Microchip Technology

PIC24FJ32GU205-I/M4 - 32MHz USB MCU, 32KB Flash | Microchip

Teilenummer: PIC24FJ32GU205-I/M4 ✓ Aktiv
2 V to 3.6 V Vdss A few hundred nA Id 48-UQFN (6 x 6 mm) Package 32 MHz Speed 32 KB Flash (11K x 24 words) Memory
MOQ: 1 |

PIC24FJ32GU205-I/M4 Übersicht

The Microchip Technology PIC24FJ32GU205-I/M4 is a 16-bit PIC24FJ microcontroller with a 32 MHz operating frequency, 32 KB of Flash program memory, 8 KB of RAM, and Full Speed USB 2.0 connectivity in a 48-pin UQFN package measuring 6 x 6 mm. It combines 38 I/O pins with an eXtreme Low-Power design optimized for compact embedded systems.

A PIC24FJ microcontroller is a low-power embedded controller within the broader MCU and semiconductor hierarchy. Its 16-bit architecture, core-independent peripherals, integrated memory, USB connectivity, and low-power modes make it suitable for connected products that need more processing capability than an 8-bit MCU without adopting a more complex high-end processor. The GU2 family also provides peripheral features that can offload common timing, communications, and control tasks from the main CPU.

The device provides 32 KB of ECC Flash, equivalent to 11K x 24 program words in the distributor description, together with 8 KB of data RAM. Its 32 MHz maximum operating frequency supports 16 MIPS operation, as identified for this device family. Full Speed USB 2.0 Host, Device, and OTG support permits use with USB peripherals, storage, human-interface devices, and portable data-collection equipment.

Power efficiency is central to the PIC24FJ GU2 architecture. The manufacturer describes sleep current reaching a few hundred nanoamperes while retaining core-independent peripheral operation. This combination of 2 V to 3.6 V operation, low-power sleep behavior, and independent peripherals supports battery-operated and energy-conscious designs where the main CPU does not need to remain fully active during idle periods.

Typical applications include USB-connected industrial instrumentation, compact medical accessories, wearable or portable data loggers, USB power-control systems, and embedded USB bridges. The 38 available I/O pins are useful for sensors, indicators, controls, and communication peripherals, while the 6 x 6 mm UQFN package supports space-constrained board layouts.

Designers should treat USB routing, exposed-pad soldering, decoupling, and firmware configuration as the primary implementation considerations. Place the USB D+ and D- traces as a controlled-impedance differential pair, use the shortest practical connection to the USB connector, and follow the exposed-pad land pattern and thermal-via recommendations in the manufacturer datasheet. The industrial temperature suffix should also be checked against the complete operating-temperature requirements of the assembled product.

This page combines the exact MPN characteristics, manufacturer family capabilities, package details, practical design guidance, and verified same-footprint alternatives into an engineering-focused purchasing reference.

Drop-in-Alternativen für PIC24FJ32GU205-I/M4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit PIC24FJ32GU205-I/M4 (gleiche Bauform und Footprint) – abweichend in Package, Core Architecture, Mounting Type, Core Independent Peripherals (CIPs), Family.

Microchip Technology
Package: 48-pin UQFN (6x6 mm)
Core Architecture: PIC24F 16-bit Modified Harvard
Core Independent Peripherals (CIPs): Configurable Logic Cells, 24-bit Signal Routing, CLC, MCCP, SCCP
Microchip Technology
Package: 48-pin UQFN (6x6 mm)
Core Architecture: PIC24F (16-bit RISC modified Harvard)
Mounting Type: Surface Mount, exposed thermal pad
Microchip Technology
Package: 48-pin UQFN (6 x 6 mm)
Core Independent Peripherals (CIPs): Yes (CLC, MCCP, configurable logic)
Family: PIC24F (PIC24FJ GP2/GU2 series)

PIC24FJ32GU205T-I/M4

✅ Drop-In
Microchip Technology
📦 48-UQFN (6 x 6 mm)
PIC24F (PIC24FJ GP2/GU2 series) · PIC24F 16-bit modified Harvard · 16-bit RISC · 32 MHz (16 MIPS) · 32 KB (11K x 24) with ECC · 8 KB · USB 2.0 Full-Speed Host/Device/OTG · 48-pin UQFN (6 x 6 mm)

Preis auf Anfrage

Datenblatt ansehen →

PIC24FJ32GU205T-E/M4

✅ Drop-In
📦 48-UQFN (6 x 6 mm)
Same 32 MHz PIC24FJ core, 32 KB Flash, and 8 KB RAM; E temperature designation replaces the I industrial-temperature designation.

