R5F109LDKFB#V0 - 16-Bit MCU with LIN | Renesas Electronics
Teilenummer: R5F109LDKFB#V0 ✗ AbgekündigtR5F109LDKFB#V0 Übersicht
A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and input/output interfaces on one device. The RL78/F12 belongs to the hierarchy of 16-bit MCU → embedded microcontroller → programmable semiconductor. Such devices are used where deterministic control, low standby consumption, communication capability, and compact embedded logic are more important than the processing power of a higher-end processor.
The R5F109LDKFB#V0 distinguishes itself through its built-in LIN module, which provides a dedicated vehicle-network interface for automotive electronic control units. The RL78/F12 family also includes flash-memory CRC calculation, illegal-memory-access detection, RAM guard, analog-to-digital converter testing, and other mechanisms supporting functional-safety-oriented designs. Its low-consumption architecture is intended to reduce operating energy in compact embedded systems.
Renesas describes the RL78/F12 family as spanning 20-pin to 64-pin devices with flash-memory configurations from 8 KB to 64 KB. Because the exact flash size, RAM size, clock rating, converter resolution, and electrical limits for the V0 ordering code are not stated in the accessible product records, designers should confirm those parameters against the manufacturer datasheet before compiling production firmware or qualifying the device for a new design.
Typical uses include LIN-connected automotive body electronics, sensor interfaces, compact motor or actuator controllers, low-power instrument clusters, and industrial modules that need local control without a separate communications processor. An embedded LIN interface can reduce system complexity by combining the controller and network transceiver functions required for a LIN node when the required electrical and timing conditions are satisfied.
For a new PCB, do not assume that an obsolete ordering code can be ordered without a controlled legacy supply. Confirm availability, the exact package drawing, pin multiplexing, flash programming method, and functional-safety documentation before committing the layout. For an existing compatible assembly, the related H0 and X0 ordering codes should be checked for package and temperature-code differences before substitution.
This page consolidates the available manufacturer-family information, lifecycle status, package constraints, and order-code references into an engineering-focused selection guide. It also distinguishes what is confirmed for the RL78/F12 family from parameters that must be checked in the exact R5F109LDKFB#V0 documentation before design release.
Drop-in-Alternativen für R5F109LDKFB#V0 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
R5F109LDKFB#H0
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
R5F109LDKFB#X0
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
R5F109LDKFB#V0 Grenzwerte & elektrische Eigenschaften
| Device Type | 16-bit microcontroller |
| Product Family | RL78/F12 |
| Program Memory Range by Family | 8 KB to 64 KB flash |
| Package Pin Range by Family | 20 to 64 pins |
| Communication Interface | Built-in LIN module |
| Package Type | LFQFP |
| Flash CRC Function | Supported by RL78/F12 family |
| Illegal Memory Access Detection | Supported by RL78/F12 family |
| RAM Guard | Supported by RL78/F12 family |
| A/D Converter Testing | Supported by RL78/F12 family |
| Lebenszyklusstatus | Obsolete |
| Montageart | Surface mount |
R5F109LDKFB#V0 lfqfp Pinbelegungsleitfaden
Pinbelegung für R5F109LDKFB#V0 (lfqfp-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für R5F109LDKFB#V0.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
R5F109LDKFB#V0 ist geeignet für 6 Anwendungs: Automotive LIN Body Controller, Low-Power Sensor Interface, Automotive Actuator Controller, Vehicle Instrument Cluster Module, Industrial LIN Remote Node, Functional-Safety-Oriented Embedded Control.
Automotive LIN Body Controller
The R5F109LDKFB#V0 fits compact automotive body-control nodes because the RL78/F12 family combines a 16-bit embedded processor with a built-in LIN module. The interface supports communication with distributed vehicle subsystems without requiring a separate network controller for basic LIN-connected functions. This integration can simplify the hardware allocation around body, comfort, and accessory modules. The family’s low-consumption design is particularly useful in systems that spend substantial time in standby between vehicle activity. For an existing LFQFP design, preserve the footprint and verify the exact package drawing before releasing a board revision.
Empfohlen
Low-Power Sensor Interface
The R5F109LDKFB#V0 can serve as the local controller for a compact sensor module that must combine local acquisition, control logic, and network reporting. Its 16-bit RL78/F12 architecture is suited to embedded automotive and industrial sensing, while the family’s low-consumption focus helps manage energy when the module is not continuously active. The built-in LIN interface can connect the node to a vehicle network when the electrical transceiver arrangement is appropriate. Use the device-specific pin and peripheral tables to assign analog inputs, and verify conversion performance and operating limits against the exact ordering code.
Empfohlen
Automotive Actuator Controller
R5F109LDKFB#V0 is appropriate for small actuator-control ECUs that require deterministic embedded logic, network connectivity, and economical integration. The built-in LIN module supports communication with a vehicle’s distributed control network, while the 16-bit core can coordinate inputs, outputs, and protection logic around the actuator. The RL78/F12 family’s low-consumption architecture can reduce energy use in intermittent-duty systems. Design the output driver and protection circuitry separately, then confirm pin multiplexing, timing, and diagnostic behavior using the manufacturer documentation for the exact device.
