PIC24FJ32GU205-I/M4 - 32MHz USB MCU, 32KB Flash | Microchip
MPN: PIC24FJ32GU205-I/M4 ✓ 啟用中PIC24FJ32GU205-I/M4 概覽
A PIC24FJ microcontroller is a low-power embedded controller within the broader MCU and semiconductor hierarchy. Its 16-bit architecture, core-independent peripherals, integrated memory, USB connectivity, and low-power modes make it suitable for connected products that need more processing capability than an 8-bit MCU without adopting a more complex high-end processor. The GU2 family also provides peripheral features that can offload common timing, communications, and control tasks from the main CPU.
The device provides 32 KB of ECC Flash, equivalent to 11K x 24 program words in the distributor description, together with 8 KB of data RAM. Its 32 MHz maximum operating frequency supports 16 MIPS operation, as identified for this device family. Full Speed USB 2.0 Host, Device, and OTG support permits use with USB peripherals, storage, human-interface devices, and portable data-collection equipment.
Power efficiency is central to the PIC24FJ GU2 architecture. The manufacturer describes sleep current reaching a few hundred nanoamperes while retaining core-independent peripheral operation. This combination of 2 V to 3.6 V operation, low-power sleep behavior, and independent peripherals supports battery-operated and energy-conscious designs where the main CPU does not need to remain fully active during idle periods.
Typical applications include USB-connected industrial instrumentation, compact medical accessories, wearable or portable data loggers, USB power-control systems, and embedded USB bridges. The 38 available I/O pins are useful for sensors, indicators, controls, and communication peripherals, while the 6 x 6 mm UQFN package supports space-constrained board layouts.
Designers should treat USB routing, exposed-pad soldering, decoupling, and firmware configuration as the primary implementation considerations. Place the USB D+ and D- traces as a controlled-impedance differential pair, use the shortest practical connection to the USB connector, and follow the exposed-pad land pattern and thermal-via recommendations in the manufacturer datasheet. The industrial temperature suffix should also be checked against the complete operating-temperature requirements of the assembled product.
This page combines the exact MPN characteristics, manufacturer family capabilities, package details, practical design guidance, and verified same-footprint alternatives into an engineering-focused purchasing reference.
直接替換替代品,適用於 PIC24FJ32GU205-I/M4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: PIC24FJ32GU205-I/M4 (相同外形與佔位) — 差異在於 Package, Core Architecture, Mounting Type, Core Independent Peripherals (CIPs), Family.
PIC24FJ32GU205T-I/M4
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ32GU205T-E/M4
✅ 直接替換📋 參考替代品(不在目錄中)
PIC24FJ32GP205-I/M4
✅ 直接替換聯絡詢價
查看資料表 →PIC24FJ32GU204-I/M4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ32GU203-I/M4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PIC24FJ32GU205-I/M4 最大額定值與電氣特性
| Microcontroller Type | 16-bit PIC24FJ MCU |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Memory | 32 KB Flash (11K x 24 words) |
| Program Memory Type | ECC Flash |
| Data Memory | 8 KB RAM |
| USB Interface | Full Speed USB 2.0 Host/Device/OTG |
| I/O Pin Count | 38 pins |
| Supply Voltage Range | 2 V to 3.6 V |
| 封裝 | 48-UQFN (6 x 6 mm) |
| 安裝類型 | Surface mount |
| Power Technology | eXtreme Low-Power (XLP) |
| Sleep Current | A few hundred nA |
| Core Architecture | PIC24 16-bit RISC |
| Interrupt Sources | 54 sources |
| Trap Count | 6 traps |
| Temperature Grade | Industrial grade (-40°C to +85°C) |
PIC24FJ32GU205-I/M4 48-uqfn (6 x 6 mm) 腳位配置指南
PIC24FJ32GU205-I/M4(48-uqfn (6 x 6 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: PIC24FJ32GU205-I/M4.
請參閱 資料表 以查看完整腳位配置。
典型應用
PIC24FJ32GU205-I/M4 適用於 6 應用s: USB Industrial Instrumentation, Portable Medical Accessories, USB Data Loggers, Wearable Sensor Controllers, USB Power and Charging Controls, USB-to-Serial Protocol Bridges.
USB Industrial Instrumentation
The PIC24FJ32GU205-I/M4 fits compact USB-connected instruments that must combine control processing with data transfer. Its 16-bit CPU operates up to 32 MHz, providing 16 MIPS while 38 I/O pins support sensors, status indicators, and operator controls. Full Speed USB 2.0 Host, Device, and OTG operation enables direct connectivity to computers, service tools, or removable storage without an external USB controller. The 32 KB ECC Flash and 8 KB RAM provide room for calibration data, local logging, and control firmware. For industrial equipment, protect analog inputs from transients, isolate exposed interfaces, and observe the full temperature requirements of the installation.
推薦
Portable Medical Accessories
The PIC24FJ32GU205-I/M4 is appropriate for compact medical accessories that need USB connectivity, moderate control processing, and low standby demand. At 32 MHz and 16 MIPS, the controller can supervise sensor acquisition, user-interface states, and data packaging while Full Speed USB provides a wired interface to a host or charger. The GU2 family can retain core-independent peripheral activity during sleep, and family sleep current can fall to a few hundred nanoamperes, supporting battery-conscious operation. The 48-UQFN package reduces board area, while 38 I/O pins leave room for sensors and indicators. Medical designs still require appropriate electrical isolation, safety validation, and applicable regulatory controls.