📋 Referenzalternative (nicht im Katalog)

PIC24FJ32GP205-I/M4

✅ Drop-In
Microchip Technology
📦 48-UQFN (6 x 6 mm)
PIC24F 16-bit Modified Harvard · 32 KB (11K x 24) with ECC · 8 KB · 32 MHz (16 MIPS) · USB 2.0 Full-Speed Host/Device/OTG

Preis auf Anfrage

Datenblatt ansehen →

PIC24FJ32GU204-I/M4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-UQFN (6 x 6 mm)
Same PIC24FJ GU2 32 MHz family and 48-UQFN footprint; program-memory capacity differs by one 2 KB increment versus GU205.

📋 Referenzalternative (nicht im Katalog)

PIC24FJ32GU203-I/M4

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 48-UQFN (6 x 6 mm)
Same PIC24FJ GU2 32 MHz family and 48-UQFN footprint; program-memory capacity differs by one 2 KB increment versus GU205.

📋 Referenzalternative (nicht im Katalog)

PIC24FJ32GU205-I/M4 Grenzwerte & elektrische Eigenschaften

Microcontroller Type 16-bit PIC24FJ MCU
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Program Memory 32 KB Flash (11K x 24 words)
Program Memory Type ECC Flash
Data Memory 8 KB RAM
USB Interface Full Speed USB 2.0 Host/Device/OTG
I/O Pin Count 38 pins
Supply Voltage Range 2 V to 3.6 V
Gehäuse 48-UQFN (6 x 6 mm)
Montageart Surface mount
Power Technology eXtreme Low-Power (XLP)
Sleep Current A few hundred nA
Core Architecture PIC24 16-bit RISC
Interrupt Sources 54 sources
Trap Count 6 traps
Temperature Grade Industrial grade (-40°C to +85°C)

PIC24FJ32GU205-I/M4 48-uqfn (6 x 6 mm) Pinbelegungsleitfaden

Pinbelegung für PIC24FJ32GU205-I/M4 (48-uqfn (6 x 6 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für PIC24FJ32GU205-I/M4 im 48-uqfn (6 x 6 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für PIC24FJ32GU205-I/M4.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

PIC24FJ32GU205-I/M4 ist geeignet für 6 Anwendungs: USB Industrial Instrumentation, Portable Medical Accessories, USB Data Loggers, Wearable Sensor Controllers, USB Power and Charging Controls, USB-to-Serial Protocol Bridges.

🏭

USB Industrial Instrumentation

The PIC24FJ32GU205-I/M4 fits compact USB-connected instruments that must combine control processing with data transfer. Its 16-bit CPU operates up to 32 MHz, providing 16 MIPS while 38 I/O pins support sensors, status indicators, and operator controls. Full Speed USB 2.0 Host, Device, and OTG operation enables direct connectivity to computers, service tools, or removable storage without an external USB controller. The 32 KB ECC Flash and 8 KB RAM provide room for calibration data, local logging, and control firmware. For industrial equipment, protect analog inputs from transients, isolate exposed interfaces, and observe the full temperature requirements of the installation.

💊

Portable Medical Accessories

The PIC24FJ32GU205-I/M4 is appropriate for compact medical accessories that need USB connectivity, moderate control processing, and low standby demand. At 32 MHz and 16 MIPS, the controller can supervise sensor acquisition, user-interface states, and data packaging while Full Speed USB provides a wired interface to a host or charger. The GU2 family can retain core-independent peripheral activity during sleep, and family sleep current can fall to a few hundred nanoamperes, supporting battery-conscious operation. The 48-UQFN package reduces board area, while 38 I/O pins leave room for sensors and indicators. Medical designs still require appropriate electrical isolation, safety validation, and applicable regulatory controls.

