PIC24FJ32GU205-I/M4 - 32MHz USB MCU, 32KB Flash | Microchip
MPN: PIC24FJ32GU205-I/M4 ✓ Hoạt độngPIC24FJ32GU205-I/M4 Tóm tắt
A PIC24FJ microcontroller is a low-power embedded controller within the broader MCU and semiconductor hierarchy. Its 16-bit architecture, core-independent peripherals, integrated memory, USB connectivity, and low-power modes make it suitable for connected products that need more processing capability than an 8-bit MCU without adopting a more complex high-end processor. The GU2 family also provides peripheral features that can offload common timing, communications, and control tasks from the main CPU.
The device provides 32 KB of ECC Flash, equivalent to 11K x 24 program words in the distributor description, together with 8 KB of data RAM. Its 32 MHz maximum operating frequency supports 16 MIPS operation, as identified for this device family. Full Speed USB 2.0 Host, Device, and OTG support permits use with USB peripherals, storage, human-interface devices, and portable data-collection equipment.
Power efficiency is central to the PIC24FJ GU2 architecture. The manufacturer describes sleep current reaching a few hundred nanoamperes while retaining core-independent peripheral operation. This combination of 2 V to 3.6 V operation, low-power sleep behavior, and independent peripherals supports battery-operated and energy-conscious designs where the main CPU does not need to remain fully active during idle periods.
Typical applications include USB-connected industrial instrumentation, compact medical accessories, wearable or portable data loggers, USB power-control systems, and embedded USB bridges. The 38 available I/O pins are useful for sensors, indicators, controls, and communication peripherals, while the 6 x 6 mm UQFN package supports space-constrained board layouts.
Designers should treat USB routing, exposed-pad soldering, decoupling, and firmware configuration as the primary implementation considerations. Place the USB D+ and D- traces as a controlled-impedance differential pair, use the shortest practical connection to the USB connector, and follow the exposed-pad land pattern and thermal-via recommendations in the manufacturer datasheet. The industrial temperature suffix should also be checked against the complete operating-temperature requirements of the assembled product.
This page combines the exact MPN characteristics, manufacturer family capabilities, package details, practical design guidance, and verified same-footprint alternatives into an engineering-focused purchasing reference.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ32GU205-I/M4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ32GU205-I/M4 (cùng hình factor và footprint) — khác nhau ở Package, Core Architecture, Mounting Type, Core Independent Peripherals (CIPs), Family.
PIC24FJ32GU205T-I/M4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ32GU205T-E/M4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ32GP205-I/M4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ32GU204-I/M4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ32GU203-I/M4
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
PIC24FJ32GU205-I/M4 Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 16-bit PIC24FJ MCU |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 32 KB Flash (11K x 24 words) |
| Program Memory Type | ECC Flash |
| Data Memory | 8 KB RAM |
| USB Interface | Full Speed USB 2.0 Host/Device/OTG |
| I/O Pin Count | 38 pins |
| Supply Voltage Range | 2 V to 3.6 V |
| Hộp | 48-UQFN (6 x 6 mm) |
| Kiểu lắp đặt | Surface mount |
| Power Technology | eXtreme Low-Power (XLP) |
| Sleep Current | A few hundred nA |
| Core Architecture | PIC24 16-bit RISC |
| Interrupt Sources | 54 sources |
| Trap Count | 6 traps |
| Temperature Grade | Industrial grade (-40°C to +85°C) |
Hướng dẫn cấu hình chân PIC24FJ32GU205-I/M4 48-uqfn (6 x 6 mm)
Cấu hình chân cho PIC24FJ32GU205-I/M4 (48-uqfn (6 x 6 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24FJ32GU205-I/M4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24FJ32GU205-I/M4 phù hợp cho 6 Áp dụngs: USB Industrial Instrumentation, Portable Medical Accessories, USB Data Loggers, Wearable Sensor Controllers, USB Power and Charging Controls, USB-to-Serial Protocol Bridges.
USB Industrial Instrumentation
The PIC24FJ32GU205-I/M4 fits compact USB-connected instruments that must combine control processing with data transfer. Its 16-bit CPU operates up to 32 MHz, providing 16 MIPS while 38 I/O pins support sensors, status indicators, and operator controls. Full Speed USB 2.0 Host, Device, and OTG operation enables direct connectivity to computers, service tools, or removable storage without an external USB controller. The 32 KB ECC Flash and 8 KB RAM provide room for calibration data, local logging, and control firmware. For industrial equipment, protect analog inputs from transients, isolate exposed interfaces, and observe the full temperature requirements of the installation.
Được đề xuất
Portable Medical Accessories
The PIC24FJ32GU205-I/M4 is appropriate for compact medical accessories that need USB connectivity, moderate control processing, and low standby demand. At 32 MHz and 16 MIPS, the controller can supervise sensor acquisition, user-interface states, and data packaging while Full Speed USB provides a wired interface to a host or charger. The GU2 family can retain core-independent peripheral activity during sleep, and family sleep current can fall to a few hundred nanoamperes, supporting battery-conscious operation. The 48-UQFN package reduces board area, while 38 I/O pins leave room for sensors and indicators. Medical designs still require appropriate electrical isolation, safety validation, and applicable regulatory controls.