推薦
USB Data Loggers
The PIC24FJ32GU205-I/M4 works well in portable data loggers that periodically record sensor information and transfer it over USB. Its 16-bit architecture and 32 MHz maximum frequency provide more computational headroom than an 8-bit controller for sampling control, timestamps, buffering, and file formatting. The 32 KB ECC Flash supports firmware and parameter storage, while 8 KB RAM accommodates active acquisition and transfer buffers. Full Speed USB Device operation enables a direct connection to a computer, and the family’s low-power sleep behavior can reduce consumption between measurement intervals. When defining the product, size RAM and Flash for protocol overhead, use wear-aware storage practices, and include ESD protection on externally accessible connectors.
推薦
Wearable Sensor Controllers
The PIC24FJ32GU205-I/M4 suits wearable and body-adjacent sensor controllers where a compact package, 38 I/O pins, and USB connectivity must coexist with limited power budgets. The 32 MHz PIC24 CPU can handle sensor fusion, filtering, and control tasks, while the GU2 low-power architecture supports sleep operation with core-independent peripherals retained. A 6 x 6 mm 48-UQFN package helps minimize board area in compact products. The 2 V to 3.6 V supply range is compatible with many 3.3 V wearable power systems, although battery regulation and charger design remain system-level responsibilities. Confirm skin-contact safety requirements, protection against ESD and moisture, and the complete device temperature specification before production release.
推薦
USB Power and Charging Controls
The PIC24FJ32GU205-I/M4 can coordinate USB-connected power accessories, peripheral control, and status reporting in compact equipment. Its Full Speed USB Device and OTG support allows firmware to enumerate as a USB device and exchange control information with a host. The 16-bit CPU at 32 MHz provides enough throughput for supervisory logic, while 38 I/O pins can support relay control, button input, status LEDs, and inter-device signaling. The low-power sleep capability is valuable when the accessory remains connected but is mostly inactive. Keep high-current switching stages outside the MCU, separate noisy power paths from sensitive signal routing, and use the manufacturer electrical limits when designing protection around the USB pins.
推薦
USB-to-Serial Protocol Bridges
The PIC24FJ32GU205-I/M4 provides a compact controller platform for USB-to-serial bridges used in instrumentation, service equipment, and configuration tools. Full Speed USB Device operation supports host enumeration and data transfer, while the 32 MHz 16-bit CPU can manage protocol framing, buffering, and status reporting. Its 38 I/O pins offer multiple serial, interrupt, and control lines, and the 32 KB ECC Flash plus 8 KB RAM is adequate for protocol state and moderate buffering. The 48-UQFN package supports compact bridge products but requires careful exposed-pad soldering and controlled USB trace impedance. Firmware should include enumeration handling, timeout recovery, and robust protection against malformed host commands.
推薦
推薦產品摘要
工程參考資料,適用於 PIC24FJ32GU205-I/M4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | PIC24FJ32GU205T-I/M4 | PIC24FJ32GU205T-E/M4 | PIC24FJ32GP205-I/M4 | PIC24FJ32GU204-I/M4 |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-UQFN (6 x 6 mm) | 48-pin | 48-UQFN (6 x 6 mm) |
| CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz class | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Program Memory | 32 KB ECC Flash | 32 KB Flash | 32 KB Flash | 32 KB ECC Flash | 30 KB Flash |
| USB Support | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | Full Speed USB 2.0 Host/Device/OTG | No GU205 USB feature set | Full Speed USB 2.0 Host/Device/OTG |
| Temperature Designation | I / Industrial | I / Industrial | E / Extended temperature | I / Industrial | I / Industrial |
主要差異化特點
- Combines GU2 USB capability with a 32 MHz 16-bit CPU (對比PIC24FJ32GP205-I/M4)
- Direct industrial-temperature ordering option (對比PIC24FJ32GU205T-E/M4)
- Matches the closest listed GU205 ordering configuration (對比PIC24FJ32GU205T-I/M4)
- Four kilobytes more Flash than the adjacent GU204 option (對比PIC24FJ32GU204-I/M4)
設計說明
Route USB D+ and D- as a short, continuous differential pair with the impedance required by the connector and cable. Keep the pair away from switching-regulator inductors, crystal-clock traces, and high-current switching nodes. Place the input and decoupling capacitors directly beside the corresponding power pins, and follow the manufacturer’s exposed-pad and thermal-via layout to avoid soldering voids beneath the UQFN device.
Estimated: the UQFN exposed pad provides the principal thermal path, so thermal performance depends strongly on the PCB copper area and via count specified by the manufacturer package drawing. Treat the tab and exposed pad as one electrical and thermal land pattern, use a suitable reflow profile, and inspect the underside for voids after assembly. Do not add an unreviewed heatsink or copper modification that may interfere with adjacent return paths.
Use the 2 V to 3.6 V operating range as the device-level constraint, but design the complete board around the minimum voltage required by the USB transceiver, regulator, sensors, and external load. Provide local high-frequency bypassing at every supply pin and verify startup and brownout behavior across the full voltage range. Low-power claims should be validated with the intended peripheral configuration because USB activity and active peripherals change the measured current.
Do not substitute PIC24FJ32GP205 for the GU205 without reviewing USB requirements, and do not treat the T ordering code as a purely cosmetic change without checking reel orientation, labeling, and traceability. Verify programming pins, exposed-pad connection, supply pins, and USB pin assignments in the manufacturer pin table for every revision of the PCB before releasing production firmware.
合規資訊
The industrial-temperature suffix does not by itself establish automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer product documentation.