🧩

USB Data Loggers

The PIC24FJ32GU205-I/M4 works well in portable data loggers that periodically record sensor information and transfer it over USB. Its 16-bit architecture and 32 MHz maximum frequency provide more computational headroom than an 8-bit controller for sampling control, timestamps, buffering, and file formatting. The 32 KB ECC Flash supports firmware and parameter storage, while 8 KB RAM accommodates active acquisition and transfer buffers. Full Speed USB Device operation enables a direct connection to a computer, and the family’s low-power sleep behavior can reduce consumption between measurement intervals. When defining the product, size RAM and Flash for protocol overhead, use wear-aware storage practices, and include ESD protection on externally accessible connectors.

📱

Wearable Sensor Controllers

The PIC24FJ32GU205-I/M4 suits wearable and body-adjacent sensor controllers where a compact package, 38 I/O pins, and USB connectivity must coexist with limited power budgets. The 32 MHz PIC24 CPU can handle sensor fusion, filtering, and control tasks, while the GU2 low-power architecture supports sleep operation with core-independent peripherals retained. A 6 x 6 mm 48-UQFN package helps minimize board area in compact products. The 2 V to 3.6 V supply range is compatible with many 3.3 V wearable power systems, although battery regulation and charger design remain system-level responsibilities. Confirm skin-contact safety requirements, protection against ESD and moisture, and the complete device temperature specification before production release.

⚡

USB Power and Charging Controls

The PIC24FJ32GU205-I/M4 can coordinate USB-connected power accessories, peripheral control, and status reporting in compact equipment. Its Full Speed USB Device and OTG support allows firmware to enumerate as a USB device and exchange control information with a host. The 16-bit CPU at 32 MHz provides enough throughput for supervisory logic, while 38 I/O pins can support relay control, button input, status LEDs, and inter-device signaling. The low-power sleep capability is valuable when the accessory remains connected but is mostly inactive. Keep high-current switching stages outside the MCU, separate noisy power paths from sensitive signal routing, and use the manufacturer electrical limits when designing protection around the USB pins.

🔧

USB-to-Serial Protocol Bridges

The PIC24FJ32GU205-I/M4 provides a compact controller platform for USB-to-serial bridges used in instrumentation, service equipment, and configuration tools. Full Speed USB Device operation supports host enumeration and data transfer, while the 32 MHz 16-bit CPU can manage protocol framing, buffering, and status reporting. Its 38 I/O pins offer multiple serial, interrupt, and control lines, and the 32 KB ECC Flash plus 8 KB RAM is adequate for protocol state and moderate buffering. The 48-UQFN package supports compact bridge products but requires careful exposed-pad soldering and controlled USB trace impedance. Firmware should include enumeration handling, timeout recovery, and robust protection against malformed host commands.

