KB of RAM, the device can hold control code, calibration values, and a small state machine without requiring a separate processor. Its 3 V to 3.6 V operating range also aligns with many low-voltage motor-drive architectures, although the final bridge, gate driver, current sensing, and protection circuitry must be selected independently.
تجویز کردہ
Stepper Motor Position Control
The PIC24FJ16MC102-E/SP is suitable for stepper-motor position controllers that require deterministic pulse generation, directional control, and limited position feedback. Its PWM resources can drive step and direction signals or support current shaping, while multiple timers can establish the required stepping cadence. The 32 MHz maximum operating frequency and 16 MIPS throughput leave processing capacity for acceleration profiles, homing routines, and communication handling. I2C or SPI can connect the controller to encoders, displays, or host systems, while LINbus can support networked appliance and industrial modules. Engineers should validate step-rate limits, motor-driver requirements, and thermal performance in the final mechanical and electrical system.
تجویز کردہ
Compact Fan and Pump Drive
The PIC24FJ16MC102-E/SP can control compact fans, circulation pumps, and small appliance motors where an economical 28-pin architecture is valuable. MCPWM can generate the motor-drive waveform, and the 10-bit ADC can monitor a speed or current feedback signal for closed-loop operation. The device operates from 3 V to 3.6 V and includes CTMU, comparators, timers, and watchdog support, providing useful resources for stall detection, startup sequencing, and fault handling. Its 16 KB of Flash accommodates a complete control application, while 1 KB of RAM is sufficient for modest state management. A production design must add the appropriate transistor or gate-driver stage and verify stall, startup, and overvoltage behavior.
تجویز کردہ
Automotive Accessory Module
The PIC24FJ16MC102-E/SP can serve as the controller in a small automotive accessory module that needs local motor or solenoid control without a large application processor. Its AEC-Q100 qualification, 32 MHz maximum clock, and dedicated MCPWM and ADC resources support timing-sensitive control tasks. LINbus connectivity is particularly relevant for vehicle networks, while I2C and SPI allow expansion to sensors and nonvolatile storage. The 16 KB Flash and 1 KB RAM are adequate for focused accessory-control firmware rather than a full infotainment workload. Because automotive production also requires environmental, electromagnetic, functional-safety, and supply-chain assessment, the MCU qualification should form only one part of the complete vehicle-quality design review.
تجویز کردہ
Appliance Motor Control Board
The PIC24FJ16MC102-E/SP fits appliance control boards that coordinate a motor, user interface, and simple sensor network on a single PCB. Its 16-bit architecture and 16 MIPS throughput support real-time motor sequencing and fault logic, while I2C, SPI, IrDA, and LINbus provide several ways to connect displays, sensors, and external controllers. The 28-pin SPDIP package is straightforward for prototypes and through-hole production, while CTMU, comparators, timers, watchdog, and PPS support robust control and timing. A 16 KB Flash budget can hold application firmware, and 1 KB of RAM supports basic state variables. Engineers should partition motor-power traces from sensitive signals and retain the programming interface for firmware updates.
تجویز کردہ
Low-Voltage Industrial Sensor Node
The PIC24FJ16MC102-E/SP can act as the local controller in a low-voltage industrial sensor node that monitors analog or digital inputs and drives a small actuator. The 10-bit ADC, CTMU, comparators, and multiple timers support measurement and threshold functions, while I2C and SPI accommodate sensors and external nonvolatile memory. At up to 32 MHz and 16 MIPS, the controller can combine sampling, filtering, diagnostics, and communications without a high-power processor. Its 3 V to 3.6 V supply range simplifies integration with regulated industrial rails, although isolation, surge protection, and wide-temperature requirements may need external components. Use the watchdog and communications timeout mechanisms to recover safely from sensor or network faults.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا PIC24FJ16MC102-E/SP — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | PIC24FJ16MC102/SP | PIC24FJ16MC102-I/SP | PIC24FJ16MC102-E/SP |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP | 28-pin SPDIP |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Program Memory | 16 KB Flash (5.5K x 24) | 16 KB Flash | 16 KB Flash | 16 KB Flash |
| Data Memory | 1 KB RAM | 1 KB RAM | 1 KB RAM | 1 KB RAM |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Connectivity | I2C, SPI, IrDA, and LINbus | I2C, SPI, IrDA, and LINbus | I2C, SPI, IrDA, and LINbus | I2C, SPI, IrDA, and LINbus |
| Motor-Control Peripheral | MCPWM and CTMU | MCPWM and CTMU | MCPWM and CTMU | MCPWM and CTMU |
| ADC | 6-channel 10-bit ADC | 6-channel 10-bit ADC | 6-channel 10-bit ADC | 6-channel 10-bit ADC |
اہم امتیازی خصوصیات
- Exact same-family pin-compatible configuration (بمقابلہPIC24FJ16MC102-I/SP)
- Dedicated motor-control integration in a 28-pin package (بمقابلہPIC24FJ16MC102/SP)
- Connectivity suitable for embedded motor systems (بمقابلہPIC24FJ16MC102-E/SP)
ڈیزائن نوٹس
Reserve an ICSP programming header that exposes VDD, VSS, MCLR, PGECx, and PGEDx. Any PGECx and PGEDx pair must be treated as a matched programming and debug path. Place the connector where the programming cable can reach without crossing motor-power or high-voltage isolation barriers. Confirm the selected adapter's voltage and pin compatibility before the PCB layout is released.
Separate motor-drive current paths from MCU power and analog-sensing routes. Keep the VDD and decoupling network compact, provide a low-impedance return path, and route motor-node signals away from the ADC and CTMU inputs. Ground partitioning should follow the complete power circuit rather than creating separate isolated ground regions. PCB review should verify that switching-node copper does not extend beneath sensitive control or communication traces.
Do not treat equal package dimensions as sufficient proof of drop-in compatibility. Verify the exact suffix temperature grade, alternate-function mappings, peripheral availability, programming configuration, and clock requirements for the production build. The PIC24FJ16MC102/SP, PIC24FJ16MC102-I/SP, and PIC24FJ16MC102-E/SP share the core 28-pin SPDIP format, but qualification and environmental requirements can still differ between ordering codes.
The MCU's stated 3 V to 3.6 V operating range does not define the complete motor-supply requirement. Decouple each VDD connection according to the manufacturer datasheet, use a local low-noise source for the microcontroller, and avoid routing motor-current returns through the logic ground path. Where the bridge and MCU share a supply, verify startup, transient, and brownout behavior across motor operating states.
تعمیل کی معلومات
RoHS compliance and AEC-Q100 qualification are identified for the exact PIC24FJ16MC102-E/SP ordering code. REACH, lead-free, halogen-free, and conflict-minerals status were not stated and remain unknown.