Empfohlen
Vehicle Instrument Cluster Module
The R5F109LDKFB#V0 can support compact vehicle instrument and status modules where local processing is needed alongside network connectivity. Its 16-bit RL78/F12 architecture provides an embedded control platform, and the built-in LIN module allows the module to exchange commands or status information with a distributed vehicle network. Low-consumption characteristics help in modules that operate intermittently rather than continuously. A cluster implementation still requires application-specific display drivers, input conditioning, fault handling, and EMC design. Confirm the available I/O and exact peripheral allocation before assigning display or switch connections.
Empfohlen
Industrial LIN Remote Node
The R5F109LDKFB#V0 can be adapted to an industrial remote-node design that benefits from the same LIN-oriented integration used in automotive systems. The built-in LIN module reduces the need for a separate communication controller, and the 16-bit architecture can handle local sequencing, diagnostics, and I/O management. The RL78/F12 family’s low-consumption design is advantageous in distributed installations where each node may operate for only part of the time. The design must still satisfy the electrical requirements of the target LIN network and should use the exact manufacturer timing and pin information.
Empfohlen
Functional-Safety-Oriented Embedded Control
R5F109LDKFB#V0 belongs to an RL78/F12 family that includes mechanisms associated with functional-safety-oriented control, including flash CRC calculation, illegal-memory-access detection, RAM guard, and A/D converter testing. These capabilities can support monitoring and fault-control logic in an appropriate automotive or industrial system. They do not replace a complete safety case, certification review, or application-specific safety analysis. Engineers should confirm which functions are enabled in the exact ordering code and integrate them into the system’s diagnostic strategy, memory partition plan, and production-test process.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für R5F109LDKFB#V0 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | R5F109LDKFB#H0 | R5F109LDKFB#X0 |
|---|---|---|---|
| Package | LFQFP | LFQFP | LFQFP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Microcontroller Family | RL78/F12 | RL78/F12 | RL78/F12 |
| CPU Architecture | 16-bit | 16-bit | 16-bit |
| Communication Interface | Built-in LIN module | Built-in LIN module | Built-in LIN module |
| Family Flash Range | 8 KB to 64 KB | 8 KB to 64 KB | 8 KB to 64 KB |
| Family Pin Range | 20 to 64 pins | 20 to 64 pins | 20 to 64 pins |
| Functional-Safety Functions | Flash CRC, illegal-memory-access detection, RAM guard, and A/D converter testing | Flash CRC, illegal-memory-access detection, RAM guard, and A/D converter testing | Flash CRC, illegal-memory-access detection, RAM guard, and A/D converter testing |
| Ordering-Code Qualification | #V0 | #H0; qualification details require manufacturer confirmation | #X0; qualification details require manufacturer confirmation |
Wichtigste Unterscheidungsmerkmale
- Directly documented obsolete lifecycle state (vs. R5F109LDKFB#H0)
- Same RL78/F12 integration for LIN-connected control (vs. R5F109LDKFB#X0)
- Family-level functional-safety support (vs. R5F109LDKFB#H0)
Designhinweise
Do not treat a shared RL78/F12 family name as proof that every suffix code is interchangeable. Before replacing R5F109LDKFB#V0, compare the exact package dimensions, pin assignments, temperature grade, qualification status, firmware behavior, and supply conditions for the candidate ordering code. The H0 and X0 records establish same-family candidates, but they do not expose a complete suffix-code comparison in the accessible product information.
Preserve the existing LFQFP footprint only after checking the mechanical drawing and exposed-pad requirements for the exact ordering code. Place decoupling and signal-path components according to the manufacturer application guidance, keep switching or high-current paths away from sensitive inputs, and provide clean ground return paths. Because the complete numbered pin list is not established in the accessible records, do not release a new layout from family-level pin-count information alone.
Design the power tree around the device-specific operating and I/O voltage limits rather than the broader RL78/F12 family limits. Include local bypass capacitors close to the supply pins, validate startup and brownout behavior with the selected regulator, and account for voltage-drop and return-current effects in the PCB. Exact voltage values and capacitor requirements must be taken from the ordering-code datasheet and the relevant reference design.
Keep the LIN connection and associated protection network away from sensitive analog or control traces, and route it as a controlled communication interface with a continuous return path. Confirm whether an external transceiver is required for the intended node configuration, follow the manufacturer’s recommended termination and protection arrangement, and verify signal integrity against the actual bus topology. The built-in LIN module should not be interpreted as a complete external bus interface without the required board-level circuitry.
For functional-safety-oriented systems, inventory the enabled flash CRC calculation, illegal-memory-access detection, RAM guard, and A/D converter testing functions rather than assuming that every family feature is active in every ordering code. Integrate the applicable mechanisms into the diagnostic architecture and validate them with fault-injection tests. These mechanisms support a safety design but do not independently establish compliance for an end product.
Compliance-Informationen
The retrieved manufacturer information identifies automotive-interface and functional-safety capabilities but does not provide an explicit compliance declaration for the V0 ordering code. Compliance status must be confirmed from the exact manufacturer product documentation.