Zusammenfassung der empfohlenen Produkte

PIC24FJ32GU205T-I/M4 Microchip Technology Verwendet in: USB Industrial Instrumentation, USB Data Loggers, USB Power and Charging Controls PIC24FJ32GU205T-E/M4 Same PIC24FJ GU2 architecture with a different temperature designation Verwendet in: USB Industrial Instrumentation, USB Power and Charging Controls PIC24FJ32GU204-I/M4 Nearby PIC24FJ GU2 device for firmware and hardware evaluation Verwendet in: Portable Medical Accessories, Wearable Sensor Controllers, USB-to-Serial Protocol Bridges PIC24FJ32GU203-I/M4 Nearby PIC24FJ GU2 family option Verwendet in: Portable Medical Accessories, Wearable Sensor Controllers, USB-to-Serial Protocol Bridges PIC24FJ32GP205-I/M4 Microchip Technology Verwendet in: USB Data Loggers
What are the key specifications of PIC24FJ32GU205-I/M4?
The PIC24FJ32GU205-I/M4 is a 16-bit PIC24FJ MCU operating at up to 32 MHz with 32 KB of ECC Flash, 8 KB of RAM, Full Speed USB 2.0, and 38 I/O pins in a 48-UQFN package. The manufacturer product page identifies the GU2 family’s USB Host, Device, and OTG capabilities, while the exact-MPN distributor listing identifies the 32 MHz frequency, 32 KB Flash, and 6 x 6 mm package.
What is the operating voltage of PIC24FJ32GU205-I/M4?
The PIC24FJ32GU205-I/M4 operates from 2 V to 3.6 V according to the exact-MPC datasheet description for this ordered device. This range supports 3.3 V systems while retaining operation from 2 V supplies. Designers should verify individual external peripheral voltage limits and use level translation when a connected device uses a different logic voltage.
Where can I download the PIC24FJ32GU205-I/M4 datasheet PDF?
Download the PIC24FJ32GU205-I/M4 documentation through the official Microchip product page or the exact-MPN PDF listed for this device. The manufacturer product page is the preferred source for current documentation and ordering information. The 48-pin UQFN pin assignment, USB routing guidance, electrical limits, and programming details should be taken from the manufacturer datasheet rather than a distributor summary.
Where can I find the PIC24FJ32GU205-I/M4 pinout?
The PIC24FJ32GU205-I/M4 pinout is documented in the manufacturer datasheet under the 48-pin UQFN package information. Use the pin-description and package-outline tables to map VDD, VSS, USB, programming, and I/O connections. The device uses a 6 x 6 mm UQFN footprint, so verify the exposed-pad dimensions and thermal-via pattern before fabrication.
Does PIC24FJ32GU205-I/M4 support USB Host, Device, and OTG?
Yes, the PIC24FJ32GU205-I/M4 supports Full Speed USB 2.0 Host, Device, and OTG functions. The Microchip PIC24FJ GU2 family description explicitly identifies all three operating roles. Actual USB behavior still depends on the selected device configuration, firmware, clock setup, transceiver implementation, and the required USB electrical compliance.
How much Flash memory and RAM does PIC24FJ32GU205-I/M4 have?
The PIC24FJ32GU205-I/M4 contains 32 KB of ECC Flash program memory and 8 KB of data RAM. The exact-MPN distributor description expresses the Flash capacity as 11K x 24 words. For firmware planning, distinguish program-memory capacity from RAM capacity and reserve memory for configuration settings, bootloader functions, and application data.
Is PIC24FJ32GU205-I/M4 suitable for low-power battery applications?
The PIC24FJ32GU205-I/M4 is suitable for low-power embedded designs because the GU2 family supports sleep current down to a few hundred nanoamperes while retaining core-independent peripherals. Its 2 V to 3.6 V operating range also fits many 3.3 V battery-powered products. The final battery life depends on duty cycle, enabled peripherals, USB activity, and board leakage.
What is the best drop-in replacement for PIC24FJ32GU205-I/M4?