Được đề xuất
USB Data Loggers
The PIC24FJ32GU205-I/M4 works well in portable data loggers that periodically record sensor information and transfer it over USB. Its 16-bit architecture and 32 MHz maximum frequency provide more computational headroom than an 8-bit controller for sampling control, timestamps, buffering, and file formatting. The 32 KB ECC Flash supports firmware and parameter storage, while 8 KB RAM accommodates active acquisition and transfer buffers. Full Speed USB Device operation enables a direct connection to a computer, and the family’s low-power sleep behavior can reduce consumption between measurement intervals. When defining the product, size RAM and Flash for protocol overhead, use wear-aware storage practices, and include ESD protection on externally accessible connectors.
Được đề xuất
Wearable Sensor Controllers
The PIC24FJ32GU205-I/M4 suits wearable and body-adjacent sensor controllers where a compact package, 38 I/O pins, and USB connectivity must coexist with limited power budgets. The 32 MHz PIC24 CPU can handle sensor fusion, filtering, and control tasks, while the GU2 low-power architecture supports sleep operation with core-independent peripherals retained. A 6 x 6 mm 48-UQFN package helps minimize board area in compact products. The 2 V to 3.6 V supply range is compatible with many 3.3 V wearable power systems, although battery regulation and charger design remain system-level responsibilities. Confirm skin-contact safety requirements, protection against ESD and moisture, and the complete device temperature specification before production release.
Được đề xuất
USB Power and Charging Controls
The PIC24FJ32GU205-I/M4 can coordinate USB-connected power accessories, peripheral control, and status reporting in compact equipment. Its Full Speed USB Device and OTG support allows firmware to enumerate as a USB device and exchange control information with a host. The 16-bit CPU at 32 MHz provides enough throughput for supervisory logic, while 38 I/O pins can support relay control, button input, status LEDs, and inter-device signaling. The low-power sleep capability is valuable when the accessory remains connected but is mostly inactive. Keep high-current switching stages outside the MCU, separate noisy power paths from sensitive signal routing, and use the manufacturer electrical limits when designing protection around the USB pins.
Được đề xuất
USB-to-Serial Protocol Bridges
The PIC24FJ32GU205-I/M4 provides a compact controller platform for USB-to-serial bridges used in instrumentation, service equipment, and configuration tools. Full Speed USB Device operation supports host enumeration and data transfer, while the 32 MHz 16-bit CPU can manage protocol framing, buffering, and status reporting. Its 38 I/O pins offer multiple serial, interrupt, and control lines, and the 32 KB ECC Flash plus 8 KB RAM is adequate for protocol state and moderate buffering. The 48-UQFN package supports compact bridge products but requires careful exposed-pad soldering and controlled USB trace impedance. Firmware should include enumeration handling, timeout recovery, and robust protection against malformed host commands.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ32GU205-I/M4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ32GU205T-I/M4 | PIC24FJ32GU205T-E/M4 | PIC24FJ32GP205-I/M4 | PIC24FJ32GU204-I/M4 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-pin | 48-UQFN (6 x 6 mm) |
| CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz class | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Program Memory | 32 KB ECC Flash | 32 KB Flash | 32 KB Flash | 32 KB ECC Flash | 30 KB Flash |
| USB Support | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | No GU205 USB feature set | Full Speed USB 2.0 Host/Device/OTG |
| Temperature Designation | I / Industrial | I / Industrial | E / Extended temperature | I / Industrial | I / Industrial |
Bảo phân biệt quan trọng
- Combines GU2 USB capability with a 32 MHz 16-bit CPU (vsPIC24FJ32GP205-I/M4)
- Direct industrial-temperature ordering option (vsPIC24FJ32GU205T-E/M4)
- Matches the closest listed GU205 ordering configuration (vsPIC24FJ32GU205T-I/M4)
- Four kilobytes more Flash than the adjacent GU204 option (vsPIC24FJ32GU204-I/M4)
Ghi chú thiết kế
Route USB D+ and D- as a short, continuous differential pair with the impedance required by the connector and cable. Keep the pair away from switching-regulator inductors, crystal-clock traces, and high-current switching nodes. Place the input and decoupling capacitors directly beside the corresponding power pins, and follow the manufacturer’s exposed-pad and thermal-via layout to avoid soldering voids beneath the UQFN device.
Estimated: the UQFN exposed pad provides the principal thermal path, so thermal performance depends strongly on the PCB copper area and via count specified by the manufacturer package drawing. Treat the tab and exposed pad as one electrical and thermal land pattern, use a suitable reflow profile, and inspect the underside for voids after assembly. Do not add an unreviewed heatsink or copper modification that may interfere with adjacent return paths.
Use the 2 V to 3.6 V operating range as the device-level constraint, but design the complete board around the minimum voltage required by the USB transceiver, regulator, sensors, and external load. Provide local high-frequency bypassing at every supply pin and verify startup and brownout behavior across the full voltage range. Low-power claims should be validated with the intended peripheral configuration because USB activity and active peripherals change the measured current.
Do not substitute PIC24FJ32GP205 for the GU205 without reviewing USB requirements, and do not treat the T ordering code as a purely cosmetic change without checking reel orientation, labeling, and traceability. Verify programming pins, exposed-pad connection, supply pins, and USB pin assignments in the manufacturer pin table for every revision of the PCB before releasing production firmware.
Thông tin tuân thủ
The industrial-temperature suffix does not by itself establish automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.