PIC24FJ32GU205T-I/M4 is the closest same-footprint ordering alternative for PIC24FJ32GU205-I/M4 because it retains the same 48-UQFN device, 32 MHz rating, 32 KB Flash, and USB-equipped PIC24FJ GU2 configuration. Its distinguishing code is the reel or tape packaging form. Confirm the manufacturer ordering-information table and the PCB orientation before approving it as a drop-in replacement.
Can PIC24FJ32GP205-I/M4 replace PIC24FJ32GU205-I/M4?
PIC24FJ32GP205-I/M4 should not be treated as an unconditional replacement for PIC24FJ32GU205-I/M4 because the GP and GU family USB feature sets differ. Both are 16-bit, 32 MHz-class PIC24FJ devices in the 48-pin UQFN package with 32 KB ECC Flash and 8 KB RAM, but GU205 specifically provides the GU2 family USB Host, Device, and OTG functions.
PIC24FJ32GU205-I/M4 vs PIC24FJ32GU205T-E/M4 - which is better?
PIC24FJ32GU205-I/M4 is the industrial-temperature ordering option, while PIC24FJ32GU205T-E/M4 uses the extended-temperature code shown in its ordering designation. Both occupy the same 48-UQFN footprint and retain the 32 MHz, 32 KB ECC Flash, and 8 KB RAM configuration. Choose the part whose complete temperature range matches the ambient and enclosure conditions.
When should I choose PIC24FJ32GU205-I/M4 over PIC24FJ32GP205-I/M4?
Choose PIC24FJ32GU205-I/M4 when the design requires the GU2 family’s Full Speed USB 2.0 Host, Device, or OTG capability. The exact-MPN description identifies the GU205 as a USB-equipped 16-bit MCU with 32 MHz operation, 32 KB Flash, and 8 KB RAM. Choose the GP205 only after confirming that its particular peripheral and USB requirements meet the product specification.
Is PIC24FJ32GU205-I/M4 suitable for industrial instrumentation?
Yes, the PIC24FJ32GU205-I/M4 fits compact industrial instrumentation that needs USB connectivity, 38 I/O pins, and an industrial-temperature ordering designation. Its 16 MIPS processing capability at 32 MHz supports responsive control, while 32 KB of ECC Flash and 8 KB of RAM provide local program and data space. Add suitable signal conditioning and isolation for field-facing interfaces.
What tools are used to program PIC24FJ32GU205-I/M4?
The PIC24FJ32GU205-I/M4 is programmed through the programming and debug interface defined for the PIC24FJ family by Microchip. Tool selection depends on the board connector, programming voltage requirements, and development workflow. Use the current Microchip programmer, debugger, and MPLAB-compatible device support information to confirm programming, verification, and in-circuit debugging operations.
Where to buy PIC24FJ32GU205-I/M4 online?
Use the Request a Quote form on this page to request PIC24FJ32GU205-I/M4 availability, current lead time, and order quantity. The form connects the request with XAIPART without relying on a static commercial listing. Confirm the exact suffix, 48-UQFN package, and delivery form when placing the order so the shipment matches the approved BOM.
What is the price and lead time for PIC24FJ32GU205-I/M4?
The Request a Quote form on this page provides the current commercial response for PIC24FJ32GU205-I/M4, including quantity, lead-time, and packaging requirements. Because MCU availability can vary with the exact ordering suffix and demand, specify the full MPN, annual usage, and delivery schedule in the request. This avoids relying on an outdated catalog quantity break.
Is PIC24FJ32GU205-I/M4 in stock?
Stock status for PIC24FJ32GU205-I/M4 should be confirmed through the Request a Quote form on this page using the complete MPN and required quantity. The exact-MPN listing advertises availability, but inventory changes continuously and does not establish a guaranteed allocation. Include your required delivery date and accepted package form with the request.

Technische Referenzdaten für PIC24FJ32GU205-I/M4 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose PIC24FJ32GU205-I/M4 for compact USB-enabled products that need a 16-bit CPU, 32 MHz operation, 32 KB of ECC Flash, 8 KB of RAM, 38 I/O pins, and an industrial-temperature ordering designation. PIC24FJ32GU205T-I/M4 is the closest listed alternative when the required delivery form differs, while PIC24FJ32GU205T-E/M4 may be preferable only when its extended-temperature range is appropriate. PIC24FJ32GP205-I/M4 is a close family option when the GU2 USB Host/Device/OTG functions are unnecessary, but USB requirements must be reviewed before substitution. PIC24FJ32GU204-I/M4 and PIC24FJ32GU203-I/M4 are appropriate when their lower Flash capacities meet the firmware budget and the same 48-UQFN footprint is acceptable. In every case, verify the pin table, USB connectivity, temperature range, package drawing, programming configuration, and firmware requirements before approval.

Vergleich mit Alternativen

Parameter Dieses Produkt PIC24FJ32GU205T-I/M4 PIC24FJ32GU205T-E/M4 PIC24FJ32GP205-I/M4 PIC24FJ32GU204-I/M4
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-UQFN (6 x 6 mm) 48-UQFN (6 x 6 mm) 48-UQFN (6 x 6 mm) 48-pin 48-UQFN (6 x 6 mm)
CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz class 32 MHz
Instruction Throughput 16 MIPS 16 MIPS 16 MIPS 16 MIPS 16 MIPS
Program Memory 32 KB ECC Flash 32 KB Flash 32 KB Flash 32 KB ECC Flash 30 KB Flash
USB Support Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG Full Speed USB 2.0 Host/Device/OTG No GU205 USB feature set Full Speed USB 2.0 Host/Device/OTG
Temperature Designation I / Industrial I / Industrial E / Extended temperature I / Industrial I / Industrial

Wichtigste Unterscheidungsmerkmale

  • Combines GU2 USB capability with a 32 MHz 16-bit CPU (vs. PIC24FJ32GP205-I/M4)
  • Direct industrial-temperature ordering option (vs. PIC24FJ32GU205T-E/M4)
  • Matches the closest listed GU205 ordering configuration (vs. PIC24FJ32GU205T-I/M4)
  • Four kilobytes more Flash than the adjacent GU204 option (vs. PIC24FJ32GU204-I/M4)

Designhinweise

Route USB D+ and D- as a short, continuous differential pair with the impedance required by the connector and cable. Keep the pair away from switching-regulator inductors, crystal-clock traces, and high-current switching nodes. Place the input and decoupling capacitors directly beside the corresponding power pins, and follow the manufacturer’s exposed-pad and thermal-via layout to avoid soldering voids beneath the UQFN device.

Estimated: the UQFN exposed pad provides the principal thermal path, so thermal performance depends strongly on the PCB copper area and via count specified by the manufacturer package drawing. Treat the tab and exposed pad as one electrical and thermal land pattern, use a suitable reflow profile, and inspect the underside for voids after assembly. Do not add an unreviewed heatsink or copper modification that may interfere with adjacent return paths.

Use the 2 V to 3.6 V operating range as the device-level constraint, but design the complete board around the minimum voltage required by the USB transceiver, regulator, sensors, and external load. Provide local high-frequency bypassing at every supply pin and verify startup and brownout behavior across the full voltage range. Low-power claims should be validated with the intended peripheral configuration because USB activity and active peripherals change the measured current.

Do not substitute PIC24FJ32GP205 for the GU205 without reviewing USB requirements, and do not treat the T ordering code as a purely cosmetic change without checking reel orientation, labeling, and traceability. Verify programming pins, exposed-pad connection, supply pins, and USB pin assignments in the manufacturer pin table for every revision of the PCB before releasing production firmware.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The industrial-temperature suffix does not by itself establish automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.

Ähnliche Suchanfragen

PIC24FJ32GU205-I/M4 PIC24FJ32GU205-I/M4 datasheet PIC24FJ32GU205-I/M4 datasheet pdf PIC24FJ32GU205-I/M4 pinout PIC24FJ32GU205-I/M4 equivalent PIC24FJ32GU205-I/M4 replacement PIC24FJ32GU205-I/M4 cross reference PIC24FJ32GU205-I/M4 price PIC24FJ32GU205-I/M4 stock Microchip PIC24FJ32GU205-I/M4 PIC24FJ32GU205 48-UQFN pinout PIC24FJ32GU205 USB application circuit PIC24FJ32GU205-I/M4 vs PIC24FJ32GP205-I/M4 PIC24FJ32GU205 32MHz 32KB USB MCU

Verwandte Bauteile & Begriffe

Microchip Technology PIC24FJ32GU205-I/M4 PIC24FJ32GU205T-I/M4 PIC24FJ32GU205T-E/M4 PIC24FJ32GP205-I/M4 PIC24FJ32GU204-I/M4 PIC24FJ32GU203-I/M4 PIC24FJ PIC24 GU2 family microcontroller MCU 16-bit RISC semiconductor embedded controller Full Speed USB 2.0 USB Host USB Device USB OTG eXtreme Low-Power XLP ECC Flash 48-UQFN QFN family surface mount 32 MHz 16 MIPS 32 KB Flash 8 KB RAM 38 I/O core-independent peripherals
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen